! Started logfile: J1439+4958_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:18 2019 obs J1439+4958_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1439+4958_S_2017_01_21_pus_uva.fits ! AN table 1: 136 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.586193 visibilities/baseline/integration-bin. ! Found source: J1439+4958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1439+4958_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 542 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.860697Jy sigma=0.006667 ! Fit after self-cal, rms=0.842697Jy sigma=0.006552 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=3.959 mas, bpa=-2.159 degrees ! Estimated noise=1383.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130279 Jy ! Component: 100 - total flux cleaned = 0.158689 Jy ! Total flux subtracted in 100 components = 0.158689 Jy ! Clean residual min=-0.005465 max=0.009808 Jy/beam ! Clean residual mean=0.000000 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.158689 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.158689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100892Jy sigma=0.000667 ! Fit after self-cal, rms=0.100883Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=4.949 mas, bpa=0.8333 degrees ! Estimated noise=924.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691206 Jy ! Component: 100 - total flux cleaned = 0.00648525 Jy ! Component: 150 - total flux cleaned = 0.00633348 Jy ! Component: 200 - total flux cleaned = 0.00638547 Jy ! Total flux subtracted in 200 components = 0.00638547 Jy ! Clean residual min=-0.004082 max=0.006443 Jy/beam ! Clean residual mean=-0.000011 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.165074 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.165074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100766Jy sigma=0.000660 ! Fit after self-cal, rms=0.100759Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.94 LA 1.03 ! MK 0.96 NL 0.95 OV 1.15 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.96 LA 1.00 ! MK 0.97 NL 0.96 OV 1.19 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 LA 0.98 ! MK 0.99 NL 0.94 OV 1.10 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 LA 1.08 ! MK 1.11 NL 1.00* OV 1.10 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.100759Jy sigma=0.000660 ! Fit after self-cal, rms=0.103805Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=4.913 mas, bpa=0.8697 degrees ! Estimated noise=914.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188657 Jy ! Component: 100 - total flux cleaned = 0.000107704 Jy ! Component: 150 - total flux cleaned = 0.000274657 Jy ! Component: 200 - total flux cleaned = 0.000455319 Jy ! Total flux subtracted in 200 components = 0.000455319 Jy ! Clean residual min=-0.004836 max=0.004580 Jy/beam ! Clean residual mean=-0.000002 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.165529 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.165529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103708Jy sigma=0.000654 ! Fit after self-cal, rms=0.103928Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103928Jy sigma=0.000654 ! Fit after self-cal, rms=0.123871Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=4.93 mas, bpa=0.5619 degrees ! Estimated noise=918.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716618 Jy ! Component: 100 - total flux cleaned = 0.000720861 Jy ! Component: 150 - total flux cleaned = 0.000721347 Jy ! Component: 200 - total flux cleaned = 0.000742537 Jy ! Total flux subtracted in 200 components = 0.000742537 Jy ! Clean residual min=-0.002341 max=0.002227 Jy/beam ! Clean residual mean=-0.000015 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.166272 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.166272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123832Jy sigma=0.000644 ! Fit after self-cal, rms=0.124263Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017821 Jy ! Component: 100 - total flux cleaned = 0.000158717 Jy ! Component: 150 - total flux cleaned = 0.000124915 Jy ! Component: 200 - total flux cleaned = 9.50955e-05 Jy ! Total flux subtracted in 200 components = 9.50955e-05 Jy ! Clean residual min=-0.002381 max=0.002247 Jy/beam ! Clean residual mean=-0.000015 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.166367 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.166367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124250Jy sigma=0.000644 ! Fit after self-cal, rms=0.124256Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124256Jy sigma=0.000644 ! Fit after self-cal, rms=0.125780Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=4.929 mas, bpa=0.8233 degrees ! Estimated noise=919.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662285 Jy ! Component: 100 - total flux cleaned = 0.00065995 Jy ! Component: 150 - total flux cleaned = 0.000642346 Jy ! Component: 200 - total flux cleaned = 0.000642581 Jy ! Total flux subtracted in 200 components = 0.000642581 Jy ! Clean residual min=-0.002382 max=0.002280 Jy/beam ! Clean residual mean=-0.000013 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.16701 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.16701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125763Jy sigma=0.000644 ! Fit after self-cal, rms=0.125780Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105155 Jy ! Component: 100 - total flux cleaned = 0.000105282 Jy ! Component: 150 - total flux cleaned = 7.8071e-05 Jy ! Component: 200 - total flux cleaned = 5.37396e-05 Jy ! Total flux subtracted in 200 components = 5.37396e-05 Jy ! Clean residual min=-0.002389 max=0.002271 Jy/beam ! Clean residual mean=-0.000013 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.167063 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.167063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125771Jy sigma=0.000644 ! Fit after self-cal, rms=0.125776Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125776Jy sigma=0.000644 ! Fit after self-cal, rms=0.126234Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.899 mas, bmaj=8.446 mas, bpa=26.04 degrees ! Estimated noise=1209.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111839 Jy ! Component: 100 - total flux cleaned = 0.00133013 Jy ! Component: 150 - total flux cleaned = 0.00132084 Jy ! Component: 200 - total flux cleaned = 0.0013211 Jy ! Total flux subtracted in 200 components = 0.0013211 Jy ! Clean residual min=-0.002346 max=0.002155 Jy/beam ! Clean residual mean=-0.000027 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.168385 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.168385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126231Jy sigma=0.000644 ! Fit after self-cal, rms=0.126227Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.68108e-05 Jy ! Component: 100 - total flux cleaned = 8.68178e-05 Jy ! Component: 150 - total flux cleaned = 7.80508e-05 Jy ! Component: 200 - total flux cleaned = 7.04601e-05 Jy ! Total flux subtracted in 200 components = 7.04601e-05 Jy ! Clean residual min=-0.002324 max=0.002152 Jy/beam ! Clean residual mean=-0.000026 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.168455 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.168455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126228Jy sigma=0.000644 ! Fit after self-cal, rms=0.126227Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=4.928 mas, bpa=0.9485 degrees ! Estimated noise=920.711 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 4.928 at 0.9485 degrees (North through East) ! Clean map min=-0.0022649 max=0.16657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=3.944 mas, bpa=-3.024 degrees ! Estimated noise=1388.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130097 Jy ! Component: 100 - total flux cleaned = 0.158474 Jy ! Component: 150 - total flux cleaned = 0.164984 Jy ! Component: 200 - total flux cleaned = 0.16571 Jy ! Total flux subtracted in 200 components = 0.16571 Jy ! Clean residual min=-0.003092 max=0.003139 Jy/beam ! Clean residual mean=-0.000003 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.16571 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.16571 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=4.928 mas, bpa=0.9485 degrees ! Estimated noise=920.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001486 Jy ! Component: 100 - total flux cleaned = 0.00168559 Jy ! Component: 150 - total flux cleaned = 0.00180589 Jy ! Component: 200 - total flux cleaned = 0.00183116 Jy ! Total flux subtracted in 200 components = 0.00183116 Jy ! Clean residual min=-0.002360 max=0.002330 Jy/beam ! Clean residual mean=-0.000013 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.167541 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.167541 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.899 mas, bmaj=8.446 mas, bpa=26.04 degrees ! Estimated noise=1209.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801517 Jy ! Component: 100 - total flux cleaned = 0.000818108 Jy ! Component: 150 - total flux cleaned = 0.000830599 Jy ! Component: 200 - total flux cleaned = 0.000830226 Jy ! Total flux subtracted in 200 components = 0.000830226 Jy ! Clean residual min=-0.002306 max=0.002167 Jy/beam ! Clean residual mean=-0.000027 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.168372 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.74099e-06 Jy ! Component: 100 - total flux cleaned = -1.68629e-05 Jy ! Component: 150 - total flux cleaned = -1.7228e-05 Jy ! Component: 200 - total flux cleaned = -2.4385e-05 Jy ! Total flux subtracted in 200 components = -2.4385e-05 Jy ! Clean residual min=-0.002321 max=0.002147 Jy/beam ! Clean residual mean=-0.000027 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.168347 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.168347 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=4.928 mas, bpa=0.9485 degrees ! Estimated noise=920.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364369 Jy ! Component: 100 - total flux cleaned = -0.000383917 Jy ! Component: 150 - total flux cleaned = -0.00042116 Jy ! Component: 200 - total flux cleaned = -0.000469971 Jy ! Total flux subtracted in 200 components = -0.000469971 Jy ! Clean residual min=-0.002358 max=0.002275 Jy/beam ! Clean residual mean=-0.000012 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.167877 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.167877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126232Jy sigma=0.000644 ! Fit after self-cal, rms=0.126234Jy sigma=0.000644 wmodel J1439+4958_S_2017_01_21_pus_map.mod ! Writing 34 model components to file: J1439+4958_S_2017_01_21_pus_map.mod wobs J1439+4958_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1439+4958_S_2017_01_21_pus_uvs.fits wwins J1439+4958_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1439+4958_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.64159e-05 Jy ! Component: 100 - total flux cleaned = 1.8722e-05 Jy ! Component: 150 - total flux cleaned = -1.66159e-05 Jy ! Component: 200 - total flux cleaned = 0.000120534 Jy ! Component: 250 - total flux cleaned = 0.000185994 Jy ! Component: 300 - total flux cleaned = 0.00021798 Jy ! Component: 350 - total flux cleaned = 0.000157384 Jy ! Component: 400 - total flux cleaned = 9.9065e-05 Jy ! Component: 450 - total flux cleaned = 7.01946e-05 Jy ! Component: 500 - total flux cleaned = -0.000129493 Jy ! Component: 550 - total flux cleaned = -0.00038086 Jy ! Component: 600 - total flux cleaned = -0.000545733 Jy ! Component: 650 - total flux cleaned = -0.00073437 Jy ! Component: 700 - total flux cleaned = -0.000893023 Jy ! Component: 750 - total flux cleaned = -0.00104914 Jy ! Component: 800 - total flux cleaned = -0.00122868 Jy ! Component: 850 - total flux cleaned = -0.00132954 Jy ! Component: 900 - total flux cleaned = -0.00142954 Jy ! Component: 950 - total flux cleaned = -0.00147881 Jy ! Component: 1000 - total flux cleaned = -0.00159995 Jy ! Component: 1050 - total flux cleaned = -0.00164792 Jy ! Component: 1100 - total flux cleaned = -0.00174258 Jy ! Component: 1150 - total flux cleaned = -0.00181292 Jy ! Component: 1200 - total flux cleaned = -0.00192817 Jy ! Component: 1250 - total flux cleaned = -0.00201915 Jy ! Component: 1300 - total flux cleaned = -0.00204182 Jy ! Component: 1350 - total flux cleaned = -0.00213056 Jy ! Component: 1400 - total flux cleaned = -0.00213056 Jy ! Component: 1450 - total flux cleaned = -0.00219551 Jy ! Component: 1500 - total flux cleaned = -0.00225985 Jy ! Component: 1550 - total flux cleaned = -0.00225988 Jy ! Component: 1600 - total flux cleaned = -0.00232278 Jy ! Component: 1650 - total flux cleaned = -0.00240559 Jy ! Component: 1700 - total flux cleaned = -0.0023233 Jy ! Component: 1750 - total flux cleaned = -0.0023643 Jy ! Component: 1800 - total flux cleaned = -0.00242445 Jy ! Component: 1850 - total flux cleaned = -0.0024044 Jy ! Component: 1900 - total flux cleaned = -0.0023651 Jy ! Component: 1950 - total flux cleaned = -0.00242371 Jy ! Component: 2000 - total flux cleaned = -0.00240415 Jy ! Component: 2050 - total flux cleaned = -0.00244241 Jy ! Component: 2100 - total flux cleaned = -0.00246129 Jy ! Component: 2150 - total flux cleaned = -0.00248002 Jy ! Component: 2200 - total flux cleaned = -0.00246175 Jy ! Component: 2250 - total flux cleaned = -0.00255411 Jy ! Component: 2300 - total flux cleaned = -0.00255404 Jy ! Component: 2350 - total flux cleaned = -0.00253583 Jy ! Component: 2400 - total flux cleaned = -0.00258992 Jy ! Component: 2450 - total flux cleaned = -0.00266119 Jy ! Component: 2500 - total flux cleaned = -0.0026787 Jy ! Component: 2550 - total flux cleaned = -0.00266102 Jy ! Component: 2600 - total flux cleaned = -0.00262623 Jy ! Component: 2650 - total flux cleaned = -0.00267815 Jy ! Component: 2700 - total flux cleaned = -0.00266104 Jy ! Component: 2750 - total flux cleaned = -0.00267807 Jy ! Component: 2800 - total flux cleaned = -0.00274587 Jy ! Component: 2850 - total flux cleaned = -0.00271208 Jy ! Component: 2900 - total flux cleaned = -0.00274549 Jy ! Component: 2950 - total flux cleaned = -0.00271228 Jy ! Component: 3000 - total flux cleaned = -0.00276173 Jy ! Component: 3050 - total flux cleaned = -0.00281084 Jy ! Component: 3100 - total flux cleaned = -0.00287586 Jy ! Component: 3150 - total flux cleaned = -0.0028758 Jy ! Component: 3200 - total flux cleaned = -0.00287596 Jy ! Component: 3250 - total flux cleaned = -0.00297179 Jy ! Component: 3300 - total flux cleaned = -0.00301945 Jy ! Component: 3350 - total flux cleaned = -0.00309818 Jy ! Component: 3400 - total flux cleaned = -0.00317651 Jy ! Component: 3450 - total flux cleaned = -0.00316097 Jy ! Component: 3500 - total flux cleaned = -0.00323844 Jy ! Component: 3550 - total flux cleaned = -0.00323839 Jy ! Component: 3600 - total flux cleaned = -0.00329966 Jy ! Component: 3650 - total flux cleaned = -0.00339092 Jy ! Component: 3700 - total flux cleaned = -0.00348161 Jy ! Component: 3750 - total flux cleaned = -0.00352662 Jy ! Component: 3800 - total flux cleaned = -0.00357142 Jy ! Component: 3850 - total flux cleaned = -0.00357132 Jy ! Component: 3900 - total flux cleaned = -0.00367486 Jy ! Component: 3950 - total flux cleaned = -0.0037484 Jy ! Component: 4000 - total flux cleaned = -0.00380694 Jy ! Component: 4050 - total flux cleaned = -0.00386525 Jy ! Total flux subtracted in 4096 components = -0.00396666 Jy ! Clean residual min=-0.001035 max=0.000892 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.163911 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 310 components and 0.163911 Jy ![Exited script file: muppet] wmap "J1439+4958_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 4.928 at 0.9485 degrees (North through East) ! Clean map min=-0.0021413 max=0.16651 Jy/beam ! Writing clean map to FITS file: J1439+4958_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.166507 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252937 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.455724 0.455724 0.911448 1.8229 3.64579 7.29158 14.5832 29.1663 58.3327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.166 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 4.928 at 0.9485 degrees (North through East) ! Clean map min=-0.0021413 max=0.16651 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1439+4958_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:23 2019