! Started logfile: J1440+0127_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:30 2019 obs J1440+0127_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1440+0127_S_2017_08_12_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.921989 visibilities/baseline/integration-bin. ! Found source: J1440+0127 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 23732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1440+0127_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 984 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959625Jy sigma=0.008223 ! Fit after self-cal, rms=0.940100Jy sigma=0.008073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.043 mas, bpa=-4.073 degrees ! Estimated noise=892.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467998 Jy ! Component: 100 - total flux cleaned = 0.0575355 Jy ! Total flux subtracted in 100 components = 0.0575355 Jy ! Clean residual min=-0.003313 max=0.003904 Jy/beam ! Clean residual mean=0.000006 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0575355 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0575355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083796Jy sigma=0.000678 ! Fit after self-cal, rms=0.083675Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=8.032 mas, bpa=-2.895 degrees ! Estimated noise=645.151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637843 Jy ! Component: 100 - total flux cleaned = 0.00941808 Jy ! Component: 150 - total flux cleaned = 0.0110899 Jy ! Component: 200 - total flux cleaned = 0.0120428 Jy ! Total flux subtracted in 200 components = 0.0120428 Jy ! Clean residual min=-0.002265 max=0.002309 Jy/beam ! Clean residual mean=-0.000003 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0695782 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 52 components and 0.0695783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083192Jy sigma=0.000673 ! Fit after self-cal, rms=0.083199Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.88 HN 1.02 KP 1.06 ! LA 1.01 MK 1.04 NL 0.88 OV 1.03 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.85 HN 1.02 KP 1.01 ! LA 1.00 MK 1.06 NL 1.01 OV 1.06 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 1.04 KP 0.94 ! LA 1.00 MK 1.07 NL 1.00 OV 1.00 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.88 KP 1.00* ! LA 1.00* MK 0.87 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.083199Jy sigma=0.000673 ! Fit after self-cal, rms=0.084160Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.097 mas, bpa=-2.789 degrees ! Estimated noise=656.268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254634 Jy ! Component: 100 - total flux cleaned = 0.000289595 Jy ! Component: 150 - total flux cleaned = 0.000304334 Jy ! Component: 200 - total flux cleaned = 0.000324407 Jy ! Total flux subtracted in 200 components = 0.000324407 Jy ! Clean residual min=-0.002009 max=0.001968 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0699027 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.0699027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084156Jy sigma=0.000673 ! Fit after self-cal, rms=0.084144Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084144Jy sigma=0.000673 ! Fit after self-cal, rms=0.084267Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.107 mas, bpa=-2.794 degrees ! Estimated noise=658.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104894 Jy ! Component: 100 - total flux cleaned = 0.000104232 Jy ! Component: 150 - total flux cleaned = 0.000126579 Jy ! Component: 200 - total flux cleaned = 0.000133556 Jy ! Total flux subtracted in 200 components = 0.000133556 Jy ! Clean residual min=-0.001965 max=0.001537 Jy/beam ! Clean residual mean=0.000001 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0700362 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.0700362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084265Jy sigma=0.000671 ! Fit after self-cal, rms=0.084283Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.60111e-06 Jy ! Component: 100 - total flux cleaned = 2.85033e-05 Jy ! Component: 150 - total flux cleaned = 4.15507e-05 Jy ! Component: 200 - total flux cleaned = 4.15096e-05 Jy ! Total flux subtracted in 200 components = 4.15096e-05 Jy ! Clean residual min=-0.001959 max=0.001582 Jy/beam ! Clean residual mean=0.000001 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0700777 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.0700777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084282Jy sigma=0.000671 ! Fit after self-cal, rms=0.084283Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084283Jy sigma=0.000671 ! Fit after self-cal, rms=0.084601Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.098 mas, bpa=-2.715 degrees ! Estimated noise=658.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18643e-05 Jy ! Component: 100 - total flux cleaned = 1.28957e-05 Jy ! Component: 150 - total flux cleaned = 5.89145e-06 Jy ! Component: 200 - total flux cleaned = -7.53349e-07 Jy ! Total flux subtracted in 200 components = -7.53349e-07 Jy ! Clean residual min=-0.001937 max=0.001602 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.070077 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 67 components and 0.070077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084600Jy sigma=0.000671 ! Fit after self-cal, rms=0.084615Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.48406e-06 Jy ! Component: 100 - total flux cleaned = 1.92545e-06 Jy ! Component: 150 - total flux cleaned = 8.00684e-06 Jy ! Component: 200 - total flux cleaned = 1.38142e-05 Jy ! Total flux subtracted in 200 components = 1.38142e-05 Jy ! Clean residual min=-0.001946 max=0.001594 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0700908 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.0700908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084614Jy sigma=0.000671 ! Fit after self-cal, rms=0.084616Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084616Jy sigma=0.000671 ! Fit after self-cal, rms=0.084642Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=13.13 mas, bpa=-4.124 degrees ! Estimated noise=821.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174032 Jy ! Component: 100 - total flux cleaned = 0.000104168 Jy ! Component: 150 - total flux cleaned = 6.19188e-05 Jy ! Component: 200 - total flux cleaned = 1.66322e-05 Jy ! Total flux subtracted in 200 components = 1.66322e-05 Jy ! Clean residual min=-0.001656 max=0.001890 Jy/beam ! Clean residual mean=-0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0701074 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 0.0701074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084648Jy sigma=0.000671 ! Fit after self-cal, rms=0.084647Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44955e-05 Jy ! Component: 100 - total flux cleaned = -5.20251e-05 Jy ! Component: 150 - total flux cleaned = -9.85141e-05 Jy ! Component: 200 - total flux cleaned = -0.000126433 Jy ! Total flux subtracted in 200 components = -0.000126433 Jy ! Clean residual min=-0.001664 max=0.001888 Jy/beam ! Clean residual mean=-0.000000 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.069981 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.069981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084653Jy sigma=0.000671 ! Fit after self-cal, rms=0.084650Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.092 mas, bpa=-2.628 degrees ! Estimated noise=658.315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.092 at -2.628 degrees (North through East) ! Clean map min=-0.0018488 max=0.062713 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.118 mas, bpa=-4.158 degrees ! Estimated noise=961.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481944 Jy ! Component: 100 - total flux cleaned = 0.0590464 Jy ! Component: 150 - total flux cleaned = 0.0628683 Jy ! Component: 200 - total flux cleaned = 0.0650872 Jy ! Total flux subtracted in 200 components = 0.0650872 Jy ! Clean residual min=-0.002419 max=0.002324 Jy/beam ! Clean residual mean=0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0650872 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0650872 Jy ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.092 mas, bpa=-2.628 degrees ! Estimated noise=658.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273145 Jy ! Component: 100 - total flux cleaned = 0.00421902 Jy ! Component: 150 - total flux cleaned = 0.00481501 Jy ! Component: 200 - total flux cleaned = 0.00519646 Jy ! Total flux subtracted in 200 components = 0.00519646 Jy ! Clean residual min=-0.001903 max=0.001495 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0702836 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.0702836 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=13.13 mas, bpa=-4.124 degrees ! Estimated noise=821.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413561 Jy ! Component: 100 - total flux cleaned = 0.000414181 Jy ! Component: 150 - total flux cleaned = 0.000365928 Jy ! Component: 200 - total flux cleaned = 0.000344999 Jy ! Total flux subtracted in 200 components = 0.000344999 Jy ! Clean residual min=-0.001626 max=0.001692 Jy/beam ! Clean residual mean=-0.000000 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0706286 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.88389e-05 Jy ! Component: 100 - total flux cleaned = -2.73292e-05 Jy ! Component: 150 - total flux cleaned = -5.11106e-05 Jy ! Component: 200 - total flux cleaned = -6.61652e-05 Jy ! Total flux subtracted in 200 components = -6.61652e-05 Jy ! Clean residual min=-0.001630 max=0.001686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0705625 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 92 components and 0.0705625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.092 mas, bpa=-2.628 degrees ! Estimated noise=658.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.8173e-05 Jy ! Component: 100 - total flux cleaned = 0.000139551 Jy ! Component: 150 - total flux cleaned = 0.000140328 Jy ! Component: 200 - total flux cleaned = 0.000127613 Jy ! Total flux subtracted in 200 components = 0.000127613 Jy ! Clean residual min=-0.001828 max=0.001488 Jy/beam ! Clean residual mean=-0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0706901 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.0706901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084618Jy sigma=0.000671 ! Fit after self-cal, rms=0.084599Jy sigma=0.000671 wmodel J1440+0127_S_2017_08_12_pus_map.mod ! Writing 105 model components to file: J1440+0127_S_2017_08_12_pus_map.mod wobs J1440+0127_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1440+0127_S_2017_08_12_pus_uvs.fits wwins J1440+0127_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1440+0127_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518548 Jy ! Component: 100 - total flux cleaned = -0.0008685 Jy ! Component: 150 - total flux cleaned = -0.00124873 Jy ! Component: 200 - total flux cleaned = -0.00156409 Jy ! Component: 250 - total flux cleaned = -0.00179721 Jy ! Component: 300 - total flux cleaned = -0.00193306 Jy ! Component: 350 - total flux cleaned = -0.00204333 Jy ! Component: 400 - total flux cleaned = -0.00215029 Jy ! Component: 450 - total flux cleaned = -0.0022338 Jy ! Component: 500 - total flux cleaned = -0.00227492 Jy ! Component: 550 - total flux cleaned = -0.00231536 Jy ! Component: 600 - total flux cleaned = -0.00237448 Jy ! Component: 650 - total flux cleaned = -0.00250959 Jy ! Component: 700 - total flux cleaned = -0.00258496 Jy ! Component: 750 - total flux cleaned = -0.00265968 Jy ! Component: 800 - total flux cleaned = -0.00278838 Jy ! Component: 850 - total flux cleaned = -0.00286064 Jy ! Component: 900 - total flux cleaned = -0.00293202 Jy ! Component: 950 - total flux cleaned = -0.00303799 Jy ! Component: 1000 - total flux cleaned = -0.00309023 Jy ! Component: 1050 - total flux cleaned = -0.0032106 Jy ! Component: 1100 - total flux cleaned = -0.00326167 Jy ! Component: 1150 - total flux cleaned = -0.00332867 Jy ! Component: 1200 - total flux cleaned = -0.00337853 Jy ! Component: 1250 - total flux cleaned = -0.00346046 Jy ! Component: 1300 - total flux cleaned = -0.00352494 Jy ! Component: 1350 - total flux cleaned = -0.0036045 Jy ! Component: 1400 - total flux cleaned = -0.00366763 Jy ! Component: 1450 - total flux cleaned = -0.00369878 Jy ! Component: 1500 - total flux cleaned = -0.00379137 Jy ! Component: 1550 - total flux cleaned = -0.00382165 Jy ! Component: 1600 - total flux cleaned = -0.00385167 Jy ! Component: 1650 - total flux cleaned = -0.00389655 Jy ! Component: 1700 - total flux cleaned = -0.00392612 Jy ! Component: 1750 - total flux cleaned = -0.00399912 Jy ! Component: 1800 - total flux cleaned = -0.00398469 Jy ! Component: 1850 - total flux cleaned = -0.00402759 Jy ! Component: 1900 - total flux cleaned = -0.0040844 Jy ! Component: 1950 - total flux cleaned = -0.00411248 Jy ! Component: 2000 - total flux cleaned = -0.0041403 Jy ! Component: 2050 - total flux cleaned = -0.00412646 Jy ! Component: 2100 - total flux cleaned = -0.0041677 Jy ! Component: 2150 - total flux cleaned = -0.00422196 Jy ! Component: 2200 - total flux cleaned = -0.00418166 Jy ! Component: 2250 - total flux cleaned = -0.00426178 Jy ! Component: 2300 - total flux cleaned = -0.00419544 Jy ! Component: 2350 - total flux cleaned = -0.00412976 Jy ! Component: 2400 - total flux cleaned = -0.00415569 Jy ! Component: 2450 - total flux cleaned = -0.00410376 Jy ! Component: 2500 - total flux cleaned = -0.00412937 Jy ! Component: 2550 - total flux cleaned = -0.00410381 Jy ! Component: 2600 - total flux cleaned = -0.00406596 Jy ! Component: 2650 - total flux cleaned = -0.00405341 Jy ! Component: 2700 - total flux cleaned = -0.0040161 Jy ! Component: 2750 - total flux cleaned = -0.00402828 Jy ! Component: 2800 - total flux cleaned = -0.00397938 Jy ! Component: 2850 - total flux cleaned = -0.00391878 Jy ! Component: 2900 - total flux cleaned = -0.00395488 Jy ! Component: 2950 - total flux cleaned = -0.00394298 Jy ! Component: 3000 - total flux cleaned = -0.0039074 Jy ! Component: 3050 - total flux cleaned = -0.00387224 Jy ! Component: 3100 - total flux cleaned = -0.00387235 Jy ! Component: 3150 - total flux cleaned = -0.00387229 Jy ! Component: 3200 - total flux cleaned = -0.00383775 Jy ! Component: 3250 - total flux cleaned = -0.00378066 Jy ! Component: 3300 - total flux cleaned = -0.00379217 Jy ! Component: 3350 - total flux cleaned = -0.00375835 Jy ! Component: 3400 - total flux cleaned = -0.00372473 Jy ! Component: 3450 - total flux cleaned = -0.00373588 Jy ! Component: 3500 - total flux cleaned = -0.00370275 Jy ! Component: 3550 - total flux cleaned = -0.00369181 Jy ! Component: 3600 - total flux cleaned = -0.00365906 Jy ! Component: 3650 - total flux cleaned = -0.00365915 Jy ! Component: 3700 - total flux cleaned = -0.00365904 Jy ! Component: 3750 - total flux cleaned = -0.00368041 Jy ! Component: 3800 - total flux cleaned = -0.00363798 Jy ! Component: 3850 - total flux cleaned = -0.00369081 Jy ! Component: 3900 - total flux cleaned = -0.00368021 Jy ! Component: 3950 - total flux cleaned = -0.00368022 Jy ! Component: 4000 - total flux cleaned = -0.00366983 Jy ! Component: 4050 - total flux cleaned = -0.00368004 Jy ! Total flux subtracted in 4096 components = -0.00370057 Jy ! Clean residual min=-0.000666 max=0.000608 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0669895 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 402 components and 0.0669895 Jy ![Exited script file: muppet] wmap "J1440+0127_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.092 at -2.628 degrees (North through East) ! Clean map min=-0.0013322 max=0.062785 Jy/beam ! Writing clean map to FITS file: J1440+0127_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0627852 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191973 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.917287 0.917287 1.83457 3.66915 7.3383 14.6766 29.3532 58.7064 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.092 at -2.628 degrees (North through East) ! Clean map min=-0.0013322 max=0.062785 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1440+0127_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:01:34 2019