! Started logfile: J1443+6332_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:35 2019 obs J1443+6332_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1443+6332_S_2017_07_09_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.927711 visibilities/baseline/integration-bin. ! Found source: J1443+6332 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1443+6332_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 450 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.669748Jy sigma=0.006073 ! Fit after self-cal, rms=0.647952Jy sigma=0.005879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=3.54 mas, bpa=-44.54 degrees ! Estimated noise=1204.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267071 Jy ! Component: 100 - total flux cleaned = 0.337198 Jy ! Total flux subtracted in 100 components = 0.337198 Jy ! Clean residual min=-0.026112 max=0.098226 Jy/beam ! Clean residual mean=0.000024 rms=0.007042 Jy/beam ! Combined flux in latest and established models = 0.337198 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.337198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167285Jy sigma=0.001482 ! Fit after self-cal, rms=0.167246Jy sigma=0.001482 ! Inverting map ! Added new window around map position (1, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080529 Jy ! Component: 100 - total flux cleaned = 0.117418 Jy ! Total flux subtracted in 100 components = 0.117418 Jy ! Clean residual min=-0.017054 max=0.031897 Jy/beam ! Clean residual mean=0.000059 rms=0.004197 Jy/beam ! Combined flux in latest and established models = 0.454616 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.454616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120953Jy sigma=0.001047 ! Fit after self-cal, rms=0.115424Jy sigma=0.000996 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312796 Jy ! Component: 100 - total flux cleaned = 0.0503389 Jy ! Total flux subtracted in 100 components = 0.0503389 Jy ! Clean residual min=-0.012447 max=0.013797 Jy/beam ! Clean residual mean=0.000073 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 0.504955 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.504955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104967Jy sigma=0.000897 ! Fit after self-cal, rms=0.104171Jy sigma=0.000889 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=4.214 mas, bpa=-5.403 degrees ! Estimated noise=754.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188607 Jy ! Component: 100 - total flux cleaned = 0.0291594 Jy ! Component: 150 - total flux cleaned = 0.0318649 Jy ! Component: 200 - total flux cleaned = 0.0331426 Jy ! Total flux subtracted in 200 components = 0.0331426 Jy ! Clean residual min=-0.010919 max=0.012563 Jy/beam ! Clean residual mean=0.000228 rms=0.002800 Jy/beam ! Combined flux in latest and established models = 0.538098 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.538097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100306Jy sigma=0.000856 ! Fit after self-cal, rms=0.100016Jy sigma=0.000853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.97 KP 1.00 ! LA 0.98 MK 1.08 NL 0.89 OV 1.00 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.02 KP 0.96 ! LA 0.96 MK 1.08 NL 0.98 OV 0.94 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.05 HN 1.00 KP 0.96 ! LA 0.98 MK 1.12 NL 1.00 OV 0.95 ! PT 1.16 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 1.00* ! LA 0.99 MK 1.13 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.100016Jy sigma=0.000853 ! Fit after self-cal, rms=0.095404Jy sigma=0.000799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.169 mas, bmaj=4.29 mas, bpa=2.365 degrees ! Estimated noise=758.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588132 Jy ! Component: 100 - total flux cleaned = 0.00528293 Jy ! Component: 150 - total flux cleaned = 0.00462671 Jy ! Component: 200 - total flux cleaned = 0.00423402 Jy ! Total flux subtracted in 200 components = 0.00423402 Jy ! Clean residual min=-0.008410 max=0.009944 Jy/beam ! Clean residual mean=0.000194 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.542331 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.542331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094431Jy sigma=0.000790 ! Fit after self-cal, rms=0.094276Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094276Jy sigma=0.000788 ! Fit after self-cal, rms=0.083261Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.186 mas, bmaj=4.284 mas, bpa=4.199 degrees ! Estimated noise=763.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285891 Jy ! Component: 100 - total flux cleaned = -0.00028167 Jy ! Component: 150 - total flux cleaned = -0.000279509 Jy ! Component: 200 - total flux cleaned = -0.000282771 Jy ! Total flux subtracted in 200 components = -0.000282771 Jy ! Clean residual min=-0.003256 max=0.004153 Jy/beam ! Clean residual mean=0.000005 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.542049 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.542049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082957Jy sigma=0.000673 ! Fit after self-cal, rms=0.083032Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397714 Jy ! Component: 100 - total flux cleaned = 0.00420455 Jy ! Component: 150 - total flux cleaned = 0.00411282 Jy ! Component: 200 - total flux cleaned = 0.00419307 Jy ! Total flux subtracted in 200 components = 0.00419307 Jy ! Clean residual min=-0.002957 max=0.003392 Jy/beam ! Clean residual mean=0.000007 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.546242 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.546242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082758Jy sigma=0.000670 ! Fit after self-cal, rms=0.082744Jy sigma=0.000670 ! Inverting map ! Added new window around map position (-18, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152995 Jy ! Component: 100 - total flux cleaned = 0.00197907 Jy ! Component: 150 - total flux cleaned = 0.00236888 Jy ! Component: 200 - total flux cleaned = 0.00272405 Jy ! Total flux subtracted in 200 components = 0.00272405 Jy ! Clean residual min=-0.002806 max=0.003301 Jy/beam ! Clean residual mean=0.000006 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.548966 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.548966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082561Jy sigma=0.000668 ! Fit after self-cal, rms=0.082555Jy sigma=0.000668 ! Inverting map ! Added new window around map position (26.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016007 Jy ! Component: 100 - total flux cleaned = 0.00192033 Jy ! Component: 150 - total flux cleaned = 0.00256625 Jy ! Component: 200 - total flux cleaned = 0.00276329 Jy ! Total flux subtracted in 200 components = 0.00276329 Jy ! Clean residual min=-0.002519 max=0.002602 Jy/beam ! Clean residual mean=0.000006 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.551729 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.551729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082394Jy sigma=0.000667 ! Fit after self-cal, rms=0.082390Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082390Jy sigma=0.000667 ! Fit after self-cal, rms=0.082385Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.183 mas, bmaj=4.287 mas, bpa=3.63 degrees ! Estimated noise=763.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062734 Jy ! Component: 100 - total flux cleaned = 0.000950512 Jy ! Component: 150 - total flux cleaned = 0.00125068 Jy ! Component: 200 - total flux cleaned = 0.00153444 Jy ! Total flux subtracted in 200 components = 0.00153444 Jy ! Clean residual min=-0.002472 max=0.002450 Jy/beam ! Clean residual mean=0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.553264 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 114 components and 0.553264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082300Jy sigma=0.000666 ! Fit after self-cal, rms=0.082297Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112939 Jy ! Component: 100 - total flux cleaned = 0.000167133 Jy ! Component: 150 - total flux cleaned = 0.000269993 Jy ! Component: 200 - total flux cleaned = 0.00036713 Jy ! Total flux subtracted in 200 components = 0.00036713 Jy ! Clean residual min=-0.002393 max=0.002369 Jy/beam ! Clean residual mean=0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.553631 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 124 components and 0.553631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082239Jy sigma=0.000665 ! Fit after self-cal, rms=0.082237Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082237Jy sigma=0.000665 ! Fit after self-cal, rms=0.082232Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.186 mas, bmaj=8.776 mas, bpa=78.14 degrees ! Estimated noise=960.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143521 Jy ! Component: 100 - total flux cleaned = 0.00188049 Jy ! Component: 150 - total flux cleaned = 0.00199817 Jy ! Component: 200 - total flux cleaned = 0.00202397 Jy ! Total flux subtracted in 200 components = 0.00202397 Jy ! Clean residual min=-0.002317 max=0.002279 Jy/beam ! Clean residual mean=0.000007 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.555655 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 150 components and 0.555655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082220Jy sigma=0.000665 ! Fit after self-cal, rms=0.082217Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33661e-05 Jy ! Component: 100 - total flux cleaned = 0.000180064 Jy ! Component: 150 - total flux cleaned = 0.000226546 Jy ! Component: 200 - total flux cleaned = 0.000269715 Jy ! Total flux subtracted in 200 components = 0.000269715 Jy ! Clean residual min=-0.002314 max=0.002248 Jy/beam ! Clean residual mean=0.000007 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.555924 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 0.555924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082213Jy sigma=0.000665 ! Fit after self-cal, rms=0.082211Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.18 mas, bmaj=4.287 mas, bpa=3.128 degrees ! Estimated noise=762.873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.18 x 4.287 at 3.128 degrees (North through East) ! Clean map min=-0.0021958 max=0.33745 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=3.594 mas, bpa=-56.58 degrees ! Estimated noise=1233.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.279485 Jy ! Component: 100 - total flux cleaned = 0.382454 Jy ! Component: 150 - total flux cleaned = 0.435739 Jy ! Component: 200 - total flux cleaned = 0.469229 Jy ! Total flux subtracted in 200 components = 0.469229 Jy ! Clean residual min=-0.008615 max=0.018097 Jy/beam ! Clean residual mean=-0.000003 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.469229 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.469229 Jy ! Inverting map and beam ! Estimated beam: bmin=4.18 mas, bmaj=4.287 mas, bpa=3.128 degrees ! Estimated noise=762.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293885 Jy ! Component: 100 - total flux cleaned = 0.0471635 Jy ! Component: 150 - total flux cleaned = 0.0583977 Jy ! Component: 200 - total flux cleaned = 0.0658913 Jy ! Total flux subtracted in 200 components = 0.0658913 Jy ! Clean residual min=-0.003432 max=0.005303 Jy/beam ! Clean residual mean=-0.000000 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.53512 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 56 components and 0.53512 Jy ! Inverting map ! Added new window around map position (-4.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586201 Jy ! Component: 100 - total flux cleaned = 0.0103956 Jy ! Component: 150 - total flux cleaned = 0.0130459 Jy ! Component: 200 - total flux cleaned = 0.0148669 Jy ! Total flux subtracted in 200 components = 0.0148669 Jy ! Clean residual min=-0.002931 max=0.003221 Jy/beam ! Clean residual mean=0.000003 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.549987 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.549987 Jy ! Inverting map ! Added new window around map position (-30, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002147 Jy ! Component: 100 - total flux cleaned = 0.00286464 Jy ! Component: 150 - total flux cleaned = 0.00353537 Jy ! Component: 200 - total flux cleaned = 0.00416325 Jy ! Total flux subtracted in 200 components = 0.00416325 Jy ! Clean residual min=-0.002601 max=0.002741 Jy/beam ! Clean residual mean=0.000002 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.55415 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 84 components and 0.554151 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.186 mas, bmaj=8.776 mas, bpa=78.14 degrees ! Estimated noise=960.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168621 Jy ! Component: 100 - total flux cleaned = 0.00233853 Jy ! Component: 150 - total flux cleaned = 0.00262066 Jy ! Component: 200 - total flux cleaned = 0.00270174 Jy ! Total flux subtracted in 200 components = 0.00270174 Jy ! Clean residual min=-0.002340 max=0.002323 Jy/beam ! Clean residual mean=0.000006 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.556852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78109e-05 Jy ! Component: 100 - total flux cleaned = 0.000107754 Jy ! Component: 150 - total flux cleaned = 0.000170591 Jy ! Component: 200 - total flux cleaned = 0.000227509 Jy ! Total flux subtracted in 200 components = 0.000227509 Jy ! Clean residual min=-0.002326 max=0.002219 Jy/beam ! Clean residual mean=0.000006 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.55708 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 137 components and 0.55708 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.18 mas, bmaj=4.287 mas, bpa=3.128 degrees ! Estimated noise=762.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000687741 Jy ! Component: 100 - total flux cleaned = -0.000870832 Jy ! Component: 150 - total flux cleaned = -0.000870986 Jy ! Component: 200 - total flux cleaned = -0.00103679 Jy ! Total flux subtracted in 200 components = -0.00103679 Jy ! Clean residual min=-0.002184 max=0.002449 Jy/beam ! Clean residual mean=0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.556043 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 0.556043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082474Jy sigma=0.000666 ! Fit after self-cal, rms=0.082434Jy sigma=0.000666 wmodel J1443+6332_S_2017_07_09_pus_map.mod ! Writing 152 model components to file: J1443+6332_S_2017_07_09_pus_map.mod wobs J1443+6332_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1443+6332_S_2017_07_09_pus_uvs.fits wwins J1443+6332_S_2017_07_09_pus_map.win ! wwins: Wrote 7 windows to J1443+6332_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010755 Jy ! Component: 100 - total flux cleaned = 0.00144993 Jy ! Component: 150 - total flux cleaned = 0.00153036 Jy ! Component: 200 - total flux cleaned = 0.00160779 Jy ! Component: 250 - total flux cleaned = 0.00175703 Jy ! Component: 300 - total flux cleaned = 0.00182961 Jy ! Component: 350 - total flux cleaned = 0.00200902 Jy ! Component: 400 - total flux cleaned = 0.00225463 Jy ! Component: 450 - total flux cleaned = 0.00242708 Jy ! Component: 500 - total flux cleaned = 0.00263062 Jy ! Component: 550 - total flux cleaned = 0.00289796 Jy ! Component: 600 - total flux cleaned = 0.00306124 Jy ! Component: 650 - total flux cleaned = 0.00319048 Jy ! Component: 700 - total flux cleaned = 0.00328659 Jy ! Component: 750 - total flux cleaned = 0.00350607 Jy ! Component: 800 - total flux cleaned = 0.00362984 Jy ! Component: 850 - total flux cleaned = 0.00372154 Jy ! Component: 900 - total flux cleaned = 0.00390252 Jy ! Component: 950 - total flux cleaned = 0.00405098 Jy ! Component: 1000 - total flux cleaned = 0.00416818 Jy ! Component: 1050 - total flux cleaned = 0.00422612 Jy ! Component: 1100 - total flux cleaned = 0.00434022 Jy ! Component: 1150 - total flux cleaned = 0.0043963 Jy ! Component: 1200 - total flux cleaned = 0.0043406 Jy ! Component: 1250 - total flux cleaned = 0.00434054 Jy ! Component: 1300 - total flux cleaned = 0.00436773 Jy ! Component: 1350 - total flux cleaned = 0.00436815 Jy ! Component: 1400 - total flux cleaned = 0.00444802 Jy ! Component: 1450 - total flux cleaned = 0.00439508 Jy ! Component: 1500 - total flux cleaned = 0.00439553 Jy ! Component: 1550 - total flux cleaned = 0.00449882 Jy ! Component: 1600 - total flux cleaned = 0.00442219 Jy ! Component: 1650 - total flux cleaned = 0.00449819 Jy ! Component: 1700 - total flux cleaned = 0.0044478 Jy ! Component: 1750 - total flux cleaned = 0.00454691 Jy ! Component: 1800 - total flux cleaned = 0.00435018 Jy ! Component: 1850 - total flux cleaned = 0.00447178 Jy ! Component: 1900 - total flux cleaned = 0.00444755 Jy ! Component: 1950 - total flux cleaned = 0.00435215 Jy ! Component: 2000 - total flux cleaned = 0.00435234 Jy ! Component: 2050 - total flux cleaned = 0.004329 Jy ! Component: 2100 - total flux cleaned = 0.00437554 Jy ! Component: 2150 - total flux cleaned = 0.00430639 Jy ! Component: 2200 - total flux cleaned = 0.00432926 Jy ! Component: 2250 - total flux cleaned = 0.00423917 Jy ! Component: 2300 - total flux cleaned = 0.00423917 Jy ! Component: 2350 - total flux cleaned = 0.00426151 Jy ! Component: 2400 - total flux cleaned = 0.00426156 Jy ! Component: 2450 - total flux cleaned = 0.00428338 Jy ! Component: 2500 - total flux cleaned = 0.0042183 Jy ! Component: 2550 - total flux cleaned = 0.004304 Jy ! Component: 2600 - total flux cleaned = 0.00428258 Jy ! Component: 2650 - total flux cleaned = 0.00432455 Jy ! Component: 2700 - total flux cleaned = 0.00430354 Jy ! Component: 2750 - total flux cleaned = 0.00434493 Jy ! Component: 2800 - total flux cleaned = 0.00424159 Jy ! Component: 2850 - total flux cleaned = 0.00422092 Jy ! Component: 2900 - total flux cleaned = 0.00430238 Jy ! Component: 2950 - total flux cleaned = 0.00418141 Jy ! Component: 3000 - total flux cleaned = 0.00420139 Jy ! Component: 3050 - total flux cleaned = 0.00412195 Jy ! Component: 3100 - total flux cleaned = 0.00414187 Jy ! Component: 3150 - total flux cleaned = 0.00414187 Jy ! Component: 3200 - total flux cleaned = 0.00416116 Jy ! Component: 3250 - total flux cleaned = 0.00412248 Jy ! Component: 3300 - total flux cleaned = 0.00404544 Jy ! Component: 3350 - total flux cleaned = 0.00402632 Jy ! Component: 3400 - total flux cleaned = 0.00410209 Jy ! Component: 3450 - total flux cleaned = 0.00402686 Jy ! Component: 3500 - total flux cleaned = 0.00406428 Jy ! Component: 3550 - total flux cleaned = 0.00404581 Jy ! Component: 3600 - total flux cleaned = 0.00402728 Jy ! Component: 3650 - total flux cleaned = 0.0040273 Jy ! Component: 3700 - total flux cleaned = 0.00395458 Jy ! Component: 3750 - total flux cleaned = 0.00397249 Jy ! Component: 3800 - total flux cleaned = 0.00393652 Jy ! Component: 3850 - total flux cleaned = 0.00400788 Jy ! Component: 3900 - total flux cleaned = 0.00395476 Jy ! Component: 3950 - total flux cleaned = 0.00390191 Jy ! Component: 4000 - total flux cleaned = 0.00377914 Jy ! Component: 4050 - total flux cleaned = 0.00383135 Jy ! Total flux subtracted in 4096 components = 0.003762 Jy ! Clean residual min=-0.000953 max=0.001112 Jy/beam ! Clean residual mean=0.000002 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.559805 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 425 components and 0.559805 Jy ![Exited script file: muppet] wmap "J1443+6332_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.18 x 4.287 at 3.128 degrees (North through East) ! Clean map min=-0.0017339 max=0.33708 Jy/beam ! Writing clean map to FITS file: J1443+6332_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.337084 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266272 0.266272 0.532544 1.06509 2.13018 4.26035 8.5207 17.0414 34.0828 68.1656 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.337 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.18 x 4.287 at 3.128 degrees (North through East) ! Clean map min=-0.0017339 max=0.33708 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1443+6332_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:40 2019