! Started logfile: J1448-1122_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:51:43 2019 obs J1448-1122_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1448-1122_S_2017_05_31_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784211 visibilities/baseline/integration-bin. ! Found source: J1448-1122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 10728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1448-1122_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 417 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903906Jy sigma=0.007579 ! Fit after self-cal, rms=0.896678Jy sigma=0.007526 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=7.587 mas, bpa=0.9247 degrees ! Estimated noise=1133.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0822632 Jy ! Component: 100 - total flux cleaned = 0.101656 Jy ! Total flux subtracted in 100 components = 0.101656 Jy ! Clean residual min=-0.004679 max=0.007278 Jy/beam ! Clean residual mean=-0.000020 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.101656 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.101656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087475Jy sigma=0.000682 ! Fit after self-cal, rms=0.087465Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.545 mas, bpa=1.869 degrees ! Estimated noise=928.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087077 Jy ! Component: 100 - total flux cleaned = 0.0123504 Jy ! Component: 150 - total flux cleaned = 0.0142949 Jy ! Component: 200 - total flux cleaned = 0.0153758 Jy ! Total flux subtracted in 200 components = 0.0153758 Jy ! Clean residual min=-0.003937 max=0.004414 Jy/beam ! Clean residual mean=-0.000011 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.117031 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.117031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086797Jy sigma=0.000675 ! Fit after self-cal, rms=0.086788Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.91 HN 1.03 KP 1.03 ! LA 0.97 MK 1.02 NL 0.93 OV 1.01 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.00 KP 1.04 ! LA 0.95 MK 1.01 NL 1.10 OV 1.00 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.05 KP 1.00 ! LA 0.94 MK 1.02 NL 1.06 OV 0.94 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.89 KP 0.92 ! LA 1.10 MK 0.98 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.086788Jy sigma=0.000675 ! Fit after self-cal, rms=0.087077Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=8.603 mas, bpa=2.08 degrees ! Estimated noise=929.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000864576 Jy ! Component: 100 - total flux cleaned = -0.00104155 Jy ! Component: 150 - total flux cleaned = -0.00111145 Jy ! Component: 200 - total flux cleaned = -0.00115332 Jy ! Total flux subtracted in 200 components = -0.00115332 Jy ! Clean residual min=-0.004099 max=0.003902 Jy/beam ! Clean residual mean=-0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.115878 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.115878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087053Jy sigma=0.000672 ! Fit after self-cal, rms=0.087093Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087093Jy sigma=0.000672 ! Fit after self-cal, rms=0.091565Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=8.607 mas, bpa=1.942 degrees ! Estimated noise=928.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250145 Jy ! Component: 100 - total flux cleaned = -0.000358535 Jy ! Component: 150 - total flux cleaned = -0.000393318 Jy ! Component: 200 - total flux cleaned = -0.0003935 Jy ! Total flux subtracted in 200 components = -0.0003935 Jy ! Clean residual min=-0.004005 max=0.003355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.115485 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.115485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091553Jy sigma=0.000669 ! Fit after self-cal, rms=0.091725Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.85151e-05 Jy ! Component: 100 - total flux cleaned = -9.52389e-05 Jy ! Component: 150 - total flux cleaned = -9.55758e-05 Jy ! Component: 200 - total flux cleaned = -9.60865e-05 Jy ! Total flux subtracted in 200 components = -9.60865e-05 Jy ! Clean residual min=-0.003979 max=0.003419 Jy/beam ! Clean residual mean=-0.000002 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.115389 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.115389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091721Jy sigma=0.000669 ! Fit after self-cal, rms=0.091719Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091719Jy sigma=0.000669 ! Fit after self-cal, rms=0.092473Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=8.623 mas, bpa=1.812 degrees ! Estimated noise=928.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293675 Jy ! Component: 100 - total flux cleaned = -0.000374751 Jy ! Component: 150 - total flux cleaned = -0.000400082 Jy ! Component: 200 - total flux cleaned = -0.000421416 Jy ! Total flux subtracted in 200 components = -0.000421416 Jy ! Clean residual min=-0.003961 max=0.003380 Jy/beam ! Clean residual mean=-0.000002 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.114967 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.114967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092466Jy sigma=0.000669 ! Fit after self-cal, rms=0.092519Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.22641e-05 Jy ! Component: 100 - total flux cleaned = -4.37477e-05 Jy ! Component: 150 - total flux cleaned = -4.38439e-05 Jy ! Component: 200 - total flux cleaned = -5.23209e-05 Jy ! Total flux subtracted in 200 components = -5.23209e-05 Jy ! Clean residual min=-0.003969 max=0.003399 Jy/beam ! Clean residual mean=-0.000002 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.114915 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.114915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092517Jy sigma=0.000669 ! Fit after self-cal, rms=0.092515Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092515Jy sigma=0.000669 ! Fit after self-cal, rms=0.092921Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.488 mas, bmaj=14.94 mas, bpa=3.463 degrees ! Estimated noise=1137.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214304 Jy ! Component: 100 - total flux cleaned = -0.000214355 Jy ! Component: 150 - total flux cleaned = -0.00024586 Jy ! Component: 200 - total flux cleaned = -0.000292017 Jy ! Total flux subtracted in 200 components = -0.000292017 Jy ! Clean residual min=-0.005405 max=0.004551 Jy/beam ! Clean residual mean=-0.000004 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.114623 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 63 components and 0.114623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092930Jy sigma=0.000669 ! Fit after self-cal, rms=0.092963Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100445 Jy ! Component: 100 - total flux cleaned = -0.000134441 Jy ! Component: 150 - total flux cleaned = -0.000147728 Jy ! Component: 200 - total flux cleaned = -0.000147459 Jy ! Total flux subtracted in 200 components = -0.000147459 Jy ! Clean residual min=-0.005412 max=0.004502 Jy/beam ! Clean residual mean=-0.000005 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.114475 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.114475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092971Jy sigma=0.000669 ! Fit after self-cal, rms=0.092965Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.64 mas, bpa=1.693 degrees ! Estimated noise=928.315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.64 at 1.693 degrees (North through East) ! Clean map min=-0.0039465 max=0.10617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=7.659 mas, bpa=0.5315 degrees ! Estimated noise=1157.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0821262 Jy ! Component: 100 - total flux cleaned = 0.102432 Jy ! Component: 150 - total flux cleaned = 0.110162 Jy ! Component: 200 - total flux cleaned = 0.11281 Jy ! Total flux subtracted in 200 components = 0.11281 Jy ! Clean residual min=-0.004355 max=0.003602 Jy/beam ! Clean residual mean=0.000001 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.11281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.11281 Jy ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.64 mas, bpa=1.693 degrees ! Estimated noise=928.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181161 Jy ! Component: 100 - total flux cleaned = 0.00175545 Jy ! Component: 150 - total flux cleaned = 0.00171646 Jy ! Component: 200 - total flux cleaned = 0.0017192 Jy ! Total flux subtracted in 200 components = 0.0017192 Jy ! Clean residual min=-0.004013 max=0.003374 Jy/beam ! Clean residual mean=-0.000002 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.114529 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.114529 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.488 mas, bmaj=14.94 mas, bpa=3.463 degrees ! Estimated noise=1137.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.66762e-05 Jy ! Component: 100 - total flux cleaned = 7.20079e-05 Jy ! Component: 150 - total flux cleaned = 0.000108422 Jy ! Component: 200 - total flux cleaned = 0.000121935 Jy ! Total flux subtracted in 200 components = 0.000121935 Jy ! Clean residual min=-0.005379 max=0.004549 Jy/beam ! Clean residual mean=-0.000004 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.114651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28251e-05 Jy ! Component: 100 - total flux cleaned = 3.20774e-06 Jy ! Component: 150 - total flux cleaned = -1.4123e-05 Jy ! Component: 200 - total flux cleaned = -2.9195e-05 Jy ! Total flux subtracted in 200 components = -2.9195e-05 Jy ! Clean residual min=-0.005381 max=0.004539 Jy/beam ! Clean residual mean=-0.000004 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.114622 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.114622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=8.64 mas, bpa=1.693 degrees ! Estimated noise=928.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.93059e-05 Jy ! Component: 100 - total flux cleaned = -4.94094e-05 Jy ! Component: 150 - total flux cleaned = -9.7328e-05 Jy ! Component: 200 - total flux cleaned = -0.000117957 Jy ! Total flux subtracted in 200 components = -0.000117957 Jy ! Clean residual min=-0.004004 max=0.003461 Jy/beam ! Clean residual mean=-0.000002 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.114504 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.114504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092976Jy sigma=0.000669 ! Fit after self-cal, rms=0.092967Jy sigma=0.000669 wmodel J1448-1122_S_2017_05_31_pus_map.mod ! Writing 48 model components to file: J1448-1122_S_2017_05_31_pus_map.mod wobs J1448-1122_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1448-1122_S_2017_05_31_pus_uvs.fits wwins J1448-1122_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1448-1122_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115912 Jy ! Component: 100 - total flux cleaned = -0.00139971 Jy ! Component: 150 - total flux cleaned = -0.00113445 Jy ! Component: 200 - total flux cleaned = -0.000936593 Jy ! Component: 250 - total flux cleaned = -0.000751525 Jy ! Component: 300 - total flux cleaned = -0.000445672 Jy ! Component: 350 - total flux cleaned = -0.000404954 Jy ! Component: 400 - total flux cleaned = -0.000365278 Jy ! Component: 450 - total flux cleaned = -0.000249584 Jy ! Component: 500 - total flux cleaned = -0.000175623 Jy ! Component: 550 - total flux cleaned = -0.000139585 Jy ! Component: 600 - total flux cleaned = -7.0489e-05 Jy ! Component: 650 - total flux cleaned = -3.68205e-06 Jy ! Component: 700 - total flux cleaned = 2.84468e-05 Jy ! Component: 750 - total flux cleaned = 0.000123442 Jy ! Component: 800 - total flux cleaned = 9.13838e-05 Jy ! Component: 850 - total flux cleaned = 3.08746e-05 Jy ! Component: 900 - total flux cleaned = -5.75417e-05 Jy ! Component: 950 - total flux cleaned = -0.000114698 Jy ! Component: 1000 - total flux cleaned = -8.59143e-05 Jy ! Component: 1050 - total flux cleaned = -0.000114146 Jy ! Component: 1100 - total flux cleaned = -0.000141307 Jy ! Component: 1150 - total flux cleaned = -0.000141332 Jy ! Component: 1200 - total flux cleaned = -0.000193628 Jy ! Component: 1250 - total flux cleaned = -0.000219438 Jy ! Component: 1300 - total flux cleaned = -0.000194794 Jy ! Component: 1350 - total flux cleaned = -0.000219908 Jy ! Component: 1400 - total flux cleaned = -0.000195809 Jy ! Component: 1450 - total flux cleaned = -0.000101193 Jy ! Component: 1500 - total flux cleaned = -7.76326e-05 Jy ! Component: 1550 - total flux cleaned = -8.2631e-06 Jy ! Component: 1600 - total flux cleaned = 0.000104514 Jy ! Component: 1650 - total flux cleaned = 0.000126642 Jy ! Component: 1700 - total flux cleaned = 0.000105026 Jy ! Component: 1750 - total flux cleaned = 0.000191224 Jy ! Component: 1800 - total flux cleaned = 0.000212442 Jy ! Component: 1850 - total flux cleaned = 0.000274893 Jy ! Component: 1900 - total flux cleaned = 0.000254135 Jy ! Component: 1950 - total flux cleaned = 0.000335869 Jy ! Component: 2000 - total flux cleaned = 0.000436751 Jy ! Component: 2050 - total flux cleaned = 0.000476664 Jy ! Component: 2100 - total flux cleaned = 0.000575316 Jy ! Component: 2150 - total flux cleaned = 0.000672498 Jy ! Component: 2200 - total flux cleaned = 0.000691559 Jy ! Component: 2250 - total flux cleaned = 0.000786657 Jy ! Component: 2300 - total flux cleaned = 0.000767819 Jy ! Component: 2350 - total flux cleaned = 0.000860787 Jy ! Component: 2400 - total flux cleaned = 0.00074998 Jy ! Component: 2450 - total flux cleaned = 0.00082321 Jy ! Component: 2500 - total flux cleaned = 0.00080509 Jy ! Component: 2550 - total flux cleaned = 0.000733353 Jy ! Component: 2600 - total flux cleaned = 0.000715485 Jy ! Component: 2650 - total flux cleaned = 0.000750899 Jy ! Component: 2700 - total flux cleaned = 0.000768485 Jy ! Component: 2750 - total flux cleaned = 0.000786031 Jy ! Component: 2800 - total flux cleaned = 0.000786078 Jy ! Component: 2850 - total flux cleaned = 0.000786185 Jy ! Component: 2900 - total flux cleaned = 0.000837308 Jy ! Component: 2950 - total flux cleaned = 0.000820188 Jy ! Component: 3000 - total flux cleaned = 0.000870543 Jy ! Component: 3050 - total flux cleaned = 0.000853877 Jy ! Component: 3100 - total flux cleaned = 0.000920173 Jy ! Component: 3150 - total flux cleaned = 0.000920209 Jy ! Component: 3200 - total flux cleaned = 0.000903717 Jy ! Component: 3250 - total flux cleaned = 0.000936303 Jy ! Component: 3300 - total flux cleaned = 0.000952563 Jy ! Component: 3350 - total flux cleaned = 0.000920244 Jy ! Component: 3400 - total flux cleaned = 0.000920252 Jy ! Component: 3450 - total flux cleaned = 0.000920213 Jy ! Component: 3500 - total flux cleaned = 0.000920215 Jy ! Component: 3550 - total flux cleaned = 0.000888436 Jy ! Component: 3600 - total flux cleaned = 0.000920111 Jy ! Component: 3650 - total flux cleaned = 0.000904394 Jy ! Component: 3700 - total flux cleaned = 0.000920318 Jy ! Component: 3750 - total flux cleaned = 0.000935967 Jy ! Component: 3800 - total flux cleaned = 0.00092027 Jy ! Component: 3850 - total flux cleaned = 0.00096698 Jy ! Component: 3900 - total flux cleaned = 0.000966918 Jy ! Component: 3950 - total flux cleaned = 0.0009669 Jy ! Component: 4000 - total flux cleaned = 0.00098228 Jy ! Component: 4050 - total flux cleaned = 0.000997663 Jy ! Total flux subtracted in 4096 components = 0.000997564 Jy ! Clean residual min=-0.000919 max=0.001017 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.115502 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 346 components and 0.115502 Jy ![Exited script file: muppet] wmap "J1448-1122_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.64 at 1.693 degrees (North through East) ! Clean map min=-0.0032805 max=0.10566 Jy/beam ! Writing clean map to FITS file: J1448-1122_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277189 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.787031 0.787031 1.57406 3.14812 6.29625 12.5925 25.185 50.37 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.359 x 8.64 at 1.693 degrees (North through East) ! Clean map min=-0.0032805 max=0.10566 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1448-1122_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:51:48 2019