! Started logfile: J1444-0859_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:09 2019 obs J1444-0859_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1444-0859_S_2017_10_21_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.953296 visibilities/baseline/integration-bin. ! Found source: J1444-0859 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 40496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1444-0859_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 913 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1195 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968086Jy sigma=0.007916 ! Fit after self-cal, rms=0.918088Jy sigma=0.007519 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=13.81 mas, bpa=-19.37 degrees ! Estimated noise=1132.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621583 Jy ! Component: 100 - total flux cleaned = 0.0764003 Jy ! Total flux subtracted in 100 components = 0.0764003 Jy ! Clean residual min=-0.005568 max=0.005805 Jy/beam ! Clean residual mean=0.000005 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.0764003 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0764003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107444Jy sigma=0.000780 ! Fit after self-cal, rms=0.107138Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=17.17 mas, bpa=-18.91 degrees ! Estimated noise=548.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111728 Jy ! Component: 100 - total flux cleaned = 0.0166175 Jy ! Component: 150 - total flux cleaned = 0.0202703 Jy ! Component: 200 - total flux cleaned = 0.0228136 Jy ! Total flux subtracted in 200 components = 0.0228136 Jy ! Clean residual min=-0.003675 max=0.003158 Jy/beam ! Clean residual mean=0.000020 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0992139 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 73 components and 0.0992139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105906Jy sigma=0.000767 ! Fit after self-cal, rms=0.105885Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 180 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.90 HN 1.00 KP 1.17 ! LA 1.03 MK 1.11 NL 0.92 OV 1.05 ! PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.05 KP 1.04 ! LA 0.99 MK 1.02 NL 1.05 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.03 HN 1.04 KP 1.05 ! LA 0.78 MK 1.03 NL 1.18 OV 0.94 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.93 KP 1.00* ! LA 0.84 MK 1.11 NL 1.00* OV 1.00* ! PT 0.82 ! ! ! Fit before self-cal, rms=0.105885Jy sigma=0.000767 ! Fit after self-cal, rms=0.104518Jy sigma=0.000763 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=17.84 mas, bpa=-18.8 degrees ! Estimated noise=548.714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000899101 Jy ! Component: 100 - total flux cleaned = -0.000969428 Jy ! Component: 150 - total flux cleaned = -0.00100804 Jy ! Component: 200 - total flux cleaned = -0.00107735 Jy ! Total flux subtracted in 200 components = -0.00107735 Jy ! Clean residual min=-0.002157 max=0.002057 Jy/beam ! Clean residual mean=0.000009 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0981366 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.0981366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104503Jy sigma=0.000762 ! Fit after self-cal, rms=0.104677Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104677Jy sigma=0.000762 ! Fit after self-cal, rms=0.227149Jy sigma=0.000743 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.693 mas, bmaj=18.01 mas, bpa=-18.78 degrees ! Estimated noise=554.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.68654e-05 Jy ! Component: 100 - total flux cleaned = -0.00035992 Jy ! Component: 150 - total flux cleaned = -0.000586245 Jy ! Component: 200 - total flux cleaned = -0.000824687 Jy ! Total flux subtracted in 200 components = -0.000824687 Jy ! Clean residual min=-0.001496 max=0.001577 Jy/beam ! Clean residual mean=0.000002 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0973119 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.0973119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227065Jy sigma=0.000743 ! Fit after self-cal, rms=0.228746Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390068 Jy ! Component: 100 - total flux cleaned = -0.00049965 Jy ! Component: 150 - total flux cleaned = -0.000526018 Jy ! Component: 200 - total flux cleaned = -0.000525942 Jy ! Total flux subtracted in 200 components = -0.000525942 Jy ! Clean residual min=-0.001514 max=0.001427 Jy/beam ! Clean residual mean=0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0967859 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.0967859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228739Jy sigma=0.000740 ! Fit after self-cal, rms=0.228734Jy sigma=0.000740 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228734Jy sigma=0.000740 ! Fit after self-cal, rms=0.252883Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=18.06 mas, bpa=-18.69 degrees ! Estimated noise=558.052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140398 Jy ! Component: 100 - total flux cleaned = -0.000357829 Jy ! Component: 150 - total flux cleaned = -0.000516931 Jy ! Component: 200 - total flux cleaned = -0.000666704 Jy ! Total flux subtracted in 200 components = -0.000666704 Jy ! Clean residual min=-0.001464 max=0.001495 Jy/beam ! Clean residual mean=0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0961192 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.0961192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252844Jy sigma=0.000739 ! Fit after self-cal, rms=0.252886Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.31691e-05 Jy ! Component: 100 - total flux cleaned = -0.000109729 Jy ! Component: 150 - total flux cleaned = -0.000133727 Jy ! Component: 200 - total flux cleaned = -0.00013341 Jy ! Total flux subtracted in 200 components = -0.00013341 Jy ! Clean residual min=-0.001448 max=0.001444 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0959858 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 117 components and 0.0959858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252873Jy sigma=0.000739 ! Fit after self-cal, rms=0.252870Jy sigma=0.000739 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252870Jy sigma=0.000739 ! Fit after self-cal, rms=0.306306Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.298 mas, bmaj=20.73 mas, bpa=-14.09 degrees ! Estimated noise=653.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000352473 Jy ! Component: 100 - total flux cleaned = -0.000429985 Jy ! Component: 150 - total flux cleaned = -0.000494713 Jy ! Component: 200 - total flux cleaned = -0.000547438 Jy ! Total flux subtracted in 200 components = -0.000547438 Jy ! Clean residual min=-0.001493 max=0.001504 Jy/beam ! Clean residual mean=0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0954384 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 123 components and 0.0954384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306287Jy sigma=0.000739 ! Fit after self-cal, rms=0.306317Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.4984e-05 Jy ! Component: 100 - total flux cleaned = -6.40221e-05 Jy ! Component: 150 - total flux cleaned = -7.15617e-05 Jy ! Component: 200 - total flux cleaned = -7.83311e-05 Jy ! Total flux subtracted in 200 components = -7.83311e-05 Jy ! Clean residual min=-0.001506 max=0.001494 Jy/beam ! Clean residual mean=0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.09536 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 126 components and 0.09536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306312Jy sigma=0.000739 ! Fit after self-cal, rms=0.306310Jy sigma=0.000739 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.13 mas, bpa=-18.61 degrees ! Estimated noise=561.333 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.729 x 18.13 at -18.61 degrees (North through East) ! Clean map min=-0.0014349 max=0.088217 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=14.58 mas, bpa=-19.16 degrees ! Estimated noise=1247.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670659 Jy ! Component: 100 - total flux cleaned = 0.0817548 Jy ! Component: 150 - total flux cleaned = 0.0857576 Jy ! Component: 200 - total flux cleaned = 0.0872238 Jy ! Total flux subtracted in 200 components = 0.0872238 Jy ! Clean residual min=-0.004537 max=0.004851 Jy/beam ! Clean residual mean=-0.000001 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.0872238 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0872238 Jy ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.13 mas, bpa=-18.61 degrees ! Estimated noise=561.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413401 Jy ! Component: 100 - total flux cleaned = 0.00598853 Jy ! Component: 150 - total flux cleaned = 0.00702224 Jy ! Component: 200 - total flux cleaned = 0.00739818 Jy ! Total flux subtracted in 200 components = 0.00739818 Jy ! Clean residual min=-0.001548 max=0.001513 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.094622 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 0.094622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.298 mas, bmaj=20.73 mas, bpa=-14.09 degrees ! Estimated noise=653.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583134 Jy ! Component: 100 - total flux cleaned = 0.000680177 Jy ! Component: 150 - total flux cleaned = 0.000680174 Jy ! Component: 200 - total flux cleaned = 0.000691249 Jy ! Total flux subtracted in 200 components = 0.000691249 Jy ! Clean residual min=-0.001522 max=0.001407 Jy/beam ! Clean residual mean=0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0953132 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.91384e-07 Jy ! Component: 100 - total flux cleaned = 1.00673e-05 Jy ! Component: 150 - total flux cleaned = 9.81617e-06 Jy ! Component: 200 - total flux cleaned = 1.90201e-05 Jy ! Total flux subtracted in 200 components = 1.90201e-05 Jy ! Clean residual min=-0.001512 max=0.001423 Jy/beam ! Clean residual mean=0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0953322 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.0953322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.13 mas, bpa=-18.61 degrees ! Estimated noise=561.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142134 Jy ! Component: 100 - total flux cleaned = -0.000180424 Jy ! Component: 150 - total flux cleaned = -0.000179762 Jy ! Component: 200 - total flux cleaned = -0.000179634 Jy ! Total flux subtracted in 200 components = -0.000179634 Jy ! Clean residual min=-0.001526 max=0.001491 Jy/beam ! Clean residual mean=0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0951526 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 0.0951526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306253Jy sigma=0.000739 ! Fit after self-cal, rms=0.306239Jy sigma=0.000739 wmodel J1444-0859_S_2017_10_21_pus_map.mod ! Writing 97 model components to file: J1444-0859_S_2017_10_21_pus_map.mod wobs J1444-0859_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1444-0859_S_2017_10_21_pus_uvs.fits wwins J1444-0859_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1444-0859_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107277 Jy ! Component: 100 - total flux cleaned = 0.000235169 Jy ! Component: 150 - total flux cleaned = 0.000235623 Jy ! Component: 200 - total flux cleaned = 0.000234884 Jy ! Component: 250 - total flux cleaned = 0.000323859 Jy ! Component: 300 - total flux cleaned = 0.000345162 Jy ! Component: 350 - total flux cleaned = 0.000430082 Jy ! Component: 400 - total flux cleaned = 0.000533834 Jy ! Component: 450 - total flux cleaned = 0.000614977 Jy ! Component: 500 - total flux cleaned = 0.00071432 Jy ! Component: 550 - total flux cleaned = 0.000772555 Jy ! Component: 600 - total flux cleaned = 0.000829417 Jy ! Component: 650 - total flux cleaned = 0.000922522 Jy ! Component: 700 - total flux cleaned = 0.00103243 Jy ! Component: 750 - total flux cleaned = 0.00106835 Jy ! Component: 800 - total flux cleaned = 0.00115757 Jy ! Component: 850 - total flux cleaned = 0.00131501 Jy ! Component: 900 - total flux cleaned = 0.00138385 Jy ! Component: 950 - total flux cleaned = 0.00148602 Jy ! Component: 1000 - total flux cleaned = 0.00157013 Jy ! Component: 1050 - total flux cleaned = 0.00166978 Jy ! Component: 1100 - total flux cleaned = 0.00176794 Jy ! Component: 1150 - total flux cleaned = 0.0018487 Jy ! Component: 1200 - total flux cleaned = 0.00197626 Jy ! Component: 1250 - total flux cleaned = 0.00202356 Jy ! Component: 1300 - total flux cleaned = 0.00216433 Jy ! Component: 1350 - total flux cleaned = 0.00219537 Jy ! Component: 1400 - total flux cleaned = 0.00230271 Jy ! Component: 1450 - total flux cleaned = 0.00236341 Jy ! Component: 1500 - total flux cleaned = 0.00240864 Jy ! Component: 1550 - total flux cleaned = 0.00246829 Jy ! Component: 1600 - total flux cleaned = 0.00254199 Jy ! Component: 1650 - total flux cleaned = 0.00257116 Jy ! Component: 1700 - total flux cleaned = 0.0026149 Jy ! Component: 1750 - total flux cleaned = 0.00270118 Jy ! Component: 1800 - total flux cleaned = 0.00278658 Jy ! Component: 1850 - total flux cleaned = 0.00287118 Jy ! Component: 1900 - total flux cleaned = 0.00292722 Jy ! Component: 1950 - total flux cleaned = 0.00299682 Jy ! Component: 2000 - total flux cleaned = 0.00306571 Jy ! Component: 2050 - total flux cleaned = 0.00312035 Jy ! Component: 2100 - total flux cleaned = 0.0032155 Jy ! Component: 2150 - total flux cleaned = 0.00330977 Jy ! Component: 2200 - total flux cleaned = 0.00333667 Jy ! Component: 2250 - total flux cleaned = 0.00341626 Jy ! Component: 2300 - total flux cleaned = 0.00345578 Jy ! Component: 2350 - total flux cleaned = 0.00348214 Jy ! Component: 2400 - total flux cleaned = 0.00361204 Jy ! Component: 2450 - total flux cleaned = 0.00366354 Jy ! Component: 2500 - total flux cleaned = 0.00372756 Jy ! Component: 2550 - total flux cleaned = 0.00380398 Jy ! Component: 2600 - total flux cleaned = 0.00385464 Jy ! Component: 2650 - total flux cleaned = 0.00393013 Jy ! Component: 2700 - total flux cleaned = 0.00399273 Jy ! Component: 2750 - total flux cleaned = 0.00407983 Jy ! Component: 2800 - total flux cleaned = 0.00411695 Jy ! Component: 2850 - total flux cleaned = 0.00420315 Jy ! Component: 2900 - total flux cleaned = 0.00422764 Jy ! Component: 2950 - total flux cleaned = 0.00433716 Jy ! Component: 3000 - total flux cleaned = 0.00436127 Jy ! Component: 3050 - total flux cleaned = 0.00442165 Jy ! Component: 3100 - total flux cleaned = 0.00446964 Jy ! Component: 3150 - total flux cleaned = 0.00456507 Jy ! Component: 3200 - total flux cleaned = 0.00455326 Jy ! Component: 3250 - total flux cleaned = 0.00465959 Jy ! Component: 3300 - total flux cleaned = 0.00473003 Jy ! Component: 3350 - total flux cleaned = 0.0047885 Jy ! Component: 3400 - total flux cleaned = 0.00485825 Jy ! Component: 3450 - total flux cleaned = 0.00489296 Jy ! Component: 3500 - total flux cleaned = 0.00498522 Jy ! Component: 3550 - total flux cleaned = 0.00504251 Jy ! Component: 3600 - total flux cleaned = 0.00508826 Jy ! Component: 3650 - total flux cleaned = 0.00516783 Jy ! Component: 3700 - total flux cleaned = 0.00519045 Jy ! Component: 3750 - total flux cleaned = 0.00528053 Jy ! Component: 3800 - total flux cleaned = 0.00530298 Jy ! Component: 3850 - total flux cleaned = 0.00533643 Jy ! Component: 3900 - total flux cleaned = 0.0053476 Jy ! Component: 3950 - total flux cleaned = 0.00538099 Jy ! Component: 4000 - total flux cleaned = 0.00539213 Jy ! Component: 4050 - total flux cleaned = 0.00542523 Jy ! Total flux subtracted in 4096 components = 0.00544725 Jy ! Clean residual min=-0.000685 max=0.000621 Jy/beam ! Clean residual mean=-0.000000 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.1006 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 332 components and 0.1006 Jy ![Exited script file: muppet] wmap "J1444-0859_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.729 x 18.13 at -18.61 degrees (North through East) ! Clean map min=-0.0014054 max=0.088404 Jy/beam ! Writing clean map to FITS file: J1444-0859_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0884039 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205884 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.698671 0.698671 1.39734 2.79468 5.58937 11.1787 22.3575 44.7149 89.4299 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.729 x 18.13 at -18.61 degrees (North through East) ! Clean map min=-0.0014054 max=0.088404 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1444-0859_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:14 2019