! Started logfile: J1445-1629_S_2017_06_10_pus_uvs.log on Mon May 6 14:56:33 2019 obs J1445-1629_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1445-1629_S_2017_06_10_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.562963 visibilities/baseline/integration-bin. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-1629_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.739395Jy sigma=0.006744 ! Fit after self-cal, rms=0.726394Jy sigma=0.006623 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=10.56 mas, bpa=7.027 degrees ! Estimated noise=3074.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208321 Jy ! Component: 100 - total flux cleaned = 0.270833 Jy ! Total flux subtracted in 100 components = 0.270833 Jy ! Clean residual min=-0.015910 max=0.027148 Jy/beam ! Clean residual mean=0.000078 rms=0.005766 Jy/beam ! Combined flux in latest and established models = 0.270833 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.270833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092224Jy sigma=0.000819 ! Fit after self-cal, rms=0.092148Jy sigma=0.000819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=11.96 mas, bpa=6.923 degrees ! Estimated noise=2545.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338076 Jy ! Component: 100 - total flux cleaned = 0.0494495 Jy ! Component: 150 - total flux cleaned = 0.0570512 Jy ! Component: 200 - total flux cleaned = 0.0610898 Jy ! Total flux subtracted in 200 components = 0.0610898 Jy ! Clean residual min=-0.008406 max=0.007082 Jy/beam ! Clean residual mean=0.000007 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.331922 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 50 components and 0.331922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079995Jy sigma=0.000713 ! Fit after self-cal, rms=0.079961Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 1.04 ! LA 1.01 MK 1.00* NL 0.85 OV 0.99 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 1.04 ! LA 0.96 MK 1.00* NL 1.08 OV 1.03 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 0.96 ! LA 0.93 MK 1.00* NL 1.04 OV 0.97 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.079961Jy sigma=0.000712 ! Fit after self-cal, rms=0.076961Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=12.07 mas, bpa=7.688 degrees ! Estimated noise=2570.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187757 Jy ! Component: 100 - total flux cleaned = 0.00206275 Jy ! Component: 150 - total flux cleaned = 0.0020998 Jy ! Component: 200 - total flux cleaned = 0.00213205 Jy ! Total flux subtracted in 200 components = 0.00213205 Jy ! Clean residual min=-0.006057 max=0.007002 Jy/beam ! Clean residual mean=-0.000026 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.334054 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.334054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076900Jy sigma=0.000689 ! Fit after self-cal, rms=0.076892Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076892Jy sigma=0.000689 ! Fit after self-cal, rms=0.076875Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.845 mas, bmaj=12.05 mas, bpa=7.646 degrees ! Estimated noise=2571.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130981 Jy ! Component: 100 - total flux cleaned = 0.00148738 Jy ! Component: 150 - total flux cleaned = 0.00148793 Jy ! Component: 200 - total flux cleaned = 0.00150777 Jy ! Total flux subtracted in 200 components = 0.00150777 Jy ! Clean residual min=-0.005999 max=0.007048 Jy/beam ! Clean residual mean=-0.000026 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.335562 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.335562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076849Jy sigma=0.000689 ! Fit after self-cal, rms=0.076843Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.46446e-05 Jy ! Component: 100 - total flux cleaned = 2.45844e-05 Jy ! Component: 150 - total flux cleaned = 2.39679e-05 Jy ! Component: 200 - total flux cleaned = 8.76196e-06 Jy ! Total flux subtracted in 200 components = 8.76196e-06 Jy ! Clean residual min=-0.006030 max=0.007016 Jy/beam ! Clean residual mean=-0.000026 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.335571 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.335571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076836Jy sigma=0.000689 ! Fit after self-cal, rms=0.076833Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076833Jy sigma=0.000689 ! Fit after self-cal, rms=0.076788Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.03 mas, bpa=7.619 degrees ! Estimated noise=2570.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837643 Jy ! Component: 100 - total flux cleaned = 0.000950002 Jy ! Component: 150 - total flux cleaned = 0.000989716 Jy ! Component: 200 - total flux cleaned = 0.00102071 Jy ! Total flux subtracted in 200 components = 0.00102071 Jy ! Clean residual min=-0.005993 max=0.007061 Jy/beam ! Clean residual mean=-0.000026 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.336592 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.336592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076778Jy sigma=0.000689 ! Fit after self-cal, rms=0.076775Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30804e-05 Jy ! Component: 100 - total flux cleaned = 3.27425e-05 Jy ! Component: 150 - total flux cleaned = 2.38063e-05 Jy ! Component: 200 - total flux cleaned = 2.417e-05 Jy ! Total flux subtracted in 200 components = 2.417e-05 Jy ! Clean residual min=-0.005997 max=0.007046 Jy/beam ! Clean residual mean=-0.000026 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.336616 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.336616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076773Jy sigma=0.000689 ! Fit after self-cal, rms=0.076772Jy sigma=0.000689 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076772Jy sigma=0.000689 ! Fit after self-cal, rms=0.076748Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=17.64 mas, bpa=-5.557 degrees ! Estimated noise=3122.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987198 Jy ! Component: 100 - total flux cleaned = 0.000971208 Jy ! Component: 150 - total flux cleaned = 0.000904845 Jy ! Component: 200 - total flux cleaned = 0.000863101 Jy ! Total flux subtracted in 200 components = 0.000863101 Jy ! Clean residual min=-0.008341 max=0.007894 Jy/beam ! Clean residual mean=-0.000045 rms=0.002687 Jy/beam ! Combined flux in latest and established models = 0.337479 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 88 components and 0.337479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076756Jy sigma=0.000689 ! Fit after self-cal, rms=0.076750Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51643e-05 Jy ! Component: 100 - total flux cleaned = -4.90501e-05 Jy ! Component: 150 - total flux cleaned = -7.60895e-05 Jy ! Component: 200 - total flux cleaned = -7.61292e-05 Jy ! Total flux subtracted in 200 components = -7.61292e-05 Jy ! Clean residual min=-0.008373 max=0.007979 Jy/beam ! Clean residual mean=-0.000045 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 0.337403 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 0.337403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076757Jy sigma=0.000689 ! Fit after self-cal, rms=0.076754Jy sigma=0.000689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.02 mas, bpa=7.6 degrees ! Estimated noise=2570.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.02 at 7.6 degrees (North through East) ! Clean map min=-0.0058902 max=0.27476 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=10.75 mas, bpa=8.236 degrees ! Estimated noise=3075.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205973 Jy ! Component: 100 - total flux cleaned = 0.268619 Jy ! Component: 150 - total flux cleaned = 0.298562 Jy ! Component: 200 - total flux cleaned = 0.314212 Jy ! Total flux subtracted in 200 components = 0.314212 Jy ! Clean residual min=-0.008163 max=0.008846 Jy/beam ! Clean residual mean=0.000006 rms=0.002468 Jy/beam ! Combined flux in latest and established models = 0.314212 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.314212 Jy ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.02 mas, bpa=7.6 degrees ! Estimated noise=2570.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110412 Jy ! Component: 100 - total flux cleaned = 0.0165083 Jy ! Component: 150 - total flux cleaned = 0.0195949 Jy ! Component: 200 - total flux cleaned = 0.0213862 Jy ! Total flux subtracted in 200 components = 0.0213862 Jy ! Clean residual min=-0.006079 max=0.007032 Jy/beam ! Clean residual mean=-0.000024 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.335598 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 64 components and 0.335598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=17.64 mas, bpa=-5.557 degrees ! Estimated noise=3122.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174689 Jy ! Component: 100 - total flux cleaned = 0.00184336 Jy ! Component: 150 - total flux cleaned = 0.00191893 Jy ! Component: 200 - total flux cleaned = 0.00197997 Jy ! Total flux subtracted in 200 components = 0.00197997 Jy ! Clean residual min=-0.008301 max=0.008113 Jy/beam ! Clean residual mean=-0.000044 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 0.337578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36884e-05 Jy ! Component: 100 - total flux cleaned = 4.9765e-05 Jy ! Component: 150 - total flux cleaned = 3.65153e-05 Jy ! Component: 200 - total flux cleaned = 2.34349e-05 Jy ! Total flux subtracted in 200 components = 2.34349e-05 Jy ! Clean residual min=-0.008297 max=0.008099 Jy/beam ! Clean residual mean=-0.000044 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.337601 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.337601 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.02 mas, bpa=7.6 degrees ! Estimated noise=2570.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358741 Jy ! Component: 100 - total flux cleaned = -0.0003588 Jy ! Component: 150 - total flux cleaned = -0.000314721 Jy ! Component: 200 - total flux cleaned = -0.0002808 Jy ! Total flux subtracted in 200 components = -0.0002808 Jy ! Clean residual min=-0.005835 max=0.007069 Jy/beam ! Clean residual mean=-0.000025 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.33732 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 93 components and 0.33732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076759Jy sigma=0.000689 ! Fit after self-cal, rms=0.076759Jy sigma=0.000689 wmodel J1445-1629_S_2017_06_10_pus_map.mod ! Writing 93 model components to file: J1445-1629_S_2017_06_10_pus_map.mod wobs J1445-1629_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_2017_06_10_pus_uvs.fits wwins J1445-1629_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1445-1629_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175768 Jy ! Component: 100 - total flux cleaned = 0.0016522 Jy ! Component: 150 - total flux cleaned = 0.00111033 Jy ! Component: 200 - total flux cleaned = 0.000859901 Jy ! Component: 250 - total flux cleaned = 0.000941954 Jy ! Component: 300 - total flux cleaned = 0.000940348 Jy ! Component: 350 - total flux cleaned = 0.000937477 Jy ! Component: 400 - total flux cleaned = 0.000738704 Jy ! Component: 450 - total flux cleaned = 0.000802336 Jy ! Component: 500 - total flux cleaned = 0.000561218 Jy ! Component: 550 - total flux cleaned = 0.00032953 Jy ! Component: 600 - total flux cleaned = 0.000162283 Jy ! Component: 650 - total flux cleaned = 5.51244e-05 Jy ! Component: 700 - total flux cleaned = 5.49595e-05 Jy ! Component: 750 - total flux cleaned = 0.000255904 Jy ! Component: 800 - total flux cleaned = 0.000400824 Jy ! Component: 850 - total flux cleaned = 0.000542743 Jy ! Component: 900 - total flux cleaned = 0.000726205 Jy ! Component: 950 - total flux cleaned = 0.000949434 Jy ! Component: 1000 - total flux cleaned = 0.00121125 Jy ! Component: 1050 - total flux cleaned = 0.00150813 Jy ! Component: 1100 - total flux cleaned = 0.00167309 Jy ! Component: 1150 - total flux cleaned = 0.00191551 Jy ! Component: 1200 - total flux cleaned = 0.00219084 Jy ! Component: 1250 - total flux cleaned = 0.00238404 Jy ! Component: 1300 - total flux cleaned = 0.00253546 Jy ! Component: 1350 - total flux cleaned = 0.00272231 Jy ! Component: 1400 - total flux cleaned = 0.00286971 Jy ! Component: 1450 - total flux cleaned = 0.00305193 Jy ! Component: 1500 - total flux cleaned = 0.00319599 Jy ! Component: 1550 - total flux cleaned = 0.00337448 Jy ! Component: 1600 - total flux cleaned = 0.00351607 Jy ! Component: 1650 - total flux cleaned = 0.00348101 Jy ! Component: 1700 - total flux cleaned = 0.00358547 Jy ! Component: 1750 - total flux cleaned = 0.00365446 Jy ! Component: 1800 - total flux cleaned = 0.00365433 Jy ! Component: 1850 - total flux cleaned = 0.00365415 Jy ! Component: 1900 - total flux cleaned = 0.0036201 Jy ! Component: 1950 - total flux cleaned = 0.0036199 Jy ! Component: 2000 - total flux cleaned = 0.00351809 Jy ! Component: 2050 - total flux cleaned = 0.00348432 Jy ! Component: 2100 - total flux cleaned = 0.00338252 Jy ! Component: 2150 - total flux cleaned = 0.00331451 Jy ! Component: 2200 - total flux cleaned = 0.00334842 Jy ! Component: 2250 - total flux cleaned = 0.00321257 Jy ! Component: 2300 - total flux cleaned = 0.00311041 Jy ! Component: 2350 - total flux cleaned = 0.00300783 Jy ! Component: 2400 - total flux cleaned = 0.00283718 Jy ! Component: 2450 - total flux cleaned = 0.002769 Jy ! Component: 2500 - total flux cleaned = 0.0026315 Jy ! Component: 2550 - total flux cleaned = 0.00252801 Jy ! Component: 2600 - total flux cleaned = 0.00238975 Jy ! Component: 2650 - total flux cleaned = 0.00228586 Jy ! Component: 2700 - total flux cleaned = 0.00218165 Jy ! Component: 2750 - total flux cleaned = 0.00207694 Jy ! Component: 2800 - total flux cleaned = 0.00200695 Jy ! Component: 2850 - total flux cleaned = 0.00183095 Jy ! Component: 2900 - total flux cleaned = 0.00176027 Jy ! Component: 2950 - total flux cleaned = 0.00161823 Jy ! Component: 3000 - total flux cleaned = 0.00158285 Jy ! Component: 3050 - total flux cleaned = 0.00151156 Jy ! Component: 3100 - total flux cleaned = 0.00136799 Jy ! Component: 3150 - total flux cleaned = 0.00133177 Jy ! Component: 3200 - total flux cleaned = 0.00122326 Jy ! Component: 3250 - total flux cleaned = 0.00118689 Jy ! Component: 3300 - total flux cleaned = 0.001187 Jy ! Component: 3350 - total flux cleaned = 0.00111387 Jy ! Component: 3400 - total flux cleaned = 0.000965931 Jy ! Component: 3450 - total flux cleaned = 0.0010401 Jy ! Component: 3500 - total flux cleaned = 0.000890643 Jy ! Component: 3550 - total flux cleaned = 0.000815484 Jy ! Component: 3600 - total flux cleaned = 0.000739927 Jy ! Component: 3650 - total flux cleaned = 0.000701879 Jy ! Component: 3700 - total flux cleaned = 0.000548724 Jy ! Component: 3750 - total flux cleaned = 0.00051016 Jy ! Component: 3800 - total flux cleaned = 0.000510016 Jy ! Component: 3850 - total flux cleaned = 0.000431474 Jy ! Component: 3900 - total flux cleaned = 0.000471156 Jy ! Component: 3950 - total flux cleaned = 0.00039156 Jy ! Component: 4000 - total flux cleaned = 0.000472141 Jy ! Component: 4050 - total flux cleaned = 0.000512516 Jy ! Total flux subtracted in 4096 components = 0.000553298 Jy ! Clean residual min=-0.002264 max=0.002629 Jy/beam ! Clean residual mean=-0.000006 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.337874 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 337 components and 0.337874 Jy ![Exited script file: muppet] wmap "J1445-1629_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.02 at 7.6 degrees (North through East) ! Clean map min=-0.0046618 max=0.27428 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.274285 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000742628 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.812252 0.812252 1.6245 3.24901 6.49802 12.996 25.9921 51.9842 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.274 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.02 at 7.6 degrees (North through East) ! Clean map min=-0.0046618 max=0.27428 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1445-1629_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:56:37 2019