! Started logfile: J1435+7605_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:51:16 2019 obs J1435+7605_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1435+7605_S_2017_05_31_pus_uva.fits ! AN table 1: 289 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983083 visibilities/baseline/integration-bin. ! Found source: J1435+7605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 51140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1435+7605_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1475 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.357349Jy sigma=0.006728 ! Fit after self-cal, rms=1.344009Jy sigma=0.006599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=3.654 mas, bpa=78.94 degrees ! Estimated noise=890.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130766 Jy ! Component: 100 - total flux cleaned = 0.201424 Jy ! Total flux subtracted in 100 components = 0.201424 Jy ! Clean residual min=-0.016636 max=0.060314 Jy/beam ! Clean residual mean=-0.000755 rms=0.005959 Jy/beam ! Combined flux in latest and established models = 0.201424 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.201424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.138832Jy sigma=0.001932 ! Fit after self-cal, rms=1.138801Jy sigma=0.001928 ! Inverting map ! Added new window around map position (-1, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613906 Jy ! Component: 100 - total flux cleaned = 0.105301 Jy ! Total flux subtracted in 100 components = 0.105301 Jy ! Clean residual min=-0.015696 max=0.045391 Jy/beam ! Clean residual mean=-0.000615 rms=0.004874 Jy/beam ! Combined flux in latest and established models = 0.306724 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.306724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.127135Jy sigma=0.001599 ! Fit after self-cal, rms=1.126909Jy sigma=0.001583 ! Inverting map ! Added new window around map position (6, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047489 Jy ! Component: 100 - total flux cleaned = 0.0830697 Jy ! Total flux subtracted in 100 components = 0.0830697 Jy ! Clean residual min=-0.013156 max=0.036520 Jy/beam ! Clean residual mean=-0.000500 rms=0.003987 Jy/beam ! Combined flux in latest and established models = 0.389794 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 100 components and 0.389794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.119284Jy sigma=0.001351 ! Fit after self-cal, rms=1.119193Jy sigma=0.001342 ! Inverting map ! Added new window around map position (5.5, 9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393943 Jy ! Component: 100 - total flux cleaned = 0.0686604 Jy ! Total flux subtracted in 100 components = 0.0686604 Jy ! Clean residual min=-0.010329 max=0.022713 Jy/beam ! Clean residual mean=-0.000409 rms=0.003251 Jy/beam ! Combined flux in latest and established models = 0.458454 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 132 components and 0.458454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.113883Jy sigma=0.001166 ! Fit after self-cal, rms=1.113778Jy sigma=0.001160 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277265 Jy ! Component: 100 - total flux cleaned = 0.0501764 Jy ! Total flux subtracted in 100 components = 0.0501764 Jy ! Clean residual min=-0.009306 max=0.019383 Jy/beam ! Clean residual mean=-0.000342 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 0.508631 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 153 components and 0.508631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.110440Jy sigma=0.001053 ! Fit after self-cal, rms=1.110374Jy sigma=0.001050 ! Inverting map ! Added new window around map position (-3.5, -11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221093 Jy ! Component: 100 - total flux cleaned = 0.0403856 Jy ! Total flux subtracted in 100 components = 0.0403856 Jy ! Clean residual min=-0.008161 max=0.015516 Jy/beam ! Clean residual mean=-0.000290 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 0.549016 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 177 components and 0.549016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.108013Jy sigma=0.000977 ! Fit after self-cal, rms=1.108001Jy sigma=0.000975 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=4.716 mas, bpa=81.22 degrees ! Estimated noise=432.859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335949 Jy ! Component: 100 - total flux cleaned = 0.0587947 Jy ! Component: 150 - total flux cleaned = 0.0785493 Jy ! Component: 200 - total flux cleaned = 0.0942422 Jy ! Total flux subtracted in 200 components = 0.0942422 Jy ! Clean residual min=-0.009672 max=0.022251 Jy/beam ! Clean residual mean=-0.000429 rms=0.003134 Jy/beam ! Combined flux in latest and established models = 0.643259 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 224 components and 0.643259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.103646Jy sigma=0.000867 ! Fit after self-cal, rms=1.103617Jy sigma=0.000865 ! Inverting map ! Added new window around map position (36.5, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222195 Jy ! Component: 100 - total flux cleaned = 0.0371746 Jy ! Component: 150 - total flux cleaned = 0.0499048 Jy ! Component: 200 - total flux cleaned = 0.0609639 Jy ! Total flux subtracted in 200 components = 0.0609639 Jy ! Clean residual min=-0.007983 max=0.011816 Jy/beam ! Clean residual mean=-0.000321 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.704222 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 276 components and 0.704222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.101812Jy sigma=0.000811 ! Fit after self-cal, rms=1.101772Jy sigma=0.000809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.03 KP 1.00 ! LA 0.95 MK 1.14 NL 0.94 OV 1.04 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.07 KP 0.99 ! LA 0.93 MK 1.15 NL 1.05 OV 1.09 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.06 KP 0.96 ! LA 0.95 MK 1.15 NL 1.02 OV 1.01 ! PT 0.94 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.09 KP 1.00* ! LA 1.02 MK 1.04 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=1.101772Jy sigma=0.000809 ! Fit after self-cal, rms=1.194737Jy sigma=0.000785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=4.866 mas, bpa=80.94 degrees ! Estimated noise=447.841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105816 Jy ! Component: 100 - total flux cleaned = 0.0181369 Jy ! Component: 150 - total flux cleaned = 0.0242469 Jy ! Component: 200 - total flux cleaned = 0.0280245 Jy ! Total flux subtracted in 200 components = 0.0280245 Jy ! Clean residual min=-0.005567 max=0.008641 Jy/beam ! Clean residual mean=-0.000078 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 0.732247 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 316 components and 0.732247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.194018Jy sigma=0.000772 ! Fit after self-cal, rms=1.194002Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.194002Jy sigma=0.000772 ! Fit after self-cal, rms=1.075440Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=4.963 mas, bpa=80.9 degrees ! Estimated noise=454.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540969 Jy ! Component: 100 - total flux cleaned = 0.00827252 Jy ! Component: 150 - total flux cleaned = 0.0105932 Jy ! Component: 200 - total flux cleaned = 0.01269 Jy ! Total flux subtracted in 200 components = 0.01269 Jy ! Clean residual min=-0.004975 max=0.007403 Jy/beam ! Clean residual mean=-0.000032 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.744937 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 334 components and 0.744937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.075140Jy sigma=0.000756 ! Fit after self-cal, rms=1.075135Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755146 Jy ! Component: 100 - total flux cleaned = 0.0102271 Jy ! Component: 150 - total flux cleaned = 0.0118082 Jy ! Component: 200 - total flux cleaned = 0.0136026 Jy ! Total flux subtracted in 200 components = 0.0136026 Jy ! Clean residual min=-0.004445 max=0.004773 Jy/beam ! Clean residual mean=0.000009 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.758539 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 358 components and 0.758539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.075294Jy sigma=0.000750 ! Fit after self-cal, rms=1.075259Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.075259Jy sigma=0.000749 ! Fit after self-cal, rms=1.060715Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=4.941 mas, bpa=80.69 degrees ! Estimated noise=452.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505988 Jy ! Component: 100 - total flux cleaned = 0.00870593 Jy ! Component: 150 - total flux cleaned = 0.0108425 Jy ! Component: 200 - total flux cleaned = 0.0126769 Jy ! Total flux subtracted in 200 components = 0.0126769 Jy ! Clean residual min=-0.004231 max=0.004444 Jy/beam ! Clean residual mean=-0.000002 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.771216 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 374 components and 0.771216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.060671Jy sigma=0.000745 ! Fit after self-cal, rms=1.060655Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178642 Jy ! Component: 100 - total flux cleaned = 0.00347881 Jy ! Component: 150 - total flux cleaned = 0.00444839 Jy ! Component: 200 - total flux cleaned = 0.00544488 Jy ! Total flux subtracted in 200 components = 0.00544488 Jy ! Clean residual min=-0.004154 max=0.004372 Jy/beam ! Clean residual mean=0.000013 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.776661 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 382 components and 0.776661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.060628Jy sigma=0.000743 ! Fit after self-cal, rms=1.060622Jy sigma=0.000743 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.060622Jy sigma=0.000743 ! Fit after self-cal, rms=1.054149Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.487 mas, bmaj=9.874 mas, bpa=78.92 degrees ! Estimated noise=552.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590086 Jy ! Component: 100 - total flux cleaned = 0.0101719 Jy ! Component: 150 - total flux cleaned = 0.0135721 Jy ! Component: 200 - total flux cleaned = 0.0163103 Jy ! Total flux subtracted in 200 components = 0.0163103 Jy ! Clean residual min=-0.004609 max=0.005643 Jy/beam ! Clean residual mean=0.000024 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.792971 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 404 components and 0.792971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.053941Jy sigma=0.000741 ! Fit after self-cal, rms=1.053925Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188042 Jy ! Component: 100 - total flux cleaned = 0.00336239 Jy ! Component: 150 - total flux cleaned = 0.0043833 Jy ! Component: 200 - total flux cleaned = 0.00493224 Jy ! Total flux subtracted in 200 components = 0.00493224 Jy ! Clean residual min=-0.004676 max=0.005515 Jy/beam ! Clean residual mean=0.000049 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.797903 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 415 components and 0.797903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.053895Jy sigma=0.000741 ! Fit after self-cal, rms=1.053886Jy sigma=0.000740 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=4.928 mas, bpa=80.91 degrees ! Estimated noise=452.506 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.832 x 4.928 at 80.91 degrees (North through East) ! Clean map min=-0.004028 max=0.14542 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=3.821 mas, bpa=78.46 degrees ! Estimated noise=954.309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138971 Jy ! Component: 100 - total flux cleaned = 0.227845 Jy ! Component: 150 - total flux cleaned = 0.295222 Jy ! Component: 200 - total flux cleaned = 0.348947 Jy ! Total flux subtracted in 200 components = 0.348947 Jy ! Clean residual min=-0.012577 max=0.031966 Jy/beam ! Clean residual mean=-0.000566 rms=0.004226 Jy/beam ! Combined flux in latest and established models = 0.348947 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.348947 Jy ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=4.928 mas, bpa=80.91 degrees ! Estimated noise=452.506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850623 Jy ! Component: 100 - total flux cleaned = 0.144551 Jy ! Component: 150 - total flux cleaned = 0.188578 Jy ! Component: 200 - total flux cleaned = 0.222415 Jy ! Total flux subtracted in 200 components = 0.222415 Jy ! Clean residual min=-0.012196 max=0.021068 Jy/beam ! Clean residual mean=-0.000599 rms=0.004043 Jy/beam ! Combined flux in latest and established models = 0.571361 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 175 components and 0.571362 Jy ! Inverting map ! Added new window around map position (1, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027991 Jy ! Component: 100 - total flux cleaned = 0.051533 Jy ! Component: 150 - total flux cleaned = 0.0715253 Jy ! Component: 200 - total flux cleaned = 0.0887468 Jy ! Total flux subtracted in 200 components = 0.0887468 Jy ! Clean residual min=-0.007902 max=0.010902 Jy/beam ! Clean residual mean=-0.000335 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 0.660108 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 237 components and 0.660109 Jy ! Inverting map ! Added new window around map position (0.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150822 Jy ! Component: 100 - total flux cleaned = 0.0283648 Jy ! Component: 150 - total flux cleaned = 0.0401382 Jy ! Component: 200 - total flux cleaned = 0.0506023 Jy ! Total flux subtracted in 200 components = 0.0506023 Jy ! Clean residual min=-0.005681 max=0.007270 Jy/beam ! Clean residual mean=-0.000198 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.710711 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 303 components and 0.710711 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.487 mas, bmaj=9.874 mas, bpa=78.92 degrees ! Estimated noise=552.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175625 Jy ! Component: 100 - total flux cleaned = 0.0313638 Jy ! Component: 150 - total flux cleaned = 0.0425054 Jy ! Component: 200 - total flux cleaned = 0.0515698 Jy ! Total flux subtracted in 200 components = 0.0515698 Jy ! Clean residual min=-0.005704 max=0.005849 Jy/beam ! Clean residual mean=-0.000145 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.76228 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007406 Jy ! Component: 100 - total flux cleaned = 0.0134751 Jy ! Component: 150 - total flux cleaned = 0.0184619 Jy ! Component: 200 - total flux cleaned = 0.0225652 Jy ! Total flux subtracted in 200 components = 0.0225652 Jy ! Clean residual min=-0.004753 max=0.005259 Jy/beam ! Clean residual mean=-0.000027 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.784845 Jy ! Adding 184 model components to the UV plane model. ! The established model now contains 441 components and 0.784846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=4.928 mas, bpa=80.91 degrees ! Estimated noise=452.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306924 Jy ! Component: 100 - total flux cleaned = 0.00428712 Jy ! Component: 150 - total flux cleaned = 0.00528603 Jy ! Component: 200 - total flux cleaned = 0.00619069 Jy ! Total flux subtracted in 200 components = 0.00619069 Jy ! Clean residual min=-0.003719 max=0.003935 Jy/beam ! Clean residual mean=0.000003 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.791036 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 470 components and 0.791036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.053975Jy sigma=0.000739 ! Fit after self-cal, rms=1.053942Jy sigma=0.000738 wmodel J1435+7605_S_2017_05_31_pus_map.mod ! Writing 470 model components to file: J1435+7605_S_2017_05_31_pus_map.mod wobs J1435+7605_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1435+7605_S_2017_05_31_pus_uvs.fits wwins J1435+7605_S_2017_05_31_pus_map.win ! wwins: Wrote 9 windows to J1435+7605_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271554 Jy ! Component: 100 - total flux cleaned = 0.000780407 Jy ! Component: 150 - total flux cleaned = 0.00145041 Jy ! Component: 200 - total flux cleaned = 0.00180456 Jy ! Component: 250 - total flux cleaned = 0.00232068 Jy ! Component: 300 - total flux cleaned = 0.00254454 Jy ! Component: 350 - total flux cleaned = 0.00287288 Jy ! Component: 400 - total flux cleaned = 0.00324842 Jy ! Component: 450 - total flux cleaned = 0.00366886 Jy ! Component: 500 - total flux cleaned = 0.00377289 Jy ! Component: 550 - total flux cleaned = 0.00402709 Jy ! Component: 600 - total flux cleaned = 0.00412607 Jy ! Component: 650 - total flux cleaned = 0.0041748 Jy ! Component: 700 - total flux cleaned = 0.00417482 Jy ! Component: 750 - total flux cleaned = 0.00422306 Jy ! Component: 800 - total flux cleaned = 0.00431824 Jy ! Component: 850 - total flux cleaned = 0.00445798 Jy ! Component: 900 - total flux cleaned = 0.00455089 Jy ! Component: 950 - total flux cleaned = 0.00473122 Jy ! Component: 1000 - total flux cleaned = 0.00464145 Jy ! Component: 1050 - total flux cleaned = 0.00481774 Jy ! Component: 1100 - total flux cleaned = 0.00473048 Jy ! Component: 1150 - total flux cleaned = 0.0048606 Jy ! Component: 1200 - total flux cleaned = 0.00498883 Jy ! Component: 1250 - total flux cleaned = 0.00511511 Jy ! Component: 1300 - total flux cleaned = 0.0052402 Jy ! Component: 1350 - total flux cleaned = 0.00536377 Jy ! Component: 1400 - total flux cleaned = 0.00528281 Jy ! Component: 1450 - total flux cleaned = 0.00564595 Jy ! Component: 1500 - total flux cleaned = 0.00564546 Jy ! Component: 1550 - total flux cleaned = 0.00564544 Jy ! Component: 1600 - total flux cleaned = 0.00584175 Jy ! Component: 1650 - total flux cleaned = 0.00591923 Jy ! Component: 1700 - total flux cleaned = 0.0061115 Jy ! Component: 1750 - total flux cleaned = 0.00626333 Jy ! Component: 1800 - total flux cleaned = 0.00626368 Jy ! Component: 1850 - total flux cleaned = 0.00637675 Jy ! Component: 1900 - total flux cleaned = 0.00659982 Jy ! Component: 1950 - total flux cleaned = 0.00671082 Jy ! Component: 2000 - total flux cleaned = 0.00667504 Jy ! Component: 2050 - total flux cleaned = 0.00678378 Jy ! Component: 2100 - total flux cleaned = 0.0068915 Jy ! Component: 2150 - total flux cleaned = 0.00682074 Jy ! Component: 2200 - total flux cleaned = 0.00678547 Jy ! Component: 2250 - total flux cleaned = 0.00689047 Jy ! Component: 2300 - total flux cleaned = 0.00682106 Jy ! Component: 2350 - total flux cleaned = 0.00682121 Jy ! Component: 2400 - total flux cleaned = 0.00685546 Jy ! Component: 2450 - total flux cleaned = 0.00668577 Jy ! Component: 2500 - total flux cleaned = 0.00675383 Jy ! Component: 2550 - total flux cleaned = 0.00668712 Jy ! Component: 2600 - total flux cleaned = 0.00678608 Jy ! Component: 2650 - total flux cleaned = 0.00662211 Jy ! Component: 2700 - total flux cleaned = 0.00675203 Jy ! Component: 2750 - total flux cleaned = 0.00652527 Jy ! Component: 2800 - total flux cleaned = 0.00652521 Jy ! Component: 2850 - total flux cleaned = 0.00649327 Jy ! Component: 2900 - total flux cleaned = 0.0064302 Jy ! Component: 2950 - total flux cleaned = 0.00646167 Jy ! Component: 3000 - total flux cleaned = 0.00639922 Jy ! Component: 3050 - total flux cleaned = 0.00630643 Jy ! Component: 3100 - total flux cleaned = 0.00639859 Jy ! Component: 3150 - total flux cleaned = 0.00642897 Jy ! Component: 3200 - total flux cleaned = 0.0063988 Jy ! Component: 3250 - total flux cleaned = 0.00639884 Jy ! Component: 3300 - total flux cleaned = 0.00621919 Jy ! Component: 3350 - total flux cleaned = 0.00624928 Jy ! Component: 3400 - total flux cleaned = 0.00627905 Jy ! Component: 3450 - total flux cleaned = 0.00624964 Jy ! Component: 3500 - total flux cleaned = 0.00619115 Jy ! Component: 3550 - total flux cleaned = 0.00624895 Jy ! Component: 3600 - total flux cleaned = 0.00627769 Jy ! Component: 3650 - total flux cleaned = 0.00622037 Jy ! Component: 3700 - total flux cleaned = 0.00613472 Jy ! Component: 3750 - total flux cleaned = 0.00621939 Jy ! Component: 3800 - total flux cleaned = 0.00613499 Jy ! Component: 3850 - total flux cleaned = 0.00616295 Jy ! Component: 3900 - total flux cleaned = 0.00613512 Jy ! Component: 3950 - total flux cleaned = 0.00616272 Jy ! Component: 4000 - total flux cleaned = 0.00605299 Jy ! Component: 4050 - total flux cleaned = 0.00616197 Jy ! Total flux subtracted in 4096 components = 0.0061077 Jy ! Clean residual min=-0.001727 max=0.001474 Jy/beam ! Clean residual mean=-0.000004 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.797144 Jy keep ! Adding 368 model components to the UV plane model. ! The established model now contains 838 components and 0.797144 Jy ![Exited script file: muppet] wmap "J1435+7605_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.832 x 4.928 at 80.91 degrees (North through East) ! Clean map min=-0.0028504 max=0.13837 Jy/beam ! Writing clean map to FITS file: J1435+7605_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138371 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000551602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19592 1.19592 2.39183 4.78367 9.56734 19.1347 38.2694 76.5387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.832 x 4.928 at 80.91 degrees (North through East) ! Clean map min=-0.0028504 max=0.13837 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1435+7605_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:51:24 2019