! Started logfile: J1453-2204_S_2017_08_05_pus_uvs.log on Thu May 9 19:31:42 2019 obs J1453-2204_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1453-2204_S_2017_08_05_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782648 visibilities/baseline/integration-bin. ! Found source: J1453-2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 20568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453-2204_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 970 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932461Jy sigma=0.006678 ! Fit after self-cal, rms=0.912958Jy sigma=0.006551 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=6.847 mas, bpa=-5.187 degrees ! Estimated noise=1238.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660877 Jy ! Component: 100 - total flux cleaned = 0.088512 Jy ! Total flux subtracted in 100 components = 0.088512 Jy ! Clean residual min=-0.007134 max=0.014078 Jy/beam ! Clean residual mean=-0.000032 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 0.088512 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.088512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103679Jy sigma=0.000696 ! Fit after self-cal, rms=0.103568Jy sigma=0.000695 ! Inverting map ! Added new window around map position (3, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148072 Jy ! Component: 100 - total flux cleaned = 0.023287 Jy ! Total flux subtracted in 100 components = 0.023287 Jy ! Clean residual min=-0.004591 max=0.008913 Jy/beam ! Clean residual mean=-0.000022 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.111799 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.111799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100732Jy sigma=0.000674 ! Fit after self-cal, rms=0.100573Jy sigma=0.000673 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747753 Jy ! Component: 100 - total flux cleaned = 0.0115192 Jy ! Total flux subtracted in 100 components = 0.0115192 Jy ! Clean residual min=-0.003803 max=0.005674 Jy/beam ! Clean residual mean=-0.000017 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.123318 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.123318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099872Jy sigma=0.000668 ! Fit after self-cal, rms=0.099806Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=8.088 mas, bpa=-5.55 degrees ! Estimated noise=794.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460708 Jy ! Component: 100 - total flux cleaned = 0.0058364 Jy ! Component: 150 - total flux cleaned = 0.00624934 Jy ! Component: 200 - total flux cleaned = 0.00667318 Jy ! Total flux subtracted in 200 components = 0.00667318 Jy ! Clean residual min=-0.003482 max=0.004029 Jy/beam ! Clean residual mean=-0.000022 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.129991 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 0.129991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099537Jy sigma=0.000666 ! Fit after self-cal, rms=0.099506Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.06 KP 1.04 ! LA 1.03 MK 1.01 NL 0.90 OV 1.10 ! PT 1.00 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.08 KP 0.98 ! LA 0.97 MK 1.06 NL 1.03 OV 1.04 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.22 KP 0.87 ! LA 0.77 MK 1.03 NL 1.13 OV 0.97 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.83 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.099506Jy sigma=0.000666 ! Fit after self-cal, rms=0.100601Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=8.059 mas, bpa=-5.166 degrees ! Estimated noise=809.555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209564 Jy ! Component: 100 - total flux cleaned = -4.04597e-05 Jy ! Component: 150 - total flux cleaned = -0.000247417 Jy ! Component: 200 - total flux cleaned = -0.000460671 Jy ! Total flux subtracted in 200 components = -0.000460671 Jy ! Clean residual min=-0.002131 max=0.002308 Jy/beam ! Clean residual mean=-0.000010 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.129531 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.129531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100550Jy sigma=0.000662 ! Fit after self-cal, rms=0.100544Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100544Jy sigma=0.000662 ! Fit after self-cal, rms=0.102530Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.995 mas, bpa=-4.946 degrees ! Estimated noise=810.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318879 Jy ! Component: 100 - total flux cleaned = 0.000109864 Jy ! Component: 150 - total flux cleaned = -0.000104394 Jy ! Component: 200 - total flux cleaned = -0.000267211 Jy ! Total flux subtracted in 200 components = -0.000267211 Jy ! Clean residual min=-0.002061 max=0.002045 Jy/beam ! Clean residual mean=-0.000006 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.129263 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.129263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102505Jy sigma=0.000661 ! Fit after self-cal, rms=0.102529Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194822 Jy ! Component: 100 - total flux cleaned = 2.13171e-05 Jy ! Component: 150 - total flux cleaned = -0.000154427 Jy ! Component: 200 - total flux cleaned = -0.000288425 Jy ! Total flux subtracted in 200 components = -0.000288425 Jy ! Clean residual min=-0.002017 max=0.002029 Jy/beam ! Clean residual mean=-0.000007 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.128975 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.128975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102512Jy sigma=0.000661 ! Fit after self-cal, rms=0.102503Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102503Jy sigma=0.000661 ! Fit after self-cal, rms=0.103497Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.971 mas, bpa=-4.772 degrees ! Estimated noise=808.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194279 Jy ! Component: 100 - total flux cleaned = 2.11647e-05 Jy ! Component: 150 - total flux cleaned = -0.000128101 Jy ! Component: 200 - total flux cleaned = -0.000236831 Jy ! Total flux subtracted in 200 components = -0.000236831 Jy ! Clean residual min=-0.002002 max=0.002018 Jy/beam ! Clean residual mean=-0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.128738 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.128738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103482Jy sigma=0.000660 ! Fit after self-cal, rms=0.103489Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147852 Jy ! Component: 100 - total flux cleaned = 7.28689e-06 Jy ! Component: 150 - total flux cleaned = -7.49457e-05 Jy ! Component: 200 - total flux cleaned = -9.31493e-05 Jy ! Total flux subtracted in 200 components = -9.31493e-05 Jy ! Clean residual min=-0.001954 max=0.001994 Jy/beam ! Clean residual mean=-0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.128645 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.128645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103479Jy sigma=0.000660 ! Fit after self-cal, rms=0.103475Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103475Jy sigma=0.000660 ! Fit after self-cal, rms=0.103296Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=18.76 mas, bpa=-2.732 degrees ! Estimated noise=1041.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212244 Jy ! Component: 100 - total flux cleaned = -0.000247503 Jy ! Component: 150 - total flux cleaned = -0.000297131 Jy ! Component: 200 - total flux cleaned = -0.000298218 Jy ! Total flux subtracted in 200 components = -0.000298218 Jy ! Clean residual min=-0.001873 max=0.001842 Jy/beam ! Clean residual mean=-0.000010 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.128347 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.128347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103291Jy sigma=0.000660 ! Fit after self-cal, rms=0.103290Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.50872e-05 Jy ! Component: 100 - total flux cleaned = -7.70327e-05 Jy ! Component: 150 - total flux cleaned = -9.2755e-05 Jy ! Component: 200 - total flux cleaned = -0.000106844 Jy ! Total flux subtracted in 200 components = -0.000106844 Jy ! Clean residual min=-0.001874 max=0.001842 Jy/beam ! Clean residual mean=-0.000011 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.12824 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.12824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103286Jy sigma=0.000660 ! Fit after self-cal, rms=0.103284Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.959 mas, bpa=-4.612 degrees ! Estimated noise=805.998 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 7.959 at -4.612 degrees (North through East) ! Clean map min=-0.001775 max=0.078536 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.374 mas, bmaj=6.736 mas, bpa=-4.154 degrees ! Estimated noise=1248.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0667564 Jy ! Component: 100 - total flux cleaned = 0.0935872 Jy ! Component: 150 - total flux cleaned = 0.108525 Jy ! Component: 200 - total flux cleaned = 0.117261 Jy ! Total flux subtracted in 200 components = 0.117261 Jy ! Clean residual min=-0.003869 max=0.004450 Jy/beam ! Clean residual mean=-0.000008 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.117261 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.117261 Jy ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.959 mas, bpa=-4.612 degrees ! Estimated noise=805.998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665854 Jy ! Component: 100 - total flux cleaned = 0.00985618 Jy ! Component: 150 - total flux cleaned = 0.0111063 Jy ! Component: 200 - total flux cleaned = 0.0113095 Jy ! Total flux subtracted in 200 components = 0.0113095 Jy ! Clean residual min=-0.002336 max=0.002231 Jy/beam ! Clean residual mean=-0.000005 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.128571 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.128571 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=18.76 mas, bpa=-2.732 degrees ! Estimated noise=1041.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250135 Jy ! Component: 100 - total flux cleaned = 0.000248669 Jy ! Component: 150 - total flux cleaned = 0.000193735 Jy ! Component: 200 - total flux cleaned = 0.000142113 Jy ! Total flux subtracted in 200 components = 0.000142113 Jy ! Clean residual min=-0.001978 max=0.002035 Jy/beam ! Clean residual mean=-0.000010 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.128713 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8311e-05 Jy ! Component: 100 - total flux cleaned = -9.36417e-05 Jy ! Component: 150 - total flux cleaned = -0.000135508 Jy ! Component: 200 - total flux cleaned = -0.000155713 Jy ! Total flux subtracted in 200 components = -0.000155713 Jy ! Clean residual min=-0.001945 max=0.001977 Jy/beam ! Clean residual mean=-0.000010 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.128557 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.128557 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.959 mas, bpa=-4.612 degrees ! Estimated noise=805.998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.218e-05 Jy ! Component: 100 - total flux cleaned = 0.000318962 Jy ! Component: 150 - total flux cleaned = 0.000319941 Jy ! Component: 200 - total flux cleaned = 0.000286674 Jy ! Total flux subtracted in 200 components = 0.000286674 Jy ! Clean residual min=-0.002063 max=0.002082 Jy/beam ! Clean residual mean=-0.000005 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.128844 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.128844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103301Jy sigma=0.000660 ! Fit after self-cal, rms=0.103299Jy sigma=0.000660 wmodel J1453-2204_S_2017_08_05_pus_map.mod ! Writing 59 model components to file: J1453-2204_S_2017_08_05_pus_map.mod wobs J1453-2204_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1453-2204_S_2017_08_05_pus_uvs.fits wwins J1453-2204_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1453-2204_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.06789e-05 Jy ! Component: 100 - total flux cleaned = -9.7931e-05 Jy ! Component: 150 - total flux cleaned = -0.0001289 Jy ! Component: 200 - total flux cleaned = -6.89721e-05 Jy ! Component: 250 - total flux cleaned = -9.69924e-05 Jy ! Component: 300 - total flux cleaned = -0.000180459 Jy ! Component: 350 - total flux cleaned = -0.000207049 Jy ! Component: 400 - total flux cleaned = -0.000233749 Jy ! Component: 450 - total flux cleaned = -0.000285182 Jy ! Component: 500 - total flux cleaned = -0.000334981 Jy ! Component: 550 - total flux cleaned = -0.000335314 Jy ! Component: 600 - total flux cleaned = -0.000358624 Jy ! Component: 650 - total flux cleaned = -0.000289136 Jy ! Component: 700 - total flux cleaned = -0.000311932 Jy ! Component: 750 - total flux cleaned = -0.000289535 Jy ! Component: 800 - total flux cleaned = -0.000245569 Jy ! Component: 850 - total flux cleaned = -0.000245335 Jy ! Component: 900 - total flux cleaned = -0.000140961 Jy ! Component: 950 - total flux cleaned = -0.000141306 Jy ! Component: 1000 - total flux cleaned = -8.04103e-05 Jy ! Component: 1050 - total flux cleaned = 3.88939e-05 Jy ! Component: 1100 - total flux cleaned = 0.000155414 Jy ! Component: 1150 - total flux cleaned = 0.000193481 Jy ! Component: 1200 - total flux cleaned = 0.00028748 Jy ! Component: 1250 - total flux cleaned = 0.000342794 Jy ! Component: 1300 - total flux cleaned = 0.000524832 Jy ! Component: 1350 - total flux cleaned = 0.000595824 Jy ! Component: 1400 - total flux cleaned = 0.000631628 Jy ! Component: 1450 - total flux cleaned = 0.00082271 Jy ! Component: 1500 - total flux cleaned = 0.000925055 Jy ! Component: 1550 - total flux cleaned = 0.000924962 Jy ! Component: 1600 - total flux cleaned = 0.000991172 Jy ! Component: 1650 - total flux cleaned = 0.00107319 Jy ! Component: 1700 - total flux cleaned = 0.00108957 Jy ! Component: 1750 - total flux cleaned = 0.00112178 Jy ! Component: 1800 - total flux cleaned = 0.00115323 Jy ! Component: 1850 - total flux cleaned = 0.00112232 Jy ! Component: 1900 - total flux cleaned = 0.00121491 Jy ! Component: 1950 - total flux cleaned = 0.00121513 Jy ! Component: 2000 - total flux cleaned = 0.00129057 Jy ! Component: 2050 - total flux cleaned = 0.00133544 Jy ! Component: 2100 - total flux cleaned = 0.00136479 Jy ! Component: 2150 - total flux cleaned = 0.00139375 Jy ! Component: 2200 - total flux cleaned = 0.00145158 Jy ! Component: 2250 - total flux cleaned = 0.00153707 Jy ! Component: 2300 - total flux cleaned = 0.00157929 Jy ! Component: 2350 - total flux cleaned = 0.00162119 Jy ! Component: 2400 - total flux cleaned = 0.00167684 Jy ! Component: 2450 - total flux cleaned = 0.00174575 Jy ! Component: 2500 - total flux cleaned = 0.00184104 Jy ! Component: 2550 - total flux cleaned = 0.00194867 Jy ! Component: 2600 - total flux cleaned = 0.00201512 Jy ! Component: 2650 - total flux cleaned = 0.0021074 Jy ! Component: 2700 - total flux cleaned = 0.00217292 Jy ! Component: 2750 - total flux cleaned = 0.00226365 Jy ! Component: 2800 - total flux cleaned = 0.00235373 Jy ! Component: 2850 - total flux cleaned = 0.00241737 Jy ! Component: 2900 - total flux cleaned = 0.00246772 Jy ! Component: 2950 - total flux cleaned = 0.00255547 Jy ! Component: 3000 - total flux cleaned = 0.00258026 Jy ! Component: 3050 - total flux cleaned = 0.00265399 Jy ! Component: 3100 - total flux cleaned = 0.00265401 Jy ! Component: 3150 - total flux cleaned = 0.00273858 Jy ! Component: 3200 - total flux cleaned = 0.00275058 Jy ! Component: 3250 - total flux cleaned = 0.00279825 Jy ! Component: 3300 - total flux cleaned = 0.0028575 Jy ! Component: 3350 - total flux cleaned = 0.00289278 Jy ! Component: 3400 - total flux cleaned = 0.00295093 Jy ! Component: 3450 - total flux cleaned = 0.00298565 Jy ! Component: 3500 - total flux cleaned = 0.00304286 Jy ! Component: 3550 - total flux cleaned = 0.00304281 Jy ! Component: 3600 - total flux cleaned = 0.00309925 Jy ! Component: 3650 - total flux cleaned = 0.00314406 Jy ! Component: 3700 - total flux cleaned = 0.00317737 Jy ! Component: 3750 - total flux cleaned = 0.00321062 Jy ! Component: 3800 - total flux cleaned = 0.00323247 Jy ! Component: 3850 - total flux cleaned = 0.00330869 Jy ! Component: 3900 - total flux cleaned = 0.00333028 Jy ! Component: 3950 - total flux cleaned = 0.00339489 Jy ! Component: 4000 - total flux cleaned = 0.00343755 Jy ! Component: 4050 - total flux cleaned = 0.00345879 Jy ! Total flux subtracted in 4096 components = 0.00351156 Jy ! Clean residual min=-0.000578 max=0.000682 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.132355 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 338 components and 0.132355 Jy ![Exited script file: muppet] wmap "J1453-2204_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 7.959 at -4.612 degrees (North through East) ! Clean map min=-0.0013751 max=0.077259 Jy/beam ! Writing clean map to FITS file: J1453-2204_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0772586 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.7378 0.7378 1.4756 2.9512 5.9024 11.8048 23.6096 47.2192 94.4384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 7.959 at -4.612 degrees (North through East) ! Clean map min=-0.0013751 max=0.077259 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1453-2204_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:31:48 2019