! Started logfile: J1445-2445_S_2017_08_05_pus_uvs.log on Thu May 9 19:31:32 2019 obs J1445-2445_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1445-2445_S_2017_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.725794 visibilities/baseline/integration-bin. ! Found source: J1445-2445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 7316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-2445_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 414 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945900Jy sigma=0.006714 ! Fit after self-cal, rms=0.922260Jy sigma=0.006570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=6.916 mas, bpa=-6.091 degrees ! Estimated noise=2089.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633187 Jy ! Component: 100 - total flux cleaned = 0.0778632 Jy ! Total flux subtracted in 100 components = 0.0778632 Jy ! Clean residual min=-0.007250 max=0.006471 Jy/beam ! Clean residual mean=0.000000 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.0778632 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0778632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099819Jy sigma=0.000668 ! Fit after self-cal, rms=0.099776Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.918 mas, bpa=-3.632 degrees ! Estimated noise=1394.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582865 Jy ! Component: 100 - total flux cleaned = 0.00828453 Jy ! Component: 150 - total flux cleaned = 0.00901789 Jy ! Component: 200 - total flux cleaned = 0.00927676 Jy ! Total flux subtracted in 200 components = 0.00927676 Jy ! Clean residual min=-0.004195 max=0.003845 Jy/beam ! Clean residual mean=0.000018 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.08714 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.08714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099422Jy sigma=0.000666 ! Fit after self-cal, rms=0.099433Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.06 KP 0.95 ! LA 0.98 MK 0.97 NL 0.94 OV 0.96 ! PT 1.08 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.17 KP 0.98 ! LA 0.96 MK 1.04 NL 1.08 OV 1.09 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.15 KP 0.81 ! LA 0.79 MK 1.11 NL 1.15 OV 0.96 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.82 KP 1.00* ! LA 1.00* MK 0.94 NL 1.00* OV 1.00* ! PT 1.23 SC 1.00* ! ! ! Fit before self-cal, rms=0.099433Jy sigma=0.000666 ! Fit after self-cal, rms=0.098445Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.894 mas, bpa=-2.931 degrees ! Estimated noise=1395.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123676 Jy ! Component: 100 - total flux cleaned = -0.000151367 Jy ! Component: 150 - total flux cleaned = -0.000151361 Jy ! Component: 200 - total flux cleaned = -0.000133665 Jy ! Total flux subtracted in 200 components = -0.000133665 Jy ! Clean residual min=-0.004036 max=0.003708 Jy/beam ! Clean residual mean=0.000024 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.0870063 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0870063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098430Jy sigma=0.000663 ! Fit after self-cal, rms=0.098416Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098416Jy sigma=0.000662 ! Fit after self-cal, rms=0.099499Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.897 mas, bpa=-2.748 degrees ! Estimated noise=1400.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.8352e-05 Jy ! Component: 100 - total flux cleaned = 0.000120628 Jy ! Component: 150 - total flux cleaned = 0.000174602 Jy ! Component: 200 - total flux cleaned = 0.000222191 Jy ! Total flux subtracted in 200 components = 0.000222191 Jy ! Clean residual min=-0.003905 max=0.003906 Jy/beam ! Clean residual mean=0.000016 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0872285 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0872285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099491Jy sigma=0.000660 ! Fit after self-cal, rms=0.099548Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (69.5, 38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345179 Jy ! Component: 100 - total flux cleaned = 0.00470191 Jy ! Component: 150 - total flux cleaned = 0.00489505 Jy ! Component: 200 - total flux cleaned = 0.00513942 Jy ! Total flux subtracted in 200 components = 0.00513942 Jy ! Clean residual min=-0.003426 max=0.003181 Jy/beam ! Clean residual mean=0.000010 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0923679 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 66 components and 0.0923679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099420Jy sigma=0.000659 ! Fit after self-cal, rms=0.099409Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099409Jy sigma=0.000659 ! Fit after self-cal, rms=0.099508Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=7.893 mas, bpa=-2.629 degrees ! Estimated noise=1390.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118433 Jy ! Component: 100 - total flux cleaned = 0.00130351 Jy ! Component: 150 - total flux cleaned = 0.00137558 Jy ! Component: 200 - total flux cleaned = 0.00150005 Jy ! Total flux subtracted in 200 components = 0.00150005 Jy ! Clean residual min=-0.003235 max=0.003355 Jy/beam ! Clean residual mean=0.000008 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.093868 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.093868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099471Jy sigma=0.000659 ! Fit after self-cal, rms=0.099516Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222483 Jy ! Component: 100 - total flux cleaned = 0.000312106 Jy ! Component: 150 - total flux cleaned = 0.000398593 Jy ! Component: 200 - total flux cleaned = 0.000531715 Jy ! Total flux subtracted in 200 components = 0.000531715 Jy ! Clean residual min=-0.003197 max=0.003365 Jy/beam ! Clean residual mean=0.000009 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0943997 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.0943997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099496Jy sigma=0.000659 ! Fit after self-cal, rms=0.099500Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099500Jy sigma=0.000659 ! Fit after self-cal, rms=0.099419Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=19.89 mas, bpa=-1.522 degrees ! Estimated noise=1803.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011431 Jy ! Component: 100 - total flux cleaned = 0.00122395 Jy ! Component: 150 - total flux cleaned = 0.00122417 Jy ! Component: 200 - total flux cleaned = 0.00122352 Jy ! Total flux subtracted in 200 components = 0.00122352 Jy ! Clean residual min=-0.003637 max=0.003129 Jy/beam ! Clean residual mean=0.000017 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.0956232 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 84 components and 0.0956232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099417Jy sigma=0.000659 ! Fit after self-cal, rms=0.099418Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276426 Jy ! Component: 100 - total flux cleaned = 0.000259558 Jy ! Component: 150 - total flux cleaned = 0.000290001 Jy ! Component: 200 - total flux cleaned = 0.000304835 Jy ! Total flux subtracted in 200 components = 0.000304835 Jy ! Clean residual min=-0.003651 max=0.003088 Jy/beam ! Clean residual mean=0.000017 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.095928 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 87 components and 0.095928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099415Jy sigma=0.000659 ! Fit after self-cal, rms=0.099412Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.886 mas, bpa=-2.558 degrees ! Estimated noise=1388.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 7.886 at -2.558 degrees (North through East) ! Clean map min=-0.0029914 max=0.079314 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=6.85 mas, bpa=-5.26 degrees ! Estimated noise=2097.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632306 Jy ! Component: 100 - total flux cleaned = 0.0777034 Jy ! Component: 150 - total flux cleaned = 0.083537 Jy ! Component: 200 - total flux cleaned = 0.08625 Jy ! Total flux subtracted in 200 components = 0.08625 Jy ! Clean residual min=-0.006392 max=0.005129 Jy/beam ! Clean residual mean=0.000001 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.08625 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.08625 Jy ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.886 mas, bpa=-2.558 degrees ! Estimated noise=1388.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308936 Jy ! Component: 100 - total flux cleaned = 0.00504215 Jy ! Component: 150 - total flux cleaned = 0.00591083 Jy ! Component: 200 - total flux cleaned = 0.00649113 Jy ! Total flux subtracted in 200 components = 0.00649113 Jy ! Clean residual min=-0.003317 max=0.003478 Jy/beam ! Clean residual mean=0.000007 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0927412 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.0927412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=19.89 mas, bpa=-1.522 degrees ! Estimated noise=1803.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181452 Jy ! Component: 100 - total flux cleaned = 0.00247457 Jy ! Component: 150 - total flux cleaned = 0.00259998 Jy ! Component: 200 - total flux cleaned = 0.00266175 Jy ! Total flux subtracted in 200 components = 0.00266175 Jy ! Clean residual min=-0.003646 max=0.003068 Jy/beam ! Clean residual mean=0.000016 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.0954029 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.8104e-05 Jy ! Component: 100 - total flux cleaned = 6.84782e-05 Jy ! Component: 150 - total flux cleaned = 8.46025e-05 Jy ! Component: 200 - total flux cleaned = 0.000132277 Jy ! Total flux subtracted in 200 components = 0.000132277 Jy ! Clean residual min=-0.003651 max=0.003067 Jy/beam ! Clean residual mean=0.000016 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.0955352 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0955352 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.886 mas, bpa=-2.558 degrees ! Estimated noise=1388.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398147 Jy ! Component: 100 - total flux cleaned = -0.000443942 Jy ! Component: 150 - total flux cleaned = -0.000409403 Jy ! Component: 200 - total flux cleaned = -0.000409933 Jy ! Total flux subtracted in 200 components = -0.000409933 Jy ! Clean residual min=-0.003358 max=0.003383 Jy/beam ! Clean residual mean=0.000008 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.0951252 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.0951252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099435Jy sigma=0.000659 ! Fit after self-cal, rms=0.099432Jy sigma=0.000659 wmodel J1445-2445_S_2017_08_05_pus_map.mod ! Writing 59 model components to file: J1445-2445_S_2017_08_05_pus_map.mod wobs J1445-2445_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1445-2445_S_2017_08_05_pus_uvs.fits wwins J1445-2445_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1445-2445_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539772 Jy ! Component: 100 - total flux cleaned = -0.00131746 Jy ! Component: 150 - total flux cleaned = -0.00183901 Jy ! Component: 200 - total flux cleaned = -0.00243378 Jy ! Component: 250 - total flux cleaned = -0.0028116 Jy ! Component: 300 - total flux cleaned = -0.00313065 Jy ! Component: 350 - total flux cleaned = -0.00326585 Jy ! Component: 400 - total flux cleaned = -0.00348224 Jy ! Component: 450 - total flux cleaned = -0.003608 Jy ! Component: 500 - total flux cleaned = -0.00377125 Jy ! Component: 550 - total flux cleaned = -0.0039294 Jy ! Component: 600 - total flux cleaned = -0.00412222 Jy ! Component: 650 - total flux cleaned = -0.00427227 Jy ! Component: 700 - total flux cleaned = -0.00430895 Jy ! Component: 750 - total flux cleaned = -0.00441571 Jy ! Component: 800 - total flux cleaned = -0.00448493 Jy ! Component: 850 - total flux cleaned = -0.00455268 Jy ! Component: 900 - total flux cleaned = -0.00458573 Jy ! Component: 950 - total flux cleaned = -0.00455279 Jy ! Component: 1000 - total flux cleaned = -0.00452031 Jy ! Component: 1050 - total flux cleaned = -0.00442498 Jy ! Component: 1100 - total flux cleaned = -0.00439445 Jy ! Component: 1150 - total flux cleaned = -0.00436443 Jy ! Component: 1200 - total flux cleaned = -0.004334 Jy ! Component: 1250 - total flux cleaned = -0.00433432 Jy ! Component: 1300 - total flux cleaned = -0.00433438 Jy ! Component: 1350 - total flux cleaned = -0.0043061 Jy ! Component: 1400 - total flux cleaned = -0.00436373 Jy ! Component: 1450 - total flux cleaned = -0.00439224 Jy ! Component: 1500 - total flux cleaned = -0.00450237 Jy ! Component: 1550 - total flux cleaned = -0.00452942 Jy ! Component: 1600 - total flux cleaned = -0.00463641 Jy ! Component: 1650 - total flux cleaned = -0.0046628 Jy ! Component: 1700 - total flux cleaned = -0.00471532 Jy ! Component: 1750 - total flux cleaned = -0.00479275 Jy ! Component: 1800 - total flux cleaned = -0.0048438 Jy ! Component: 1850 - total flux cleaned = -0.00491909 Jy ! Component: 1900 - total flux cleaned = -0.00496885 Jy ! Component: 1950 - total flux cleaned = -0.00504215 Jy ! Component: 2000 - total flux cleaned = -0.00506631 Jy ! Component: 2050 - total flux cleaned = -0.00513776 Jy ! Component: 2100 - total flux cleaned = -0.00516175 Jy ! Component: 2150 - total flux cleaned = -0.00527801 Jy ! Component: 2200 - total flux cleaned = -0.00536962 Jy ! Component: 2250 - total flux cleaned = -0.00534669 Jy ! Component: 2300 - total flux cleaned = -0.00534675 Jy ! Component: 2350 - total flux cleaned = -0.00543572 Jy ! Component: 2400 - total flux cleaned = -0.00543559 Jy ! Component: 2450 - total flux cleaned = -0.00543557 Jy ! Component: 2500 - total flux cleaned = -0.00543579 Jy ! Component: 2550 - total flux cleaned = -0.00541468 Jy ! Component: 2600 - total flux cleaned = -0.00541471 Jy ! Component: 2650 - total flux cleaned = -0.00547785 Jy ! Component: 2700 - total flux cleaned = -0.00541577 Jy ! Component: 2750 - total flux cleaned = -0.00539529 Jy ! Component: 2800 - total flux cleaned = -0.00541555 Jy ! Component: 2850 - total flux cleaned = -0.00533477 Jy ! Component: 2900 - total flux cleaned = -0.00525478 Jy ! Component: 2950 - total flux cleaned = -0.00521509 Jy ! Component: 3000 - total flux cleaned = -0.00513604 Jy ! Component: 3050 - total flux cleaned = -0.00511638 Jy ! Component: 3100 - total flux cleaned = -0.00505824 Jy ! Component: 3150 - total flux cleaned = -0.00494331 Jy ! Component: 3200 - total flux cleaned = -0.00490532 Jy ! Component: 3250 - total flux cleaned = -0.00473568 Jy ! Component: 3300 - total flux cleaned = -0.00467989 Jy ! Component: 3350 - total flux cleaned = -0.00468014 Jy ! Component: 3400 - total flux cleaned = -0.00451446 Jy ! Component: 3450 - total flux cleaned = -0.00438662 Jy ! Component: 3500 - total flux cleaned = -0.00431417 Jy ! Component: 3550 - total flux cleaned = -0.00422388 Jy ! Component: 3600 - total flux cleaned = -0.0041165 Jy ! Component: 3650 - total flux cleaned = -0.00399222 Jy ! Component: 3700 - total flux cleaned = -0.00393939 Jy ! Component: 3750 - total flux cleaned = -0.00383433 Jy ! Component: 3800 - total flux cleaned = -0.00381686 Jy ! Component: 3850 - total flux cleaned = -0.00364365 Jy ! Component: 3900 - total flux cleaned = -0.00352325 Jy ! Component: 3950 - total flux cleaned = -0.00336961 Jy ! Component: 4000 - total flux cleaned = -0.00331866 Jy ! Component: 4050 - total flux cleaned = -0.00314983 Jy ! Total flux subtracted in 4096 components = -0.00303232 Jy ! Clean residual min=-0.001202 max=0.001114 Jy/beam ! Clean residual mean=0.000005 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0920929 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 348 components and 0.0920929 Jy ![Exited script file: muppet] wmap "J1445-2445_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 7.886 at -2.558 degrees (North through East) ! Clean map min=-0.0020467 max=0.079497 Jy/beam ! Writing clean map to FITS file: J1445-2445_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0794968 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10704 1.10704 2.21407 4.42815 8.85629 17.7126 35.4252 70.8503 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 7.886 at -2.558 degrees (North through East) ! Clean map min=-0.0020467 max=0.079497 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1445-2445_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:31:37 2019