! Started logfile: J1452+4522_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:15:22 2019 obs J1452+4522_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1452+4522_S_2017_01_16_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774631 visibilities/baseline/integration-bin. ! Found source: J1452+4522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1452+4522_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 393 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945140Jy sigma=0.008535 ! Fit after self-cal, rms=0.930808Jy sigma=0.008448 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.061 mas, bmaj=6.056 mas, bpa=18.42 degrees ! Estimated noise=1017.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566279 Jy ! Component: 100 - total flux cleaned = 0.0697659 Jy ! Total flux subtracted in 100 components = 0.0697659 Jy ! Clean residual min=-0.004242 max=0.005523 Jy/beam ! Clean residual mean=0.000001 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.0697659 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0697659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092588Jy sigma=0.000675 ! Fit after self-cal, rms=0.092553Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.816 mas, bmaj=6.726 mas, bpa=16.67 degrees ! Estimated noise=674.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488492 Jy ! Component: 100 - total flux cleaned = 0.00733927 Jy ! Component: 150 - total flux cleaned = 0.00838344 Jy ! Component: 200 - total flux cleaned = 0.00858772 Jy ! Total flux subtracted in 200 components = 0.00858772 Jy ! Clean residual min=-0.003482 max=0.003796 Jy/beam ! Clean residual mean=-0.000004 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.0783536 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0783536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092345Jy sigma=0.000672 ! Fit after self-cal, rms=0.092352Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 1.06 KP 0.99 ! LA 0.99 MK 1.00* NL 0.91 OV 1.04 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.99 HN 0.97 KP 0.95 ! LA 0.96 MK 1.00* NL 1.07 OV 1.05 ! PT 0.97 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.96 KP 1.00 ! LA 0.98 MK 1.00* NL 1.03 OV 0.90 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.92 KP 1.00* ! LA 1.05 MK 1.00* NL 1.00* OV 0.95 ! PT 0.94 SC 0.59 ! ! ! Fit before self-cal, rms=0.092352Jy sigma=0.000671 ! Fit after self-cal, rms=0.083876Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.821 mas, bmaj=6.738 mas, bpa=15.98 degrees ! Estimated noise=672.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-93.5, -94). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257726 Jy ! Component: 100 - total flux cleaned = 0.0023692 Jy ! Component: 150 - total flux cleaned = 0.00197606 Jy ! Component: 200 - total flux cleaned = 0.00159191 Jy ! Total flux subtracted in 200 components = 0.00159191 Jy ! Clean residual min=-0.002794 max=0.003114 Jy/beam ! Clean residual mean=-0.000008 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.0799456 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.0799456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083700Jy sigma=0.000668 ! Fit after self-cal, rms=0.083690Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083690Jy sigma=0.000667 ! Fit after self-cal, rms=0.086856Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.76 mas, bmaj=6.769 mas, bpa=14.35 degrees ! Estimated noise=676.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161311 Jy ! Component: 100 - total flux cleaned = -7.8048e-05 Jy ! Component: 150 - total flux cleaned = -0.000338586 Jy ! Component: 200 - total flux cleaned = -0.000533455 Jy ! Total flux subtracted in 200 components = -0.000533455 Jy ! Clean residual min=-0.001783 max=0.001578 Jy/beam ! Clean residual mean=-0.000005 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0794121 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0794121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086822Jy sigma=0.000659 ! Fit after self-cal, rms=0.087002Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.99606e-05 Jy ! Component: 100 - total flux cleaned = -7.62314e-05 Jy ! Component: 150 - total flux cleaned = -0.000120983 Jy ! Component: 200 - total flux cleaned = -0.000141841 Jy ! Total flux subtracted in 200 components = -0.000141841 Jy ! Clean residual min=-0.001682 max=0.001584 Jy/beam ! Clean residual mean=-0.000005 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0792703 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.0792703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086990Jy sigma=0.000659 ! Fit after self-cal, rms=0.086993Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086993Jy sigma=0.000659 ! Fit after self-cal, rms=0.088830Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.739 mas, bmaj=6.772 mas, bpa=14.42 degrees ! Estimated noise=677.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.06336e-05 Jy ! Component: 100 - total flux cleaned = -0.000127937 Jy ! Component: 150 - total flux cleaned = -0.000232364 Jy ! Component: 200 - total flux cleaned = -0.0002509 Jy ! Total flux subtracted in 200 components = -0.0002509 Jy ! Clean residual min=-0.001666 max=0.001548 Jy/beam ! Clean residual mean=-0.000005 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0790194 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.0790194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088818Jy sigma=0.000658 ! Fit after self-cal, rms=0.088854Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.95514e-05 Jy ! Component: 100 - total flux cleaned = -4.74314e-05 Jy ! Component: 150 - total flux cleaned = -6.44068e-05 Jy ! Component: 200 - total flux cleaned = -6.40066e-05 Jy ! Total flux subtracted in 200 components = -6.40066e-05 Jy ! Clean residual min=-0.001636 max=0.001536 Jy/beam ! Clean residual mean=-0.000005 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0789554 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.0789554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088848Jy sigma=0.000658 ! Fit after self-cal, rms=0.088850Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088850Jy sigma=0.000658 ! Fit after self-cal, rms=0.089507Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.418 mas, bmaj=9.535 mas, bpa=-6.227 degrees ! Estimated noise=773.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101015 Jy ! Component: 100 - total flux cleaned = 8.4067e-05 Jy ! Component: 150 - total flux cleaned = 9.89971e-05 Jy ! Component: 200 - total flux cleaned = 0.000125477 Jy ! Total flux subtracted in 200 components = 0.000125477 Jy ! Clean residual min=-0.001748 max=0.001435 Jy/beam ! Clean residual mean=-0.000011 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0790808 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.0790808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089505Jy sigma=0.000658 ! Fit after self-cal, rms=0.089519Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.82189e-05 Jy ! Component: 100 - total flux cleaned = -5.55246e-06 Jy ! Component: 150 - total flux cleaned = 5.55897e-06 Jy ! Component: 200 - total flux cleaned = 1.56348e-05 Jy ! Total flux subtracted in 200 components = 1.56348e-05 Jy ! Clean residual min=-0.001755 max=0.001454 Jy/beam ! Clean residual mean=-0.000010 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0790965 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.0790965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089519Jy sigma=0.000658 ! Fit after self-cal, rms=0.089522Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.726 mas, bmaj=6.776 mas, bpa=14.47 degrees ! Estimated noise=677.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.726 x 6.776 at 14.47 degrees (North through East) ! Clean map min=-0.0018116 max=0.071462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.984 mas, bmaj=6.092 mas, bpa=16 degrees ! Estimated noise=1007.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559064 Jy ! Component: 100 - total flux cleaned = 0.0690435 Jy ! Component: 150 - total flux cleaned = 0.0738969 Jy ! Component: 200 - total flux cleaned = 0.0758388 Jy ! Total flux subtracted in 200 components = 0.0758388 Jy ! Clean residual min=-0.002512 max=0.002963 Jy/beam ! Clean residual mean=-0.000002 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0758388 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0758388 Jy ! Inverting map and beam ! Estimated beam: bmin=4.726 mas, bmaj=6.776 mas, bpa=14.47 degrees ! Estimated noise=677.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235666 Jy ! Component: 100 - total flux cleaned = 0.00291305 Jy ! Component: 150 - total flux cleaned = 0.00306443 Jy ! Component: 200 - total flux cleaned = 0.0031056 Jy ! Total flux subtracted in 200 components = 0.0031056 Jy ! Clean residual min=-0.001617 max=0.001614 Jy/beam ! Clean residual mean=-0.000006 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0789444 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 59 components and 0.0789444 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.418 mas, bmaj=9.535 mas, bpa=-6.227 degrees ! Estimated noise=773.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342874 Jy ! Component: 100 - total flux cleaned = 0.000437457 Jy ! Component: 150 - total flux cleaned = 0.000435755 Jy ! Component: 200 - total flux cleaned = 0.000458055 Jy ! Total flux subtracted in 200 components = 0.000458055 Jy ! Clean residual min=-0.001716 max=0.001517 Jy/beam ! Clean residual mean=-0.000011 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0794024 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18149e-07 Jy ! Component: 100 - total flux cleaned = 1.77772e-05 Jy ! Component: 150 - total flux cleaned = 1.81735e-05 Jy ! Component: 200 - total flux cleaned = 1.85935e-05 Jy ! Total flux subtracted in 200 components = 1.85935e-05 Jy ! Clean residual min=-0.001740 max=0.001527 Jy/beam ! Clean residual mean=-0.000011 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.079421 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 88 components and 0.0794211 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.726 mas, bmaj=6.776 mas, bpa=14.47 degrees ! Estimated noise=677.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257804 Jy ! Component: 100 - total flux cleaned = -0.000227801 Jy ! Component: 150 - total flux cleaned = -0.000199869 Jy ! Component: 200 - total flux cleaned = -0.000172936 Jy ! Total flux subtracted in 200 components = -0.000172936 Jy ! Clean residual min=-0.001617 max=0.001519 Jy/beam ! Clean residual mean=-0.000006 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0792481 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.0792481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089545Jy sigma=0.000658 ! Fit after self-cal, rms=0.089542Jy sigma=0.000658 wmodel J1452+4522_S_2017_01_16_pus_map.mod ! Writing 105 model components to file: J1452+4522_S_2017_01_16_pus_map.mod wobs J1452+4522_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1452+4522_S_2017_01_16_pus_uvs.fits wwins J1452+4522_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J1452+4522_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000498392 Jy ! Component: 100 - total flux cleaned = -0.000771086 Jy ! Component: 150 - total flux cleaned = -0.000979981 Jy ! Component: 200 - total flux cleaned = -0.00120628 Jy ! Component: 250 - total flux cleaned = -0.00132783 Jy ! Component: 300 - total flux cleaned = -0.00144687 Jy ! Component: 350 - total flux cleaned = -0.0016083 Jy ! Component: 400 - total flux cleaned = -0.00174249 Jy ! Component: 450 - total flux cleaned = -0.00185194 Jy ! Component: 500 - total flux cleaned = -0.00193789 Jy ! Component: 550 - total flux cleaned = -0.00206363 Jy ! Component: 600 - total flux cleaned = -0.00216598 Jy ! Component: 650 - total flux cleaned = -0.00220636 Jy ! Component: 700 - total flux cleaned = -0.00226575 Jy ! Component: 750 - total flux cleaned = -0.00234303 Jy ! Component: 800 - total flux cleaned = -0.00236171 Jy ! Component: 850 - total flux cleaned = -0.00241802 Jy ! Component: 900 - total flux cleaned = -0.00243656 Jy ! Component: 950 - total flux cleaned = -0.00245447 Jy ! Component: 1000 - total flux cleaned = -0.00250794 Jy ! Component: 1050 - total flux cleaned = -0.00249001 Jy ! Component: 1100 - total flux cleaned = -0.00248986 Jy ! Component: 1150 - total flux cleaned = -0.00247277 Jy ! Component: 1200 - total flux cleaned = -0.00243905 Jy ! Component: 1250 - total flux cleaned = -0.00243933 Jy ! Component: 1300 - total flux cleaned = -0.00245552 Jy ! Component: 1350 - total flux cleaned = -0.00237393 Jy ! Component: 1400 - total flux cleaned = -0.00240601 Jy ! Component: 1450 - total flux cleaned = -0.00237383 Jy ! Component: 1500 - total flux cleaned = -0.00232656 Jy ! Component: 1550 - total flux cleaned = -0.00232612 Jy ! Component: 1600 - total flux cleaned = -0.00220298 Jy ! Component: 1650 - total flux cleaned = -0.00215715 Jy ! Component: 1700 - total flux cleaned = -0.00208179 Jy ! Component: 1750 - total flux cleaned = -0.00202188 Jy ! Component: 1800 - total flux cleaned = -0.00196297 Jy ! Component: 1850 - total flux cleaned = -0.00191917 Jy ! Component: 1900 - total flux cleaned = -0.00180357 Jy ! Component: 1950 - total flux cleaned = -0.00184651 Jy ! Component: 2000 - total flux cleaned = -0.00180388 Jy ! Component: 2050 - total flux cleaned = -0.00176155 Jy ! Component: 2100 - total flux cleaned = -0.00176178 Jy ! Component: 2150 - total flux cleaned = -0.00174807 Jy ! Component: 2200 - total flux cleaned = -0.00174829 Jy ! Component: 2250 - total flux cleaned = -0.00177542 Jy ! Component: 2300 - total flux cleaned = -0.00178868 Jy ! Component: 2350 - total flux cleaned = -0.00178887 Jy ! Component: 2400 - total flux cleaned = -0.00181525 Jy ! Component: 2450 - total flux cleaned = -0.00186764 Jy ! Component: 2500 - total flux cleaned = -0.00185468 Jy ! Component: 2550 - total flux cleaned = -0.00186757 Jy ! Component: 2600 - total flux cleaned = -0.00185502 Jy ! Component: 2650 - total flux cleaned = -0.0019057 Jy ! Component: 2700 - total flux cleaned = -0.00189332 Jy ! Component: 2750 - total flux cleaned = -0.0019304 Jy ! Component: 2800 - total flux cleaned = -0.00193044 Jy ! Component: 2850 - total flux cleaned = -0.00195492 Jy ! Component: 2900 - total flux cleaned = -0.00189405 Jy ! Component: 2950 - total flux cleaned = -0.00185776 Jy ! Component: 3000 - total flux cleaned = -0.00184576 Jy ! Component: 3050 - total flux cleaned = -0.00182202 Jy ! Component: 3100 - total flux cleaned = -0.00183396 Jy ! Component: 3150 - total flux cleaned = -0.00182223 Jy ! Component: 3200 - total flux cleaned = -0.00177551 Jy ! Component: 3250 - total flux cleaned = -0.00177547 Jy ! Component: 3300 - total flux cleaned = -0.00178703 Jy ! Component: 3350 - total flux cleaned = -0.00176411 Jy ! Component: 3400 - total flux cleaned = -0.00179831 Jy ! Component: 3450 - total flux cleaned = -0.0017983 Jy ! Component: 3500 - total flux cleaned = -0.00177587 Jy ! Component: 3550 - total flux cleaned = -0.00173101 Jy ! Component: 3600 - total flux cleaned = -0.00175323 Jy ! Component: 3650 - total flux cleaned = -0.00176431 Jy ! Component: 3700 - total flux cleaned = -0.00174238 Jy ! Component: 3750 - total flux cleaned = -0.00167669 Jy ! Component: 3800 - total flux cleaned = -0.00168756 Jy ! Component: 3850 - total flux cleaned = -0.00169842 Jy ! Component: 3900 - total flux cleaned = -0.00168757 Jy ! Component: 3950 - total flux cleaned = -0.00169816 Jy ! Component: 4000 - total flux cleaned = -0.00167682 Jy ! Component: 4050 - total flux cleaned = -0.00164516 Jy ! Total flux subtracted in 4096 components = -0.00163471 Jy ! Clean residual min=-0.000620 max=0.000648 Jy/beam ! Clean residual mean=-0.000005 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0776134 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 391 components and 0.0776135 Jy ![Exited script file: muppet] wmap "J1452+4522_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.726 x 6.776 at 14.47 degrees (North through East) ! Clean map min=-0.0014688 max=0.071448 Jy/beam ! Writing clean map to FITS file: J1452+4522_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0714483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0001949 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.818353 0.818353 1.63671 3.27341 6.54682 13.0936 26.1873 52.3746 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.726 x 6.776 at 14.47 degrees (North through East) ! Clean map min=-0.0014688 max=0.071448 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1452+4522_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:15:27 2019