! Started logfile: J1437-2947_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:53 2019 obs J1437-2947_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1437-2947_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.797701 visibilities/baseline/integration-bin. ! Found source: J1437-2947 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1437-2947_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1044 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958975Jy sigma=0.007174 ! Fit after self-cal, rms=0.931664Jy sigma=0.006978 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=14.51 mas, bpa=-18.64 degrees ! Estimated noise=1606.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0521477 Jy ! Component: 100 - total flux cleaned = 0.0669054 Jy ! Total flux subtracted in 100 components = 0.0669054 Jy ! Clean residual min=-0.007310 max=0.009683 Jy/beam ! Clean residual mean=-0.000097 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.0669054 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0669054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109954Jy sigma=0.000752 ! Fit after self-cal, rms=0.109499Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=17.94 mas, bpa=-18.72 degrees ! Estimated noise=932.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129213 Jy ! Component: 100 - total flux cleaned = 0.0199627 Jy ! Component: 150 - total flux cleaned = 0.0242162 Jy ! Component: 200 - total flux cleaned = 0.0268393 Jy ! Total flux subtracted in 200 components = 0.0268393 Jy ! Clean residual min=-0.006454 max=0.012453 Jy/beam ! Clean residual mean=-0.000168 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.0937447 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 79 components and 0.0937447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107935Jy sigma=0.000737 ! Fit after self-cal, rms=0.107918Jy sigma=0.000736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.03 HN 0.87 KP 1.15 ! LA 0.95 MK 1.17 NL 0.99 OV 1.31 ! PT 0.77 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.10 ! LA 0.88 MK 0.97 NL 1.19 OV 1.33 ! PT 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.94 KP 1.20 ! LA 0.71 MK 1.01 NL 1.22 OV 1.21 ! PT 0.75 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.62 KP 1.00* ! LA 0.78 MK 1.00* NL 1.00* OV 1.00* ! PT 0.66 ! ! ! Fit before self-cal, rms=0.107918Jy sigma=0.000736 ! Fit after self-cal, rms=0.109652Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=18.34 mas, bpa=-18.47 degrees ! Estimated noise=944.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0078036 Jy ! Component: 100 - total flux cleaned = 0.00756994 Jy ! Component: 150 - total flux cleaned = 0.007461 Jy ! Component: 200 - total flux cleaned = 0.00746108 Jy ! Total flux subtracted in 200 components = 0.00746108 Jy ! Clean residual min=-0.003223 max=0.005159 Jy/beam ! Clean residual mean=0.000003 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.101206 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 118 components and 0.101206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109020Jy sigma=0.000718 ! Fit after self-cal, rms=0.109729Jy sigma=0.000713 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413652 Jy ! Component: 100 - total flux cleaned = 0.00431996 Jy ! Component: 150 - total flux cleaned = 0.00448112 Jy ! Component: 200 - total flux cleaned = 0.00441696 Jy ! Total flux subtracted in 200 components = 0.00441696 Jy ! Clean residual min=-0.003073 max=0.004423 Jy/beam ! Clean residual mean=-0.000003 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.105623 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 146 components and 0.105623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109478Jy sigma=0.000712 ! Fit after self-cal, rms=0.109376Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109376Jy sigma=0.000711 ! Fit after self-cal, rms=0.110389Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=18.39 mas, bpa=-18.44 degrees ! Estimated noise=938.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226742 Jy ! Component: 100 - total flux cleaned = 0.00182197 Jy ! Component: 150 - total flux cleaned = 0.00152091 Jy ! Component: 200 - total flux cleaned = 0.00136517 Jy ! Total flux subtracted in 200 components = 0.00136517 Jy ! Clean residual min=-0.002760 max=0.003584 Jy/beam ! Clean residual mean=0.000005 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.106988 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 165 components and 0.106988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110252Jy sigma=0.000709 ! Fit after self-cal, rms=0.110331Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907624 Jy ! Component: 100 - total flux cleaned = 0.000593641 Jy ! Component: 150 - total flux cleaned = 0.000382911 Jy ! Component: 200 - total flux cleaned = 0.000285566 Jy ! Total flux subtracted in 200 components = 0.000285566 Jy ! Clean residual min=-0.002700 max=0.003210 Jy/beam ! Clean residual mean=0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.107274 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 182 components and 0.107274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110241Jy sigma=0.000708 ! Fit after self-cal, rms=0.110166Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110166Jy sigma=0.000708 ! Fit after self-cal, rms=0.110538Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=18.45 mas, bpa=-18.36 degrees ! Estimated noise=935.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870546 Jy ! Component: 100 - total flux cleaned = 0.000591112 Jy ! Component: 150 - total flux cleaned = 0.000392383 Jy ! Component: 200 - total flux cleaned = 0.000299906 Jy ! Total flux subtracted in 200 components = 0.000299906 Jy ! Clean residual min=-0.002491 max=0.003049 Jy/beam ! Clean residual mean=0.000003 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.107573 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 201 components and 0.107573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110466Jy sigma=0.000708 ! Fit after self-cal, rms=0.110481Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177583 Jy ! Component: 100 - total flux cleaned = 3.43227e-05 Jy ! Component: 150 - total flux cleaned = -9.2048e-06 Jy ! Component: 200 - total flux cleaned = -5.09691e-05 Jy ! Total flux subtracted in 200 components = -5.09691e-05 Jy ! Clean residual min=-0.002416 max=0.002987 Jy/beam ! Clean residual mean=0.000003 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.107522 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 211 components and 0.107522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110431Jy sigma=0.000707 ! Fit after self-cal, rms=0.110417Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110417Jy sigma=0.000707 ! Fit after self-cal, rms=0.110292Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.236 mas, bmaj=33.13 mas, bpa=-5.516 degrees ! Estimated noise=1067.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120364 Jy ! Component: 100 - total flux cleaned = 0.000167215 Jy ! Component: 150 - total flux cleaned = 0.000170072 Jy ! Component: 200 - total flux cleaned = 0.000140088 Jy ! Total flux subtracted in 200 components = 0.000140088 Jy ! Clean residual min=-0.002853 max=0.003771 Jy/beam ! Clean residual mean=0.000006 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.107663 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 228 components and 0.107663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110266Jy sigma=0.000707 ! Fit after self-cal, rms=0.110255Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23143e-06 Jy ! Component: 100 - total flux cleaned = -6.65655e-05 Jy ! Component: 150 - total flux cleaned = -9.62928e-05 Jy ! Component: 200 - total flux cleaned = -0.000151303 Jy ! Total flux subtracted in 200 components = -0.000151303 Jy ! Clean residual min=-0.002753 max=0.003763 Jy/beam ! Clean residual mean=0.000004 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.107511 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 231 components and 0.107511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110237Jy sigma=0.000707 ! Fit after self-cal, rms=0.110215Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=18.47 mas, bpa=-18.29 degrees ! Estimated noise=931.977 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 18.47 at -18.29 degrees (North through East) ! Clean map min=-0.0031764 max=0.064713 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=14.97 mas, bpa=-18.03 degrees ! Estimated noise=1640 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489194 Jy ! Component: 100 - total flux cleaned = 0.0676288 Jy ! Component: 150 - total flux cleaned = 0.0799817 Jy ! Component: 200 - total flux cleaned = 0.0867743 Jy ! Total flux subtracted in 200 components = 0.0867743 Jy ! Clean residual min=-0.007385 max=0.006542 Jy/beam ! Clean residual mean=-0.000028 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.0867743 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0867743 Jy ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=18.47 mas, bpa=-18.29 degrees ! Estimated noise=931.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110336 Jy ! Component: 100 - total flux cleaned = 0.0159001 Jy ! Component: 150 - total flux cleaned = 0.0177882 Jy ! Component: 200 - total flux cleaned = 0.0182339 Jy ! Total flux subtracted in 200 components = 0.0182339 Jy ! Clean residual min=-0.003504 max=0.003416 Jy/beam ! Clean residual mean=-0.000004 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.105008 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 75 components and 0.105008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.236 mas, bmaj=33.13 mas, bpa=-5.516 degrees ! Estimated noise=1067.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252356 Jy ! Component: 100 - total flux cleaned = 0.00241169 Jy ! Component: 150 - total flux cleaned = 0.00231439 Jy ! Component: 200 - total flux cleaned = 0.00223855 Jy ! Total flux subtracted in 200 components = 0.00223855 Jy ! Clean residual min=-0.002826 max=0.003868 Jy/beam ! Clean residual mean=0.000005 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.107247 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.67888e-07 Jy ! Component: 100 - total flux cleaned = -6.42007e-05 Jy ! Component: 150 - total flux cleaned = -6.47835e-05 Jy ! Component: 200 - total flux cleaned = -0.000116935 Jy ! Total flux subtracted in 200 components = -0.000116935 Jy ! Clean residual min=-0.002653 max=0.003800 Jy/beam ! Clean residual mean=0.000003 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.10713 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 130 components and 0.10713 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=18.47 mas, bpa=-18.29 degrees ! Estimated noise=931.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228892 Jy ! Component: 100 - total flux cleaned = -0.000161099 Jy ! Component: 150 - total flux cleaned = -0.000161457 Jy ! Component: 200 - total flux cleaned = -0.000215014 Jy ! Total flux subtracted in 200 components = -0.000215014 Jy ! Clean residual min=-0.002556 max=0.003095 Jy/beam ! Clean residual mean=0.000000 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.106915 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 163 components and 0.106915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110293Jy sigma=0.000707 ! Fit after self-cal, rms=0.110311Jy sigma=0.000707 wmodel J1437-2947_S_2017_10_21_pus_map.mod ! Writing 163 model components to file: J1437-2947_S_2017_10_21_pus_map.mod wobs J1437-2947_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1437-2947_S_2017_10_21_pus_uvs.fits wwins J1437-2947_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1437-2947_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133187 Jy ! Component: 100 - total flux cleaned = 0.00184525 Jy ! Component: 150 - total flux cleaned = 0.00214575 Jy ! Component: 200 - total flux cleaned = 0.00222416 Jy ! Component: 250 - total flux cleaned = 0.0023378 Jy ! Component: 300 - total flux cleaned = 0.00233863 Jy ! Component: 350 - total flux cleaned = 0.00219886 Jy ! Component: 400 - total flux cleaned = 0.00209827 Jy ! Component: 450 - total flux cleaned = 0.00213172 Jy ! Component: 500 - total flux cleaned = 0.00216327 Jy ! Component: 550 - total flux cleaned = 0.00216268 Jy ! Component: 600 - total flux cleaned = 0.00207166 Jy ! Component: 650 - total flux cleaned = 0.00210059 Jy ! Component: 700 - total flux cleaned = 0.00195668 Jy ! Component: 750 - total flux cleaned = 0.00187328 Jy ! Component: 800 - total flux cleaned = 0.00184615 Jy ! Component: 850 - total flux cleaned = 0.00184615 Jy ! Component: 900 - total flux cleaned = 0.00184585 Jy ! Component: 950 - total flux cleaned = 0.0018451 Jy ! Component: 1000 - total flux cleaned = 0.00176895 Jy ! Component: 1050 - total flux cleaned = 0.00172024 Jy ! Component: 1100 - total flux cleaned = 0.00172011 Jy ! Component: 1150 - total flux cleaned = 0.00171977 Jy ! Component: 1200 - total flux cleaned = 0.00171946 Jy ! Component: 1250 - total flux cleaned = 0.00169614 Jy ! Component: 1300 - total flux cleaned = 0.00165103 Jy ! Component: 1350 - total flux cleaned = 0.00162897 Jy ! Component: 1400 - total flux cleaned = 0.00158599 Jy ! Component: 1450 - total flux cleaned = 0.00158584 Jy ! Component: 1500 - total flux cleaned = 0.00150223 Jy ! Component: 1550 - total flux cleaned = 0.00154306 Jy ! Component: 1600 - total flux cleaned = 0.00152257 Jy ! Component: 1650 - total flux cleaned = 0.0014626 Jy ! Component: 1700 - total flux cleaned = 0.00136424 Jy ! Component: 1750 - total flux cleaned = 0.00132538 Jy ! Component: 1800 - total flux cleaned = 0.00119193 Jy ! Component: 1850 - total flux cleaned = 0.00113562 Jy ! Component: 1900 - total flux cleaned = 0.00106114 Jy ! Component: 1950 - total flux cleaned = 0.000969048 Jy ! Component: 2000 - total flux cleaned = 0.000842188 Jy ! Component: 2050 - total flux cleaned = 0.0007886 Jy ! Component: 2100 - total flux cleaned = 0.000700183 Jy ! Component: 2150 - total flux cleaned = 0.000682575 Jy ! Component: 2200 - total flux cleaned = 0.000578764 Jy ! Component: 2250 - total flux cleaned = 0.00049355 Jy ! Component: 2300 - total flux cleaned = 0.000493386 Jy ! Component: 2350 - total flux cleaned = 0.000409916 Jy ! Component: 2400 - total flux cleaned = 0.000376986 Jy ! Component: 2450 - total flux cleaned = 0.000295263 Jy ! Component: 2500 - total flux cleaned = 0.000230469 Jy ! Component: 2550 - total flux cleaned = 0.000166429 Jy ! Component: 2600 - total flux cleaned = 0.000134987 Jy ! Component: 2650 - total flux cleaned = 0.000103724 Jy ! Component: 2700 - total flux cleaned = 5.70179e-05 Jy ! Component: 2750 - total flux cleaned = 1.07791e-05 Jy ! Component: 2800 - total flux cleaned = -5.03801e-05 Jy ! Component: 2850 - total flux cleaned = -8.0691e-05 Jy ! Component: 2900 - total flux cleaned = -0.000110821 Jy ! Component: 2950 - total flux cleaned = -0.000155772 Jy ! Component: 3000 - total flux cleaned = -0.000185168 Jy ! Component: 3050 - total flux cleaned = -0.000214506 Jy ! Component: 3100 - total flux cleaned = -0.00024367 Jy ! Component: 3150 - total flux cleaned = -0.000272375 Jy ! Component: 3200 - total flux cleaned = -0.00031551 Jy ! Component: 3250 - total flux cleaned = -0.000344041 Jy ! Component: 3300 - total flux cleaned = -0.000315603 Jy ! Component: 3350 - total flux cleaned = -0.000329666 Jy ! Component: 3400 - total flux cleaned = -0.000329706 Jy ! Component: 3450 - total flux cleaned = -0.000371616 Jy ! Component: 3500 - total flux cleaned = -0.000371608 Jy ! Component: 3550 - total flux cleaned = -0.000385375 Jy ! Component: 3600 - total flux cleaned = -0.000385365 Jy ! Component: 3650 - total flux cleaned = -0.000385402 Jy ! Component: 3700 - total flux cleaned = -0.000399012 Jy ! Component: 3750 - total flux cleaned = -0.000426138 Jy ! Component: 3800 - total flux cleaned = -0.000412691 Jy ! Component: 3850 - total flux cleaned = -0.000412687 Jy ! Component: 3900 - total flux cleaned = -0.000372637 Jy ! Component: 3950 - total flux cleaned = -0.000372613 Jy ! Component: 4000 - total flux cleaned = -0.000372619 Jy ! Component: 4050 - total flux cleaned = -0.0003462 Jy ! Total flux subtracted in 4096 components = -0.000333141 Jy ! Clean residual min=-0.000702 max=0.000691 Jy/beam ! Clean residual mean=-0.000002 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.106582 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 423 components and 0.106582 Jy ![Exited script file: muppet] wmap "J1437-2947_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 18.47 at -18.29 degrees (North through East) ! Clean map min=-0.0029385 max=0.06529 Jy/beam ! Writing clean map to FITS file: J1437-2947_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0652899 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246573 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13297 1.13297 2.26595 4.5319 9.0638 18.1276 36.2552 72.5104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 18.47 at -18.29 degrees (North through East) ! Clean map min=-0.0029385 max=0.06529 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1437-2947_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:58 2019