! Started logfile: J1453+1025_S_2017_07_16_pus_uvs.log on Thu May 9 11:11:56 2019 obs J1453+1025_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1453+1025_S_2017_07_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.658995 visibilities/baseline/integration-bin. ! Found source: J1453+1025 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 9964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453+1025_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 659 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.708198Jy sigma=0.006132 ! Fit after self-cal, rms=0.684442Jy sigma=0.005938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=6.68 mas, bpa=4.857 degrees ! Estimated noise=1167.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.245303 Jy ! Component: 100 - total flux cleaned = 0.303968 Jy ! Total flux subtracted in 100 components = 0.303968 Jy ! Clean residual min=-0.015939 max=0.024474 Jy/beam ! Clean residual mean=0.000028 rms=0.004557 Jy/beam ! Combined flux in latest and established models = 0.303968 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.303968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116132Jy sigma=0.000907 ! Fit after self-cal, rms=0.116117Jy sigma=0.000906 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.533 mas, bpa=4.776 degrees ! Estimated noise=947.399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299795 Jy ! Component: 100 - total flux cleaned = 0.0443686 Jy ! Component: 150 - total flux cleaned = 0.0526002 Jy ! Component: 200 - total flux cleaned = 0.0575991 Jy ! Total flux subtracted in 200 components = 0.0575991 Jy ! Clean residual min=-0.014318 max=0.016973 Jy/beam ! Clean residual mean=0.000021 rms=0.003705 Jy/beam ! Combined flux in latest and established models = 0.361567 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.361567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108579Jy sigma=0.000836 ! Fit after self-cal, rms=0.108571Jy sigma=0.000836 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* HN 0.94 KP 1.04 ! LA 1.00 MK 1.06 NL 0.89 OV 0.99 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.98 KP 1.01 ! LA 0.95 MK 1.07 NL 1.03 OV 1.01 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 0.98 KP 0.99 ! LA 0.99 MK 1.07 NL 0.97 OV 0.95 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00* ! LA 1.03 MK 1.07 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.108571Jy sigma=0.000836 ! Fit after self-cal, rms=0.108152Jy sigma=0.000806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=7.575 mas, bpa=5.437 degrees ! Estimated noise=950.111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330416 Jy ! Component: 100 - total flux cleaned = 0.000527506 Jy ! Component: 150 - total flux cleaned = 0.000529311 Jy ! Component: 200 - total flux cleaned = 0.000530062 Jy ! Total flux subtracted in 200 components = 0.000530062 Jy ! Clean residual min=-0.014412 max=0.015269 Jy/beam ! Clean residual mean=0.000021 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 0.362097 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.362097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108055Jy sigma=0.000805 ! Fit after self-cal, rms=0.108085Jy sigma=0.000805 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108085Jy sigma=0.000805 ! Fit after self-cal, rms=0.099490Jy sigma=0.000704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.668 mas, bpa=5.239 degrees ! Estimated noise=968.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488929 Jy ! Component: 100 - total flux cleaned = 0.00488243 Jy ! Component: 150 - total flux cleaned = 0.00475636 Jy ! Component: 200 - total flux cleaned = 0.00464683 Jy ! Total flux subtracted in 200 components = 0.00464683 Jy ! Clean residual min=-0.007933 max=0.007236 Jy/beam ! Clean residual mean=0.000006 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 0.366744 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.366744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099005Jy sigma=0.000701 ! Fit after self-cal, rms=0.099136Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302139 Jy ! Component: 100 - total flux cleaned = -0.000567725 Jy ! Component: 150 - total flux cleaned = -0.000806822 Jy ! Component: 200 - total flux cleaned = -0.000881682 Jy ! Total flux subtracted in 200 components = -0.000881682 Jy ! Clean residual min=-0.007732 max=0.007313 Jy/beam ! Clean residual mean=0.000006 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.365863 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.365863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099008Jy sigma=0.000700 ! Fit after self-cal, rms=0.099003Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099003Jy sigma=0.000700 ! Fit after self-cal, rms=0.095680Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=7.627 mas, bpa=5.253 degrees ! Estimated noise=967.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000628075 Jy ! Component: 100 - total flux cleaned = -0.000755178 Jy ! Component: 150 - total flux cleaned = -0.000755582 Jy ! Component: 200 - total flux cleaned = -0.00072394 Jy ! Total flux subtracted in 200 components = -0.00072394 Jy ! Clean residual min=-0.002775 max=0.002893 Jy/beam ! Clean residual mean=0.000002 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.365139 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.365139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095640Jy sigma=0.000661 ! Fit after self-cal, rms=0.095665Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253061 Jy ! Component: 100 - total flux cleaned = 0.0026016 Jy ! Component: 150 - total flux cleaned = 0.002654 Jy ! Component: 200 - total flux cleaned = 0.00251919 Jy ! Total flux subtracted in 200 components = 0.00251919 Jy ! Clean residual min=-0.002389 max=0.002261 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.367658 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.367658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095571Jy sigma=0.000660 ! Fit after self-cal, rms=0.095566Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095566Jy sigma=0.000660 ! Fit after self-cal, rms=0.095644Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.593 mas, bmaj=11.32 mas, bpa=-5.096 degrees ! Estimated noise=1239.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014836 Jy ! Component: 100 - total flux cleaned = 0.00131675 Jy ! Component: 150 - total flux cleaned = 0.00133979 Jy ! Component: 200 - total flux cleaned = 0.00138478 Jy ! Total flux subtracted in 200 components = 0.00138478 Jy ! Clean residual min=-0.003009 max=0.002428 Jy/beam ! Clean residual mean=0.000000 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.369042 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.369042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095632Jy sigma=0.000660 ! Fit after self-cal, rms=0.095631Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137038 Jy ! Component: 100 - total flux cleaned = 0.000115323 Jy ! Component: 150 - total flux cleaned = 0.000163658 Jy ! Component: 200 - total flux cleaned = 0.000207161 Jy ! Total flux subtracted in 200 components = 0.000207161 Jy ! Clean residual min=-0.003114 max=0.002361 Jy/beam ! Clean residual mean=-0.000000 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.36925 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.36925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095630Jy sigma=0.000660 ! Fit after self-cal, rms=0.095629Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.626 mas, bpa=5.271 degrees ! Estimated noise=966.378 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.626 at 5.271 degrees (North through East) ! Clean map min=-0.0024419 max=0.32815 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=6.719 mas, bpa=5.075 degrees ! Estimated noise=1213.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24982 Jy ! Component: 100 - total flux cleaned = 0.309337 Jy ! Component: 150 - total flux cleaned = 0.335308 Jy ! Component: 200 - total flux cleaned = 0.349019 Jy ! Total flux subtracted in 200 components = 0.349019 Jy ! Clean residual min=-0.004656 max=0.006546 Jy/beam ! Clean residual mean=0.000003 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.349019 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.349019 Jy ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.626 mas, bpa=5.271 degrees ! Estimated noise=966.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870013 Jy ! Component: 100 - total flux cleaned = 0.0135152 Jy ! Component: 150 - total flux cleaned = 0.0164697 Jy ! Component: 200 - total flux cleaned = 0.0182346 Jy ! Total flux subtracted in 200 components = 0.0182346 Jy ! Clean residual min=-0.002823 max=0.002237 Jy/beam ! Clean residual mean=0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.367253 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.367253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.593 mas, bmaj=11.32 mas, bpa=-5.096 degrees ! Estimated noise=1239.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151723 Jy ! Component: 100 - total flux cleaned = 0.0018755 Jy ! Component: 150 - total flux cleaned = 0.00218773 Jy ! Component: 200 - total flux cleaned = 0.00227572 Jy ! Total flux subtracted in 200 components = 0.00227572 Jy ! Clean residual min=-0.003147 max=0.002348 Jy/beam ! Clean residual mean=-0.000000 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.369529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51846e-05 Jy ! Component: 100 - total flux cleaned = 6.58171e-05 Jy ! Component: 150 - total flux cleaned = 9.97241e-05 Jy ! Component: 200 - total flux cleaned = 9.97626e-05 Jy ! Total flux subtracted in 200 components = 9.97626e-05 Jy ! Clean residual min=-0.003136 max=0.002337 Jy/beam ! Clean residual mean=-0.000001 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.369629 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 59 components and 0.369629 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.626 mas, bpa=5.271 degrees ! Estimated noise=966.378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67697e-05 Jy ! Component: 100 - total flux cleaned = -0.000163179 Jy ! Component: 150 - total flux cleaned = -0.000394044 Jy ! Component: 200 - total flux cleaned = -0.000494655 Jy ! Total flux subtracted in 200 components = -0.000494655 Jy ! Clean residual min=-0.002699 max=0.002120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.369134 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.369134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095610Jy sigma=0.000660 ! Fit after self-cal, rms=0.095602Jy sigma=0.000660 wmodel J1453+1025_S_2017_07_16_pus_map.mod ! Writing 78 model components to file: J1453+1025_S_2017_07_16_pus_map.mod wobs J1453+1025_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1453+1025_S_2017_07_16_pus_uvs.fits wwins J1453+1025_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1453+1025_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966984 Jy ! Component: 100 - total flux cleaned = -0.00104362 Jy ! Component: 150 - total flux cleaned = -0.00118738 Jy ! Component: 200 - total flux cleaned = -0.0014641 Jy ! Component: 250 - total flux cleaned = -0.0015314 Jy ! Component: 300 - total flux cleaned = -0.00169402 Jy ! Component: 350 - total flux cleaned = -0.00175678 Jy ! Component: 400 - total flux cleaned = -0.00188005 Jy ! Component: 450 - total flux cleaned = -0.00190993 Jy ! Component: 500 - total flux cleaned = -0.00196961 Jy ! Component: 550 - total flux cleaned = -0.0019987 Jy ! Component: 600 - total flux cleaned = -0.00202773 Jy ! Component: 650 - total flux cleaned = -0.00208378 Jy ! Component: 700 - total flux cleaned = -0.00213889 Jy ! Component: 750 - total flux cleaned = -0.00216599 Jy ! Component: 800 - total flux cleaned = -0.00224528 Jy ! Component: 850 - total flux cleaned = -0.00219364 Jy ! Component: 900 - total flux cleaned = -0.00229617 Jy ! Component: 950 - total flux cleaned = -0.00227154 Jy ! Component: 1000 - total flux cleaned = -0.00239548 Jy ! Component: 1050 - total flux cleaned = -0.00234647 Jy ! Component: 1100 - total flux cleaned = -0.00244253 Jy ! Component: 1150 - total flux cleaned = -0.0024185 Jy ! Component: 1200 - total flux cleaned = -0.00251231 Jy ! Component: 1250 - total flux cleaned = -0.00246623 Jy ! Component: 1300 - total flux cleaned = -0.00251226 Jy ! Component: 1350 - total flux cleaned = -0.00255707 Jy ! Component: 1400 - total flux cleaned = -0.00269029 Jy ! Component: 1450 - total flux cleaned = -0.00266821 Jy ! Component: 1500 - total flux cleaned = -0.00273321 Jy ! Component: 1550 - total flux cleaned = -0.00273305 Jy ! Component: 1600 - total flux cleaned = -0.00279635 Jy ! Component: 1650 - total flux cleaned = -0.00281694 Jy ! Component: 1700 - total flux cleaned = -0.00281658 Jy ! Component: 1750 - total flux cleaned = -0.00285739 Jy ! Component: 1800 - total flux cleaned = -0.00291769 Jy ! Component: 1850 - total flux cleaned = -0.00287756 Jy ! Component: 1900 - total flux cleaned = -0.00281854 Jy ! Component: 1950 - total flux cleaned = -0.00287766 Jy ! Component: 2000 - total flux cleaned = -0.00293591 Jy ! Component: 2050 - total flux cleaned = -0.00291696 Jy ! Component: 2100 - total flux cleaned = -0.00289773 Jy ! Component: 2150 - total flux cleaned = -0.00295395 Jy ! Component: 2200 - total flux cleaned = -0.00291678 Jy ! Component: 2250 - total flux cleaned = -0.00291673 Jy ! Component: 2300 - total flux cleaned = -0.00298953 Jy ! Component: 2350 - total flux cleaned = -0.0029714 Jy ! Component: 2400 - total flux cleaned = -0.00300712 Jy ! Component: 2450 - total flux cleaned = -0.00306017 Jy ! Component: 2500 - total flux cleaned = -0.00302495 Jy ! Component: 2550 - total flux cleaned = -0.00309453 Jy ! Component: 2600 - total flux cleaned = -0.00311176 Jy ! Component: 2650 - total flux cleaned = -0.00311186 Jy ! Component: 2700 - total flux cleaned = -0.00307795 Jy ! Component: 2750 - total flux cleaned = -0.00309461 Jy ! Component: 2800 - total flux cleaned = -0.00301153 Jy ! Component: 2850 - total flux cleaned = -0.00306101 Jy ! Component: 2900 - total flux cleaned = -0.00307745 Jy ! Component: 2950 - total flux cleaned = -0.00310989 Jy ! Component: 3000 - total flux cleaned = -0.00310978 Jy ! Component: 3050 - total flux cleaned = -0.00310983 Jy ! Component: 3100 - total flux cleaned = -0.0032047 Jy ! Component: 3150 - total flux cleaned = -0.0031731 Jy ! Component: 3200 - total flux cleaned = -0.0031886 Jy ! Component: 3250 - total flux cleaned = -0.00323517 Jy ! Component: 3300 - total flux cleaned = -0.00318923 Jy ! Component: 3350 - total flux cleaned = -0.00329571 Jy ! Component: 3400 - total flux cleaned = -0.00325044 Jy ! Component: 3450 - total flux cleaned = -0.00332545 Jy ! Component: 3500 - total flux cleaned = -0.00334021 Jy ! Component: 3550 - total flux cleaned = -0.00328124 Jy ! Component: 3600 - total flux cleaned = -0.00339871 Jy ! Component: 3650 - total flux cleaned = -0.00339867 Jy ! Component: 3700 - total flux cleaned = -0.00341321 Jy ! Component: 3750 - total flux cleaned = -0.00347072 Jy ! Component: 3800 - total flux cleaned = -0.00344217 Jy ! Component: 3850 - total flux cleaned = -0.00352712 Jy ! Component: 3900 - total flux cleaned = -0.00355537 Jy ! Component: 3950 - total flux cleaned = -0.00356918 Jy ! Component: 4000 - total flux cleaned = -0.00359717 Jy ! Component: 4050 - total flux cleaned = -0.00363865 Jy ! Total flux subtracted in 4096 components = -0.00362496 Jy ! Clean residual min=-0.000878 max=0.001025 Jy/beam ! Clean residual mean=-0.000002 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.365509 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 356 components and 0.365509 Jy ![Exited script file: muppet] wmap "J1453+1025_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.626 at 5.271 degrees (North through East) ! Clean map min=-0.0018882 max=0.32892 Jy/beam ! Writing clean map to FITS file: J1453+1025_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.328918 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.228197 0.228197 0.456394 0.912789 1.82558 3.65115 7.30231 14.6046 29.2092 58.4185 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.328 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.626 at 5.271 degrees (North through East) ! Clean map min=-0.0018882 max=0.32892 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1453+1025_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:00 2019