! Started logfile: J1434-1146_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:22 2019 obs J1434-1146_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1434-1146_S_2017_05_27_pus_uva.fits ! AN table 1: 79 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.692546 visibilities/baseline/integration-bin. ! Found source: J1434-1146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 9848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1434-1146_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 626 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878060Jy sigma=0.005978 ! Fit after self-cal, rms=0.856624Jy sigma=0.005862 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=6.68 mas, bpa=-1.575 degrees ! Estimated noise=1717.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114444 Jy ! Component: 100 - total flux cleaned = 0.139504 Jy ! Total flux subtracted in 100 components = 0.139504 Jy ! Clean residual min=-0.006491 max=0.007688 Jy/beam ! Clean residual mean=-0.000027 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.139504 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.139504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129462Jy sigma=0.000661 ! Fit after self-cal, rms=0.129462Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=7.911 mas, bpa=4.466 degrees ! Estimated noise=1261.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748062 Jy ! Component: 100 - total flux cleaned = 0.0101624 Jy ! Component: 150 - total flux cleaned = 0.010315 Jy ! Component: 200 - total flux cleaned = 0.0104549 Jy ! Total flux subtracted in 200 components = 0.0104549 Jy ! Clean residual min=-0.007047 max=0.005416 Jy/beam ! Clean residual mean=-0.000026 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.149959 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.149959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128737Jy sigma=0.000659 ! Fit after self-cal, rms=0.128748Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.93 HN 1.05 KP 0.98 ! LA 0.99 MK 0.89 NL 0.95 OV 1.06 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.99 HN 1.07 KP 0.97 ! LA 0.94 MK 0.92 NL 1.12 OV 1.10 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.02 HN 1.10 KP 0.99 ! LA 0.97 MK 1.00 NL 1.09 OV 0.97 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.98 KP 1.00* ! LA 0.69 MK 0.92 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.128748Jy sigma=0.000659 ! Fit after self-cal, rms=0.116707Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=7.874 mas, bpa=3.943 degrees ! Estimated noise=1263.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000811108 Jy ! Component: 100 - total flux cleaned = -0.000869048 Jy ! Component: 150 - total flux cleaned = -0.000920711 Jy ! Component: 200 - total flux cleaned = -0.0010149 Jy ! Total flux subtracted in 200 components = -0.0010149 Jy ! Clean residual min=-0.004066 max=0.004070 Jy/beam ! Clean residual mean=-0.000010 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.148944 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.148944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116652Jy sigma=0.000652 ! Fit after self-cal, rms=0.116552Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116552Jy sigma=0.000652 ! Fit after self-cal, rms=0.120191Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=7.85 mas, bpa=3.735 degrees ! Estimated noise=1267.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746471 Jy ! Component: 100 - total flux cleaned = 0.000750939 Jy ! Component: 150 - total flux cleaned = 0.000749723 Jy ! Component: 200 - total flux cleaned = 0.000749066 Jy ! Total flux subtracted in 200 components = 0.000749066 Jy ! Clean residual min=-0.003696 max=0.003477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.149693 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.149693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120118Jy sigma=0.000649 ! Fit after self-cal, rms=0.120161Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143772 Jy ! Component: 100 - total flux cleaned = -0.000178724 Jy ! Component: 150 - total flux cleaned = -0.000243055 Jy ! Component: 200 - total flux cleaned = -0.000301105 Jy ! Total flux subtracted in 200 components = -0.000301105 Jy ! Clean residual min=-0.003697 max=0.003372 Jy/beam ! Clean residual mean=-0.000002 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.149392 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.149392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120135Jy sigma=0.000649 ! Fit after self-cal, rms=0.120133Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120133Jy sigma=0.000649 ! Fit after self-cal, rms=0.120737Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=7.823 mas, bpa=3.433 degrees ! Estimated noise=1272.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847231 Jy ! Component: 100 - total flux cleaned = 0.000847222 Jy ! Component: 150 - total flux cleaned = 0.000845954 Jy ! Component: 200 - total flux cleaned = 0.000816058 Jy ! Total flux subtracted in 200 components = 0.000816058 Jy ! Clean residual min=-0.003683 max=0.003364 Jy/beam ! Clean residual mean=-0.000001 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.150208 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.150208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120682Jy sigma=0.000649 ! Fit after self-cal, rms=0.120684Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.33168e-05 Jy ! Component: 100 - total flux cleaned = -0.00010018 Jy ! Component: 150 - total flux cleaned = -0.000149361 Jy ! Component: 200 - total flux cleaned = -0.000196176 Jy ! Total flux subtracted in 200 components = -0.000196176 Jy ! Clean residual min=-0.003676 max=0.003323 Jy/beam ! Clean residual mean=-0.000001 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.150012 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.150012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120667Jy sigma=0.000649 ! Fit after self-cal, rms=0.120666Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120666Jy sigma=0.000649 ! Fit after self-cal, rms=0.121351Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.703 mas, bmaj=14.44 mas, bpa=3.738 degrees ! Estimated noise=1493.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306844 Jy ! Component: 100 - total flux cleaned = 0.000304339 Jy ! Component: 150 - total flux cleaned = 0.000304897 Jy ! Component: 200 - total flux cleaned = 0.00026945 Jy ! Total flux subtracted in 200 components = 0.00026945 Jy ! Clean residual min=-0.003814 max=0.003893 Jy/beam ! Clean residual mean=-0.000003 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.150281 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.150281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121314Jy sigma=0.000649 ! Fit after self-cal, rms=0.121307Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131663 Jy ! Component: 100 - total flux cleaned = -0.000131806 Jy ! Component: 150 - total flux cleaned = -0.000132305 Jy ! Component: 200 - total flux cleaned = -0.000152907 Jy ! Total flux subtracted in 200 components = -0.000152907 Jy ! Clean residual min=-0.003804 max=0.003861 Jy/beam ! Clean residual mean=-0.000003 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.150128 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.150128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121293Jy sigma=0.000649 ! Fit after self-cal, rms=0.121288Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=7.802 mas, bpa=3.142 degrees ! Estimated noise=1279.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 7.802 at 3.142 degrees (North through East) ! Clean map min=-0.003482 max=0.15006 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=6.651 mas, bpa=-3.269 degrees ! Estimated noise=1728.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115085 Jy ! Component: 100 - total flux cleaned = 0.140299 Jy ! Component: 150 - total flux cleaned = 0.147973 Jy ! Component: 200 - total flux cleaned = 0.15051 Jy ! Total flux subtracted in 200 components = 0.15051 Jy ! Clean residual min=-0.004666 max=0.004951 Jy/beam ! Clean residual mean=0.000001 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.15051 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.15051 Jy ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=7.802 mas, bpa=3.142 degrees ! Estimated noise=1279.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130504 Jy ! Component: 100 - total flux cleaned = 0.00130808 Jy ! Component: 150 - total flux cleaned = 0.00120817 Jy ! Component: 200 - total flux cleaned = 0.00111515 Jy ! Total flux subtracted in 200 components = 0.00111515 Jy ! Clean residual min=-0.003809 max=0.003418 Jy/beam ! Clean residual mean=-0.000001 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.151626 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.151626 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.703 mas, bmaj=14.44 mas, bpa=3.738 degrees ! Estimated noise=1493.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00093869 Jy ! Component: 100 - total flux cleaned = -0.000965677 Jy ! Component: 150 - total flux cleaned = -0.0010429 Jy ! Component: 200 - total flux cleaned = -0.00111216 Jy ! Total flux subtracted in 200 components = -0.00111216 Jy ! Clean residual min=-0.003921 max=0.003860 Jy/beam ! Clean residual mean=-0.000003 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.150513 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06375e-05 Jy ! Component: 100 - total flux cleaned = -0.000114814 Jy ! Component: 150 - total flux cleaned = -0.000163771 Jy ! Component: 200 - total flux cleaned = -0.000192711 Jy ! Total flux subtracted in 200 components = -0.000192711 Jy ! Clean residual min=-0.003875 max=0.003833 Jy/beam ! Clean residual mean=-0.000003 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.150321 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.150321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=7.802 mas, bpa=3.142 degrees ! Estimated noise=1279.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420396 Jy ! Component: 100 - total flux cleaned = 0.000379677 Jy ! Component: 150 - total flux cleaned = 0.000272007 Jy ! Component: 200 - total flux cleaned = 0.000238619 Jy ! Total flux subtracted in 200 components = 0.000238619 Jy ! Clean residual min=-0.003711 max=0.003359 Jy/beam ! Clean residual mean=-0.000001 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.150559 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.150559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121343Jy sigma=0.000649 ! Fit after self-cal, rms=0.121346Jy sigma=0.000649 wmodel J1434-1146_S_2017_05_27_pus_map.mod ! Writing 39 model components to file: J1434-1146_S_2017_05_27_pus_map.mod wobs J1434-1146_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1434-1146_S_2017_05_27_pus_uvs.fits wwins J1434-1146_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1434-1146_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547611 Jy ! Component: 100 - total flux cleaned = -0.000602523 Jy ! Component: 150 - total flux cleaned = -0.000548762 Jy ! Component: 200 - total flux cleaned = -0.000445214 Jy ! Component: 250 - total flux cleaned = -0.000196669 Jy ! Component: 300 - total flux cleaned = -5.26108e-06 Jy ! Component: 350 - total flux cleaned = 0.0001326 Jy ! Component: 400 - total flux cleaned = 0.000310859 Jy ! Component: 450 - total flux cleaned = 0.000353458 Jy ! Component: 500 - total flux cleaned = 0.000226518 Jy ! Component: 550 - total flux cleaned = 0.000103098 Jy ! Component: 600 - total flux cleaned = 6.29111e-05 Jy ! Component: 650 - total flux cleaned = -1.49771e-05 Jy ! Component: 700 - total flux cleaned = -9.14909e-05 Jy ! Component: 750 - total flux cleaned = -0.000204225 Jy ! Component: 800 - total flux cleaned = -0.000422776 Jy ! Component: 850 - total flux cleaned = -0.000494063 Jy ! Component: 900 - total flux cleaned = -0.000634758 Jy ! Component: 950 - total flux cleaned = -0.000840448 Jy ! Component: 1000 - total flux cleaned = -0.000840099 Jy ! Component: 1050 - total flux cleaned = -0.000939326 Jy ! Component: 1100 - total flux cleaned = -0.000971206 Jy ! Component: 1150 - total flux cleaned = -0.000875336 Jy ! Component: 1200 - total flux cleaned = -0.00103173 Jy ! Component: 1250 - total flux cleaned = -0.00103108 Jy ! Component: 1300 - total flux cleaned = -0.00106112 Jy ! Component: 1350 - total flux cleaned = -0.00118082 Jy ! Component: 1400 - total flux cleaned = -0.001269 Jy ! Component: 1450 - total flux cleaned = -0.0013562 Jy ! Component: 1500 - total flux cleaned = -0.00144204 Jy ! Component: 1550 - total flux cleaned = -0.00155456 Jy ! Component: 1600 - total flux cleaned = -0.00160985 Jy ! Component: 1650 - total flux cleaned = -0.00171926 Jy ! Component: 1700 - total flux cleaned = -0.00174652 Jy ! Component: 1750 - total flux cleaned = -0.00182733 Jy ! Component: 1800 - total flux cleaned = -0.00190681 Jy ! Component: 1850 - total flux cleaned = -0.00198418 Jy ! Component: 1900 - total flux cleaned = -0.0019079 Jy ! Component: 1950 - total flux cleaned = -0.00195882 Jy ! Component: 2000 - total flux cleaned = -0.00205892 Jy ! Component: 2050 - total flux cleaned = -0.00215759 Jy ! Component: 2100 - total flux cleaned = -0.00218214 Jy ! Component: 2150 - total flux cleaned = -0.00223045 Jy ! Component: 2200 - total flux cleaned = -0.00234931 Jy ! Component: 2250 - total flux cleaned = -0.00232558 Jy ! Component: 2300 - total flux cleaned = -0.0023255 Jy ! Component: 2350 - total flux cleaned = -0.00234845 Jy ! Component: 2400 - total flux cleaned = -0.00234838 Jy ! Component: 2450 - total flux cleaned = -0.00248415 Jy ! Component: 2500 - total flux cleaned = -0.00252866 Jy ! Component: 2550 - total flux cleaned = -0.00257249 Jy ! Component: 2600 - total flux cleaned = -0.00252888 Jy ! Component: 2650 - total flux cleaned = -0.00250687 Jy ! Component: 2700 - total flux cleaned = -0.00250686 Jy ! Component: 2750 - total flux cleaned = -0.00252821 Jy ! Component: 2800 - total flux cleaned = -0.00252828 Jy ! Component: 2850 - total flux cleaned = -0.00248624 Jy ! Component: 2900 - total flux cleaned = -0.00246557 Jy ! Component: 2950 - total flux cleaned = -0.00250676 Jy ! Component: 3000 - total flux cleaned = -0.00252718 Jy ! Component: 3050 - total flux cleaned = -0.00244592 Jy ! Component: 3100 - total flux cleaned = -0.00248632 Jy ! Component: 3150 - total flux cleaned = -0.00248619 Jy ! Component: 3200 - total flux cleaned = -0.00246631 Jy ! Component: 3250 - total flux cleaned = -0.00250561 Jy ! Component: 3300 - total flux cleaned = -0.00254468 Jy ! Component: 3350 - total flux cleaned = -0.00256397 Jy ! Component: 3400 - total flux cleaned = -0.00256383 Jy ! Component: 3450 - total flux cleaned = -0.00252574 Jy ! Component: 3500 - total flux cleaned = -0.002564 Jy ! Component: 3550 - total flux cleaned = -0.00258278 Jy ! Component: 3600 - total flux cleaned = -0.00260145 Jy ! Component: 3650 - total flux cleaned = -0.00262005 Jy ! Component: 3700 - total flux cleaned = -0.00265702 Jy ! Component: 3750 - total flux cleaned = -0.00267526 Jy ! Component: 3800 - total flux cleaned = -0.00262068 Jy ! Component: 3850 - total flux cleaned = -0.00271121 Jy ! Component: 3900 - total flux cleaned = -0.00274707 Jy ! Component: 3950 - total flux cleaned = -0.00276494 Jy ! Component: 4000 - total flux cleaned = -0.0028005 Jy ! Component: 4050 - total flux cleaned = -0.0028183 Jy ! Total flux subtracted in 4096 components = -0.00288854 Jy ! Clean residual min=-0.000971 max=0.001145 Jy/beam ! Clean residual mean=0.000000 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.147671 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 296 components and 0.147671 Jy ![Exited script file: muppet] wmap "J1434-1146_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 7.802 at 3.142 degrees (North through East) ! Clean map min=-0.0021412 max=0.14976 Jy/beam ! Writing clean map to FITS file: J1434-1146_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000302774 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.606531 0.606531 1.21306 2.42612 4.85224 9.70449 19.409 38.818 77.6359 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 7.802 at 3.142 degrees (North through East) ! Clean map min=-0.0021412 max=0.14976 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1434-1146_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:26 2019