! Started logfile: J1441-3456_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:58 2019 obs J1441-3456_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1441-3456_S_2017_05_01_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.718008 visibilities/baseline/integration-bin. ! Found source: J1441-3456 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1441-3456_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 877 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.777990Jy sigma=0.003985 ! Fit after self-cal, rms=0.752039Jy sigma=0.003848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.218 mas, bpa=-3.3 degrees ! Estimated noise=1999.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190034 Jy ! Component: 100 - total flux cleaned = 0.244036 Jy ! Total flux subtracted in 100 components = 0.244036 Jy ! Clean residual min=-0.014681 max=0.027251 Jy/beam ! Clean residual mean=0.000108 rms=0.004617 Jy/beam ! Combined flux in latest and established models = 0.244036 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.244036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160136Jy sigma=0.000771 ! Fit after self-cal, rms=0.160110Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=7.534 mas, bpa=-1.062 degrees ! Estimated noise=1278.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048425 Jy ! Component: 100 - total flux cleaned = 0.0725441 Jy ! Component: 150 - total flux cleaned = 0.0849272 Jy ! Component: 200 - total flux cleaned = 0.0912938 Jy ! Total flux subtracted in 200 components = 0.0912938 Jy ! Clean residual min=-0.007869 max=0.011581 Jy/beam ! Clean residual mean=0.000070 rms=0.002355 Jy/beam ! Combined flux in latest and established models = 0.33533 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.33533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147912Jy sigma=0.000683 ! Fit after self-cal, rms=0.147918Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.37 KP 1.01 ! LA 0.99 MK 0.98 NL 0.99 OV 1.01 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.50 KP 0.99 ! LA 0.96 MK 0.99 NL 1.07 OV 1.03 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.50 KP 1.00 ! LA 0.98 MK 1.01 NL 1.09 OV 0.95 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 1.53 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.147918Jy sigma=0.000682 ! Fit after self-cal, rms=0.164774Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=7.533 mas, bpa=-0.4334 degrees ! Estimated noise=1294.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401468 Jy ! Component: 100 - total flux cleaned = 0.0034516 Jy ! Component: 150 - total flux cleaned = 0.00263724 Jy ! Component: 200 - total flux cleaned = 0.00213693 Jy ! Total flux subtracted in 200 components = 0.00213693 Jy ! Clean residual min=-0.005444 max=0.004297 Jy/beam ! Clean residual mean=0.000033 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.337467 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.337467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164457Jy sigma=0.000666 ! Fit after self-cal, rms=0.164800Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164800Jy sigma=0.000666 ! Fit after self-cal, rms=0.164680Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.498 mas, bpa=-0.428 degrees ! Estimated noise=1287.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143549 Jy ! Component: 100 - total flux cleaned = 0.00127878 Jy ! Component: 150 - total flux cleaned = 0.00105737 Jy ! Component: 200 - total flux cleaned = 0.00085013 Jy ! Total flux subtracted in 200 components = 0.00085013 Jy ! Clean residual min=-0.004079 max=0.003789 Jy/beam ! Clean residual mean=0.000010 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.338317 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.338317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164601Jy sigma=0.000663 ! Fit after self-cal, rms=0.164607Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5991e-05 Jy ! Component: 100 - total flux cleaned = -0.000177845 Jy ! Component: 150 - total flux cleaned = -0.000357603 Jy ! Component: 200 - total flux cleaned = -0.000526178 Jy ! Total flux subtracted in 200 components = -0.000526178 Jy ! Clean residual min=-0.003993 max=0.003708 Jy/beam ! Clean residual mean=0.000011 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.337791 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.337791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164555Jy sigma=0.000663 ! Fit after self-cal, rms=0.164554Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164554Jy sigma=0.000663 ! Fit after self-cal, rms=0.165328Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=7.476 mas, bpa=-0.4828 degrees ! Estimated noise=1285.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308979 Jy ! Component: 100 - total flux cleaned = 0.000194991 Jy ! Component: 150 - total flux cleaned = 0.000140624 Jy ! Component: 200 - total flux cleaned = 3.68423e-05 Jy ! Total flux subtracted in 200 components = 3.68423e-05 Jy ! Clean residual min=-0.003612 max=0.003608 Jy/beam ! Clean residual mean=0.000003 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.337828 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.337828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165279Jy sigma=0.000663 ! Fit after self-cal, rms=0.165287Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66109e-05 Jy ! Component: 100 - total flux cleaned = -0.000104971 Jy ! Component: 150 - total flux cleaned = -0.000107124 Jy ! Component: 200 - total flux cleaned = -0.000150719 Jy ! Total flux subtracted in 200 components = -0.000150719 Jy ! Clean residual min=-0.003559 max=0.003495 Jy/beam ! Clean residual mean=0.000003 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.337677 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.337677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165256Jy sigma=0.000663 ! Fit after self-cal, rms=0.165253Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165253Jy sigma=0.000663 ! Fit after self-cal, rms=0.165807Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=23.44 mas, bpa=3.75 degrees ! Estimated noise=1557.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516484 Jy ! Component: 100 - total flux cleaned = -0.000631312 Jy ! Component: 150 - total flux cleaned = -0.000708284 Jy ! Component: 200 - total flux cleaned = -0.0008009 Jy ! Total flux subtracted in 200 components = -0.0008009 Jy ! Clean residual min=-0.003799 max=0.002973 Jy/beam ! Clean residual mean=0.000005 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.336876 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.336876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165803Jy sigma=0.000663 ! Fit after self-cal, rms=0.165803Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.46291e-05 Jy ! Component: 100 - total flux cleaned = -3.59895e-06 Jy ! Component: 150 - total flux cleaned = -6.48462e-05 Jy ! Component: 200 - total flux cleaned = -0.000138999 Jy ! Total flux subtracted in 200 components = -0.000138999 Jy ! Clean residual min=-0.003719 max=0.003006 Jy/beam ! Clean residual mean=0.000005 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.336737 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 102 components and 0.336737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165803Jy sigma=0.000663 ! Fit after self-cal, rms=0.165798Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.462 mas, bpa=-0.4958 degrees ! Estimated noise=1283.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.462 at -0.4958 degrees (North through East) ! Clean map min=-0.0048645 max=0.24298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=6.124 mas, bpa=-2.71 degrees ! Estimated noise=2027.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192376 Jy ! Component: 100 - total flux cleaned = 0.249803 Jy ! Component: 150 - total flux cleaned = 0.280782 Jy ! Component: 200 - total flux cleaned = 0.299119 Jy ! Total flux subtracted in 200 components = 0.299119 Jy ! Clean residual min=-0.006701 max=0.010154 Jy/beam ! Clean residual mean=0.000032 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.299119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.299119 Jy ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.462 mas, bpa=-0.4958 degrees ! Estimated noise=1283.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01745 Jy ! Component: 100 - total flux cleaned = 0.0262087 Jy ! Component: 150 - total flux cleaned = 0.0313059 Jy ! Component: 200 - total flux cleaned = 0.0326749 Jy ! Total flux subtracted in 200 components = 0.0326749 Jy ! Clean residual min=-0.004112 max=0.003797 Jy/beam ! Clean residual mean=0.000007 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.331794 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 83 components and 0.331793 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=23.44 mas, bpa=3.75 degrees ! Estimated noise=1557.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281634 Jy ! Component: 100 - total flux cleaned = 0.00294309 Jy ! Component: 150 - total flux cleaned = 0.0030573 Jy ! Component: 200 - total flux cleaned = 0.00321946 Jy ! Total flux subtracted in 200 components = 0.00321946 Jy ! Clean residual min=-0.003174 max=0.003064 Jy/beam ! Clean residual mean=0.000006 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.335013 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.76698e-05 Jy ! Component: 100 - total flux cleaned = 0.000111721 Jy ! Component: 150 - total flux cleaned = 0.000162279 Jy ! Component: 200 - total flux cleaned = 0.000162158 Jy ! Total flux subtracted in 200 components = 0.000162158 Jy ! Clean residual min=-0.003249 max=0.003034 Jy/beam ! Clean residual mean=0.000006 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.335175 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.335175 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.462 mas, bpa=-0.4958 degrees ! Estimated noise=1283.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.48003e-06 Jy ! Component: 100 - total flux cleaned = -0.000400148 Jy ! Component: 150 - total flux cleaned = -0.000621639 Jy ! Component: 200 - total flux cleaned = -0.000722107 Jy ! Total flux subtracted in 200 components = -0.000722107 Jy ! Clean residual min=-0.003789 max=0.003388 Jy/beam ! Clean residual mean=0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.334453 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.334453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165717Jy sigma=0.000663 ! Fit after self-cal, rms=0.165629Jy sigma=0.000662 wmodel J1441-3456_S_2017_05_01_pus_map.mod ! Writing 108 model components to file: J1441-3456_S_2017_05_01_pus_map.mod wobs J1441-3456_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1441-3456_S_2017_05_01_pus_uvs.fits wwins J1441-3456_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1441-3456_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132342 Jy ! Component: 100 - total flux cleaned = -0.000357646 Jy ! Component: 150 - total flux cleaned = -0.000515116 Jy ! Component: 200 - total flux cleaned = -0.000864077 Jy ! Component: 250 - total flux cleaned = -0.00115071 Jy ! Component: 300 - total flux cleaned = -0.00128708 Jy ! Component: 350 - total flux cleaned = -0.00115475 Jy ! Component: 400 - total flux cleaned = -0.00128343 Jy ! Component: 450 - total flux cleaned = -0.00124116 Jy ! Component: 500 - total flux cleaned = -0.00120115 Jy ! Component: 550 - total flux cleaned = -0.00112274 Jy ! Component: 600 - total flux cleaned = -0.000969307 Jy ! Component: 650 - total flux cleaned = -0.00108176 Jy ! Component: 700 - total flux cleaned = -0.00108185 Jy ! Component: 750 - total flux cleaned = -0.00111854 Jy ! Component: 800 - total flux cleaned = -0.00118996 Jy ! Component: 850 - total flux cleaned = -0.00122456 Jy ! Component: 900 - total flux cleaned = -0.00125824 Jy ! Component: 950 - total flux cleaned = -0.00129181 Jy ! Component: 1000 - total flux cleaned = -0.00135669 Jy ! Component: 1050 - total flux cleaned = -0.00126014 Jy ! Component: 1100 - total flux cleaned = -0.00119675 Jy ! Component: 1150 - total flux cleaned = -0.00119654 Jy ! Component: 1200 - total flux cleaned = -0.00113576 Jy ! Component: 1250 - total flux cleaned = -0.00122615 Jy ! Component: 1300 - total flux cleaned = -0.00122588 Jy ! Component: 1350 - total flux cleaned = -0.00128421 Jy ! Component: 1400 - total flux cleaned = -0.00119762 Jy ! Component: 1450 - total flux cleaned = -0.00131164 Jy ! Component: 1500 - total flux cleaned = -0.00125599 Jy ! Component: 1550 - total flux cleaned = -0.00139423 Jy ! Component: 1600 - total flux cleaned = -0.00125779 Jy ! Component: 1650 - total flux cleaned = -0.00131183 Jy ! Component: 1700 - total flux cleaned = -0.00136461 Jy ! Component: 1750 - total flux cleaned = -0.00133804 Jy ! Component: 1800 - total flux cleaned = -0.00128647 Jy ! Component: 1850 - total flux cleaned = -0.00133759 Jy ! Component: 1900 - total flux cleaned = -0.00138776 Jy ! Component: 1950 - total flux cleaned = -0.00136276 Jy ! Component: 2000 - total flux cleaned = -0.00126425 Jy ! Component: 2050 - total flux cleaned = -0.00128921 Jy ! Component: 2100 - total flux cleaned = -0.00124105 Jy ! Component: 2150 - total flux cleaned = -0.00131243 Jy ! Component: 2200 - total flux cleaned = -0.00131212 Jy ! Component: 2250 - total flux cleaned = -0.00124263 Jy ! Component: 2300 - total flux cleaned = -0.00133467 Jy ! Component: 2350 - total flux cleaned = -0.00137963 Jy ! Component: 2400 - total flux cleaned = -0.00142436 Jy ! Component: 2450 - total flux cleaned = -0.00146853 Jy ! Component: 2500 - total flux cleaned = -0.00153456 Jy ! Component: 2550 - total flux cleaned = -0.00159993 Jy ! Component: 2600 - total flux cleaned = -0.00157826 Jy ! Component: 2650 - total flux cleaned = -0.00164225 Jy ! Component: 2700 - total flux cleaned = -0.00168439 Jy ! Component: 2750 - total flux cleaned = -0.00170536 Jy ! Component: 2800 - total flux cleaned = -0.00183057 Jy ! Component: 2850 - total flux cleaned = -0.00185142 Jy ! Component: 2900 - total flux cleaned = -0.00183113 Jy ! Component: 2950 - total flux cleaned = -0.0018517 Jy ! Component: 3000 - total flux cleaned = -0.00189214 Jy ! Component: 3050 - total flux cleaned = -0.00195199 Jy ! Component: 3100 - total flux cleaned = -0.00187271 Jy ! Component: 3150 - total flux cleaned = -0.00191212 Jy ! Component: 3200 - total flux cleaned = -0.00199032 Jy ! Component: 3250 - total flux cleaned = -0.00199033 Jy ! Component: 3300 - total flux cleaned = -0.00195167 Jy ! Component: 3350 - total flux cleaned = -0.00195186 Jy ! Component: 3400 - total flux cleaned = -0.00191391 Jy ! Component: 3450 - total flux cleaned = -0.00193294 Jy ! Component: 3500 - total flux cleaned = -0.00198919 Jy ! Component: 3550 - total flux cleaned = -0.00195207 Jy ! Component: 3600 - total flux cleaned = -0.00197071 Jy ! Component: 3650 - total flux cleaned = -0.00195241 Jy ! Component: 3700 - total flux cleaned = -0.00200711 Jy ! Component: 3750 - total flux cleaned = -0.00204323 Jy ! Component: 3800 - total flux cleaned = -0.00198914 Jy ! Component: 3850 - total flux cleaned = -0.00206078 Jy ! Component: 3900 - total flux cleaned = -0.00198944 Jy ! Component: 3950 - total flux cleaned = -0.00202475 Jy ! Component: 4000 - total flux cleaned = -0.0020071 Jy ! Component: 4050 - total flux cleaned = -0.00198961 Jy ! Total flux subtracted in 4096 components = -0.00204175 Jy ! Clean residual min=-0.001047 max=0.001090 Jy/beam ! Clean residual mean=-0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.332411 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 407 components and 0.332411 Jy ![Exited script file: muppet] wmap "J1441-3456_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.462 at -0.4958 degrees (North through East) ! Clean map min=-0.0028042 max=0.24924 Jy/beam ! Writing clean map to FITS file: J1441-3456_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.24924 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00033386 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.401854 0.401854 0.803707 1.60741 3.21483 6.42966 12.8593 25.7186 51.4372 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.249 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.462 at -0.4958 degrees (North through East) ! Clean map min=-0.0028042 max=0.24924 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1441-3456_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:02 2019