! Started logfile: J1445-1629_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:40 2019 obs J1445-1629_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1445-1629_S_2017_07_09_pus_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-1629_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.908353Jy sigma=0.006417 ! Fit after self-cal, rms=0.758260Jy sigma=0.005436 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=9.488 mas, bpa=-2.491 degrees ! Estimated noise=5251.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184317 Jy ! Component: 100 - total flux cleaned = 0.235319 Jy ! Total flux subtracted in 100 components = 0.235319 Jy ! Clean residual min=-0.024508 max=0.031609 Jy/beam ! Clean residual mean=0.000416 rms=0.007285 Jy/beam ! Combined flux in latest and established models = 0.235319 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.235319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119313Jy sigma=0.000837 ! Fit after self-cal, rms=0.119225Jy sigma=0.000836 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.382 mas, bmaj=10.56 mas, bpa=-5.346 degrees ! Estimated noise=4660.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336216 Jy ! Component: 100 - total flux cleaned = 0.0529019 Jy ! Component: 150 - total flux cleaned = 0.0646604 Jy ! Component: 200 - total flux cleaned = 0.0718941 Jy ! Total flux subtracted in 200 components = 0.0718941 Jy ! Clean residual min=-0.016679 max=0.014901 Jy/beam ! Clean residual mean=0.000141 rms=0.004085 Jy/beam ! Combined flux in latest and established models = 0.307214 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 49 components and 0.307214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108345Jy sigma=0.000770 ! Fit after self-cal, rms=0.108257Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.93 KP 0.97 ! LA 0.98 MK 1.00* NL 0.89 OV 1.00 ! PT 1.00* SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.93 KP 0.91 ! LA 0.94 MK 1.00* NL 0.97 OV 1.07 ! PT 1.00* SC 1.72 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.83 KP 0.96 ! LA 1.04 MK 1.00* NL 1.01 OV 0.85 ! PT 1.00* SC 0.79 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.108257Jy sigma=0.000769 ! Fit after self-cal, rms=0.116583Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.433 mas, bmaj=10.68 mas, bpa=-3.215 degrees ! Estimated noise=4737.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134864 Jy ! Component: 100 - total flux cleaned = -0.00181421 Jy ! Component: 150 - total flux cleaned = -0.001881 Jy ! Component: 200 - total flux cleaned = -0.00200343 Jy ! Total flux subtracted in 200 components = -0.00200343 Jy ! Clean residual min=-0.011770 max=0.010740 Jy/beam ! Clean residual mean=0.000070 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 0.30521 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.30521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116463Jy sigma=0.000679 ! Fit after self-cal, rms=0.116741Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116741Jy sigma=0.000678 ! Fit after self-cal, rms=0.117098Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.431 mas, bmaj=10.69 mas, bpa=-3.088 degrees ! Estimated noise=4725.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134977 Jy ! Component: 100 - total flux cleaned = -0.00151129 Jy ! Component: 150 - total flux cleaned = -0.0015612 Jy ! Component: 200 - total flux cleaned = -0.00160791 Jy ! Total flux subtracted in 200 components = -0.00160791 Jy ! Clean residual min=-0.011735 max=0.010519 Jy/beam ! Clean residual mean=0.000066 rms=0.002754 Jy/beam ! Combined flux in latest and established models = 0.303602 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.303602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117039Jy sigma=0.000678 ! Fit after self-cal, rms=0.117045Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90403e-07 Jy ! Component: 100 - total flux cleaned = -4.49327e-05 Jy ! Component: 150 - total flux cleaned = -1.16202e-06 Jy ! Component: 200 - total flux cleaned = 2.5342e-07 Jy ! Total flux subtracted in 200 components = 2.5342e-07 Jy ! Clean residual min=-0.011704 max=0.010343 Jy/beam ! Clean residual mean=0.000066 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 0.303602 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.303602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117014Jy sigma=0.000678 ! Fit after self-cal, rms=0.117012Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117012Jy sigma=0.000678 ! Fit after self-cal, rms=0.117032Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.43 mas, bmaj=10.7 mas, bpa=-2.959 degrees ! Estimated noise=4716.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0009452 Jy ! Component: 100 - total flux cleaned = -0.00103391 Jy ! Component: 150 - total flux cleaned = -0.00107526 Jy ! Component: 200 - total flux cleaned = -0.00103592 Jy ! Total flux subtracted in 200 components = -0.00103592 Jy ! Clean residual min=-0.011664 max=0.010175 Jy/beam ! Clean residual mean=0.000063 rms=0.002699 Jy/beam ! Combined flux in latest and established models = 0.302566 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.302567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116992Jy sigma=0.000677 ! Fit after self-cal, rms=0.116993Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.05921e-06 Jy ! Component: 100 - total flux cleaned = -4.37592e-05 Jy ! Component: 150 - total flux cleaned = -4.37554e-05 Jy ! Component: 200 - total flux cleaned = -4.42812e-05 Jy ! Total flux subtracted in 200 components = -4.42812e-05 Jy ! Clean residual min=-0.011643 max=0.010030 Jy/beam ! Clean residual mean=0.000062 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.302522 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.302522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116967Jy sigma=0.000677 ! Fit after self-cal, rms=0.116966Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116966Jy sigma=0.000677 ! Fit after self-cal, rms=0.116905Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.867 mas, bmaj=13.21 mas, bpa=-10.24 degrees ! Estimated noise=5609.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183319 Jy ! Component: 100 - total flux cleaned = -0.000277601 Jy ! Component: 150 - total flux cleaned = -0.000351941 Jy ! Component: 200 - total flux cleaned = -0.00037316 Jy ! Total flux subtracted in 200 components = -0.00037316 Jy ! Clean residual min=-0.009621 max=0.008446 Jy/beam ! Clean residual mean=0.000111 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.302149 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.302149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116903Jy sigma=0.000677 ! Fit after self-cal, rms=0.116904Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.67825e-06 Jy ! Component: 100 - total flux cleaned = -8.48771e-07 Jy ! Component: 150 - total flux cleaned = 1.23357e-06 Jy ! Component: 200 - total flux cleaned = 2.01687e-05 Jy ! Total flux subtracted in 200 components = 2.01687e-05 Jy ! Clean residual min=-0.009634 max=0.008415 Jy/beam ! Clean residual mean=0.000111 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.302169 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.302169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116892Jy sigma=0.000677 ! Fit after self-cal, rms=0.116890Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.429 mas, bmaj=10.7 mas, bpa=-2.847 degrees ! Estimated noise=4708.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.429 x 10.7 at -2.847 degrees (North through East) ! Clean map min=-0.011273 max=0.23863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.034 mas, bmaj=9.945 mas, bpa=0.7034 degrees ! Estimated noise=5383.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183539 Jy ! Component: 100 - total flux cleaned = 0.238388 Jy ! Component: 150 - total flux cleaned = 0.265758 Jy ! Component: 200 - total flux cleaned = 0.28082 Jy ! Total flux subtracted in 200 components = 0.28082 Jy ! Clean residual min=-0.014628 max=0.013678 Jy/beam ! Clean residual mean=0.000118 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.28082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.28082 Jy ! Inverting map and beam ! Estimated beam: bmin=4.429 mas, bmaj=10.7 mas, bpa=-2.847 degrees ! Estimated noise=4708.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115812 Jy ! Component: 100 - total flux cleaned = 0.0174716 Jy ! Component: 150 - total flux cleaned = 0.0208023 Jy ! Component: 200 - total flux cleaned = 0.0216099 Jy ! Total flux subtracted in 200 components = 0.0216099 Jy ! Clean residual min=-0.012266 max=0.009445 Jy/beam ! Clean residual mean=0.000061 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 0.302429 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.302429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.867 mas, bmaj=13.21 mas, bpa=-10.24 degrees ! Estimated noise=5609.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526829 Jy ! Component: 100 - total flux cleaned = 0.000585047 Jy ! Component: 150 - total flux cleaned = 0.000584084 Jy ! Component: 200 - total flux cleaned = 0.000633093 Jy ! Total flux subtracted in 200 components = 0.000633093 Jy ! Clean residual min=-0.009867 max=0.009253 Jy/beam ! Clean residual mean=0.000117 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.303063 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.50098e-05 Jy ! Component: 100 - total flux cleaned = 4.64976e-05 Jy ! Component: 150 - total flux cleaned = 4.65634e-05 Jy ! Component: 200 - total flux cleaned = 8.50023e-05 Jy ! Total flux subtracted in 200 components = 8.50023e-05 Jy ! Clean residual min=-0.009750 max=0.009136 Jy/beam ! Clean residual mean=0.000116 rms=0.002760 Jy/beam ! Combined flux in latest and established models = 0.303148 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.303148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.429 mas, bmaj=10.7 mas, bpa=-2.847 degrees ! Estimated noise=4708.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.97077e-05 Jy ! Component: 100 - total flux cleaned = 0.000265806 Jy ! Component: 150 - total flux cleaned = 0.000482821 Jy ! Component: 200 - total flux cleaned = 0.000522181 Jy ! Total flux subtracted in 200 components = 0.000522181 Jy ! Clean residual min=-0.012023 max=0.009355 Jy/beam ! Clean residual mean=0.000059 rms=0.002701 Jy/beam ! Combined flux in latest and established models = 0.30367 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.30367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116874Jy sigma=0.000677 ! Fit after self-cal, rms=0.116873Jy sigma=0.000677 wmodel J1445-1629_S_2017_07_09_pus_map.mod ! Writing 72 model components to file: J1445-1629_S_2017_07_09_pus_map.mod wobs J1445-1629_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_2017_07_09_pus_uvs.fits wwins J1445-1629_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1445-1629_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313494 Jy ! Component: 100 - total flux cleaned = -0.00313659 Jy ! Component: 150 - total flux cleaned = -0.00356815 Jy ! Component: 200 - total flux cleaned = -0.00318135 Jy ! Component: 250 - total flux cleaned = -0.00340914 Jy ! Component: 300 - total flux cleaned = -0.00329819 Jy ! Component: 350 - total flux cleaned = -0.00350543 Jy ! Component: 400 - total flux cleaned = -0.00379967 Jy ! Component: 450 - total flux cleaned = -0.00389298 Jy ! Component: 500 - total flux cleaned = -0.00371159 Jy ! Component: 550 - total flux cleaned = -0.0035359 Jy ! Component: 600 - total flux cleaned = -0.00328447 Jy ! Component: 650 - total flux cleaned = -0.00304176 Jy ! Component: 700 - total flux cleaned = -0.00280681 Jy ! Component: 750 - total flux cleaned = -0.00257761 Jy ! Component: 800 - total flux cleaned = -0.0022817 Jy ! Component: 850 - total flux cleaned = -0.00213721 Jy ! Component: 900 - total flux cleaned = -0.00192587 Jy ! Component: 950 - total flux cleaned = -0.00179008 Jy ! Component: 1000 - total flux cleaned = -0.00165831 Jy ! Component: 1050 - total flux cleaned = -0.00159248 Jy ! Component: 1100 - total flux cleaned = -0.00140125 Jy ! Component: 1150 - total flux cleaned = -0.00152535 Jy ! Component: 1200 - total flux cleaned = -0.00152546 Jy ! Component: 1250 - total flux cleaned = -0.00170593 Jy ! Component: 1300 - total flux cleaned = -0.00170625 Jy ! Component: 1350 - total flux cleaned = -0.00182298 Jy ! Component: 1400 - total flux cleaned = -0.00188052 Jy ! Component: 1450 - total flux cleaned = -0.00193733 Jy ! Component: 1500 - total flux cleaned = -0.00204945 Jy ! Component: 1550 - total flux cleaned = -0.00199391 Jy ! Component: 1600 - total flux cleaned = -0.00193928 Jy ! Component: 1650 - total flux cleaned = -0.00193948 Jy ! Component: 1700 - total flux cleaned = -0.00199329 Jy ! Component: 1750 - total flux cleaned = -0.0019402 Jy ! Component: 1800 - total flux cleaned = -0.0018354 Jy ! Component: 1850 - total flux cleaned = -0.00183549 Jy ! Component: 1900 - total flux cleaned = -0.00188707 Jy ! Component: 1950 - total flux cleaned = -0.00173279 Jy ! Component: 2000 - total flux cleaned = -0.00183528 Jy ! Component: 2050 - total flux cleaned = -0.00193668 Jy ! Component: 2100 - total flux cleaned = -0.00188607 Jy ! Component: 2150 - total flux cleaned = -0.00188594 Jy ! Component: 2200 - total flux cleaned = -0.00193544 Jy ! Component: 2250 - total flux cleaned = -0.00183635 Jy ! Component: 2300 - total flux cleaned = -0.00183649 Jy ! Component: 2350 - total flux cleaned = -0.00183676 Jy ! Component: 2400 - total flux cleaned = -0.00173983 Jy ! Component: 2450 - total flux cleaned = -0.00178813 Jy ! Component: 2500 - total flux cleaned = -0.00178769 Jy ! Component: 2550 - total flux cleaned = -0.00169177 Jy ! Component: 2600 - total flux cleaned = -0.0016922 Jy ! Component: 2650 - total flux cleaned = -0.00150048 Jy ! Component: 2700 - total flux cleaned = -0.00159628 Jy ! Component: 2750 - total flux cleaned = -0.00135743 Jy ! Component: 2800 - total flux cleaned = -0.0012617 Jy ! Component: 2850 - total flux cleaned = -0.00111879 Jy ! Component: 2900 - total flux cleaned = -0.00102355 Jy ! Component: 2950 - total flux cleaned = -0.000880013 Jy ! Component: 3000 - total flux cleaned = -0.00078465 Jy ! Component: 3050 - total flux cleaned = -0.000689282 Jy ! Component: 3100 - total flux cleaned = -0.000497906 Jy ! Component: 3150 - total flux cleaned = -0.000449956 Jy ! Component: 3200 - total flux cleaned = -0.000306134 Jy ! Component: 3250 - total flux cleaned = -0.00016216 Jy ! Component: 3300 - total flux cleaned = -6.58721e-05 Jy ! Component: 3350 - total flux cleaned = 0.000175158 Jy ! Component: 3400 - total flux cleaned = 0.000465051 Jy ! Component: 3450 - total flux cleaned = 0.000707575 Jy ! Component: 3500 - total flux cleaned = 0.00109657 Jy ! Component: 3550 - total flux cleaned = 0.00129174 Jy ! Component: 3600 - total flux cleaned = 0.00163443 Jy ! Component: 3650 - total flux cleaned = 0.00197914 Jy ! Component: 3700 - total flux cleaned = 0.00227595 Jy ! Component: 3750 - total flux cleaned = 0.00247464 Jy ! Component: 3800 - total flux cleaned = 0.00262465 Jy ! Component: 3850 - total flux cleaned = 0.00297651 Jy ! Component: 3900 - total flux cleaned = 0.00333135 Jy ! Component: 3950 - total flux cleaned = 0.00353512 Jy ! Component: 4000 - total flux cleaned = 0.00384252 Jy ! Component: 4050 - total flux cleaned = 0.00420456 Jy ! Total flux subtracted in 4096 components = 0.00436072 Jy ! Clean residual min=-0.003259 max=0.002786 Jy/beam ! Clean residual mean=0.000030 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.30803 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 315 components and 0.30803 Jy ![Exited script file: muppet] wmap "J1445-1629_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.429 x 10.7 at -2.847 degrees (North through East) ! Clean map min=-0.0094874 max=0.2406 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240602 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000901312 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12382 1.12382 2.24764 4.49528 8.99057 17.9811 35.9623 71.9245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.429 x 10.7 at -2.847 degrees (North through East) ! Clean map min=-0.0094874 max=0.2406 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1445-1629_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:44 2019