! Started logfile: J1450+0910_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:23 2019 obs J1450+0910_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1450+0910_S_2017_01_21_pus_uva.fits ! AN table 1: 83 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.685408 visibilities/baseline/integration-bin. ! Found source: J1450+0910 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1450+0910_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.857058Jy sigma=0.006484 ! Fit after self-cal, rms=0.843664Jy sigma=0.006401 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=6.149 mas, bpa=-3.983 degrees ! Estimated noise=1514.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128902 Jy ! Component: 100 - total flux cleaned = 0.157011 Jy ! Total flux subtracted in 100 components = 0.157011 Jy ! Clean residual min=-0.004927 max=0.007840 Jy/beam ! Clean residual mean=-0.000015 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.157011 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.157011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102962Jy sigma=0.000682 ! Fit after self-cal, rms=0.102957Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.643 mas, bpa=-2.836 degrees ! Estimated noise=1123.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703562 Jy ! Component: 100 - total flux cleaned = 0.010088 Jy ! Component: 150 - total flux cleaned = 0.0116523 Jy ! Component: 200 - total flux cleaned = 0.0117769 Jy ! Total flux subtracted in 200 components = 0.0117769 Jy ! Clean residual min=-0.004724 max=0.005626 Jy/beam ! Clean residual mean=-0.000007 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.168788 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.168788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102726Jy sigma=0.000677 ! Fit after self-cal, rms=0.102730Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.93 LA 1.00 ! MK 0.98 NL 1.04 OV 1.17 PT 0.95 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 LA 1.01 ! MK 0.96 NL 0.97 OV 1.21 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.98 LA 1.00 ! MK 1.02 NL 0.97 OV 1.04 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.98 LA 1.03 ! MK 1.13 NL 1.00* OV 1.12 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.102730Jy sigma=0.000677 ! Fit after self-cal, rms=0.107244Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=6.658 mas, bpa=-2.972 degrees ! Estimated noise=1118.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51592e-06 Jy ! Component: 100 - total flux cleaned = 9.82979e-05 Jy ! Component: 150 - total flux cleaned = 0.000158245 Jy ! Component: 200 - total flux cleaned = 0.0001855 Jy ! Total flux subtracted in 200 components = 0.0001855 Jy ! Clean residual min=-0.003333 max=0.004015 Jy/beam ! Clean residual mean=-0.000007 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.168974 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.168974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107216Jy sigma=0.000670 ! Fit after self-cal, rms=0.107473Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107473Jy sigma=0.000670 ! Fit after self-cal, rms=0.114328Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=6.66 mas, bpa=-3.036 degrees ! Estimated noise=1120.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746734 Jy ! Component: 100 - total flux cleaned = 0.000915918 Jy ! Component: 150 - total flux cleaned = 0.00101793 Jy ! Component: 200 - total flux cleaned = 0.00105506 Jy ! Total flux subtracted in 200 components = 0.00105506 Jy ! Clean residual min=-0.002859 max=0.003177 Jy/beam ! Clean residual mean=-0.000002 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.170029 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.170029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114314Jy sigma=0.000663 ! Fit after self-cal, rms=0.114513Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (75.5, 106). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184337 Jy ! Component: 100 - total flux cleaned = 0.00188824 Jy ! Component: 150 - total flux cleaned = 0.00180806 Jy ! Component: 200 - total flux cleaned = 0.00170858 Jy ! Total flux subtracted in 200 components = 0.00170858 Jy ! Clean residual min=-0.002644 max=0.002713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.171737 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.171737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114437Jy sigma=0.000663 ! Fit after self-cal, rms=0.114423Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114423Jy sigma=0.000663 ! Fit after self-cal, rms=0.115239Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=6.656 mas, bpa=-3.117 degrees ! Estimated noise=1121.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646795 Jy ! Component: 100 - total flux cleaned = 0.000782516 Jy ! Component: 150 - total flux cleaned = 0.000929413 Jy ! Component: 200 - total flux cleaned = 0.00100663 Jy ! Total flux subtracted in 200 components = 0.00100663 Jy ! Clean residual min=-0.002653 max=0.002741 Jy/beam ! Clean residual mean=-0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.172744 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.172744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115211Jy sigma=0.000662 ! Fit after self-cal, rms=0.115218Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232515 Jy ! Component: 100 - total flux cleaned = 0.000255086 Jy ! Component: 150 - total flux cleaned = 0.0002762 Jy ! Component: 200 - total flux cleaned = 0.00027595 Jy ! Total flux subtracted in 200 components = 0.00027595 Jy ! Clean residual min=-0.002623 max=0.002714 Jy/beam ! Clean residual mean=-0.000002 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.17302 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.17302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115205Jy sigma=0.000662 ! Fit after self-cal, rms=0.115204Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115204Jy sigma=0.000662 ! Fit after self-cal, rms=0.115346Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.422 mas, bmaj=10.2 mas, bpa=-0.164 degrees ! Estimated noise=1522.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127461 Jy ! Component: 100 - total flux cleaned = 0.0014734 Jy ! Component: 150 - total flux cleaned = 0.00160901 Jy ! Component: 200 - total flux cleaned = 0.00172326 Jy ! Total flux subtracted in 200 components = 0.00172326 Jy ! Clean residual min=-0.002868 max=0.002919 Jy/beam ! Clean residual mean=-0.000005 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.174743 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.174743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115346Jy sigma=0.000662 ! Fit after self-cal, rms=0.115333Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76325e-06 Jy ! Component: 100 - total flux cleaned = 8.20121e-05 Jy ! Component: 150 - total flux cleaned = 0.000121992 Jy ! Component: 200 - total flux cleaned = 0.000123174 Jy ! Total flux subtracted in 200 components = 0.000123174 Jy ! Clean residual min=-0.002828 max=0.002894 Jy/beam ! Clean residual mean=-0.000005 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.174866 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.174866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115340Jy sigma=0.000662 ! Fit after self-cal, rms=0.115334Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.653 mas, bpa=-3.157 degrees ! Estimated noise=1122.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.653 at -3.157 degrees (North through East) ! Clean map min=-0.002436 max=0.16494 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=6.159 mas, bpa=-4.246 degrees ! Estimated noise=1507.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128147 Jy ! Component: 100 - total flux cleaned = 0.156141 Jy ! Component: 150 - total flux cleaned = 0.163743 Jy ! Component: 200 - total flux cleaned = 0.168034 Jy ! Total flux subtracted in 200 components = 0.168034 Jy ! Clean residual min=-0.003969 max=0.003470 Jy/beam ! Clean residual mean=-0.000005 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.168034 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.168034 Jy ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.653 mas, bpa=-3.157 degrees ! Estimated noise=1122.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290806 Jy ! Component: 100 - total flux cleaned = 0.00364246 Jy ! Component: 150 - total flux cleaned = 0.00410686 Jy ! Component: 200 - total flux cleaned = 0.00454711 Jy ! Total flux subtracted in 200 components = 0.00454711 Jy ! Clean residual min=-0.002859 max=0.002767 Jy/beam ! Clean residual mean=-0.000001 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.172581 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.172581 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.422 mas, bmaj=10.2 mas, bpa=-0.164 degrees ! Estimated noise=1522.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210426 Jy ! Component: 100 - total flux cleaned = 0.00234934 Jy ! Component: 150 - total flux cleaned = 0.00235062 Jy ! Component: 200 - total flux cleaned = 0.00232323 Jy ! Total flux subtracted in 200 components = 0.00232323 Jy ! Clean residual min=-0.002815 max=0.002859 Jy/beam ! Clean residual mean=-0.000005 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.174904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.46632e-07 Jy ! Component: 100 - total flux cleaned = 2.54584e-07 Jy ! Component: 150 - total flux cleaned = 2.22603e-05 Jy ! Component: 200 - total flux cleaned = 2.22924e-05 Jy ! Total flux subtracted in 200 components = 2.22924e-05 Jy ! Clean residual min=-0.002811 max=0.002859 Jy/beam ! Clean residual mean=-0.000004 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.174927 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.174927 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.653 mas, bpa=-3.157 degrees ! Estimated noise=1122.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000960704 Jy ! Component: 100 - total flux cleaned = -0.00108672 Jy ! Component: 150 - total flux cleaned = -0.00115023 Jy ! Component: 200 - total flux cleaned = -0.00120611 Jy ! Total flux subtracted in 200 components = -0.00120611 Jy ! Clean residual min=-0.002636 max=0.002841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.173721 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.173721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115346Jy sigma=0.000662 ! Fit after self-cal, rms=0.115341Jy sigma=0.000662 wmodel J1450+0910_S_2017_01_21_pus_map.mod ! Writing 67 model components to file: J1450+0910_S_2017_01_21_pus_map.mod wobs J1450+0910_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1450+0910_S_2017_01_21_pus_uvs.fits wwins J1450+0910_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1450+0910_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128894 Jy ! Component: 100 - total flux cleaned = -0.000268954 Jy ! Component: 150 - total flux cleaned = -0.00044551 Jy ! Component: 200 - total flux cleaned = -0.000740415 Jy ! Component: 250 - total flux cleaned = -0.000943879 Jy ! Component: 300 - total flux cleaned = -0.0011801 Jy ! Component: 350 - total flux cleaned = -0.00137163 Jy ! Component: 400 - total flux cleaned = -0.00133464 Jy ! Component: 450 - total flux cleaned = -0.00137156 Jy ! Component: 500 - total flux cleaned = -0.00140715 Jy ! Component: 550 - total flux cleaned = -0.00144212 Jy ! Component: 600 - total flux cleaned = -0.00154456 Jy ! Component: 650 - total flux cleaned = -0.00171188 Jy ! Component: 700 - total flux cleaned = -0.00174467 Jy ! Component: 750 - total flux cleaned = -0.0019698 Jy ! Component: 800 - total flux cleaned = -0.00206457 Jy ! Component: 850 - total flux cleaned = -0.00215758 Jy ! Component: 900 - total flux cleaned = -0.00231086 Jy ! Component: 950 - total flux cleaned = -0.00234065 Jy ! Component: 1000 - total flux cleaned = -0.0023996 Jy ! Component: 1050 - total flux cleaned = -0.002545 Jy ! Component: 1100 - total flux cleaned = -0.00263064 Jy ! Component: 1150 - total flux cleaned = -0.00271499 Jy ! Component: 1200 - total flux cleaned = -0.00279798 Jy ! Component: 1250 - total flux cleaned = -0.0028251 Jy ! Component: 1300 - total flux cleaned = -0.00287873 Jy ! Component: 1350 - total flux cleaned = -0.00282555 Jy ! Component: 1400 - total flux cleaned = -0.00282576 Jy ! Component: 1450 - total flux cleaned = -0.00287799 Jy ! Component: 1500 - total flux cleaned = -0.00290429 Jy ! Component: 1550 - total flux cleaned = -0.00287918 Jy ! Component: 1600 - total flux cleaned = -0.00297978 Jy ! Component: 1650 - total flux cleaned = -0.00293035 Jy ! Component: 1700 - total flux cleaned = -0.0029549 Jy ! Component: 1750 - total flux cleaned = -0.00293105 Jy ! Component: 1800 - total flux cleaned = -0.00293141 Jy ! Component: 1850 - total flux cleaned = -0.00285995 Jy ! Component: 1900 - total flux cleaned = -0.00281249 Jy ! Component: 1950 - total flux cleaned = -0.00267286 Jy ! Component: 2000 - total flux cleaned = -0.0025809 Jy ! Component: 2050 - total flux cleaned = -0.00251281 Jy ! Component: 2100 - total flux cleaned = -0.00249002 Jy ! Component: 2150 - total flux cleaned = -0.00242331 Jy ! Component: 2200 - total flux cleaned = -0.00231242 Jy ! Component: 2250 - total flux cleaned = -0.0023125 Jy ! Component: 2300 - total flux cleaned = -0.00213876 Jy ! Component: 2350 - total flux cleaned = -0.00205246 Jy ! Component: 2400 - total flux cleaned = -0.00186044 Jy ! Component: 2450 - total flux cleaned = -0.00179721 Jy ! Component: 2500 - total flux cleaned = -0.00171345 Jy ! Component: 2550 - total flux cleaned = -0.00160956 Jy ! Component: 2600 - total flux cleaned = -0.00154777 Jy ! Component: 2650 - total flux cleaned = -0.00146615 Jy ! Component: 2700 - total flux cleaned = -0.00134462 Jy ! Component: 2750 - total flux cleaned = -0.00120365 Jy ! Component: 2800 - total flux cleaned = -0.001144 Jy ! Component: 2850 - total flux cleaned = -0.00102517 Jy ! Component: 2900 - total flux cleaned = -0.000927229 Jy ! Component: 2950 - total flux cleaned = -0.000849136 Jy ! Component: 3000 - total flux cleaned = -0.000714011 Jy ! Component: 3050 - total flux cleaned = -0.000541308 Jy ! Component: 3100 - total flux cleaned = -0.000541598 Jy ! Component: 3150 - total flux cleaned = -0.000484549 Jy ! Component: 3200 - total flux cleaned = -0.000296844 Jy ! Component: 3250 - total flux cleaned = -0.000259746 Jy ! Component: 3300 - total flux cleaned = -0.000148682 Jy ! Component: 3350 - total flux cleaned = -1.8311e-06 Jy ! Component: 3400 - total flux cleaned = 5.27459e-05 Jy ! Component: 3450 - total flux cleaned = 0.000161446 Jy ! Component: 3500 - total flux cleaned = 0.00025129 Jy ! Component: 3550 - total flux cleaned = 0.000287114 Jy ! Component: 3600 - total flux cleaned = 0.000375914 Jy ! Component: 3650 - total flux cleaned = 0.000428823 Jy ! Component: 3700 - total flux cleaned = 0.000516331 Jy ! Component: 3750 - total flux cleaned = 0.000585916 Jy ! Component: 3800 - total flux cleaned = 0.000654981 Jy ! Component: 3850 - total flux cleaned = 0.000706576 Jy ! Component: 3900 - total flux cleaned = 0.000826126 Jy ! Component: 3950 - total flux cleaned = 0.000927832 Jy ! Component: 4000 - total flux cleaned = 0.000978584 Jy ! Component: 4050 - total flux cleaned = 0.00112938 Jy ! Total flux subtracted in 4096 components = 0.00119597 Jy ! Clean residual min=-0.001062 max=0.001006 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.174916 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 351 components and 0.174916 Jy ![Exited script file: muppet] wmap "J1450+0910_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.653 at -3.157 degrees (North through East) ! Clean map min=-0.0020872 max=0.16469 Jy/beam ! Writing clean map to FITS file: J1450+0910_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000297487 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.541893 0.541893 1.08379 2.16757 4.33514 8.67029 17.3406 34.6811 69.3623 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.653 at -3.157 degrees (North through East) ! Clean map min=-0.0020872 max=0.16469 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1450+0910_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:27 2019