! Started logfile: J1453+0915_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:27 2019 obs J1453+0915_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1453+0915_S_2017_01_21_pus_uva.fits ! AN table 1: 113 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.677237 visibilities/baseline/integration-bin. ! Found source: J1453+0915 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453+0915_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962443Jy sigma=0.007385 ! Fit after self-cal, rms=0.933293Jy sigma=0.007227 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=6.084 mas, bpa=-3.075 degrees ! Estimated noise=1301.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550581 Jy ! Component: 100 - total flux cleaned = 0.0672982 Jy ! Total flux subtracted in 100 components = 0.0672982 Jy ! Clean residual min=-0.004529 max=0.004546 Jy/beam ! Clean residual mean=-0.000018 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.0672982 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0672982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096036Jy sigma=0.000652 ! Fit after self-cal, rms=0.095801Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=6.616 mas, bpa=-2.543 degrees ! Estimated noise=967.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563207 Jy ! Component: 100 - total flux cleaned = 0.00816568 Jy ! Component: 150 - total flux cleaned = 0.008828 Jy ! Component: 200 - total flux cleaned = 0.00904163 Jy ! Total flux subtracted in 200 components = 0.00904163 Jy ! Clean residual min=-0.003551 max=0.004040 Jy/beam ! Clean residual mean=-0.000012 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.0763399 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.0763399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095497Jy sigma=0.000648 ! Fit after self-cal, rms=0.095462Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 LA 0.98 ! MK 1.03 NL 1.08 OV 1.03 PT 0.97 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.04 LA 0.93 ! MK 1.00 NL 1.03 OV 1.07 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 0.99 LA 0.95 ! MK 1.07 NL 1.19 OV 0.96 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00 LA 0.91 ! MK 0.90 NL 1.00* OV 0.99 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.095462Jy sigma=0.000648 ! Fit after self-cal, rms=0.097095Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=6.645 mas, bpa=-2.42 degrees ! Estimated noise=972.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541345 Jy ! Component: 100 - total flux cleaned = 0.000381703 Jy ! Component: 150 - total flux cleaned = 0.000327444 Jy ! Component: 200 - total flux cleaned = 0.000328496 Jy ! Total flux subtracted in 200 components = 0.000328496 Jy ! Clean residual min=-0.003247 max=0.003464 Jy/beam ! Clean residual mean=-0.000011 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0766684 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.0766683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097068Jy sigma=0.000646 ! Fit after self-cal, rms=0.097209Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097209Jy sigma=0.000646 ! Fit after self-cal, rms=0.100329Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=6.641 mas, bpa=-2.274 degrees ! Estimated noise=972.918 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202984 Jy ! Component: 100 - total flux cleaned = 0.000173569 Jy ! Component: 150 - total flux cleaned = 0.000149271 Jy ! Component: 200 - total flux cleaned = 0.000148871 Jy ! Total flux subtracted in 200 components = 0.000148871 Jy ! Clean residual min=-0.002917 max=0.003239 Jy/beam ! Clean residual mean=-0.000002 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0768172 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0768172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100313Jy sigma=0.000643 ! Fit after self-cal, rms=0.100457Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232426 Jy ! Component: 100 - total flux cleaned = 0.00305471 Jy ! Component: 150 - total flux cleaned = 0.00332538 Jy ! Component: 200 - total flux cleaned = 0.00348435 Jy ! Total flux subtracted in 200 components = 0.00348435 Jy ! Clean residual min=-0.002884 max=0.002876 Jy/beam ! Clean residual mean=-0.000002 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0803016 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.0803016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100363Jy sigma=0.000642 ! Fit after self-cal, rms=0.100313Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100313Jy sigma=0.000642 ! Fit after self-cal, rms=0.100729Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=6.626 mas, bpa=-2.341 degrees ! Estimated noise=965.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119423 Jy ! Component: 100 - total flux cleaned = 0.00145418 Jy ! Component: 150 - total flux cleaned = 0.00156431 Jy ! Component: 200 - total flux cleaned = 0.00166016 Jy ! Total flux subtracted in 200 components = 0.00166016 Jy ! Clean residual min=-0.002775 max=0.002715 Jy/beam ! Clean residual mean=0.000001 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0819617 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.0819618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100686Jy sigma=0.000641 ! Fit after self-cal, rms=0.100676Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289076 Jy ! Component: 100 - total flux cleaned = 0.000396204 Jy ! Component: 150 - total flux cleaned = 0.000458433 Jy ! Component: 200 - total flux cleaned = 0.000514482 Jy ! Total flux subtracted in 200 components = 0.000514482 Jy ! Clean residual min=-0.002794 max=0.002666 Jy/beam ! Clean residual mean=0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0824762 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.0824762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100648Jy sigma=0.000641 ! Fit after self-cal, rms=0.100625Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100625Jy sigma=0.000641 ! Fit after self-cal, rms=0.100264Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.506 mas, bmaj=10.14 mas, bpa=0.9314 degrees ! Estimated noise=1295.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481013 Jy ! Component: 100 - total flux cleaned = 0.00063829 Jy ! Component: 150 - total flux cleaned = 0.000735977 Jy ! Component: 200 - total flux cleaned = 0.000819127 Jy ! Total flux subtracted in 200 components = 0.000819127 Jy ! Clean residual min=-0.003825 max=0.003844 Jy/beam ! Clean residual mean=0.000004 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0832953 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.0832953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100248Jy sigma=0.000641 ! Fit after self-cal, rms=0.100227Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.23451e-05 Jy ! Component: 100 - total flux cleaned = 3.37712e-05 Jy ! Component: 150 - total flux cleaned = 0.000113763 Jy ! Component: 200 - total flux cleaned = 0.00015875 Jy ! Total flux subtracted in 200 components = 0.00015875 Jy ! Clean residual min=-0.003786 max=0.003863 Jy/beam ! Clean residual mean=0.000003 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.0834541 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.0834541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100216Jy sigma=0.000641 ! Fit after self-cal, rms=0.100196Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.618 mas, bpa=-2.403 degrees ! Estimated noise=960.867 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.618 at -2.403 degrees (North through East) ! Clean map min=-0.0027711 max=0.071014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=6.113 mas, bpa=-2.784 degrees ! Estimated noise=1289.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539802 Jy ! Component: 100 - total flux cleaned = 0.0671518 Jy ! Component: 150 - total flux cleaned = 0.0736107 Jy ! Component: 200 - total flux cleaned = 0.0752423 Jy ! Total flux subtracted in 200 components = 0.0752423 Jy ! Clean residual min=-0.004170 max=0.003735 Jy/beam ! Clean residual mean=-0.000010 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0752423 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0752423 Jy ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.618 mas, bpa=-2.403 degrees ! Estimated noise=960.867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433196 Jy ! Component: 100 - total flux cleaned = 0.0062012 Jy ! Component: 150 - total flux cleaned = 0.00737551 Jy ! Component: 200 - total flux cleaned = 0.0080223 Jy ! Total flux subtracted in 200 components = 0.0080223 Jy ! Clean residual min=-0.002966 max=0.002687 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0832646 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.0832646 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.506 mas, bmaj=10.14 mas, bpa=0.9314 degrees ! Estimated noise=1295.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186383 Jy ! Component: 100 - total flux cleaned = 0.00229814 Jy ! Component: 150 - total flux cleaned = 0.0023961 Jy ! Component: 200 - total flux cleaned = 0.00247594 Jy ! Total flux subtracted in 200 components = 0.00247594 Jy ! Clean residual min=-0.003380 max=0.003260 Jy/beam ! Clean residual mean=0.000004 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0857405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.55719e-05 Jy ! Component: 100 - total flux cleaned = 9.78328e-05 Jy ! Component: 150 - total flux cleaned = 0.000153362 Jy ! Component: 200 - total flux cleaned = 0.000225878 Jy ! Total flux subtracted in 200 components = 0.000225878 Jy ! Clean residual min=-0.003208 max=0.003283 Jy/beam ! Clean residual mean=0.000004 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.0859664 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 82 components and 0.0859664 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.618 mas, bpa=-2.403 degrees ! Estimated noise=960.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612346 Jy ! Component: 100 - total flux cleaned = 0.000557321 Jy ! Component: 150 - total flux cleaned = 0.000554502 Jy ! Component: 200 - total flux cleaned = 0.000554847 Jy ! Total flux subtracted in 200 components = 0.000554847 Jy ! Clean residual min=-0.002691 max=0.002428 Jy/beam ! Clean residual mean=0.000002 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0865213 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.0865212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100182Jy sigma=0.000640 ! Fit after self-cal, rms=0.100195Jy sigma=0.000640 wmodel J1453+0915_S_2017_01_21_pus_map.mod ! Writing 92 model components to file: J1453+0915_S_2017_01_21_pus_map.mod wobs J1453+0915_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1453+0915_S_2017_01_21_pus_uvs.fits wwins J1453+0915_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1453+0915_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459807 Jy ! Component: 100 - total flux cleaned = -0.000241784 Jy ! Component: 150 - total flux cleaned = -0.000120786 Jy ! Component: 200 - total flux cleaned = -8.20194e-05 Jy ! Component: 250 - total flux cleaned = 0.000181522 Jy ! Component: 300 - total flux cleaned = 0.000254564 Jy ! Component: 350 - total flux cleaned = 0.000571316 Jy ! Component: 400 - total flux cleaned = 0.000673112 Jy ! Component: 450 - total flux cleaned = 0.000706733 Jy ! Component: 500 - total flux cleaned = 0.000738328 Jy ! Component: 550 - total flux cleaned = 0.000673905 Jy ! Component: 600 - total flux cleaned = 0.000643104 Jy ! Component: 650 - total flux cleaned = 0.000643112 Jy ! Component: 700 - total flux cleaned = 0.000583271 Jy ! Component: 750 - total flux cleaned = 0.000554344 Jy ! Component: 800 - total flux cleaned = 0.000612349 Jy ! Component: 850 - total flux cleaned = 0.000556011 Jy ! Component: 900 - total flux cleaned = 0.000638901 Jy ! Component: 950 - total flux cleaned = 0.000556689 Jy ! Component: 1000 - total flux cleaned = 0.000690689 Jy ! Component: 1050 - total flux cleaned = 0.000742922 Jy ! Component: 1100 - total flux cleaned = 0.000717017 Jy ! Component: 1150 - total flux cleaned = 0.000844409 Jy ! Component: 1200 - total flux cleaned = 0.000869565 Jy ! Component: 1250 - total flux cleaned = 0.000894226 Jy ! Component: 1300 - total flux cleaned = 0.000894449 Jy ! Component: 1350 - total flux cleaned = 0.000990925 Jy ! Component: 1400 - total flux cleaned = 0.00106292 Jy ! Component: 1450 - total flux cleaned = 0.00118027 Jy ! Component: 1500 - total flux cleaned = 0.00124968 Jy ! Component: 1550 - total flux cleaned = 0.00138667 Jy ! Component: 1600 - total flux cleaned = 0.00140896 Jy ! Component: 1650 - total flux cleaned = 0.00160966 Jy ! Component: 1700 - total flux cleaned = 0.00176406 Jy ! Component: 1750 - total flux cleaned = 0.00185131 Jy ! Component: 1800 - total flux cleaned = 0.00195891 Jy ! Component: 1850 - total flux cleaned = 0.00204418 Jy ! Component: 1900 - total flux cleaned = 0.00210761 Jy ! Component: 1950 - total flux cleaned = 0.00229537 Jy ! Component: 2000 - total flux cleaned = 0.0023364 Jy ! Component: 2050 - total flux cleaned = 0.0023773 Jy ! Component: 2100 - total flux cleaned = 0.00239798 Jy ! Component: 2150 - total flux cleaned = 0.00251851 Jy ! Component: 2200 - total flux cleaned = 0.00257797 Jy ! Component: 2250 - total flux cleaned = 0.00261734 Jy ! Component: 2300 - total flux cleaned = 0.00271468 Jy ! Component: 2350 - total flux cleaned = 0.00283026 Jy ! Component: 2400 - total flux cleaned = 0.00286837 Jy ! Component: 2450 - total flux cleaned = 0.0028683 Jy ! Component: 2500 - total flux cleaned = 0.00294324 Jy ! Component: 2550 - total flux cleaned = 0.00303616 Jy ! Component: 2600 - total flux cleaned = 0.00301761 Jy ! Component: 2650 - total flux cleaned = 0.00312707 Jy ! Component: 2700 - total flux cleaned = 0.00318134 Jy ! Component: 2750 - total flux cleaned = 0.00318133 Jy ! Component: 2800 - total flux cleaned = 0.00321699 Jy ! Component: 2850 - total flux cleaned = 0.00326989 Jy ! Component: 2900 - total flux cleaned = 0.00328754 Jy ! Component: 2950 - total flux cleaned = 0.00330475 Jy ! Component: 3000 - total flux cleaned = 0.00328777 Jy ! Component: 3050 - total flux cleaned = 0.00332197 Jy ! Component: 3100 - total flux cleaned = 0.00335576 Jy ! Component: 3150 - total flux cleaned = 0.00333906 Jy ! Component: 3200 - total flux cleaned = 0.00337239 Jy ! Component: 3250 - total flux cleaned = 0.00337247 Jy ! Component: 3300 - total flux cleaned = 0.00347074 Jy ! Component: 3350 - total flux cleaned = 0.00347069 Jy ! Component: 3400 - total flux cleaned = 0.0034708 Jy ! Component: 3450 - total flux cleaned = 0.00358282 Jy ! Component: 3500 - total flux cleaned = 0.00356699 Jy ! Component: 3550 - total flux cleaned = 0.00361435 Jy ! Component: 3600 - total flux cleaned = 0.00363007 Jy ! Component: 3650 - total flux cleaned = 0.00366122 Jy ! Component: 3700 - total flux cleaned = 0.00364578 Jy ! Component: 3750 - total flux cleaned = 0.00366097 Jy ! Component: 3800 - total flux cleaned = 0.00364574 Jy ! Component: 3850 - total flux cleaned = 0.00366083 Jy ! Component: 3900 - total flux cleaned = 0.00364568 Jy ! Component: 3950 - total flux cleaned = 0.00367544 Jy ! Component: 4000 - total flux cleaned = 0.00364587 Jy ! Component: 4050 - total flux cleaned = 0.00363098 Jy ! Total flux subtracted in 4096 components = 0.003675 Jy ! Clean residual min=-0.000845 max=0.000826 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0901962 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 407 components and 0.0901962 Jy ![Exited script file: muppet] wmap "J1453+0915_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.618 at -2.403 degrees (North through East) ! Clean map min=-0.0024975 max=0.07048 Jy/beam ! Writing clean map to FITS file: J1453+0915_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0704798 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000264035 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12387 1.12387 2.24775 4.49549 8.99098 17.982 35.9639 71.9279 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.618 at -2.403 degrees (North through East) ! Clean map min=-0.0024975 max=0.07048 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1453+0915_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:32 2019