! Started logfile: J1438+6211_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:15 2019 obs J1438+6211_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1438+6211_S_2017_07_09_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976845 visibilities/baseline/integration-bin. ! Found source: J1438+6211 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1438+6211_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 794 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.754467Jy sigma=0.006863 ! Fit after self-cal, rms=0.724608Jy sigma=0.006568 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=3.539 mas, bpa=3.734 degrees ! Estimated noise=992.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26573 Jy ! Component: 100 - total flux cleaned = 0.40107 Jy ! Total flux subtracted in 100 components = 0.40107 Jy ! Clean residual min=-0.044183 max=0.106189 Jy/beam ! Clean residual mean=-0.000052 rms=0.015263 Jy/beam ! Combined flux in latest and established models = 0.40107 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.40107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412635Jy sigma=0.003787 ! Fit after self-cal, rms=0.411314Jy sigma=0.003776 ! Inverting map ! Added new window around map position (19.5, -102.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115152 Jy ! Component: 100 - total flux cleaned = 0.201021 Jy ! Total flux subtracted in 100 components = 0.201021 Jy ! Clean residual min=-0.041873 max=0.075362 Jy/beam ! Clean residual mean=-0.000037 rms=0.013075 Jy/beam ! Combined flux in latest and established models = 0.602091 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.602091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347512Jy sigma=0.003192 ! Fit after self-cal, rms=0.341578Jy sigma=0.003146 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920433 Jy ! Component: 100 - total flux cleaned = 0.155778 Jy ! Total flux subtracted in 100 components = 0.155778 Jy ! Clean residual min=-0.036009 max=0.078099 Jy/beam ! Clean residual mean=-0.000039 rms=0.011192 Jy/beam ! Combined flux in latest and established models = 0.757869 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.757869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295538Jy sigma=0.002731 ! Fit after self-cal, rms=0.291017Jy sigma=0.002696 ! Inverting map ! Added new window around map position (-3.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.081467 Jy ! Component: 100 - total flux cleaned = 0.134931 Jy ! Total flux subtracted in 100 components = 0.134931 Jy ! Clean residual min=-0.034820 max=0.060709 Jy/beam ! Clean residual mean=0.000017 rms=0.009677 Jy/beam ! Combined flux in latest and established models = 0.8928 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.8928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251386Jy sigma=0.002330 ! Fit after self-cal, rms=0.247635Jy sigma=0.002299 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.064 mas, bmaj=4.347 mas, bpa=9.264 degrees ! Estimated noise=554.778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0978507 Jy ! Component: 100 - total flux cleaned = 0.167164 Jy ! Component: 150 - total flux cleaned = 0.221479 Jy ! Component: 200 - total flux cleaned = 0.264838 Jy ! Total flux subtracted in 200 components = 0.264838 Jy ! Clean residual min=-0.034224 max=0.044083 Jy/beam ! Clean residual mean=0.000117 rms=0.009483 Jy/beam ! Combined flux in latest and established models = 1.15764 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 128 components and 1.15764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191926Jy sigma=0.001750 ! Fit after self-cal, rms=0.187682Jy sigma=0.001711 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.88 HN 1.15 KP 0.96 ! LA 0.92 MK 1.06 NL 0.92 OV 1.02 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.21 KP 0.94 ! LA 0.89 MK 1.08 NL 1.03 OV 1.01 ! PT 0.88 SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.27 KP 0.95 ! LA 0.91 MK 1.19 NL 1.03 OV 0.95 ! PT 0.91 SC 1.16 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.39 KP 1.00* ! LA 1.07 MK 0.82 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.187682Jy sigma=0.001711 ! Fit after self-cal, rms=0.177052Jy sigma=0.001549 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=4.559 mas, bpa=9.734 degrees ! Estimated noise=558.989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378244 Jy ! Component: 100 - total flux cleaned = 0.00717567 Jy ! Component: 150 - total flux cleaned = 0.0113396 Jy ! Component: 200 - total flux cleaned = 0.0148722 Jy ! Total flux subtracted in 200 components = 0.0148722 Jy ! Clean residual min=-0.030144 max=0.031343 Jy/beam ! Clean residual mean=0.000161 rms=0.007301 Jy/beam ! Combined flux in latest and established models = 1.17251 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 139 components and 1.17251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169216Jy sigma=0.001470 ! Fit after self-cal, rms=0.165875Jy sigma=0.001441 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165875Jy sigma=0.001441 ! Fit after self-cal, rms=0.161652Jy sigma=0.001344 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=4.492 mas, bpa=18.47 degrees ! Estimated noise=550.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399641 Jy ! Component: 100 - total flux cleaned = 0.00931468 Jy ! Component: 150 - total flux cleaned = 0.0126018 Jy ! Component: 200 - total flux cleaned = 0.0154858 Jy ! Total flux subtracted in 200 components = 0.0154858 Jy ! Clean residual min=-0.025213 max=0.025653 Jy/beam ! Clean residual mean=0.000024 rms=0.005801 Jy/beam ! Combined flux in latest and established models = 1.188 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 151 components and 1.188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155753Jy sigma=0.001280 ! Fit after self-cal, rms=0.152940Jy sigma=0.001261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109598 Jy ! Component: 100 - total flux cleaned = 0.0142167 Jy ! Component: 150 - total flux cleaned = 0.0149644 Jy ! Component: 200 - total flux cleaned = 0.0137547 Jy ! Total flux subtracted in 200 components = 0.0137547 Jy ! Clean residual min=-0.022070 max=0.023082 Jy/beam ! Clean residual mean=0.000016 rms=0.005173 Jy/beam ! Combined flux in latest and established models = 1.20175 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 1.20175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144677Jy sigma=0.001183 ! Fit after self-cal, rms=0.141495Jy sigma=0.001164 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141495Jy sigma=0.001164 ! Fit after self-cal, rms=0.127959Jy sigma=0.001142 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=4.485 mas, bpa=6.767 degrees ! Estimated noise=536.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265885 Jy ! Component: 100 - total flux cleaned = 0.00764903 Jy ! Component: 150 - total flux cleaned = 0.0106913 Jy ! Component: 200 - total flux cleaned = 0.0106928 Jy ! Total flux subtracted in 200 components = 0.0106928 Jy ! Clean residual min=-0.018170 max=0.018510 Jy/beam ! Clean residual mean=0.000016 rms=0.004262 Jy/beam ! Combined flux in latest and established models = 1.21244 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 181 components and 1.21244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121468Jy sigma=0.001066 ! Fit after self-cal, rms=0.119681Jy sigma=0.001054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102114 Jy ! Component: 100 - total flux cleaned = 0.0107924 Jy ! Component: 150 - total flux cleaned = 0.011338 Jy ! Component: 200 - total flux cleaned = 0.0113478 Jy ! Total flux subtracted in 200 components = 0.0113478 Jy ! Clean residual min=-0.014792 max=0.016686 Jy/beam ! Clean residual mean=0.000015 rms=0.003796 Jy/beam ! Combined flux in latest and established models = 1.22379 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 197 components and 1.22379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114453Jy sigma=0.000999 ! Fit after self-cal, rms=0.113586Jy sigma=0.000993 ! Inverting map ! Added new window around map position (20, -95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177723 Jy ! Component: 100 - total flux cleaned = 0.0211643 Jy ! Component: 150 - total flux cleaned = 0.0226674 Jy ! Component: 200 - total flux cleaned = 0.023567 Jy ! Total flux subtracted in 200 components = 0.023567 Jy ! Clean residual min=-0.012909 max=0.015030 Jy/beam ! Clean residual mean=-0.000004 rms=0.003295 Jy/beam ! Combined flux in latest and established models = 1.24736 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 222 components and 1.24736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108616Jy sigma=0.000940 ! Fit after self-cal, rms=0.107969Jy sigma=0.000934 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107969Jy sigma=0.000934 ! Fit after self-cal, rms=0.103390Jy sigma=0.000920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.399 mas, bmaj=8.847 mas, bpa=62.22 degrees ! Estimated noise=652.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201281 Jy ! Component: 100 - total flux cleaned = 0.0283818 Jy ! Component: 150 - total flux cleaned = 0.0298462 Jy ! Component: 200 - total flux cleaned = 0.0311029 Jy ! Total flux subtracted in 200 components = 0.0311029 Jy ! Clean residual min=-0.011156 max=0.012711 Jy/beam ! Clean residual mean=-0.000002 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 1.27846 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 270 components and 1.27846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100939Jy sigma=0.000893 ! Fit after self-cal, rms=0.100446Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283398 Jy ! Component: 100 - total flux cleaned = 0.00614105 Jy ! Component: 150 - total flux cleaned = 0.0069548 Jy ! Component: 200 - total flux cleaned = 0.00743481 Jy ! Total flux subtracted in 200 components = 0.00743481 Jy ! Clean residual min=-0.009136 max=0.010979 Jy/beam ! Clean residual mean=-0.000016 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 1.2859 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 297 components and 1.2859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099008Jy sigma=0.000871 ! Fit after self-cal, rms=0.098644Jy sigma=0.000868 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=4.496 mas, bpa=5.488 degrees ! Estimated noise=529.823 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 4.496 at 5.488 degrees (North through East) ! Clean map min=-0.016895 max=0.24724 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=3.659 mas, bpa=2.972 degrees ! Estimated noise=984.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260813 Jy ! Component: 100 - total flux cleaned = 0.438413 Jy ! Component: 150 - total flux cleaned = 0.572098 Jy ! Component: 200 - total flux cleaned = 0.674904 Jy ! Total flux subtracted in 200 components = 0.674904 Jy ! Clean residual min=-0.026165 max=0.060317 Jy/beam ! Clean residual mean=-0.000117 rms=0.009027 Jy/beam ! Combined flux in latest and established models = 0.674904 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.674904 Jy ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=4.496 mas, bpa=5.488 degrees ! Estimated noise=529.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130489 Jy ! Component: 100 - total flux cleaned = 0.225093 Jy ! Component: 150 - total flux cleaned = 0.296839 Jy ! Component: 200 - total flux cleaned = 0.352597 Jy ! Total flux subtracted in 200 components = 0.352597 Jy ! Clean residual min=-0.018322 max=0.033174 Jy/beam ! Clean residual mean=-0.000034 rms=0.006317 Jy/beam ! Combined flux in latest and established models = 1.0275 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 115 components and 1.0275 Jy ! Inverting map ! Added new window around map position (23, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444724 Jy ! Component: 100 - total flux cleaned = 0.0803738 Jy ! Component: 150 - total flux cleaned = 0.109628 Jy ! Component: 200 - total flux cleaned = 0.133901 Jy ! Total flux subtracted in 200 components = 0.133901 Jy ! Clean residual min=-0.012633 max=0.014748 Jy/beam ! Clean residual mean=-0.000023 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 1.1614 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 181 components and 1.1614 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.399 mas, bmaj=8.847 mas, bpa=62.22 degrees ! Estimated noise=652.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353621 Jy ! Component: 100 - total flux cleaned = 0.0594282 Jy ! Component: 150 - total flux cleaned = 0.0771474 Jy ! Component: 200 - total flux cleaned = 0.0906614 Jy ! Total flux subtracted in 200 components = 0.0906614 Jy ! Clean residual min=-0.009676 max=0.010365 Jy/beam ! Clean residual mean=-0.000034 rms=0.003025 Jy/beam ! Combined flux in latest and established models = 1.25206 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104064 Jy ! Component: 100 - total flux cleaned = 0.0184721 Jy ! Component: 150 - total flux cleaned = 0.0247499 Jy ! Component: 200 - total flux cleaned = 0.0285779 Jy ! Total flux subtracted in 200 components = 0.0285779 Jy ! Clean residual min=-0.008742 max=0.008887 Jy/beam ! Clean residual mean=-0.000028 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 1.28064 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 284 components and 1.28064 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=4.496 mas, bpa=5.488 degrees ! Estimated noise=529.823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162159 Jy ! Component: 100 - total flux cleaned = 0.00288322 Jy ! Component: 150 - total flux cleaned = 0.00311052 Jy ! Component: 200 - total flux cleaned = 0.00353435 Jy ! Total flux subtracted in 200 components = 0.00353435 Jy ! Clean residual min=-0.008467 max=0.008917 Jy/beam ! Clean residual mean=-0.000015 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 1.28418 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 316 components and 1.28418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092487Jy sigma=0.000812 ! Fit after self-cal, rms=0.090691Jy sigma=0.000794 wmodel J1438+6211_S_2017_07_09_pus_map.mod ! Writing 316 model components to file: J1438+6211_S_2017_07_09_pus_map.mod wobs J1438+6211_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1438+6211_S_2017_07_09_pus_uvs.fits wwins J1438+6211_S_2017_07_09_pus_map.win ! wwins: Wrote 8 windows to J1438+6211_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118106 Jy ! Component: 100 - total flux cleaned = -0.00091776 Jy ! Component: 150 - total flux cleaned = -5.57821e-06 Jy ! Component: 200 - total flux cleaned = 0.00125335 Jy ! Component: 250 - total flux cleaned = 0.00234362 Jy ! Component: 300 - total flux cleaned = 0.0034005 Jy ! Component: 350 - total flux cleaned = 0.00419692 Jy ! Component: 400 - total flux cleaned = 0.00508272 Jy ! Component: 450 - total flux cleaned = 0.00605057 Jy ! Component: 500 - total flux cleaned = 0.00657345 Jy ! Component: 550 - total flux cleaned = 0.00688195 Jy ! Component: 600 - total flux cleaned = 0.00718211 Jy ! Component: 650 - total flux cleaned = 0.00757357 Jy ! Component: 700 - total flux cleaned = 0.00795767 Jy ! Component: 750 - total flux cleaned = 0.00833548 Jy ! Component: 800 - total flux cleaned = 0.0088925 Jy ! Component: 850 - total flux cleaned = 0.00925518 Jy ! Component: 900 - total flux cleaned = 0.00961425 Jy ! Component: 950 - total flux cleaned = 0.00996762 Jy ! Component: 1000 - total flux cleaned = 0.0103145 Jy ! Component: 1050 - total flux cleaned = 0.0104005 Jy ! Component: 1100 - total flux cleaned = 0.0106542 Jy ! Component: 1150 - total flux cleaned = 0.0109847 Jy ! Component: 1200 - total flux cleaned = 0.0111477 Jy ! Component: 1250 - total flux cleaned = 0.0113076 Jy ! Component: 1300 - total flux cleaned = 0.0113084 Jy ! Component: 1350 - total flux cleaned = 0.0116201 Jy ! Component: 1400 - total flux cleaned = 0.0112353 Jy ! Component: 1450 - total flux cleaned = 0.0113128 Jy ! Component: 1500 - total flux cleaned = 0.0113135 Jy ! Component: 1550 - total flux cleaned = 0.0110929 Jy ! Component: 1600 - total flux cleaned = 0.0112393 Jy ! Component: 1650 - total flux cleaned = 0.0107371 Jy ! Component: 1700 - total flux cleaned = 0.010951 Jy ! Component: 1750 - total flux cleaned = 0.0109495 Jy ! Component: 1800 - total flux cleaned = 0.010603 Jy ! Component: 1850 - total flux cleaned = 0.0103297 Jy ! Component: 1900 - total flux cleaned = 0.0103984 Jy ! Component: 1950 - total flux cleaned = 0.0103302 Jy ! Component: 2000 - total flux cleaned = 0.0105274 Jy ! Component: 2050 - total flux cleaned = 0.0105916 Jy ! Component: 2100 - total flux cleaned = 0.0103329 Jy ! Component: 2150 - total flux cleaned = 0.0103985 Jy ! Component: 2200 - total flux cleaned = 0.0105249 Jy ! Component: 2250 - total flux cleaned = 0.0105253 Jy ! Component: 2300 - total flux cleaned = 0.0105244 Jy ! Component: 2350 - total flux cleaned = 0.0105241 Jy ! Component: 2400 - total flux cleaned = 0.0105248 Jy ! Component: 2450 - total flux cleaned = 0.0105242 Jy ! Component: 2500 - total flux cleaned = 0.0105835 Jy ! Component: 2550 - total flux cleaned = 0.0106416 Jy ! Component: 2600 - total flux cleaned = 0.0102943 Jy ! Component: 2650 - total flux cleaned = 0.0106381 Jy ! Component: 2700 - total flux cleaned = 0.010525 Jy ! Component: 2750 - total flux cleaned = 0.0106381 Jy ! Component: 2800 - total flux cleaned = 0.0104707 Jy ! Component: 2850 - total flux cleaned = 0.0103061 Jy ! Component: 2900 - total flux cleaned = 0.0101967 Jy ! Component: 2950 - total flux cleaned = 0.010359 Jy ! Component: 3000 - total flux cleaned = 0.0103052 Jy ! Component: 3050 - total flux cleaned = 0.0101988 Jy ! Component: 3100 - total flux cleaned = 0.00988388 Jy ! Component: 3150 - total flux cleaned = 0.0098313 Jy ! Component: 3200 - total flux cleaned = 0.00983182 Jy ! Component: 3250 - total flux cleaned = 0.00957742 Jy ! Component: 3300 - total flux cleaned = 0.00967801 Jy ! Component: 3350 - total flux cleaned = 0.00952841 Jy ! Component: 3400 - total flux cleaned = 0.00947853 Jy ! Component: 3450 - total flux cleaned = 0.00947877 Jy ! Component: 3500 - total flux cleaned = 0.00942955 Jy ! Component: 3550 - total flux cleaned = 0.00947807 Jy ! Component: 3600 - total flux cleaned = 0.00957321 Jy ! Component: 3650 - total flux cleaned = 0.00961999 Jy ! Component: 3700 - total flux cleaned = 0.00980808 Jy ! Component: 3750 - total flux cleaned = 0.00994715 Jy ! Component: 3800 - total flux cleaned = 0.0100394 Jy ! Component: 3850 - total flux cleaned = 0.00999383 Jy ! Component: 3900 - total flux cleaned = 0.0102206 Jy ! Component: 3950 - total flux cleaned = 0.0104003 Jy ! Component: 4000 - total flux cleaned = 0.0104006 Jy ! Component: 4050 - total flux cleaned = 0.0104448 Jy ! Total flux subtracted in 4096 components = 0.0105756 Jy ! Clean residual min=-0.002241 max=0.002424 Jy/beam ! Clean residual mean=-0.000013 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 1.29475 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 623 components and 1.29475 Jy ![Exited script file: muppet] wmap "J1438+6211_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 4.496 at 5.488 degrees (North through East) ! Clean map min=-0.0046548 max=0.25669 Jy/beam ! Writing clean map to FITS file: J1438+6211_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256691 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000811402 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9483 0.9483 1.8966 3.7932 7.5864 15.1728 30.3456 60.6912 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 4.496 at 5.488 degrees (North through East) ! Clean map min=-0.0046548 max=0.25669 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1438+6211_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:21 2019