! Started logfile: J1445-1629_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:51:39 2019 obs J1445-1629_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1445-1629_S_2017_05_31_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.0859259 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-1629_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.747853Jy sigma=0.005455 ! Fit after self-cal, rms=0.740159Jy sigma=0.005415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=8.575 mas, bpa=27.94 degrees ! Estimated noise=5755.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211704 Jy ! Component: 100 - total flux cleaned = 0.247158 Jy ! Total flux subtracted in 100 components = 0.247158 Jy ! Clean residual min=-0.021321 max=0.021348 Jy/beam ! Clean residual mean=0.000008 rms=0.009289 Jy/beam ! Combined flux in latest and established models = 0.247158 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.247158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098254Jy sigma=0.000693 ! Fit after self-cal, rms=0.098175Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=9.192 mas, bpa=28.57 degrees ! Estimated noise=5365.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716685 Jy ! Component: 100 - total flux cleaned = 0.00712924 Jy ! Component: 150 - total flux cleaned = 0.0082706 Jy ! Component: 200 - total flux cleaned = 0.012096 Jy ! Total flux subtracted in 200 components = 0.012096 Jy ! Clean residual min=-0.008664 max=0.008730 Jy/beam ! Clean residual mean=-0.000003 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 0.259254 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 70 components and 0.259254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090975Jy sigma=0.000635 ! Fit after self-cal, rms=0.090907Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.00* ! LA 0.97 MK 1.00* NL 0.93 OV 1.00* ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 1.00* ! LA 0.99 MK 1.00* NL 1.01 OV 1.00* ! PT 1.00* SC 1.08 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 1.03 MK 1.00* NL 0.98 OV 1.00* ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.090907Jy sigma=0.000634 ! Fit after self-cal, rms=0.075891Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=9.048 mas, bpa=17.89 degrees ! Estimated noise=6505.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246818 Jy ! Component: 100 - total flux cleaned = 7.04577e-05 Jy ! Component: 150 - total flux cleaned = -0.000510257 Jy ! Component: 200 - total flux cleaned = -0.000673217 Jy ! Total flux subtracted in 200 components = -0.000673217 Jy ! Clean residual min=-0.002743 max=0.002746 Jy/beam ! Clean residual mean=-0.000001 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.258581 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 119 components and 0.258581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074577Jy sigma=0.000597 ! Fit after self-cal, rms=0.074553Jy sigma=0.000596 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074553Jy sigma=0.000596 ! Fit after self-cal, rms=0.074540Jy sigma=0.000596 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.038 mas, bpa=17.8 degrees ! Estimated noise=6511.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254486 Jy ! Component: 100 - total flux cleaned = 0.000159334 Jy ! Component: 150 - total flux cleaned = -0.000522583 Jy ! Component: 200 - total flux cleaned = -0.0020751 Jy ! Total flux subtracted in 200 components = -0.0020751 Jy ! Clean residual min=-0.001256 max=0.001247 Jy/beam ! Clean residual mean=-0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.256506 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 154 components and 0.256506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074317Jy sigma=0.000594 ! Fit after self-cal, rms=0.074307Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024904 Jy ! Component: 100 - total flux cleaned = -0.000361508 Jy ! Component: 150 - total flux cleaned = -0.000208481 Jy ! Component: 200 - total flux cleaned = -0.000354914 Jy ! Total flux subtracted in 200 components = -0.000354914 Jy ! Clean residual min=-0.000813 max=0.000799 Jy/beam ! Clean residual mean=-0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.256151 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 189 components and 0.256151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074239Jy sigma=0.000594 ! Fit after self-cal, rms=0.074237Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074237Jy sigma=0.000594 ! Fit after self-cal, rms=0.074168Jy sigma=0.000594 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.036 mas, bpa=17.75 degrees ! Estimated noise=6508.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128962 Jy ! Component: 100 - total flux cleaned = 0.000171562 Jy ! Component: 150 - total flux cleaned = 9.07443e-05 Jy ! Component: 200 - total flux cleaned = -0.000117561 Jy ! Total flux subtracted in 200 components = -0.000117561 Jy ! Clean residual min=-0.000701 max=0.000708 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.256034 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 214 components and 0.256034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074135Jy sigma=0.000593 ! Fit after self-cal, rms=0.074134Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146775 Jy ! Component: 100 - total flux cleaned = -4.69861e-05 Jy ! Component: 150 - total flux cleaned = -4.71687e-05 Jy ! Component: 200 - total flux cleaned = 6.35611e-05 Jy ! Total flux subtracted in 200 components = 6.35611e-05 Jy ! Clean residual min=-0.000474 max=0.000465 Jy/beam ! Clean residual mean=-0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.256097 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 248 components and 0.256097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074116Jy sigma=0.000593 ! Fit after self-cal, rms=0.074116Jy sigma=0.000593 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074116Jy sigma=0.000593 ! Fit after self-cal, rms=0.074052Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.281 mas, bmaj=9.099 mas, bpa=12.56 degrees ! Estimated noise=7711.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.72459e-08 Jy ! Component: 100 - total flux cleaned = -3.87767e-05 Jy ! Component: 150 - total flux cleaned = -9.89062e-05 Jy ! Component: 200 - total flux cleaned = -0.000141538 Jy ! Total flux subtracted in 200 components = -0.000141538 Jy ! Clean residual min=-0.000355 max=0.000352 Jy/beam ! Clean residual mean=-0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.255956 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 278 components and 0.255956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074042Jy sigma=0.000593 ! Fit after self-cal, rms=0.074044Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.6417e-05 Jy ! Component: 100 - total flux cleaned = -5.47843e-05 Jy ! Component: 150 - total flux cleaned = -5.56511e-05 Jy ! Component: 200 - total flux cleaned = -5.69987e-05 Jy ! Total flux subtracted in 200 components = -5.69987e-05 Jy ! Clean residual min=-0.000395 max=0.000403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.255899 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 298 components and 0.255899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074037Jy sigma=0.000593 ! Fit after self-cal, rms=0.074036Jy sigma=0.000593 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.036 mas, bpa=17.74 degrees ! Estimated noise=6506.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 9.036 at 17.74 degrees (North through East) ! Clean map min=-0.0068677 max=0.23857 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=8.756 mas, bpa=18.34 degrees ! Estimated noise=6941.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213818 Jy ! Component: 100 - total flux cleaned = 0.246934 Jy ! Component: 150 - total flux cleaned = 0.243525 Jy ! Component: 200 - total flux cleaned = 0.247181 Jy ! Total flux subtracted in 200 components = 0.247181 Jy ! Clean residual min=-0.011308 max=0.011304 Jy/beam ! Clean residual mean=0.000006 rms=0.004571 Jy/beam ! Combined flux in latest and established models = 0.24718 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.24718 Jy ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.036 mas, bpa=17.74 degrees ! Estimated noise=6506.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314061 Jy ! Component: 100 - total flux cleaned = -0.00242918 Jy ! Component: 150 - total flux cleaned = -0.00212499 Jy ! Component: 200 - total flux cleaned = -0.00184345 Jy ! Total flux subtracted in 200 components = -0.00184345 Jy ! Clean residual min=-0.004722 max=0.004728 Jy/beam ! Clean residual mean=0.000001 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.245337 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 94 components and 0.245337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.281 mas, bmaj=9.099 mas, bpa=12.56 degrees ! Estimated noise=7711.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111761 Jy ! Component: 100 - total flux cleaned = -0.0025588 Jy ! Component: 150 - total flux cleaned = -0.00301805 Jy ! Component: 200 - total flux cleaned = -0.00378547 Jy ! Total flux subtracted in 200 components = -0.00378547 Jy ! Clean residual min=-0.001402 max=0.001405 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.241552 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000585995 Jy ! Component: 100 - total flux cleaned = -0.00127792 Jy ! Component: 150 - total flux cleaned = -0.00228553 Jy ! Component: 200 - total flux cleaned = -0.00299473 Jy ! Total flux subtracted in 200 components = -0.00299473 Jy ! Clean residual min=-0.001798 max=0.001803 Jy/beam ! Clean residual mean=0.000001 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.238557 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 164 components and 0.238557 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=9.036 mas, bpa=17.74 degrees ! Estimated noise=6506.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219875 Jy ! Component: 100 - total flux cleaned = 0.00300302 Jy ! Component: 150 - total flux cleaned = 0.00284625 Jy ! Component: 200 - total flux cleaned = 0.00274554 Jy ! Total flux subtracted in 200 components = 0.00274554 Jy ! Clean residual min=-0.000834 max=0.000842 Jy/beam ! Clean residual mean=-0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.241302 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 198 components and 0.241302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074046Jy sigma=0.000593 ! Fit after self-cal, rms=0.074039Jy sigma=0.000593 wmodel J1445-1629_S_2017_05_31_pus_map.mod ! Writing 198 model components to file: J1445-1629_S_2017_05_31_pus_map.mod wobs J1445-1629_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_2017_05_31_pus_uvs.fits wwins J1445-1629_S_2017_05_31_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1445-1629_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 9.036 at 17.74 degrees (North through East) ! Clean map min=-0.0060482 max=0.22118 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.221177 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254163 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.344742 0.344742 0.689483 1.37897 2.75793 5.51587 11.0317 22.0635 44.1269 88.2539 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.221 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 9.036 at 17.74 degrees (North through East) ! Clean map min=-0.0060482 max=0.22118 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1445-1629_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:51:42 2019