! Started logfile: J1449-0045_S_2017_02_24_pus_uvs.log on Sat May 4 11:28:57 2019 obs J1449-0045_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1449-0045_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972468 visibilities/baseline/integration-bin. ! Found source: J1449-0045 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 19780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1449-0045_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.763311Jy sigma=0.009185 ! Fit after self-cal, rms=0.757040Jy sigma=0.009146 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.204 mas, bpa=-3.183 degrees ! Estimated noise=794.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175982 Jy ! Component: 100 - total flux cleaned = 0.214424 Jy ! Total flux subtracted in 100 components = 0.214424 Jy ! Clean residual min=-0.017179 max=0.020704 Jy/beam ! Clean residual mean=-0.000004 rms=0.005746 Jy/beam ! Combined flux in latest and established models = 0.214424 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.214424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107319Jy sigma=0.001528 ! Fit after self-cal, rms=0.107293Jy sigma=0.001528 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=8.125 mas, bpa=-4.218 degrees ! Estimated noise=618.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156762 Jy ! Component: 100 - total flux cleaned = 0.0218598 Jy ! Component: 150 - total flux cleaned = 0.0218962 Jy ! Component: 200 - total flux cleaned = 0.0214276 Jy ! Total flux subtracted in 200 components = 0.0214276 Jy ! Clean residual min=-0.015198 max=0.015889 Jy/beam ! Clean residual mean=-0.000077 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 0.235852 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.235852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102011Jy sigma=0.001621 ! Fit after self-cal, rms=0.101979Jy sigma=0.001620 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 1.00 KP 0.93 ! LA 0.93 MK 0.97 NL 0.94 OV 1.02 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 1.04 KP 0.89 ! LA 0.88 MK 0.94 NL 0.91 OV 1.06 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 0.99 KP 0.98 ! LA 0.97 MK 0.99 NL 1.02 OV 0.95 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 0.96 KP 1.00* ! LA 8.54 MK 1.14 NL 1.00* OV 0.94 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.101979Jy sigma=0.001620 ! Fit after self-cal, rms=0.393671Jy sigma=0.000750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.045 mas, bpa=-3.986 degrees ! Estimated noise=630.526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606692 Jy ! Component: 100 - total flux cleaned = 0.00862748 Jy ! Component: 150 - total flux cleaned = 0.0100566 Jy ! Component: 200 - total flux cleaned = 0.0106119 Jy ! Total flux subtracted in 200 components = 0.0106119 Jy ! Clean residual min=-0.004517 max=0.004432 Jy/beam ! Clean residual mean=0.000004 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.246464 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.246464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392470Jy sigma=0.000752 ! Fit after self-cal, rms=0.392846Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392846Jy sigma=0.000748 ! Fit after self-cal, rms=0.427526Jy sigma=0.000738 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.982 mas, bpa=-3.792 degrees ! Estimated noise=645.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566981 Jy ! Component: 100 - total flux cleaned = 0.00810281 Jy ! Component: 150 - total flux cleaned = 0.00956241 Jy ! Component: 200 - total flux cleaned = 0.0104938 Jy ! Total flux subtracted in 200 components = 0.0104938 Jy ! Clean residual min=-0.004588 max=0.003970 Jy/beam ! Clean residual mean=0.000013 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.256957 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.256957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426370Jy sigma=0.000740 ! Fit after self-cal, rms=0.426390Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007334 Jy ! Component: 100 - total flux cleaned = 0.000842786 Jy ! Component: 150 - total flux cleaned = 0.000879396 Jy ! Component: 200 - total flux cleaned = 0.000896045 Jy ! Total flux subtracted in 200 components = 0.000896045 Jy ! Clean residual min=-0.004606 max=0.003975 Jy/beam ! Clean residual mean=0.000012 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.257853 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.257853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426321Jy sigma=0.000740 ! Fit after self-cal, rms=0.426321Jy sigma=0.000740 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426321Jy sigma=0.000740 ! Fit after self-cal, rms=0.117524Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.975 mas, bpa=-3.686 degrees ! Estimated noise=649.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113094 Jy ! Component: 100 - total flux cleaned = 0.0012748 Jy ! Component: 150 - total flux cleaned = 0.00123016 Jy ! Component: 200 - total flux cleaned = 0.00117112 Jy ! Total flux subtracted in 200 components = 0.00117112 Jy ! Clean residual min=-0.002079 max=0.002917 Jy/beam ! Clean residual mean=0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.259024 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.259025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117466Jy sigma=0.000694 ! Fit after self-cal, rms=0.117335Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284565 Jy ! Component: 100 - total flux cleaned = 0.00391285 Jy ! Component: 150 - total flux cleaned = 0.00409024 Jy ! Component: 200 - total flux cleaned = 0.00423381 Jy ! Total flux subtracted in 200 components = 0.00423381 Jy ! Clean residual min=-0.001884 max=0.001716 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.263258 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 0.263258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117290Jy sigma=0.000692 ! Fit after self-cal, rms=0.117285Jy sigma=0.000692 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117285Jy sigma=0.000692 ! Fit after self-cal, rms=0.117723Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=12.36 mas, bpa=-0.07473 degrees ! Estimated noise=802.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180294 Jy ! Component: 100 - total flux cleaned = 0.00273155 Jy ! Component: 150 - total flux cleaned = 0.00311455 Jy ! Component: 200 - total flux cleaned = 0.00329067 Jy ! Total flux subtracted in 200 components = 0.00329067 Jy ! Clean residual min=-0.001643 max=0.001542 Jy/beam ! Clean residual mean=-0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.266549 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 112 components and 0.266549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117678Jy sigma=0.000692 ! Fit after self-cal, rms=0.117674Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309189 Jy ! Component: 100 - total flux cleaned = 0.000342374 Jy ! Component: 150 - total flux cleaned = 0.000368307 Jy ! Component: 200 - total flux cleaned = 0.000379555 Jy ! Total flux subtracted in 200 components = 0.000379555 Jy ! Clean residual min=-0.001649 max=0.001507 Jy/beam ! Clean residual mean=-0.000002 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.266928 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.266928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117671Jy sigma=0.000692 ! Fit after self-cal, rms=0.117669Jy sigma=0.000692 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.962 mas, bpa=-3.607 degrees ! Estimated noise=651.015 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.962 at -3.607 degrees (North through East) ! Clean map min=-0.0016563 max=0.24108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.074 mas, bpa=-2.237 degrees ! Estimated noise=847.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187589 Jy ! Component: 100 - total flux cleaned = 0.230116 Jy ! Component: 150 - total flux cleaned = 0.245249 Jy ! Component: 200 - total flux cleaned = 0.252221 Jy ! Total flux subtracted in 200 components = 0.252221 Jy ! Clean residual min=-0.003637 max=0.003417 Jy/beam ! Clean residual mean=0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.252221 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.252221 Jy ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.962 mas, bpa=-3.607 degrees ! Estimated noise=651.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053203 Jy ! Component: 100 - total flux cleaned = 0.00846588 Jy ! Component: 150 - total flux cleaned = 0.0105466 Jy ! Component: 200 - total flux cleaned = 0.0118103 Jy ! Total flux subtracted in 200 components = 0.0118103 Jy ! Clean residual min=-0.001914 max=0.001765 Jy/beam ! Clean residual mean=0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.264031 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.264031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=12.36 mas, bpa=-0.07473 degrees ! Estimated noise=802.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154122 Jy ! Component: 100 - total flux cleaned = 0.00204953 Jy ! Component: 150 - total flux cleaned = 0.0022549 Jy ! Component: 200 - total flux cleaned = 0.00232635 Jy ! Total flux subtracted in 200 components = 0.00232635 Jy ! Clean residual min=-0.001747 max=0.001554 Jy/beam ! Clean residual mean=-0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.266358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.20432e-05 Jy ! Component: 100 - total flux cleaned = 0.000116975 Jy ! Component: 150 - total flux cleaned = 0.000181703 Jy ! Component: 200 - total flux cleaned = 0.000225307 Jy ! Total flux subtracted in 200 components = 0.000225307 Jy ! Clean residual min=-0.001695 max=0.001513 Jy/beam ! Clean residual mean=-0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.266583 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 106 components and 0.266583 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.962 mas, bpa=-3.607 degrees ! Estimated noise=651.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206278 Jy ! Component: 100 - total flux cleaned = -0.000149971 Jy ! Component: 150 - total flux cleaned = -0.000176698 Jy ! Component: 200 - total flux cleaned = -0.000176865 Jy ! Total flux subtracted in 200 components = -0.000176865 Jy ! Clean residual min=-0.001695 max=0.001661 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.266406 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 118 components and 0.266406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117680Jy sigma=0.000692 ! Fit after self-cal, rms=0.117681Jy sigma=0.000692 wmodel J1449-0045_S_2017_02_24_pus_map.mod ! Writing 118 model components to file: J1449-0045_S_2017_02_24_pus_map.mod wobs J1449-0045_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1449-0045_S_2017_02_24_pus_uvs.fits wwins J1449-0045_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1449-0045_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155557 Jy ! Component: 100 - total flux cleaned = -0.000356861 Jy ! Component: 150 - total flux cleaned = -0.00054941 Jy ! Component: 200 - total flux cleaned = -0.000736748 Jy ! Component: 250 - total flux cleaned = -0.00089304 Jy ! Component: 300 - total flux cleaned = -0.0010456 Jy ! Component: 350 - total flux cleaned = -0.00116984 Jy ! Component: 400 - total flux cleaned = -0.0011938 Jy ! Component: 450 - total flux cleaned = -0.00128982 Jy ! Component: 500 - total flux cleaned = -0.00143053 Jy ! Component: 550 - total flux cleaned = -0.00152272 Jy ! Component: 600 - total flux cleaned = -0.00156787 Jy ! Component: 650 - total flux cleaned = -0.00167977 Jy ! Component: 700 - total flux cleaned = -0.00170168 Jy ! Component: 750 - total flux cleaned = -0.00174508 Jy ! Component: 800 - total flux cleaned = -0.00172328 Jy ! Component: 850 - total flux cleaned = -0.00165954 Jy ! Component: 900 - total flux cleaned = -0.00170177 Jy ! Component: 950 - total flux cleaned = -0.00166008 Jy ! Component: 1000 - total flux cleaned = -0.00166044 Jy ! Component: 1050 - total flux cleaned = -0.00168089 Jy ! Component: 1100 - total flux cleaned = -0.00168079 Jy ! Component: 1150 - total flux cleaned = -0.001661 Jy ! Component: 1200 - total flux cleaned = -0.00166139 Jy ! Component: 1250 - total flux cleaned = -0.00168117 Jy ! Component: 1300 - total flux cleaned = -0.00171959 Jy ! Component: 1350 - total flux cleaned = -0.001739 Jy ! Component: 1400 - total flux cleaned = -0.00177652 Jy ! Component: 1450 - total flux cleaned = -0.00185144 Jy ! Component: 1500 - total flux cleaned = -0.00183296 Jy ! Component: 1550 - total flux cleaned = -0.00190641 Jy ! Component: 1600 - total flux cleaned = -0.00197891 Jy ! Component: 1650 - total flux cleaned = -0.00203308 Jy ! Component: 1700 - total flux cleaned = -0.00210444 Jy ! Component: 1750 - total flux cleaned = -0.0021042 Jy ! Component: 1800 - total flux cleaned = -0.00217443 Jy ! Component: 1850 - total flux cleaned = -0.00222677 Jy ! Component: 1900 - total flux cleaned = -0.00220946 Jy ! Component: 1950 - total flux cleaned = -0.00234656 Jy ! Component: 2000 - total flux cleaned = -0.00238068 Jy ! Component: 2050 - total flux cleaned = -0.00243148 Jy ! Component: 2100 - total flux cleaned = -0.00251511 Jy ! Component: 2150 - total flux cleaned = -0.00256478 Jy ! Component: 2200 - total flux cleaned = -0.00263078 Jy ! Component: 2250 - total flux cleaned = -0.00271269 Jy ! Component: 2300 - total flux cleaned = -0.00276114 Jy ! Component: 2350 - total flux cleaned = -0.0027611 Jy ! Component: 2400 - total flux cleaned = -0.002825 Jy ! Component: 2450 - total flux cleaned = -0.00293609 Jy ! Component: 2500 - total flux cleaned = -0.00296772 Jy ! Component: 2550 - total flux cleaned = -0.00303031 Jy ! Component: 2600 - total flux cleaned = -0.00306137 Jy ! Component: 2650 - total flux cleaned = -0.00315386 Jy ! Component: 2700 - total flux cleaned = -0.00318443 Jy ! Component: 2750 - total flux cleaned = -0.00327559 Jy ! Component: 2800 - total flux cleaned = -0.00326052 Jy ! Component: 2850 - total flux cleaned = -0.00335043 Jy ! Component: 2900 - total flux cleaned = -0.00338017 Jy ! Component: 2950 - total flux cleaned = -0.00339489 Jy ! Component: 3000 - total flux cleaned = -0.00343912 Jy ! Component: 3050 - total flux cleaned = -0.00351205 Jy ! Component: 3100 - total flux cleaned = -0.0035409 Jy ! Component: 3150 - total flux cleaned = -0.00348332 Jy ! Component: 3200 - total flux cleaned = -0.00352641 Jy ! Component: 3250 - total flux cleaned = -0.00351225 Jy ! Component: 3300 - total flux cleaned = -0.00355475 Jy ! Component: 3350 - total flux cleaned = -0.00356872 Jy ! Component: 3400 - total flux cleaned = -0.00356864 Jy ! Component: 3450 - total flux cleaned = -0.00361026 Jy ! Component: 3500 - total flux cleaned = -0.00359645 Jy ! Component: 3550 - total flux cleaned = -0.0036376 Jy ! Component: 3600 - total flux cleaned = -0.00370577 Jy ! Component: 3650 - total flux cleaned = -0.0036787 Jy ! Component: 3700 - total flux cleaned = -0.00374599 Jy ! Component: 3750 - total flux cleaned = -0.00375944 Jy ! Component: 3800 - total flux cleaned = -0.00379935 Jy ! Component: 3850 - total flux cleaned = -0.00382569 Jy ! Component: 3900 - total flux cleaned = -0.00381244 Jy ! Component: 3950 - total flux cleaned = -0.00385171 Jy ! Component: 4000 - total flux cleaned = -0.00386471 Jy ! Component: 4050 - total flux cleaned = -0.0038777 Jy ! Total flux subtracted in 4096 components = -0.00390341 Jy ! Clean residual min=-0.000761 max=0.000798 Jy/beam ! Clean residual mean=-0.000000 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.262503 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 413 components and 0.262503 Jy ![Exited script file: muppet] wmap "J1449-0045_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.962 at -3.607 degrees (North through East) ! Clean map min=-0.0014766 max=0.24184 Jy/beam ! Writing clean map to FITS file: J1449-0045_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.241835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243482 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.302042 0.302042 0.604085 1.20817 2.41634 4.83268 9.66535 19.3307 38.6614 77.3228 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.241 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 7.962 at -3.607 degrees (North through East) ! Clean map min=-0.0014766 max=0.24184 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1449-0045_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:29:02 2019