! Started logfile: J1436-1846_S_2017_10_09_pus_uvs.log on Sun May 12 13:14:37 2019 obs J1436-1846_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1436-1846_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.682292 visibilities/baseline/integration-bin. ! Found source: J1436-1846 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1436-1846_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 789 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986176Jy sigma=0.007327 ! Fit after self-cal, rms=0.942972Jy sigma=0.007044 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=11.91 mas, bpa=-19.94 degrees ! Estimated noise=1282.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478326 Jy ! Component: 100 - total flux cleaned = 0.058419 Jy ! Total flux subtracted in 100 components = 0.058419 Jy ! Clean residual min=-0.004232 max=0.004333 Jy/beam ! Clean residual mean=-0.000006 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.058419 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.058419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095224Jy sigma=0.000646 ! Fit after self-cal, rms=0.094398Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=14.35 mas, bpa=-18.75 degrees ! Estimated noise=935.183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404238 Jy ! Component: 100 - total flux cleaned = 0.00600326 Jy ! Component: 150 - total flux cleaned = 0.00678742 Jy ! Component: 200 - total flux cleaned = 0.00705062 Jy ! Total flux subtracted in 200 components = 0.00705062 Jy ! Clean residual min=-0.002660 max=0.002786 Jy/beam ! Clean residual mean=0.000008 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0654696 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.0654696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094192Jy sigma=0.000639 ! Fit after self-cal, rms=0.094124Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.98 KP 1.02 ! LA 1.03 MK 1.03 NL 0.99 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 1.03 HN 1.04 KP 0.97 ! LA 0.94 MK 1.06 NL 1.12 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.95 KP 0.89 ! LA 0.83 MK 1.00 NL 1.15 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.75 KP 1.00* ! LA 0.91 MK 0.90 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.094124Jy sigma=0.000639 ! Fit after self-cal, rms=0.092195Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=14.59 mas, bpa=-18.41 degrees ! Estimated noise=947.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250701 Jy ! Component: 100 - total flux cleaned = -0.000320774 Jy ! Component: 150 - total flux cleaned = -0.000342377 Jy ! Component: 200 - total flux cleaned = -0.000342285 Jy ! Total flux subtracted in 200 components = -0.000342285 Jy ! Clean residual min=-0.002427 max=0.002155 Jy/beam ! Clean residual mean=0.000008 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0651273 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0651273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092183Jy sigma=0.000638 ! Fit after self-cal, rms=0.092048Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092048Jy sigma=0.000638 ! Fit after self-cal, rms=0.091136Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=14.56 mas, bpa=-18.52 degrees ! Estimated noise=944.923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107223 Jy ! Component: 100 - total flux cleaned = -0.000126758 Jy ! Component: 150 - total flux cleaned = -0.000157558 Jy ! Component: 200 - total flux cleaned = -0.000171973 Jy ! Total flux subtracted in 200 components = -0.000171973 Jy ! Clean residual min=-0.002516 max=0.002095 Jy/beam ! Clean residual mean=0.000004 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0649553 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.0649553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091130Jy sigma=0.000637 ! Fit after self-cal, rms=0.091104Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.27351e-05 Jy ! Component: 100 - total flux cleaned = -3.3668e-05 Jy ! Component: 150 - total flux cleaned = -3.3427e-05 Jy ! Component: 200 - total flux cleaned = -2.03677e-05 Jy ! Total flux subtracted in 200 components = -2.03677e-05 Jy ! Clean residual min=-0.002434 max=0.002141 Jy/beam ! Clean residual mean=0.000005 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.064935 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.064935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091098Jy sigma=0.000636 ! Fit after self-cal, rms=0.091098Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091098Jy sigma=0.000636 ! Fit after self-cal, rms=0.091233Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=14.55 mas, bpa=-18.57 degrees ! Estimated noise=945.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.76498e-05 Jy ! Component: 100 - total flux cleaned = -8.38666e-05 Jy ! Component: 150 - total flux cleaned = -9.82188e-05 Jy ! Component: 200 - total flux cleaned = -0.000124236 Jy ! Total flux subtracted in 200 components = -0.000124236 Jy ! Clean residual min=-0.002419 max=0.002008 Jy/beam ! Clean residual mean=0.000004 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0648107 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0648107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091227Jy sigma=0.000636 ! Fit after self-cal, rms=0.091246Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.9905e-05 Jy ! Component: 100 - total flux cleaned = -8.87054e-05 Jy ! Component: 150 - total flux cleaned = -8.85669e-05 Jy ! Component: 200 - total flux cleaned = -0.000100045 Jy ! Total flux subtracted in 200 components = -0.000100045 Jy ! Clean residual min=-0.002406 max=0.002013 Jy/beam ! Clean residual mean=0.000004 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0647107 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.0647107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091242Jy sigma=0.000636 ! Fit after self-cal, rms=0.091242Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091242Jy sigma=0.000636 ! Fit after self-cal, rms=0.091422Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.738 mas, bmaj=20.48 mas, bpa=-10.98 degrees ! Estimated noise=1181.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259548 Jy ! Component: 100 - total flux cleaned = -0.000305704 Jy ! Component: 150 - total flux cleaned = -0.000371975 Jy ! Component: 200 - total flux cleaned = -0.000432708 Jy ! Total flux subtracted in 200 components = -0.000432708 Jy ! Clean residual min=-0.002593 max=0.001959 Jy/beam ! Clean residual mean=0.000008 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.064278 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0642779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091421Jy sigma=0.000636 ! Fit after self-cal, rms=0.091428Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121884 Jy ! Component: 100 - total flux cleaned = -0.000159274 Jy ! Component: 150 - total flux cleaned = -0.000202146 Jy ! Component: 200 - total flux cleaned = -0.00024165 Jy ! Total flux subtracted in 200 components = -0.00024165 Jy ! Clean residual min=-0.002570 max=0.001931 Jy/beam ! Clean residual mean=0.000008 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0640363 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.0640363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091429Jy sigma=0.000636 ! Fit after self-cal, rms=0.091426Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=14.55 mas, bpa=-18.61 degrees ! Estimated noise=945.583 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 14.55 at -18.61 degrees (North through East) ! Clean map min=-0.0023103 max=0.060469 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=12.05 mas, bpa=-19.59 degrees ! Estimated noise=1289.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484091 Jy ! Component: 100 - total flux cleaned = 0.0593003 Jy ! Component: 150 - total flux cleaned = 0.0630686 Jy ! Component: 200 - total flux cleaned = 0.0648422 Jy ! Total flux subtracted in 200 components = 0.0648422 Jy ! Clean residual min=-0.003790 max=0.003326 Jy/beam ! Clean residual mean=-0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.0648422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0648422 Jy ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=14.55 mas, bpa=-18.61 degrees ! Estimated noise=945.583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152592 Jy ! Component: 100 - total flux cleaned = -0.000199393 Jy ! Component: 150 - total flux cleaned = -0.000233389 Jy ! Component: 200 - total flux cleaned = -0.000232763 Jy ! Total flux subtracted in 200 components = -0.000232763 Jy ! Clean residual min=-0.002399 max=0.002053 Jy/beam ! Clean residual mean=0.000004 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0646094 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.0646094 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.738 mas, bmaj=20.48 mas, bpa=-10.98 degrees ! Estimated noise=1181.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449493 Jy ! Component: 100 - total flux cleaned = -0.000489017 Jy ! Component: 150 - total flux cleaned = -0.000555012 Jy ! Component: 200 - total flux cleaned = -0.000627815 Jy ! Total flux subtracted in 200 components = -0.000627815 Jy ! Clean residual min=-0.002557 max=0.001939 Jy/beam ! Clean residual mean=0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0639816 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.93865e-05 Jy ! Component: 100 - total flux cleaned = -7.61369e-05 Jy ! Component: 150 - total flux cleaned = -0.000120961 Jy ! Component: 200 - total flux cleaned = -0.000152039 Jy ! Total flux subtracted in 200 components = -0.000152039 Jy ! Clean residual min=-0.002556 max=0.001913 Jy/beam ! Clean residual mean=0.000007 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0638296 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.0638296 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=14.55 mas, bpa=-18.61 degrees ! Estimated noise=945.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.8273e-05 Jy ! Component: 100 - total flux cleaned = 8.97762e-05 Jy ! Component: 150 - total flux cleaned = 0.000107642 Jy ! Component: 200 - total flux cleaned = 0.000107451 Jy ! Total flux subtracted in 200 components = 0.000107451 Jy ! Clean residual min=-0.002378 max=0.001940 Jy/beam ! Clean residual mean=0.000003 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.063937 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.063937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091429Jy sigma=0.000636 ! Fit after self-cal, rms=0.091426Jy sigma=0.000636 wmodel J1436-1846_S_2017_10_09_pus_map.mod ! Writing 64 model components to file: J1436-1846_S_2017_10_09_pus_map.mod wobs J1436-1846_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1436-1846_S_2017_10_09_pus_uvs.fits wwins J1436-1846_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1436-1846_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000632474 Jy ! Component: 100 - total flux cleaned = -0.00094266 Jy ! Component: 150 - total flux cleaned = -0.00113884 Jy ! Component: 200 - total flux cleaned = -0.00129323 Jy ! Component: 250 - total flux cleaned = -0.00141171 Jy ! Component: 300 - total flux cleaned = -0.00149689 Jy ! Component: 350 - total flux cleaned = -0.00157918 Jy ! Component: 400 - total flux cleaned = -0.0016847 Jy ! Component: 450 - total flux cleaned = -0.00173544 Jy ! Component: 500 - total flux cleaned = -0.00171067 Jy ! Component: 550 - total flux cleaned = -0.00171055 Jy ! Component: 600 - total flux cleaned = -0.00168719 Jy ! Component: 650 - total flux cleaned = -0.00166394 Jy ! Component: 700 - total flux cleaned = -0.00161928 Jy ! Component: 750 - total flux cleaned = -0.0016406 Jy ! Component: 800 - total flux cleaned = -0.00153438 Jy ! Component: 850 - total flux cleaned = -0.00147218 Jy ! Component: 900 - total flux cleaned = -0.00137088 Jy ! Component: 950 - total flux cleaned = -0.00133194 Jy ! Component: 1000 - total flux cleaned = -0.00123464 Jy ! Component: 1050 - total flux cleaned = -0.00110194 Jy ! Component: 1100 - total flux cleaned = -0.0010832 Jy ! Component: 1150 - total flux cleaned = -0.000936788 Jy ! Component: 1200 - total flux cleaned = -0.000883024 Jy ! Component: 1250 - total flux cleaned = -0.000847958 Jy ! Component: 1300 - total flux cleaned = -0.000795784 Jy ! Component: 1350 - total flux cleaned = -0.000727671 Jy ! Component: 1400 - total flux cleaned = -0.00066091 Jy ! Component: 1450 - total flux cleaned = -0.000611741 Jy ! Component: 1500 - total flux cleaned = -0.000627668 Jy ! Component: 1550 - total flux cleaned = -0.000516013 Jy ! Component: 1600 - total flux cleaned = -0.000438 Jy ! Component: 1650 - total flux cleaned = -0.000391777 Jy ! Component: 1700 - total flux cleaned = -0.00033106 Jy ! Component: 1750 - total flux cleaned = -0.000286013 Jy ! Component: 1800 - total flux cleaned = -0.000197652 Jy ! Component: 1850 - total flux cleaned = -0.000125213 Jy ! Component: 1900 - total flux cleaned = -9.64132e-05 Jy ! Component: 1950 - total flux cleaned = -5.36844e-05 Jy ! Component: 2000 - total flux cleaned = 1.64511e-05 Jy ! Component: 2050 - total flux cleaned = 7.18864e-05 Jy ! Component: 2100 - total flux cleaned = 9.92903e-05 Jy ! Component: 2150 - total flux cleaned = 0.000153309 Jy ! Component: 2200 - total flux cleaned = 0.00018003 Jy ! Component: 2250 - total flux cleaned = 0.000258837 Jy ! Component: 2300 - total flux cleaned = 0.000297579 Jy ! Component: 2350 - total flux cleaned = 0.0003361 Jy ! Component: 2400 - total flux cleaned = 0.000361386 Jy ! Component: 2450 - total flux cleaned = 0.00042405 Jy ! Component: 2500 - total flux cleaned = 0.000448807 Jy ! Component: 2550 - total flux cleaned = 0.000522369 Jy ! Component: 2600 - total flux cleaned = 0.000570697 Jy ! Component: 2650 - total flux cleaned = 0.000630769 Jy ! Component: 2700 - total flux cleaned = 0.000666454 Jy ! Component: 2750 - total flux cleaned = 0.000713519 Jy ! Component: 2800 - total flux cleaned = 0.000736837 Jy ! Component: 2850 - total flux cleaned = 0.000805926 Jy ! Component: 2900 - total flux cleaned = 0.000805884 Jy ! Component: 2950 - total flux cleaned = 0.000884668 Jy ! Component: 3000 - total flux cleaned = 0.000906997 Jy ! Component: 3050 - total flux cleaned = 0.000940265 Jy ! Component: 3100 - total flux cleaned = 0.000995263 Jy ! Component: 3150 - total flux cleaned = 0.00107133 Jy ! Component: 3200 - total flux cleaned = 0.00113583 Jy ! Component: 3250 - total flux cleaned = 0.00113593 Jy ! Component: 3300 - total flux cleaned = 0.00117833 Jy ! Component: 3350 - total flux cleaned = 0.00118889 Jy ! Component: 3400 - total flux cleaned = 0.00125137 Jy ! Component: 3450 - total flux cleaned = 0.00126175 Jy ! Component: 3500 - total flux cleaned = 0.00131287 Jy ! Component: 3550 - total flux cleaned = 0.00138363 Jy ! Component: 3600 - total flux cleaned = 0.00138357 Jy ! Component: 3650 - total flux cleaned = 0.00137369 Jy ! Component: 3700 - total flux cleaned = 0.0014034 Jy ! Component: 3750 - total flux cleaned = 0.00138371 Jy ! Component: 3800 - total flux cleaned = 0.00138378 Jy ! Component: 3850 - total flux cleaned = 0.00144209 Jy ! Component: 3900 - total flux cleaned = 0.00143243 Jy ! Component: 3950 - total flux cleaned = 0.00147078 Jy ! Component: 4000 - total flux cleaned = 0.00148022 Jy ! Component: 4050 - total flux cleaned = 0.00148018 Jy ! Total flux subtracted in 4096 components = 0.00148022 Jy ! Clean residual min=-0.000514 max=0.000575 Jy/beam ! Clean residual mean=0.000005 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0654172 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 349 components and 0.0654172 Jy ![Exited script file: muppet] wmap "J1436-1846_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 14.55 at -18.61 degrees (North through East) ! Clean map min=-0.0012345 max=0.060687 Jy/beam ! Writing clean map to FITS file: J1436-1846_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0606872 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173019 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.855301 0.855301 1.7106 3.42121 6.84241 13.6848 27.3696 54.7393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 14.55 at -18.61 degrees (North through East) ! Clean map min=-0.0012345 max=0.060687 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1436-1846_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:14:42 2019