! Started logfile: J1453-2522_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:44 2019 obs J1453-2522_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1453-2522_S_2017_08_12_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.590873 visibilities/baseline/integration-bin. ! Found source: J1453-2522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 5956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453-2522_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875770Jy sigma=0.006030 ! Fit after self-cal, rms=0.857113Jy sigma=0.005911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.224 mas, bmaj=6.582 mas, bpa=-3.86 degrees ! Estimated noise=2279.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111443 Jy ! Component: 100 - total flux cleaned = 0.140603 Jy ! Total flux subtracted in 100 components = 0.140603 Jy ! Clean residual min=-0.009364 max=0.014067 Jy/beam ! Clean residual mean=-0.000084 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.140603 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.140603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105450Jy sigma=0.000690 ! Fit after self-cal, rms=0.105447Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=7.435 mas, bpa=-3.722 degrees ! Estimated noise=1541.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190453 Jy ! Component: 100 - total flux cleaned = 0.0301987 Jy ! Component: 150 - total flux cleaned = 0.0373757 Jy ! Component: 200 - total flux cleaned = 0.0421108 Jy ! Total flux subtracted in 200 components = 0.0421108 Jy ! Clean residual min=-0.005701 max=0.006294 Jy/beam ! Clean residual mean=-0.000031 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.182714 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 56 components and 0.182714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101944Jy sigma=0.000662 ! Fit after self-cal, rms=0.101903Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.15 KP 1.01 ! LA 1.02 MK 1.04 NL 0.90 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.15 KP 1.00 ! LA 0.95 MK 1.04 NL 1.04 OV 1.05 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 0.96 ! LA 0.94 MK 1.02 NL 0.94 OV 0.93 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.101903Jy sigma=0.000661 ! Fit after self-cal, rms=0.104397Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=7.466 mas, bpa=-2.545 degrees ! Estimated noise=1560.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100726 Jy ! Component: 100 - total flux cleaned = 0.00113821 Jy ! Component: 150 - total flux cleaned = 0.0010815 Jy ! Component: 200 - total flux cleaned = 0.00108208 Jy ! Total flux subtracted in 200 components = 0.00108208 Jy ! Clean residual min=-0.004692 max=0.003927 Jy/beam ! Clean residual mean=0.000003 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.183796 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.183796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104303Jy sigma=0.000660 ! Fit after self-cal, rms=0.104383Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104383Jy sigma=0.000660 ! Fit after self-cal, rms=0.105303Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=7.466 mas, bpa=-2.513 degrees ! Estimated noise=1569.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381829 Jy ! Component: 100 - total flux cleaned = 0.000379703 Jy ! Component: 150 - total flux cleaned = 0.000422936 Jy ! Component: 200 - total flux cleaned = 0.00046155 Jy ! Total flux subtracted in 200 components = 0.00046155 Jy ! Clean residual min=-0.004402 max=0.003370 Jy/beam ! Clean residual mean=0.000004 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.184258 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.184258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105265Jy sigma=0.000657 ! Fit after self-cal, rms=0.105275Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171198 Jy ! Component: 100 - total flux cleaned = 0.000207585 Jy ! Component: 150 - total flux cleaned = 0.000242624 Jy ! Component: 200 - total flux cleaned = 0.000307019 Jy ! Total flux subtracted in 200 components = 0.000307019 Jy ! Clean residual min=-0.004370 max=0.003356 Jy/beam ! Clean residual mean=0.000004 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.184565 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.184565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105252Jy sigma=0.000657 ! Fit after self-cal, rms=0.105250Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105250Jy sigma=0.000657 ! Fit after self-cal, rms=0.106211Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=7.464 mas, bpa=-2.503 degrees ! Estimated noise=1570.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.96021e-05 Jy ! Component: 100 - total flux cleaned = 0.00024627 Jy ! Component: 150 - total flux cleaned = 0.000313582 Jy ! Component: 200 - total flux cleaned = 0.000407425 Jy ! Total flux subtracted in 200 components = 0.000407425 Jy ! Clean residual min=-0.004209 max=0.003610 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.184972 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.184972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106186Jy sigma=0.000656 ! Fit after self-cal, rms=0.106202Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.5419e-05 Jy ! Component: 100 - total flux cleaned = 8.50123e-05 Jy ! Component: 150 - total flux cleaned = 0.000113936 Jy ! Component: 200 - total flux cleaned = 0.000140914 Jy ! Total flux subtracted in 200 components = 0.000140914 Jy ! Clean residual min=-0.004209 max=0.003589 Jy/beam ! Clean residual mean=0.000004 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.185113 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.185113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106186Jy sigma=0.000656 ! Fit after self-cal, rms=0.106186Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106186Jy sigma=0.000656 ! Fit after self-cal, rms=0.106243Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.93 mas, bmaj=18.42 mas, bpa=-0.3651 degrees ! Estimated noise=2102.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.31553e-05 Jy ! Component: 100 - total flux cleaned = -6.5479e-05 Jy ! Component: 150 - total flux cleaned = -6.76641e-05 Jy ! Component: 200 - total flux cleaned = -8.82925e-05 Jy ! Total flux subtracted in 200 components = -8.82925e-05 Jy ! Clean residual min=-0.004626 max=0.004350 Jy/beam ! Clean residual mean=0.000007 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.185025 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 122 components and 0.185025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106246Jy sigma=0.000656 ! Fit after self-cal, rms=0.106240Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110698 Jy ! Component: 100 - total flux cleaned = -0.000110348 Jy ! Component: 150 - total flux cleaned = -0.000110524 Jy ! Component: 200 - total flux cleaned = -0.000127507 Jy ! Total flux subtracted in 200 components = -0.000127507 Jy ! Clean residual min=-0.004584 max=0.004356 Jy/beam ! Clean residual mean=0.000007 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.184898 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 126 components and 0.184898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106242Jy sigma=0.000656 ! Fit after self-cal, rms=0.106238Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=7.464 mas, bpa=-2.512 degrees ! Estimated noise=1568.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.708 x 7.464 at -2.512 degrees (North through East) ! Clean map min=-0.0041237 max=0.14242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=6.521 mas, bpa=-2.634 degrees ! Estimated noise=2272.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112801 Jy ! Component: 100 - total flux cleaned = 0.141902 Jy ! Component: 150 - total flux cleaned = 0.156867 Jy ! Component: 200 - total flux cleaned = 0.16638 Jy ! Total flux subtracted in 200 components = 0.16638 Jy ! Clean residual min=-0.007297 max=0.006915 Jy/beam ! Clean residual mean=-0.000034 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.16638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.16638 Jy ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=7.464 mas, bpa=-2.512 degrees ! Estimated noise=1568.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0077139 Jy ! Component: 100 - total flux cleaned = 0.0122002 Jy ! Component: 150 - total flux cleaned = 0.0150267 Jy ! Component: 200 - total flux cleaned = 0.0168363 Jy ! Total flux subtracted in 200 components = 0.0168363 Jy ! Clean residual min=-0.004369 max=0.003745 Jy/beam ! Clean residual mean=-0.000005 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.183216 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 49 components and 0.183216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.93 mas, bmaj=18.42 mas, bpa=-0.3651 degrees ! Estimated noise=2102.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121667 Jy ! Component: 100 - total flux cleaned = 0.00128389 Jy ! Component: 150 - total flux cleaned = 0.00134383 Jy ! Component: 200 - total flux cleaned = 0.00134388 Jy ! Total flux subtracted in 200 components = 0.00134388 Jy ! Clean residual min=-0.004582 max=0.004364 Jy/beam ! Clean residual mean=0.000003 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.18456 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.63151e-06 Jy ! Component: 100 - total flux cleaned = -2.41157e-05 Jy ! Component: 150 - total flux cleaned = -2.34386e-05 Jy ! Component: 200 - total flux cleaned = -2.42333e-05 Jy ! Total flux subtracted in 200 components = -2.42333e-05 Jy ! Clean residual min=-0.004518 max=0.004374 Jy/beam ! Clean residual mean=0.000003 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.184536 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.184536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=7.464 mas, bpa=-2.512 degrees ! Estimated noise=1568.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342933 Jy ! Component: 100 - total flux cleaned = -0.000258852 Jy ! Component: 150 - total flux cleaned = -0.000181705 Jy ! Component: 200 - total flux cleaned = -0.000145692 Jy ! Total flux subtracted in 200 components = -0.000145692 Jy ! Clean residual min=-0.004177 max=0.003667 Jy/beam ! Clean residual mean=-0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.18439 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.18439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106244Jy sigma=0.000656 ! Fit after self-cal, rms=0.106234Jy sigma=0.000656 wmodel J1453-2522_S_2017_08_12_pus_map.mod ! Writing 77 model components to file: J1453-2522_S_2017_08_12_pus_map.mod wobs J1453-2522_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1453-2522_S_2017_08_12_pus_uvs.fits wwins J1453-2522_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1453-2522_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014109 Jy ! Component: 100 - total flux cleaned = -0.00196953 Jy ! Component: 150 - total flux cleaned = -0.00180078 Jy ! Component: 200 - total flux cleaned = -0.00132288 Jy ! Component: 250 - total flux cleaned = -0.00122153 Jy ! Component: 300 - total flux cleaned = -0.00102143 Jy ! Component: 350 - total flux cleaned = -0.000828525 Jy ! Component: 400 - total flux cleaned = -0.000690252 Jy ! Component: 450 - total flux cleaned = -0.000601217 Jy ! Component: 500 - total flux cleaned = -0.000512888 Jy ! Component: 550 - total flux cleaned = -0.000596587 Jy ! Component: 600 - total flux cleaned = -0.000470892 Jy ! Component: 650 - total flux cleaned = -0.000389532 Jy ! Component: 700 - total flux cleaned = -0.000389686 Jy ! Component: 750 - total flux cleaned = -0.000350548 Jy ! Component: 800 - total flux cleaned = -0.000312232 Jy ! Component: 850 - total flux cleaned = -0.000275234 Jy ! Component: 900 - total flux cleaned = -0.000203207 Jy ! Component: 950 - total flux cleaned = -0.000168501 Jy ! Component: 1000 - total flux cleaned = -0.000306524 Jy ! Component: 1050 - total flux cleaned = -0.000238497 Jy ! Component: 1100 - total flux cleaned = -0.000238203 Jy ! Component: 1150 - total flux cleaned = -0.000238675 Jy ! Component: 1200 - total flux cleaned = -0.00030269 Jy ! Component: 1250 - total flux cleaned = -0.000271445 Jy ! Component: 1300 - total flux cleaned = -0.000302235 Jy ! Component: 1350 - total flux cleaned = -0.000363283 Jy ! Component: 1400 - total flux cleaned = -0.000362823 Jy ! Component: 1450 - total flux cleaned = -0.000363061 Jy ! Component: 1500 - total flux cleaned = -0.000391805 Jy ! Component: 1550 - total flux cleaned = -0.000362913 Jy ! Component: 1600 - total flux cleaned = -0.000419624 Jy ! Component: 1650 - total flux cleaned = -0.000447313 Jy ! Component: 1700 - total flux cleaned = -0.000447906 Jy ! Component: 1750 - total flux cleaned = -0.000556913 Jy ! Component: 1800 - total flux cleaned = -0.000530144 Jy ! Component: 1850 - total flux cleaned = -0.000530155 Jy ! Component: 1900 - total flux cleaned = -0.000582555 Jy ! Component: 1950 - total flux cleaned = -0.000582468 Jy ! Component: 2000 - total flux cleaned = -0.000582463 Jy ! Component: 2050 - total flux cleaned = -0.000557325 Jy ! Component: 2100 - total flux cleaned = -0.000582449 Jy ! Component: 2150 - total flux cleaned = -0.000558051 Jy ! Component: 2200 - total flux cleaned = -0.000606419 Jy ! Component: 2250 - total flux cleaned = -0.000630312 Jy ! Component: 2300 - total flux cleaned = -0.000630102 Jy ! Component: 2350 - total flux cleaned = -0.000606209 Jy ! Component: 2400 - total flux cleaned = -0.000676047 Jy ! Component: 2450 - total flux cleaned = -0.000721956 Jy ! Component: 2500 - total flux cleaned = -0.000721813 Jy ! Component: 2550 - total flux cleaned = -0.000721823 Jy ! Component: 2600 - total flux cleaned = -0.00085624 Jy ! Component: 2650 - total flux cleaned = -0.000900362 Jy ! Component: 2700 - total flux cleaned = -0.000922282 Jy ! Component: 2750 - total flux cleaned = -0.000944019 Jy ! Component: 2800 - total flux cleaned = -0.000987322 Jy ! Component: 2850 - total flux cleaned = -0.00109405 Jy ! Component: 2900 - total flux cleaned = -0.00115761 Jy ! Component: 2950 - total flux cleaned = -0.00124164 Jy ! Component: 3000 - total flux cleaned = -0.00136652 Jy ! Component: 3050 - total flux cleaned = -0.00142833 Jy ! Component: 3100 - total flux cleaned = -0.00144868 Jy ! Component: 3150 - total flux cleaned = -0.00159058 Jy ! Component: 3200 - total flux cleaned = -0.0016308 Jy ! Component: 3250 - total flux cleaned = -0.00165071 Jy ! Component: 3300 - total flux cleaned = -0.00170989 Jy ! Component: 3350 - total flux cleaned = -0.00176856 Jy ! Component: 3400 - total flux cleaned = -0.0017684 Jy ! Component: 3450 - total flux cleaned = -0.00180718 Jy ! Component: 3500 - total flux cleaned = -0.00184552 Jy ! Component: 3550 - total flux cleaned = -0.00186455 Jy ! Component: 3600 - total flux cleaned = -0.00188353 Jy ! Component: 3650 - total flux cleaned = -0.00192111 Jy ! Component: 3700 - total flux cleaned = -0.00193972 Jy ! Component: 3750 - total flux cleaned = -0.00197684 Jy ! Component: 3800 - total flux cleaned = -0.00201379 Jy ! Component: 3850 - total flux cleaned = -0.00208719 Jy ! Component: 3900 - total flux cleaned = -0.00210545 Jy ! Component: 3950 - total flux cleaned = -0.00210532 Jy ! Component: 4000 - total flux cleaned = -0.00212346 Jy ! Component: 4050 - total flux cleaned = -0.00214143 Jy ! Total flux subtracted in 4096 components = -0.00223073 Jy ! Clean residual min=-0.001210 max=0.001079 Jy/beam ! Clean residual mean=-0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.18216 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 350 components and 0.18216 Jy ![Exited script file: muppet] wmap "J1453-2522_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.708 x 7.464 at -2.512 degrees (North through East) ! Clean map min=-0.0028178 max=0.1445 Jy/beam ! Writing clean map to FITS file: J1453-2522_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144496 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301167 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.625276 0.625276 1.25055 2.5011 5.00221 10.0044 20.0088 40.0177 80.0353 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.708 x 7.464 at -2.512 degrees (North through East) ! Clean map min=-0.0028178 max=0.1445 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1453-2522_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:01:48 2019