! Started logfile: J1444+0257_S_2017_10_21_pus_uvs.log on Sat May 11 21:00:03 2019 obs J1444+0257_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1444+0257_S_2017_10_21_pus_uva.fits ! AN table 1: 194 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.943299 visibilities/baseline/integration-bin. ! Found source: J1444+0257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 26352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1444+0257_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1042 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979281Jy sigma=0.008902 ! Fit after self-cal, rms=0.950804Jy sigma=0.008668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=14.11 mas, bpa=-19.85 degrees ! Estimated noise=1018.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403071 Jy ! Component: 100 - total flux cleaned = 0.0492518 Jy ! Total flux subtracted in 100 components = 0.0492518 Jy ! Clean residual min=-0.003958 max=0.003740 Jy/beam ! Clean residual mean=-0.000018 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.0492518 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0492518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084519Jy sigma=0.000701 ! Fit after self-cal, rms=0.083945Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=16.74 mas, bpa=-19.39 degrees ! Estimated noise=575.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417611 Jy ! Component: 100 - total flux cleaned = 0.00644196 Jy ! Component: 150 - total flux cleaned = 0.00795441 Jy ! Component: 200 - total flux cleaned = 0.00903906 Jy ! Total flux subtracted in 200 components = 0.00903906 Jy ! Clean residual min=-0.003605 max=0.002464 Jy/beam ! Clean residual mean=-0.000031 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0582908 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 58 components and 0.0582908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083687Jy sigma=0.000694 ! Fit after self-cal, rms=0.083679Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.20 ! LA 1.05 MK 1.08 NL 0.97 OV 1.03 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.99 KP 1.09 ! LA 0.97 MK 1.03 NL 1.13 OV 1.10 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.04 HN 1.07 KP 1.03 ! LA 0.85 MK 1.05 NL 1.18 OV 0.99 ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.79 KP 1.00* ! LA 0.77 MK 0.97 NL 1.00* OV 1.00* ! PT 0.74 ! ! ! Fit before self-cal, rms=0.083679Jy sigma=0.000694 ! Fit after self-cal, rms=0.081093Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=16.72 mas, bpa=-19.24 degrees ! Estimated noise=575.216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175486 Jy ! Component: 100 - total flux cleaned = 0.000177579 Jy ! Component: 150 - total flux cleaned = 0.0001283 Jy ! Component: 200 - total flux cleaned = 0.000128362 Jy ! Total flux subtracted in 200 components = 0.000128362 Jy ! Clean residual min=-0.001584 max=0.001657 Jy/beam ! Clean residual mean=-0.000008 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0584192 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.0584192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081075Jy sigma=0.000689 ! Fit after self-cal, rms=0.081205Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081205Jy sigma=0.000688 ! Fit after self-cal, rms=0.081071Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=16.7 mas, bpa=-19.35 degrees ! Estimated noise=575.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155029 Jy ! Component: 100 - total flux cleaned = -0.000134293 Jy ! Component: 150 - total flux cleaned = -9.83485e-05 Jy ! Component: 200 - total flux cleaned = -6.60213e-05 Jy ! Total flux subtracted in 200 components = -6.60213e-05 Jy ! Clean residual min=-0.001481 max=0.001437 Jy/beam ! Clean residual mean=-0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0583532 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.0583532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081059Jy sigma=0.000687 ! Fit after self-cal, rms=0.081191Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163721 Jy ! Component: 100 - total flux cleaned = 0.000182018 Jy ! Component: 150 - total flux cleaned = 0.000216116 Jy ! Component: 200 - total flux cleaned = 0.000232229 Jy ! Total flux subtracted in 200 components = 0.000232229 Jy ! Clean residual min=-0.001594 max=0.001439 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0585854 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.0585854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081183Jy sigma=0.000687 ! Fit after self-cal, rms=0.081185Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081185Jy sigma=0.000687 ! Fit after self-cal, rms=0.082019Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=16.69 mas, bpa=-19.39 degrees ! Estimated noise=579.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141235 Jy ! Component: 100 - total flux cleaned = -0.00014205 Jy ! Component: 150 - total flux cleaned = -0.00011226 Jy ! Component: 200 - total flux cleaned = -0.00012608 Jy ! Total flux subtracted in 200 components = -0.00012608 Jy ! Clean residual min=-0.001488 max=0.001463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0584593 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.0584593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082012Jy sigma=0.000687 ! Fit after self-cal, rms=0.082092Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69916e-05 Jy ! Component: 100 - total flux cleaned = -1.23585e-05 Jy ! Component: 150 - total flux cleaned = 1.48232e-06 Jy ! Component: 200 - total flux cleaned = 2.66058e-05 Jy ! Total flux subtracted in 200 components = 2.66058e-05 Jy ! Clean residual min=-0.001507 max=0.001450 Jy/beam ! Clean residual mean=-0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0584859 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 103 components and 0.0584859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082087Jy sigma=0.000687 ! Fit after self-cal, rms=0.082090Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082090Jy sigma=0.000687 ! Fit after self-cal, rms=0.082685Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.293 mas, bmaj=16.71 mas, bpa=-18.47 degrees ! Estimated noise=669.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.04539e-05 Jy ! Component: 100 - total flux cleaned = -2.72513e-05 Jy ! Component: 150 - total flux cleaned = -0.000128377 Jy ! Component: 200 - total flux cleaned = -0.00015618 Jy ! Total flux subtracted in 200 components = -0.00015618 Jy ! Clean residual min=-0.001486 max=0.001547 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0583298 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 0.0583298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082683Jy sigma=0.000686 ! Fit after self-cal, rms=0.082727Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.43885e-06 Jy ! Component: 100 - total flux cleaned = -3.7625e-05 Jy ! Component: 150 - total flux cleaned = -6.25842e-05 Jy ! Component: 200 - total flux cleaned = -8.55583e-05 Jy ! Total flux subtracted in 200 components = -8.55583e-05 Jy ! Clean residual min=-0.001473 max=0.001536 Jy/beam ! Clean residual mean=-0.000003 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0582442 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 113 components and 0.0582442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082725Jy sigma=0.000686 ! Fit after self-cal, rms=0.082717Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=16.7 mas, bpa=-19.42 degrees ! Estimated noise=581.665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 16.7 at -19.42 degrees (North through East) ! Clean map min=-0.0014006 max=0.051751 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=13.9 mas, bpa=-19.79 degrees ! Estimated noise=1029.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040511 Jy ! Component: 100 - total flux cleaned = 0.0495226 Jy ! Component: 150 - total flux cleaned = 0.0518832 Jy ! Component: 200 - total flux cleaned = 0.0531938 Jy ! Total flux subtracted in 200 components = 0.0531938 Jy ! Clean residual min=-0.003259 max=0.002877 Jy/beam ! Clean residual mean=-0.000007 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0531938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0531938 Jy ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=16.7 mas, bpa=-19.42 degrees ! Estimated noise=581.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279571 Jy ! Component: 100 - total flux cleaned = 0.00425495 Jy ! Component: 150 - total flux cleaned = 0.00472649 Jy ! Component: 200 - total flux cleaned = 0.00490352 Jy ! Total flux subtracted in 200 components = 0.00490352 Jy ! Clean residual min=-0.001623 max=0.001510 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0580973 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 55 components and 0.0580973 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.293 mas, bmaj=16.71 mas, bpa=-18.47 degrees ! Estimated noise=669.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167464 Jy ! Component: 100 - total flux cleaned = 0.000286639 Jy ! Component: 150 - total flux cleaned = 0.000337547 Jy ! Component: 200 - total flux cleaned = 0.000296271 Jy ! Total flux subtracted in 200 components = 0.000296271 Jy ! Clean residual min=-0.001522 max=0.001694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0583936 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79711e-05 Jy ! Component: 100 - total flux cleaned = -7.31233e-05 Jy ! Component: 150 - total flux cleaned = -0.000106001 Jy ! Component: 200 - total flux cleaned = -0.000146129 Jy ! Total flux subtracted in 200 components = -0.000146129 Jy ! Clean residual min=-0.001479 max=0.001692 Jy/beam ! Clean residual mean=-0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0582475 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 0.0582475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=16.7 mas, bpa=-19.42 degrees ! Estimated noise=581.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.64389e-05 Jy ! Component: 100 - total flux cleaned = 0.000122545 Jy ! Component: 150 - total flux cleaned = 8.0222e-05 Jy ! Component: 200 - total flux cleaned = 0.000120445 Jy ! Total flux subtracted in 200 components = 0.000120445 Jy ! Clean residual min=-0.001544 max=0.001541 Jy/beam ! Clean residual mean=-0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0583679 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.0583679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082728Jy sigma=0.000686 ! Fit after self-cal, rms=0.082723Jy sigma=0.000686 wmodel J1444+0257_S_2017_10_21_pus_map.mod ! Writing 90 model components to file: J1444+0257_S_2017_10_21_pus_map.mod wobs J1444+0257_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1444+0257_S_2017_10_21_pus_uvs.fits wwins J1444+0257_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1444+0257_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.24422e-05 Jy ! Component: 100 - total flux cleaned = 0.000312712 Jy ! Component: 150 - total flux cleaned = 0.000541777 Jy ! Component: 200 - total flux cleaned = 0.000671353 Jy ! Component: 250 - total flux cleaned = 0.000773678 Jy ! Component: 300 - total flux cleaned = 0.000891426 Jy ! Component: 350 - total flux cleaned = 0.000967482 Jy ! Component: 400 - total flux cleaned = 0.00104148 Jy ! Component: 450 - total flux cleaned = 0.00105984 Jy ! Component: 500 - total flux cleaned = 0.00112956 Jy ! Component: 550 - total flux cleaned = 0.00112937 Jy ! Component: 600 - total flux cleaned = 0.00109637 Jy ! Component: 650 - total flux cleaned = 0.0011124 Jy ! Component: 700 - total flux cleaned = 0.00112806 Jy ! Component: 750 - total flux cleaned = 0.00114335 Jy ! Component: 800 - total flux cleaned = 0.00118827 Jy ! Component: 850 - total flux cleaned = 0.00120295 Jy ! Component: 900 - total flux cleaned = 0.00123163 Jy ! Component: 950 - total flux cleaned = 0.00127384 Jy ! Component: 1000 - total flux cleaned = 0.00130142 Jy ! Component: 1050 - total flux cleaned = 0.00132864 Jy ! Component: 1100 - total flux cleaned = 0.00138193 Jy ! Component: 1150 - total flux cleaned = 0.00144743 Jy ! Component: 1200 - total flux cleaned = 0.00152485 Jy ! Component: 1250 - total flux cleaned = 0.00157558 Jy ! Component: 1300 - total flux cleaned = 0.00161274 Jy ! Component: 1350 - total flux cleaned = 0.00164986 Jy ! Component: 1400 - total flux cleaned = 0.00171083 Jy ! Component: 1450 - total flux cleaned = 0.00173486 Jy ! Component: 1500 - total flux cleaned = 0.00177058 Jy ! Component: 1550 - total flux cleaned = 0.00181731 Jy ! Component: 1600 - total flux cleaned = 0.00179433 Jy ! Component: 1650 - total flux cleaned = 0.00180587 Jy ! Component: 1700 - total flux cleaned = 0.00182849 Jy ! Component: 1750 - total flux cleaned = 0.00185062 Jy ! Component: 1800 - total flux cleaned = 0.00179595 Jy ! Component: 1850 - total flux cleaned = 0.00181759 Jy ! Component: 1900 - total flux cleaned = 0.00181753 Jy ! Component: 1950 - total flux cleaned = 0.00180699 Jy ! Component: 2000 - total flux cleaned = 0.00180692 Jy ! Component: 2050 - total flux cleaned = 0.00178633 Jy ! Component: 2100 - total flux cleaned = 0.00178641 Jy ! Component: 2150 - total flux cleaned = 0.00178628 Jy ! Component: 2200 - total flux cleaned = 0.0017861 Jy ! Component: 2250 - total flux cleaned = 0.00176642 Jy ! Component: 2300 - total flux cleaned = 0.00177622 Jy ! Component: 2350 - total flux cleaned = 0.00182448 Jy ! Component: 2400 - total flux cleaned = 0.00184358 Jy ! Component: 2450 - total flux cleaned = 0.00183424 Jy ! Component: 2500 - total flux cleaned = 0.00189045 Jy ! Component: 2550 - total flux cleaned = 0.00191826 Jy ! Component: 2600 - total flux cleaned = 0.00196418 Jy ! Component: 2650 - total flux cleaned = 0.00199137 Jy ! Component: 2700 - total flux cleaned = 0.00200055 Jy ! Component: 2750 - total flux cleaned = 0.00204534 Jy ! Component: 2800 - total flux cleaned = 0.00207193 Jy ! Component: 2850 - total flux cleaned = 0.00211584 Jy ! Component: 2900 - total flux cleaned = 0.00212447 Jy ! Component: 2950 - total flux cleaned = 0.00213311 Jy ! Component: 3000 - total flux cleaned = 0.00219316 Jy ! Component: 3050 - total flux cleaned = 0.00222716 Jy ! Component: 3100 - total flux cleaned = 0.00222714 Jy ! Component: 3150 - total flux cleaned = 0.00224377 Jy ! Component: 3200 - total flux cleaned = 0.0022771 Jy ! Component: 3250 - total flux cleaned = 0.00228527 Jy ! Component: 3300 - total flux cleaned = 0.00231807 Jy ! Component: 3350 - total flux cleaned = 0.00235863 Jy ! Component: 3400 - total flux cleaned = 0.00236668 Jy ! Component: 3450 - total flux cleaned = 0.00235058 Jy ! Component: 3500 - total flux cleaned = 0.00239036 Jy ! Component: 3550 - total flux cleaned = 0.00242191 Jy ! Component: 3600 - total flux cleaned = 0.00244549 Jy ! Component: 3650 - total flux cleaned = 0.00243763 Jy ! Component: 3700 - total flux cleaned = 0.00245325 Jy ! Component: 3750 - total flux cleaned = 0.00249186 Jy ! Component: 3800 - total flux cleaned = 0.00251489 Jy ! Component: 3850 - total flux cleaned = 0.00254542 Jy ! Component: 3900 - total flux cleaned = 0.00258343 Jy ! Component: 3950 - total flux cleaned = 0.00259852 Jy ! Component: 4000 - total flux cleaned = 0.00264367 Jy ! Component: 4050 - total flux cleaned = 0.00266616 Jy ! Total flux subtracted in 4096 components = 0.00272571 Jy ! Clean residual min=-0.000432 max=0.000418 Jy/beam ! Clean residual mean=-0.000002 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0610936 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 342 components and 0.0610936 Jy ![Exited script file: muppet] wmap "J1444+0257_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 16.7 at -19.42 degrees (North through East) ! Clean map min=-0.0011416 max=0.052056 Jy/beam ! Writing clean map to FITS file: J1444+0257_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0520557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.806606 0.806606 1.61321 3.22642 6.45285 12.9057 25.8114 51.6228 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 16.7 at -19.42 degrees (North through East) ! Clean map min=-0.0011416 max=0.052056 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1444+0257_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:00:09 2019