! Started logfile: J1445-1629_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:26 2019 obs J1445-1629_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1445-1629_S_2017_05_27_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.648413 visibilities/baseline/integration-bin. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-1629_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.741051Jy sigma=0.004472 ! Fit after self-cal, rms=0.723026Jy sigma=0.004375 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=6.449 mas, bpa=0.1056 degrees ! Estimated noise=3136.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219517 Jy ! Component: 100 - total flux cleaned = 0.28605 Jy ! Total flux subtracted in 100 components = 0.28605 Jy ! Clean residual min=-0.017391 max=0.030353 Jy/beam ! Clean residual mean=-0.000193 rms=0.005781 Jy/beam ! Combined flux in latest and established models = 0.28605 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.28605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175805Jy sigma=0.000825 ! Fit after self-cal, rms=0.175749Jy sigma=0.000825 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=7.366 mas, bpa=1.963 degrees ! Estimated noise=2473.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406174 Jy ! Component: 100 - total flux cleaned = 0.0596734 Jy ! Component: 150 - total flux cleaned = 0.0692233 Jy ! Component: 200 - total flux cleaned = 0.074236 Jy ! Total flux subtracted in 200 components = 0.074236 Jy ! Clean residual min=-0.015439 max=0.016475 Jy/beam ! Clean residual mean=-0.000172 rms=0.004133 Jy/beam ! Combined flux in latest and established models = 0.360286 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.360286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166216Jy sigma=0.000757 ! Fit after self-cal, rms=0.166183Jy sigma=0.000757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.84 HN 1.17 KP 1.02 ! LA 0.99 MK 1.03 NL 0.93 OV 1.05 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.12 KP 1.00 ! LA 0.94 MK 0.93 NL 1.13 OV 1.06 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.95 HN 1.04 KP 1.02 ! LA 0.97 MK 1.10 NL 1.12 OV 0.93 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.91 KP 1.00* ! LA 0.88 MK 2.48 NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.166183Jy sigma=0.000757 ! Fit after self-cal, rms=0.146794Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.524 mas, bpa=4.453 degrees ! Estimated noise=2473.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00725236 Jy ! Component: 100 - total flux cleaned = -0.0085198 Jy ! Component: 150 - total flux cleaned = -0.00865646 Jy ! Component: 200 - total flux cleaned = -0.00877882 Jy ! Total flux subtracted in 200 components = -0.00877882 Jy ! Clean residual min=-0.012095 max=0.011689 Jy/beam ! Clean residual mean=-0.000072 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 0.351507 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.351507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146066Jy sigma=0.000711 ! Fit after self-cal, rms=0.146145Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146145Jy sigma=0.000710 ! Fit after self-cal, rms=0.158250Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=7.529 mas, bpa=4.22 degrees ! Estimated noise=2457.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524591 Jy ! Component: 100 - total flux cleaned = -8.78531e-05 Jy ! Component: 150 - total flux cleaned = 0.000211583 Jy ! Component: 200 - total flux cleaned = 0.000365359 Jy ! Total flux subtracted in 200 components = 0.000365359 Jy ! Clean residual min=-0.007258 max=0.006668 Jy/beam ! Clean residual mean=-0.000012 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.351872 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.351872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158152Jy sigma=0.000675 ! Fit after self-cal, rms=0.158401Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359032 Jy ! Component: 100 - total flux cleaned = -0.00012413 Jy ! Component: 150 - total flux cleaned = -3.36387e-06 Jy ! Component: 200 - total flux cleaned = 3.3788e-05 Jy ! Total flux subtracted in 200 components = 3.3788e-05 Jy ! Clean residual min=-0.007270 max=0.006630 Jy/beam ! Clean residual mean=-0.000011 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.351906 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.351906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158362Jy sigma=0.000675 ! Fit after self-cal, rms=0.158352Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158352Jy sigma=0.000675 ! Fit after self-cal, rms=0.159773Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=7.538 mas, bpa=4.099 degrees ! Estimated noise=2466.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218014 Jy ! Component: 100 - total flux cleaned = 9.97237e-05 Jy ! Component: 150 - total flux cleaned = 0.000304739 Jy ! Component: 200 - total flux cleaned = 0.000375439 Jy ! Total flux subtracted in 200 components = 0.000375439 Jy ! Clean residual min=-0.007292 max=0.006565 Jy/beam ! Clean residual mean=-0.000013 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.352282 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.352282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159720Jy sigma=0.000674 ! Fit after self-cal, rms=0.159718Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242364 Jy ! Component: 100 - total flux cleaned = -0.000112349 Jy ! Component: 150 - total flux cleaned = -8.37166e-05 Jy ! Component: 200 - total flux cleaned = -5.752e-05 Jy ! Total flux subtracted in 200 components = -5.752e-05 Jy ! Clean residual min=-0.007292 max=0.006579 Jy/beam ! Clean residual mean=-0.000013 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.352224 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.352224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159697Jy sigma=0.000674 ! Fit after self-cal, rms=0.159694Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159694Jy sigma=0.000674 ! Fit after self-cal, rms=0.160302Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.376 mas, bmaj=13.81 mas, bpa=1.34 degrees ! Estimated noise=2911.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115821 Jy ! Component: 100 - total flux cleaned = 0.000305736 Jy ! Component: 150 - total flux cleaned = 0.000438703 Jy ! Component: 200 - total flux cleaned = 0.000531909 Jy ! Total flux subtracted in 200 components = 0.000531909 Jy ! Clean residual min=-0.006777 max=0.006577 Jy/beam ! Clean residual mean=-0.000031 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 0.352756 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 54 components and 0.352756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160336Jy sigma=0.000674 ! Fit after self-cal, rms=0.160287Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.73104e-05 Jy ! Component: 100 - total flux cleaned = 0.000175831 Jy ! Component: 150 - total flux cleaned = 0.000251218 Jy ! Component: 200 - total flux cleaned = 0.000278634 Jy ! Total flux subtracted in 200 components = 0.000278634 Jy ! Clean residual min=-0.006761 max=0.006468 Jy/beam ! Clean residual mean=-0.000030 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.353035 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.353035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160312Jy sigma=0.000674 ! Fit after self-cal, rms=0.160286Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.542 mas, bpa=3.975 degrees ! Estimated noise=2471.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.746 x 7.542 at 3.975 degrees (North through East) ! Clean map min=-0.0069721 max=0.29541 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=6.6 mas, bpa=2.803 degrees ! Estimated noise=3158.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22164 Jy ! Component: 100 - total flux cleaned = 0.28866 Jy ! Component: 150 - total flux cleaned = 0.321303 Jy ! Component: 200 - total flux cleaned = 0.338693 Jy ! Total flux subtracted in 200 components = 0.338693 Jy ! Clean residual min=-0.009562 max=0.009554 Jy/beam ! Clean residual mean=-0.000031 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.338693 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.338693 Jy ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.542 mas, bpa=3.975 degrees ! Estimated noise=2471.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981383 Jy ! Component: 100 - total flux cleaned = 0.0120427 Jy ! Component: 150 - total flux cleaned = 0.0129995 Jy ! Component: 200 - total flux cleaned = 0.0136256 Jy ! Total flux subtracted in 200 components = 0.0136256 Jy ! Clean residual min=-0.007382 max=0.006637 Jy/beam ! Clean residual mean=-0.000015 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.352319 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.352319 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.376 mas, bmaj=13.81 mas, bpa=1.34 degrees ! Estimated noise=2911.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199339 Jy ! Component: 100 - total flux cleaned = 0.00175117 Jy ! Component: 150 - total flux cleaned = 0.0016436 Jy ! Component: 200 - total flux cleaned = 0.00160488 Jy ! Total flux subtracted in 200 components = 0.00160488 Jy ! Clean residual min=-0.006754 max=0.006418 Jy/beam ! Clean residual mean=-0.000027 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.353924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86219e-05 Jy ! Component: 100 - total flux cleaned = -0.000106155 Jy ! Component: 150 - total flux cleaned = -0.000149282 Jy ! Component: 200 - total flux cleaned = -0.000189019 Jy ! Total flux subtracted in 200 components = -0.000189019 Jy ! Clean residual min=-0.006776 max=0.006370 Jy/beam ! Clean residual mean=-0.000028 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.353735 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.353735 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.542 mas, bpa=3.975 degrees ! Estimated noise=2471.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323383 Jy ! Component: 100 - total flux cleaned = -0.000408117 Jy ! Component: 150 - total flux cleaned = -0.000335292 Jy ! Component: 200 - total flux cleaned = -0.000391296 Jy ! Total flux subtracted in 200 components = -0.000391296 Jy ! Clean residual min=-0.007414 max=0.006428 Jy/beam ! Clean residual mean=-0.000011 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.353343 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.353343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160365Jy sigma=0.000674 ! Fit after self-cal, rms=0.160318Jy sigma=0.000674 wmodel J1445-1629_S_2017_05_27_pus_map.mod ! Writing 46 model components to file: J1445-1629_S_2017_05_27_pus_map.mod wobs J1445-1629_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_2017_05_27_pus_uvs.fits wwins J1445-1629_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1445-1629_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257915 Jy ! Component: 100 - total flux cleaned = -0.00313858 Jy ! Component: 150 - total flux cleaned = -0.0037615 Jy ! Component: 200 - total flux cleaned = -0.00464273 Jy ! Component: 250 - total flux cleaned = -0.00492606 Jy ! Component: 300 - total flux cleaned = -0.00501571 Jy ! Component: 350 - total flux cleaned = -0.00510248 Jy ! Component: 400 - total flux cleaned = -0.00493769 Jy ! Component: 450 - total flux cleaned = -0.00485751 Jy ! Component: 500 - total flux cleaned = -0.0044634 Jy ! Component: 550 - total flux cleaned = -0.00423451 Jy ! Component: 600 - total flux cleaned = -0.00423575 Jy ! Component: 650 - total flux cleaned = -0.00387219 Jy ! Component: 700 - total flux cleaned = -0.00358867 Jy ! Component: 750 - total flux cleaned = -0.00345001 Jy ! Component: 800 - total flux cleaned = -0.00290422 Jy ! Component: 850 - total flux cleaned = -0.00270564 Jy ! Component: 900 - total flux cleaned = -0.00257531 Jy ! Component: 950 - total flux cleaned = -0.00238349 Jy ! Component: 1000 - total flux cleaned = -0.00225816 Jy ! Component: 1050 - total flux cleaned = -0.00219722 Jy ! Component: 1100 - total flux cleaned = -0.00189224 Jy ! Component: 1150 - total flux cleaned = -0.00177282 Jy ! Component: 1200 - total flux cleaned = -0.00147659 Jy ! Component: 1250 - total flux cleaned = -0.0013013 Jy ! Component: 1300 - total flux cleaned = -0.000956619 Jy ! Component: 1350 - total flux cleaned = -0.000843548 Jy ! Component: 1400 - total flux cleaned = -0.00061924 Jy ! Component: 1450 - total flux cleaned = -0.000342297 Jy ! Component: 1500 - total flux cleaned = -0.000177866 Jy ! Component: 1550 - total flux cleaned = -1.61051e-05 Jy ! Component: 1600 - total flux cleaned = 0.000303661 Jy ! Component: 1650 - total flux cleaned = 0.000566618 Jy ! Component: 1700 - total flux cleaned = 0.000670936 Jy ! Component: 1750 - total flux cleaned = 0.000928066 Jy ! Component: 1800 - total flux cleaned = 0.00113165 Jy ! Component: 1850 - total flux cleaned = 0.00123227 Jy ! Component: 1900 - total flux cleaned = 0.00143117 Jy ! Component: 1950 - total flux cleaned = 0.00157881 Jy ! Component: 2000 - total flux cleaned = 0.00172415 Jy ! Component: 2050 - total flux cleaned = 0.00196356 Jy ! Component: 2100 - total flux cleaned = 0.00205838 Jy ! Component: 2150 - total flux cleaned = 0.00210597 Jy ! Component: 2200 - total flux cleaned = 0.00224582 Jy ! Component: 2250 - total flux cleaned = 0.00247648 Jy ! Component: 2300 - total flux cleaned = 0.00270409 Jy ! Component: 2350 - total flux cleaned = 0.00288476 Jy ! Component: 2400 - total flux cleaned = 0.00315249 Jy ! Component: 2450 - total flux cleaned = 0.00341737 Jy ! Component: 2500 - total flux cleaned = 0.00359253 Jy ! Component: 2550 - total flux cleaned = 0.00376563 Jy ! Component: 2600 - total flux cleaned = 0.00385216 Jy ! Component: 2650 - total flux cleaned = 0.00423554 Jy ! Component: 2700 - total flux cleaned = 0.00440449 Jy ! Component: 2750 - total flux cleaned = 0.00478112 Jy ! Component: 2800 - total flux cleaned = 0.0051537 Jy ! Component: 2850 - total flux cleaned = 0.00544126 Jy ! Component: 2900 - total flux cleaned = 0.00560431 Jy ! Component: 2950 - total flux cleaned = 0.00604909 Jy ! Component: 3000 - total flux cleaned = 0.00640917 Jy ! Component: 3050 - total flux cleaned = 0.00660781 Jy ! Component: 3100 - total flux cleaned = 0.00692315 Jy ! Component: 3150 - total flux cleaned = 0.00731401 Jy ! Component: 3200 - total flux cleaned = 0.00750778 Jy ! Component: 3250 - total flux cleaned = 0.00781595 Jy ! Component: 3300 - total flux cleaned = 0.00804577 Jy ! Component: 3350 - total flux cleaned = 0.0085012 Jy ! Component: 3400 - total flux cleaned = 0.00868939 Jy ! Component: 3450 - total flux cleaned = 0.00902641 Jy ! Component: 3500 - total flux cleaned = 0.00932398 Jy ! Component: 3550 - total flux cleaned = 0.00958284 Jy ! Component: 3600 - total flux cleaned = 0.00983941 Jy ! Component: 3650 - total flux cleaned = 0.0102764 Jy ! Component: 3700 - total flux cleaned = 0.0104931 Jy ! Component: 3750 - total flux cleaned = 0.0107443 Jy ! Component: 3800 - total flux cleaned = 0.0109585 Jy ! Component: 3850 - total flux cleaned = 0.0113484 Jy ! Component: 3900 - total flux cleaned = 0.0115595 Jy ! Component: 3950 - total flux cleaned = 0.0118394 Jy ! Component: 4000 - total flux cleaned = 0.0121521 Jy ! Component: 4050 - total flux cleaned = 0.0123247 Jy ! Total flux subtracted in 4096 components = 0.0125994 Jy ! Clean residual min=-0.002331 max=0.002129 Jy/beam ! Clean residual mean=0.000005 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.365943 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 301 components and 0.365943 Jy ![Exited script file: muppet] wmap "J1445-1629_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.746 x 7.542 at 3.975 degrees (North through East) ! Clean map min=-0.0047476 max=0.29359 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.293592 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000603069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616233 0.616233 1.23247 2.46493 4.92986 9.85972 19.7194 39.4389 78.8778 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.293 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.746 x 7.542 at 3.975 degrees (North through East) ! Clean map min=-0.0047476 max=0.29359 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1445-1629_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:30 2019