! Started logfile: J1441-3303_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:53 2019 obs J1441-3303_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1441-3303_S_2017_05_01_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.692947 visibilities/baseline/integration-bin. ! Found source: J1441-3303 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1441-3303_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 679 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893334Jy sigma=0.014389 ! Fit after self-cal, rms=0.864435Jy sigma=0.014268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.516 mas, bmaj=6.169 mas, bpa=-13.21 degrees ! Estimated noise=1677.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826357 Jy ! Component: 100 - total flux cleaned = 0.115222 Jy ! Total flux subtracted in 100 components = 0.115222 Jy ! Clean residual min=-0.024511 max=0.030367 Jy/beam ! Clean residual mean=0.000010 rms=0.008136 Jy/beam ! Combined flux in latest and established models = 0.115222 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.115222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162548Jy sigma=0.001538 ! Fit after self-cal, rms=0.162469Jy sigma=0.001536 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.674 mas, bpa=-4.225 degrees ! Estimated noise=1009.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146327 Jy ! Component: 100 - total flux cleaned = 0.0134986 Jy ! Component: 150 - total flux cleaned = 0.0123333 Jy ! Component: 200 - total flux cleaned = 0.01166 Jy ! Total flux subtracted in 200 components = 0.01166 Jy ! Clean residual min=-0.023570 max=0.023410 Jy/beam ! Clean residual mean=0.000072 rms=0.007513 Jy/beam ! Combined flux in latest and established models = 0.126882 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.126882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157690Jy sigma=0.001681 ! Fit after self-cal, rms=0.157580Jy sigma=0.001681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.78 HN 1.23 KP 0.86 ! LA 0.83 MK 0.72 NL 0.81 OV 0.86 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.83 HN 1.28 KP 0.87 ! LA 0.80 MK 0.77 NL 0.85 OV 0.85 ! PT 0.82 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.89 HN 1.19 KP 0.84 ! LA 0.84 MK 0.81 NL 0.90 OV 0.82 ! PT 0.82 SC 1.05 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.11 KP 1.00* ! LA 18.30 MK 0.86 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.157580Jy sigma=0.001681 ! Fit after self-cal, rms=0.139291Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.432 mas, bpa=-2.922 degrees ! Estimated noise=984.217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000719004 Jy ! Component: 100 - total flux cleaned = -0.000810185 Jy ! Component: 150 - total flux cleaned = -0.000773456 Jy ! Component: 200 - total flux cleaned = -0.000738985 Jy ! Total flux subtracted in 200 components = -0.000738985 Jy ! Clean residual min=-0.002997 max=0.003159 Jy/beam ! Clean residual mean=0.000004 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.126143 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.126143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139242Jy sigma=0.000660 ! Fit after self-cal, rms=0.138883Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138883Jy sigma=0.000654 ! Fit after self-cal, rms=0.141125Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=7.415 mas, bpa=-3.25 degrees ! Estimated noise=969.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000791889 Jy ! Component: 100 - total flux cleaned = -0.00076003 Jy ! Component: 150 - total flux cleaned = -0.000732555 Jy ! Component: 200 - total flux cleaned = -0.000733465 Jy ! Total flux subtracted in 200 components = -0.000733465 Jy ! Clean residual min=-0.002811 max=0.002677 Jy/beam ! Clean residual mean=0.000002 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.125409 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.125409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141093Jy sigma=0.000652 ! Fit after self-cal, rms=0.141173Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96307e-05 Jy ! Component: 100 - total flux cleaned = -5.87774e-06 Jy ! Component: 150 - total flux cleaned = 1.56858e-05 Jy ! Component: 200 - total flux cleaned = 1.52205e-05 Jy ! Total flux subtracted in 200 components = 1.52205e-05 Jy ! Clean residual min=-0.002785 max=0.002667 Jy/beam ! Clean residual mean=0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.125425 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.125425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141163Jy sigma=0.000652 ! Fit after self-cal, rms=0.141170Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141170Jy sigma=0.000652 ! Fit after self-cal, rms=0.157389Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.397 mas, bpa=-3.27 degrees ! Estimated noise=967.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322788 Jy ! Component: 100 - total flux cleaned = 0.000322725 Jy ! Component: 150 - total flux cleaned = 0.000323423 Jy ! Component: 200 - total flux cleaned = 0.000305433 Jy ! Total flux subtracted in 200 components = 0.000305433 Jy ! Clean residual min=-0.002674 max=0.002629 Jy/beam ! Clean residual mean=0.000000 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.12573 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.12573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157382Jy sigma=0.000651 ! Fit after self-cal, rms=0.157571Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30979e-05 Jy ! Component: 100 - total flux cleaned = -5.93054e-05 Jy ! Component: 150 - total flux cleaned = -5.92564e-05 Jy ! Component: 200 - total flux cleaned = -7.42037e-05 Jy ! Total flux subtracted in 200 components = -7.42037e-05 Jy ! Clean residual min=-0.002664 max=0.002634 Jy/beam ! Clean residual mean=0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.125656 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.125656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157567Jy sigma=0.000651 ! Fit after self-cal, rms=0.157570Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157570Jy sigma=0.000651 ! Fit after self-cal, rms=0.158206Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=21.98 mas, bpa=5.089 degrees ! Estimated noise=1138.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154855 Jy ! Component: 100 - total flux cleaned = 0.000154003 Jy ! Component: 150 - total flux cleaned = 0.000153601 Jy ! Component: 200 - total flux cleaned = 0.000146403 Jy ! Total flux subtracted in 200 components = 0.000146403 Jy ! Clean residual min=-0.002383 max=0.002760 Jy/beam ! Clean residual mean=-0.000000 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.125802 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.125802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158202Jy sigma=0.000651 ! Fit after self-cal, rms=0.158214Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.81886e-05 Jy ! Component: 100 - total flux cleaned = -4.86936e-05 Jy ! Component: 150 - total flux cleaned = -6.33006e-05 Jy ! Component: 200 - total flux cleaned = -7.67074e-05 Jy ! Total flux subtracted in 200 components = -7.67074e-05 Jy ! Clean residual min=-0.002393 max=0.002768 Jy/beam ! Clean residual mean=-0.000000 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.125726 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.125726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158211Jy sigma=0.000651 ! Fit after self-cal, rms=0.158215Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.378 mas, bpa=-3.271 degrees ! Estimated noise=967.511 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.378 at -3.271 degrees (North through East) ! Clean map min=-0.0025407 max=0.11452 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=6.143 mas, bpa=-4.858 degrees ! Estimated noise=1804.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908964 Jy ! Component: 100 - total flux cleaned = 0.118167 Jy ! Component: 150 - total flux cleaned = 0.126352 Jy ! Component: 200 - total flux cleaned = 0.126355 Jy ! Total flux subtracted in 200 components = 0.126355 Jy ! Clean residual min=-0.005228 max=0.004959 Jy/beam ! Clean residual mean=-0.000002 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.126355 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.126355 Jy ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.378 mas, bpa=-3.271 degrees ! Estimated noise=967.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672098 Jy ! Component: 100 - total flux cleaned = 0.000369045 Jy ! Component: 150 - total flux cleaned = 5.99531e-05 Jy ! Component: 200 - total flux cleaned = -5.60105e-05 Jy ! Total flux subtracted in 200 components = -5.60105e-05 Jy ! Clean residual min=-0.002812 max=0.002730 Jy/beam ! Clean residual mean=0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.126299 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.126299 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=21.98 mas, bpa=5.089 degrees ! Estimated noise=1138.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245609 Jy ! Component: 100 - total flux cleaned = -0.000270864 Jy ! Component: 150 - total flux cleaned = -0.000306981 Jy ! Component: 200 - total flux cleaned = -0.000329112 Jy ! Total flux subtracted in 200 components = -0.000329112 Jy ! Clean residual min=-0.002399 max=0.002749 Jy/beam ! Clean residual mean=0.000000 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.12597 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.1157e-05 Jy ! Component: 100 - total flux cleaned = -4.10626e-05 Jy ! Component: 150 - total flux cleaned = -5.99432e-05 Jy ! Component: 200 - total flux cleaned = -7.7654e-05 Jy ! Total flux subtracted in 200 components = -7.7654e-05 Jy ! Clean residual min=-0.002398 max=0.002739 Jy/beam ! Clean residual mean=0.000000 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.125892 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.125892 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.378 mas, bpa=-3.271 degrees ! Estimated noise=967.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06672e-05 Jy ! Component: 100 - total flux cleaned = -6.61395e-05 Jy ! Component: 150 - total flux cleaned = -4.08979e-05 Jy ! Component: 200 - total flux cleaned = 2.20451e-05 Jy ! Total flux subtracted in 200 components = 2.20451e-05 Jy ! Clean residual min=-0.002764 max=0.002690 Jy/beam ! Clean residual mean=0.000000 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.125914 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.125914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158213Jy sigma=0.000651 ! Fit after self-cal, rms=0.158227Jy sigma=0.000651 wmodel J1441-3303_S_2017_05_01_pus_map.mod ! Writing 32 model components to file: J1441-3303_S_2017_05_01_pus_map.mod wobs J1441-3303_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1441-3303_S_2017_05_01_pus_uvs.fits wwins J1441-3303_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1441-3303_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000506015 Jy ! Component: 100 - total flux cleaned = -0.000957067 Jy ! Component: 150 - total flux cleaned = -0.00137533 Jy ! Component: 200 - total flux cleaned = -0.0016118 Jy ! Component: 250 - total flux cleaned = -0.00183537 Jy ! Component: 300 - total flux cleaned = -0.00204633 Jy ! Component: 350 - total flux cleaned = -0.00208042 Jy ! Component: 400 - total flux cleaned = -0.00214536 Jy ! Component: 450 - total flux cleaned = -0.00217658 Jy ! Component: 500 - total flux cleaned = -0.0021771 Jy ! Component: 550 - total flux cleaned = -0.00229664 Jy ! Component: 600 - total flux cleaned = -0.00226762 Jy ! Component: 650 - total flux cleaned = -0.00229613 Jy ! Component: 700 - total flux cleaned = -0.00221344 Jy ! Component: 750 - total flux cleaned = -0.00221412 Jy ! Component: 800 - total flux cleaned = -0.00221388 Jy ! Component: 850 - total flux cleaned = -0.00218802 Jy ! Component: 900 - total flux cleaned = -0.00216279 Jy ! Component: 950 - total flux cleaned = -0.00211278 Jy ! Component: 1000 - total flux cleaned = -0.00208838 Jy ! Component: 1050 - total flux cleaned = -0.00208813 Jy ! Component: 1100 - total flux cleaned = -0.00201791 Jy ! Component: 1150 - total flux cleaned = -0.00208795 Jy ! Component: 1200 - total flux cleaned = -0.0021105 Jy ! Component: 1250 - total flux cleaned = -0.00213249 Jy ! Component: 1300 - total flux cleaned = -0.00215454 Jy ! Component: 1350 - total flux cleaned = -0.00224181 Jy ! Component: 1400 - total flux cleaned = -0.00230654 Jy ! Component: 1450 - total flux cleaned = -0.00230682 Jy ! Component: 1500 - total flux cleaned = -0.0023906 Jy ! Component: 1550 - total flux cleaned = -0.00247301 Jy ! Component: 1600 - total flux cleaned = -0.00255378 Jy ! Component: 1650 - total flux cleaned = -0.00255334 Jy ! Component: 1700 - total flux cleaned = -0.00261266 Jy ! Component: 1750 - total flux cleaned = -0.00270974 Jy ! Component: 1800 - total flux cleaned = -0.00270954 Jy ! Component: 1850 - total flux cleaned = -0.00274743 Jy ! Component: 1900 - total flux cleaned = -0.00282228 Jy ! Component: 1950 - total flux cleaned = -0.00284065 Jy ! Component: 2000 - total flux cleaned = -0.00287708 Jy ! Component: 2050 - total flux cleaned = -0.00289515 Jy ! Component: 2100 - total flux cleaned = -0.00291313 Jy ! Component: 2150 - total flux cleaned = -0.00296607 Jy ! Component: 2200 - total flux cleaned = -0.00298343 Jy ! Component: 2250 - total flux cleaned = -0.00306991 Jy ! Component: 2300 - total flux cleaned = -0.00306972 Jy ! Component: 2350 - total flux cleaned = -0.00313741 Jy ! Component: 2400 - total flux cleaned = -0.00315408 Jy ! Component: 2450 - total flux cleaned = -0.0031873 Jy ! Component: 2500 - total flux cleaned = -0.00325295 Jy ! Component: 2550 - total flux cleaned = -0.00330193 Jy ! Component: 2600 - total flux cleaned = -0.00333433 Jy ! Component: 2650 - total flux cleaned = -0.0033504 Jy ! Component: 2700 - total flux cleaned = -0.00349319 Jy ! Component: 2750 - total flux cleaned = -0.00354025 Jy ! Component: 2800 - total flux cleaned = -0.00354034 Jy ! Component: 2850 - total flux cleaned = -0.0035869 Jy ! Component: 2900 - total flux cleaned = -0.00367882 Jy ! Component: 2950 - total flux cleaned = -0.00366362 Jy ! Component: 3000 - total flux cleaned = -0.00373885 Jy ! Component: 3050 - total flux cleaned = -0.0037985 Jy ! Component: 3100 - total flux cleaned = -0.00384289 Jy ! Component: 3150 - total flux cleaned = -0.00384293 Jy ! Component: 3200 - total flux cleaned = -0.00387199 Jy ! Component: 3250 - total flux cleaned = -0.0038866 Jy ! Component: 3300 - total flux cleaned = -0.00388652 Jy ! Component: 3350 - total flux cleaned = -0.00387253 Jy ! Component: 3400 - total flux cleaned = -0.00385844 Jy ! Component: 3450 - total flux cleaned = -0.00391486 Jy ! Component: 3500 - total flux cleaned = -0.00391478 Jy ! Component: 3550 - total flux cleaned = -0.00385898 Jy ! Component: 3600 - total flux cleaned = -0.00384501 Jy ! Component: 3650 - total flux cleaned = -0.0037624 Jy ! Component: 3700 - total flux cleaned = -0.00377616 Jy ! Component: 3750 - total flux cleaned = -0.00378976 Jy ! Component: 3800 - total flux cleaned = -0.00377623 Jy ! Component: 3850 - total flux cleaned = -0.00378971 Jy ! Component: 3900 - total flux cleaned = -0.00380308 Jy ! Component: 3950 - total flux cleaned = -0.00384325 Jy ! Component: 4000 - total flux cleaned = -0.0038965 Jy ! Component: 4050 - total flux cleaned = -0.00392286 Jy ! Total flux subtracted in 4096 components = -0.00392286 Jy ! Clean residual min=-0.000766 max=0.000743 Jy/beam ! Clean residual mean=-0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.121991 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 290 components and 0.121991 Jy ![Exited script file: muppet] wmap "J1441-3303_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.378 at -3.271 degrees (North through East) ! Clean map min=-0.0017465 max=0.11334 Jy/beam ! Writing clean map to FITS file: J1441-3303_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113341 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236829 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.626856 0.626856 1.25371 2.50743 5.01485 10.0297 20.0594 40.1188 80.2376 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.378 at -3.271 degrees (North through East) ! Clean map min=-0.0017465 max=0.11334 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1441-3303_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:58 2019