! Started logfile: J1444+1131_S_2017_07_16_pus_uvs.log on Thu May 9 11:11:33 2019 obs J1444+1131_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1444+1131_S_2017_07_16_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.679613 visibilities/baseline/integration-bin. ! Found source: J1444+1131 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 26668 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1444+1131_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 480 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1802 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986137Jy sigma=0.008635 ! Fit after self-cal, rms=0.953560Jy sigma=0.008391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=6.755 mas, bpa=4.383 degrees ! Estimated noise=908.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381939 Jy ! Component: 100 - total flux cleaned = 0.0467838 Jy ! Total flux subtracted in 100 components = 0.0467838 Jy ! Clean residual min=-0.003298 max=0.003721 Jy/beam ! Clean residual mean=0.000001 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0467838 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0467838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078867Jy sigma=0.000645 ! Fit after self-cal, rms=0.078162Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.627 mas, bpa=4.932 degrees ! Estimated noise=599.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386944 Jy ! Component: 100 - total flux cleaned = 0.00567662 Jy ! Component: 150 - total flux cleaned = 0.00616739 Jy ! Component: 200 - total flux cleaned = 0.00627494 Jy ! Total flux subtracted in 200 components = 0.00627494 Jy ! Clean residual min=-0.002187 max=0.002276 Jy/beam ! Clean residual mean=-0.000000 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0530587 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.0530587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077947Jy sigma=0.000638 ! Fit after self-cal, rms=0.077918Jy sigma=0.000638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00 KP 1.02 ! LA 1.03 MK 1.05 NL 0.88 OV 1.03 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.07 KP 1.00 ! LA 0.96 MK 1.05 NL 1.00 OV 1.04 ! PT 1.12 SC 1.12 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 0.97 KP 0.92 ! LA 0.99 MK 1.06 NL 1.04 OV 1.01 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 4. ! A total of 378 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.077918Jy sigma=0.000638 ! Fit after self-cal, rms=0.077264Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=7.61 mas, bpa=5.648 degrees ! Estimated noise=608.634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577896 Jy ! Component: 100 - total flux cleaned = 0.000672767 Jy ! Component: 150 - total flux cleaned = 0.000727631 Jy ! Component: 200 - total flux cleaned = 0.000743601 Jy ! Total flux subtracted in 200 components = 0.000743601 Jy ! Clean residual min=-0.001870 max=0.002078 Jy/beam ! Clean residual mean=0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0538023 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0538023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077251Jy sigma=0.000639 ! Fit after self-cal, rms=0.077233Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077233Jy sigma=0.000639 ! Fit after self-cal, rms=0.076533Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.636 mas, bpa=5.552 degrees ! Estimated noise=609.415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027529 Jy ! Component: 100 - total flux cleaned = 0.000257336 Jy ! Component: 150 - total flux cleaned = 0.000256285 Jy ! Component: 200 - total flux cleaned = 0.000270763 Jy ! Total flux subtracted in 200 components = 0.000270763 Jy ! Clean residual min=-0.001597 max=0.001437 Jy/beam ! Clean residual mean=0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0540731 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0540731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076526Jy sigma=0.000637 ! Fit after self-cal, rms=0.076512Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.76483e-06 Jy ! Component: 100 - total flux cleaned = -2.77232e-05 Jy ! Component: 150 - total flux cleaned = -4.19301e-05 Jy ! Component: 200 - total flux cleaned = -4.19418e-05 Jy ! Total flux subtracted in 200 components = -4.19418e-05 Jy ! Clean residual min=-0.001682 max=0.001426 Jy/beam ! Clean residual mean=0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0540311 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0540311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076506Jy sigma=0.000637 ! Fit after self-cal, rms=0.076498Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076498Jy sigma=0.000637 ! Fit after self-cal, rms=0.076568Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.632 mas, bpa=5.517 degrees ! Estimated noise=607.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125516 Jy ! Component: 100 - total flux cleaned = 9.10651e-05 Jy ! Component: 150 - total flux cleaned = 9.09426e-05 Jy ! Component: 200 - total flux cleaned = 7.78789e-05 Jy ! Total flux subtracted in 200 components = 7.78789e-05 Jy ! Clean residual min=-0.001515 max=0.001417 Jy/beam ! Clean residual mean=0.000000 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.054109 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.054109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076563Jy sigma=0.000637 ! Fit after self-cal, rms=0.076580Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.61574e-05 Jy ! Component: 100 - total flux cleaned = 2.6502e-05 Jy ! Component: 150 - total flux cleaned = 3.82982e-05 Jy ! Component: 200 - total flux cleaned = 3.81926e-05 Jy ! Total flux subtracted in 200 components = 3.81926e-05 Jy ! Clean residual min=-0.001525 max=0.001388 Jy/beam ! Clean residual mean=0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0541472 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0541472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076576Jy sigma=0.000637 ! Fit after self-cal, rms=0.076574Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076574Jy sigma=0.000637 ! Fit after self-cal, rms=0.076561Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.627 mas, bmaj=11.1 mas, bpa=-5.052 degrees ! Estimated noise=773.321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73855e-05 Jy ! Component: 100 - total flux cleaned = -3.16276e-05 Jy ! Component: 150 - total flux cleaned = -7.01176e-05 Jy ! Component: 200 - total flux cleaned = -9.0945e-05 Jy ! Total flux subtracted in 200 components = -9.0945e-05 Jy ! Clean residual min=-0.001922 max=0.001626 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0540563 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0540563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076562Jy sigma=0.000637 ! Fit after self-cal, rms=0.076566Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.35403e-05 Jy ! Component: 100 - total flux cleaned = -8.04435e-05 Jy ! Component: 150 - total flux cleaned = -0.000106354 Jy ! Component: 200 - total flux cleaned = -0.000113191 Jy ! Total flux subtracted in 200 components = -0.000113191 Jy ! Clean residual min=-0.001944 max=0.001601 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0539431 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.0539431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076567Jy sigma=0.000637 ! Fit after self-cal, rms=0.076564Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.634 mas, bpa=5.472 degrees ! Estimated noise=606.285 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 7.634 at 5.472 degrees (North through East) ! Clean map min=-0.0014761 max=0.049218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=6.802 mas, bpa=5.708 degrees ! Estimated noise=907.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379929 Jy ! Component: 100 - total flux cleaned = 0.0467966 Jy ! Component: 150 - total flux cleaned = 0.050791 Jy ! Component: 200 - total flux cleaned = 0.0529967 Jy ! Total flux subtracted in 200 components = 0.0529967 Jy ! Clean residual min=-0.002233 max=0.002590 Jy/beam ! Clean residual mean=-0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0529967 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0529967 Jy ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.634 mas, bpa=5.472 degrees ! Estimated noise=606.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138638 Jy ! Component: 100 - total flux cleaned = 0.0016841 Jy ! Component: 150 - total flux cleaned = 0.00172661 Jy ! Component: 200 - total flux cleaned = 0.00175825 Jy ! Total flux subtracted in 200 components = 0.00175825 Jy ! Clean residual min=-0.001810 max=0.001408 Jy/beam ! Clean residual mean=-0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.054755 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.054755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.627 mas, bmaj=11.1 mas, bpa=-5.052 degrees ! Estimated noise=773.321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014992 Jy ! Component: 100 - total flux cleaned = -0.000102191 Jy ! Component: 150 - total flux cleaned = -0.000151517 Jy ! Component: 200 - total flux cleaned = -0.000194012 Jy ! Total flux subtracted in 200 components = -0.000194012 Jy ! Clean residual min=-0.001964 max=0.001656 Jy/beam ! Clean residual mean=-0.000000 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0545609 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.33393e-05 Jy ! Component: 100 - total flux cleaned = -1.38661e-05 Jy ! Component: 150 - total flux cleaned = -2.37283e-05 Jy ! Component: 200 - total flux cleaned = -1.43786e-05 Jy ! Total flux subtracted in 200 components = -1.43786e-05 Jy ! Clean residual min=-0.001936 max=0.001655 Jy/beam ! Clean residual mean=-0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0545466 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 74 components and 0.0545466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.634 mas, bpa=5.472 degrees ! Estimated noise=606.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.02044e-05 Jy ! Component: 100 - total flux cleaned = 0.000104397 Jy ! Component: 150 - total flux cleaned = 0.000104081 Jy ! Component: 200 - total flux cleaned = 8.58472e-05 Jy ! Total flux subtracted in 200 components = 8.58472e-05 Jy ! Clean residual min=-0.001573 max=0.001405 Jy/beam ! Clean residual mean=-0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0546324 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.0546324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076555Jy sigma=0.000637 ! Fit after self-cal, rms=0.076536Jy sigma=0.000636 wmodel J1444+1131_S_2017_07_16_pus_map.mod ! Writing 90 model components to file: J1444+1131_S_2017_07_16_pus_map.mod wobs J1444+1131_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1444+1131_S_2017_07_16_pus_uvs.fits wwins J1444+1131_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1444+1131_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617055 Jy ! Component: 100 - total flux cleaned = -0.00102534 Jy ! Component: 150 - total flux cleaned = -0.00133429 Jy ! Component: 200 - total flux cleaned = -0.00144652 Jy ! Component: 250 - total flux cleaned = -0.00153334 Jy ! Component: 300 - total flux cleaned = -0.00157486 Jy ! Component: 350 - total flux cleaned = -0.00159449 Jy ! Component: 400 - total flux cleaned = -0.0016526 Jy ! Component: 450 - total flux cleaned = -0.00165273 Jy ! Component: 500 - total flux cleaned = -0.00174479 Jy ! Component: 550 - total flux cleaned = -0.0017447 Jy ! Component: 600 - total flux cleaned = -0.00176234 Jy ! Component: 650 - total flux cleaned = -0.00172847 Jy ! Component: 700 - total flux cleaned = -0.00174538 Jy ! Component: 750 - total flux cleaned = -0.00171216 Jy ! Component: 800 - total flux cleaned = -0.00172809 Jy ! Component: 850 - total flux cleaned = -0.00171217 Jy ! Component: 900 - total flux cleaned = -0.00175927 Jy ! Component: 950 - total flux cleaned = -0.00180531 Jy ! Component: 1000 - total flux cleaned = -0.00182066 Jy ! Component: 1050 - total flux cleaned = -0.00186543 Jy ! Component: 1100 - total flux cleaned = -0.00189454 Jy ! Component: 1150 - total flux cleaned = -0.00189461 Jy ! Component: 1200 - total flux cleaned = -0.00195119 Jy ! Component: 1250 - total flux cleaned = -0.00195082 Jy ! Component: 1300 - total flux cleaned = -0.00196446 Jy ! Component: 1350 - total flux cleaned = -0.00197796 Jy ! Component: 1400 - total flux cleaned = -0.00199119 Jy ! Component: 1450 - total flux cleaned = -0.00200412 Jy ! Component: 1500 - total flux cleaned = -0.00197816 Jy ! Component: 1550 - total flux cleaned = -0.00201647 Jy ! Component: 1600 - total flux cleaned = -0.00204113 Jy ! Component: 1650 - total flux cleaned = -0.00201611 Jy ! Component: 1700 - total flux cleaned = -0.00199149 Jy ! Component: 1750 - total flux cleaned = -0.00201538 Jy ! Component: 1800 - total flux cleaned = -0.0020033 Jy ! Component: 1850 - total flux cleaned = -0.00196803 Jy ! Component: 1900 - total flux cleaned = -0.00197969 Jy ! Component: 1950 - total flux cleaned = -0.0019569 Jy ! Component: 2000 - total flux cleaned = -0.00196841 Jy ! Component: 2050 - total flux cleaned = -0.00199074 Jy ! Component: 2100 - total flux cleaned = -0.00199069 Jy ! Component: 2150 - total flux cleaned = -0.00200157 Jy ! Component: 2200 - total flux cleaned = -0.00195843 Jy ! Component: 2250 - total flux cleaned = -0.00198007 Jy ! Component: 2300 - total flux cleaned = -0.00194837 Jy ! Component: 2350 - total flux cleaned = -0.00191695 Jy ! Component: 2400 - total flux cleaned = -0.00191691 Jy ! Component: 2450 - total flux cleaned = -0.00186565 Jy ! Component: 2500 - total flux cleaned = -0.0018353 Jy ! Component: 2550 - total flux cleaned = -0.00182528 Jy ! Component: 2600 - total flux cleaned = -0.00182521 Jy ! Component: 2650 - total flux cleaned = -0.00182536 Jy ! Component: 2700 - total flux cleaned = -0.00180594 Jy ! Component: 2750 - total flux cleaned = -0.00179621 Jy ! Component: 2800 - total flux cleaned = -0.00178651 Jy ! Component: 2850 - total flux cleaned = -0.00178633 Jy ! Component: 2900 - total flux cleaned = -0.00177723 Jy ! Component: 2950 - total flux cleaned = -0.00179581 Jy ! Component: 3000 - total flux cleaned = -0.00178669 Jy ! Component: 3050 - total flux cleaned = -0.00177759 Jy ! Component: 3100 - total flux cleaned = -0.00176859 Jy ! Component: 3150 - total flux cleaned = -0.00175079 Jy ! Component: 3200 - total flux cleaned = -0.00170674 Jy ! Component: 3250 - total flux cleaned = -0.0017155 Jy ! Component: 3300 - total flux cleaned = -0.00171559 Jy ! Component: 3350 - total flux cleaned = -0.00169844 Jy ! Component: 3400 - total flux cleaned = -0.00169001 Jy ! Component: 3450 - total flux cleaned = -0.00171529 Jy ! Component: 3500 - total flux cleaned = -0.00169007 Jy ! Component: 3550 - total flux cleaned = -0.00166528 Jy ! Component: 3600 - total flux cleaned = -0.00169819 Jy ! Component: 3650 - total flux cleaned = -0.00166558 Jy ! Component: 3700 - total flux cleaned = -0.00168176 Jy ! Component: 3750 - total flux cleaned = -0.00167376 Jy ! Component: 3800 - total flux cleaned = -0.00166587 Jy ! Component: 3850 - total flux cleaned = -0.00167379 Jy ! Component: 3900 - total flux cleaned = -0.00165032 Jy ! Component: 3950 - total flux cleaned = -0.00165034 Jy ! Component: 4000 - total flux cleaned = -0.00165042 Jy ! Component: 4050 - total flux cleaned = -0.00166573 Jy ! Total flux subtracted in 4096 components = -0.00165038 Jy ! Clean residual min=-0.000399 max=0.000442 Jy/beam ! Clean residual mean=0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.052982 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 398 components and 0.0529821 Jy ![Exited script file: muppet] wmap "J1444+1131_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 7.634 at 5.472 degrees (North through East) ! Clean map min=-0.0010444 max=0.049079 Jy/beam ! Writing clean map to FITS file: J1444+1131_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.049079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.856767 0.856767 1.71353 3.42707 6.85413 13.7083 27.4165 54.8331 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.32 x 7.634 at 5.472 degrees (North through East) ! Clean map min=-0.0010444 max=0.049079 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1444+1131_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:11:39 2019