! Started logfile: J1434+1952_S_2017_08_05_pus_uvs.log on Thu May 9 19:31:15 2019 obs J1434+1952_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1434+1952_S_2017_08_05_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712222 visibilities/baseline/integration-bin. ! Found source: J1434+1952 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 2564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1434+1952_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.872706Jy sigma=0.008382 ! Fit after self-cal, rms=0.865005Jy sigma=0.008327 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=7.073 mas, bpa=-12.15 degrees ! Estimated noise=1972.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100101 Jy ! Component: 100 - total flux cleaned = 0.128044 Jy ! Total flux subtracted in 100 components = 0.128044 Jy ! Clean residual min=-0.010486 max=0.018132 Jy/beam ! Clean residual mean=-0.000004 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 0.128043 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.128043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093548Jy sigma=0.000801 ! Fit after self-cal, rms=0.093531Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.622 mas, bpa=-10.91 degrees ! Estimated noise=1747.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214224 Jy ! Component: 100 - total flux cleaned = 0.0344542 Jy ! Component: 150 - total flux cleaned = 0.041012 Jy ! Component: 200 - total flux cleaned = 0.0449891 Jy ! Total flux subtracted in 200 components = 0.0449891 Jy ! Clean residual min=-0.009158 max=0.011331 Jy/beam ! Clean residual mean=-0.000018 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.173033 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 57 components and 0.173033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086948Jy sigma=0.000746 ! Fit after self-cal, rms=0.086657Jy sigma=0.000743 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* HN 0.93 KP 0.99 ! LA 0.96 MK 1.03 NL 0.91 OV 0.94 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 0.99 ! LA 0.93 MK 0.99 NL 1.10 OV 1.04 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.92 KP 0.85 ! LA 0.71 MK 1.02 NL 1.39 OV 0.95 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.88 KP 1.00* ! LA 0.66 MK 1.19 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.086657Jy sigma=0.000743 ! Fit after self-cal, rms=0.079945Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=7.737 mas, bpa=-10.67 degrees ! Estimated noise=1703.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174912 Jy ! Component: 100 - total flux cleaned = -0.00237181 Jy ! Component: 150 - total flux cleaned = -0.00307188 Jy ! Component: 200 - total flux cleaned = -0.00338255 Jy ! Total flux subtracted in 200 components = -0.00338255 Jy ! Clean residual min=-0.007687 max=0.006872 Jy/beam ! Clean residual mean=-0.000016 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.16965 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 83 components and 0.16965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078878Jy sigma=0.000702 ! Fit after self-cal, rms=0.078742Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078742Jy sigma=0.000701 ! Fit after self-cal, rms=0.097201Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.864 mas, bpa=-11.28 degrees ! Estimated noise=1738.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132225 Jy ! Component: 100 - total flux cleaned = 0.00148324 Jy ! Component: 150 - total flux cleaned = 0.00155332 Jy ! Component: 200 - total flux cleaned = 0.00167881 Jy ! Total flux subtracted in 200 components = 0.00167881 Jy ! Clean residual min=-0.004794 max=0.005088 Jy/beam ! Clean residual mean=-0.000018 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.171329 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.171329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097070Jy sigma=0.000670 ! Fit after self-cal, rms=0.097250Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.19709e-05 Jy ! Component: 100 - total flux cleaned = 0.000139679 Jy ! Component: 150 - total flux cleaned = 0.00019339 Jy ! Component: 200 - total flux cleaned = 0.000143565 Jy ! Total flux subtracted in 200 components = 0.000143565 Jy ! Clean residual min=-0.004666 max=0.004994 Jy/beam ! Clean residual mean=-0.000018 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.171472 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.171472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097169Jy sigma=0.000669 ! Fit after self-cal, rms=0.097172Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097172Jy sigma=0.000669 ! Fit after self-cal, rms=0.102378Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.856 mas, bpa=-11.36 degrees ! Estimated noise=1738.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174997 Jy ! Component: 100 - total flux cleaned = 0.000411802 Jy ! Component: 150 - total flux cleaned = 0.000627773 Jy ! Component: 200 - total flux cleaned = 0.00067755 Jy ! Total flux subtracted in 200 components = 0.00067755 Jy ! Clean residual min=-0.004679 max=0.004980 Jy/beam ! Clean residual mean=-0.000019 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.17215 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.17215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102305Jy sigma=0.000668 ! Fit after self-cal, rms=0.102324Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-120, -107.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502422 Jy ! Component: 100 - total flux cleaned = 0.00584602 Jy ! Component: 150 - total flux cleaned = 0.00646518 Jy ! Component: 200 - total flux cleaned = 0.00715451 Jy ! Total flux subtracted in 200 components = 0.00715451 Jy ! Clean residual min=-0.004311 max=0.004373 Jy/beam ! Clean residual mean=-0.000002 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.179305 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 143 components and 0.179305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101923Jy sigma=0.000665 ! Fit after self-cal, rms=0.101866Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101866Jy sigma=0.000664 ! Fit after self-cal, rms=0.101378Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.07 mas, bmaj=11.55 mas, bpa=-13.5 degrees ! Estimated noise=2204.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263233 Jy ! Component: 100 - total flux cleaned = 0.00365949 Jy ! Component: 150 - total flux cleaned = 0.0040851 Jy ! Component: 200 - total flux cleaned = 0.00432449 Jy ! Total flux subtracted in 200 components = 0.00432449 Jy ! Clean residual min=-0.004282 max=0.004627 Jy/beam ! Clean residual mean=-0.000015 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.183629 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 161 components and 0.183629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101321Jy sigma=0.000663 ! Fit after self-cal, rms=0.101478Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466542 Jy ! Component: 100 - total flux cleaned = 0.000470579 Jy ! Component: 150 - total flux cleaned = 0.000526318 Jy ! Component: 200 - total flux cleaned = 0.000573516 Jy ! Total flux subtracted in 200 components = 0.000573516 Jy ! Clean residual min=-0.004510 max=0.004976 Jy/beam ! Clean residual mean=-0.000018 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.184203 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 0.184203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101423Jy sigma=0.000663 ! Fit after self-cal, rms=0.101396Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=7.852 mas, bpa=-11.4 degrees ! Estimated noise=1732.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.007 x 7.852 at -11.4 degrees (North through East) ! Clean map min=-0.0051851 max=0.12569 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=7.284 mas, bpa=-12.82 degrees ! Estimated noise=2003.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100711 Jy ! Component: 100 - total flux cleaned = 0.130856 Jy ! Component: 150 - total flux cleaned = 0.145826 Jy ! Component: 200 - total flux cleaned = 0.155702 Jy ! Total flux subtracted in 200 components = 0.155702 Jy ! Clean residual min=-0.006766 max=0.008656 Jy/beam ! Clean residual mean=-0.000003 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.155702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.155702 Jy ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=7.852 mas, bpa=-11.4 degrees ! Estimated noise=1732.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968052 Jy ! Component: 100 - total flux cleaned = 0.0158595 Jy ! Component: 150 - total flux cleaned = 0.0204672 Jy ! Component: 200 - total flux cleaned = 0.0230796 Jy ! Total flux subtracted in 200 components = 0.0230796 Jy ! Clean residual min=-0.004859 max=0.003976 Jy/beam ! Clean residual mean=-0.000009 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.178781 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 64 components and 0.178782 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.07 mas, bmaj=11.55 mas, bpa=-13.5 degrees ! Estimated noise=2204.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372768 Jy ! Component: 100 - total flux cleaned = 0.00500317 Jy ! Component: 150 - total flux cleaned = 0.00539557 Jy ! Component: 200 - total flux cleaned = 0.0057331 Jy ! Total flux subtracted in 200 components = 0.0057331 Jy ! Clean residual min=-0.004424 max=0.004572 Jy/beam ! Clean residual mean=-0.000021 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.184515 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.52418e-07 Jy ! Component: 100 - total flux cleaned = -2.65765e-07 Jy ! Component: 150 - total flux cleaned = 1.4745e-06 Jy ! Component: 200 - total flux cleaned = 1.90531e-06 Jy ! Total flux subtracted in 200 components = 1.90531e-06 Jy ! Clean residual min=-0.004381 max=0.004521 Jy/beam ! Clean residual mean=-0.000020 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.184517 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 113 components and 0.184517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=7.852 mas, bpa=-11.4 degrees ! Estimated noise=1732.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151411 Jy ! Component: 100 - total flux cleaned = -0.0017083 Jy ! Component: 150 - total flux cleaned = -0.00162922 Jy ! Component: 200 - total flux cleaned = -0.00147096 Jy ! Total flux subtracted in 200 components = -0.00147096 Jy ! Clean residual min=-0.004892 max=0.003750 Jy/beam ! Clean residual mean=-0.000011 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.183046 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 0.183046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101426Jy sigma=0.000662 ! Fit after self-cal, rms=0.101317Jy sigma=0.000662 wmodel J1434+1952_S_2017_08_05_pus_map.mod ! Writing 139 model components to file: J1434+1952_S_2017_08_05_pus_map.mod wobs J1434+1952_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1434+1952_S_2017_08_05_pus_uvs.fits wwins J1434+1952_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J1434+1952_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150296 Jy ! Component: 100 - total flux cleaned = -0.0023928 Jy ! Component: 150 - total flux cleaned = -0.00297047 Jy ! Component: 200 - total flux cleaned = -0.00327587 Jy ! Component: 250 - total flux cleaned = -0.00339339 Jy ! Component: 300 - total flux cleaned = -0.0035067 Jy ! Component: 350 - total flux cleaned = -0.00361671 Jy ! Component: 400 - total flux cleaned = -0.00383134 Jy ! Component: 450 - total flux cleaned = -0.00388467 Jy ! Component: 500 - total flux cleaned = -0.00398807 Jy ! Component: 550 - total flux cleaned = -0.0041894 Jy ! Component: 600 - total flux cleaned = -0.00414156 Jy ! Component: 650 - total flux cleaned = -0.00414367 Jy ! Component: 700 - total flux cleaned = -0.0041444 Jy ! Component: 750 - total flux cleaned = -0.00395969 Jy ! Component: 800 - total flux cleaned = -0.00377865 Jy ! Component: 850 - total flux cleaned = -0.00364486 Jy ! Component: 900 - total flux cleaned = -0.00338351 Jy ! Component: 950 - total flux cleaned = -0.00329823 Jy ! Component: 1000 - total flux cleaned = -0.00312944 Jy ! Component: 1050 - total flux cleaned = -0.00292155 Jy ! Component: 1100 - total flux cleaned = -0.00292099 Jy ! Component: 1150 - total flux cleaned = -0.00267771 Jy ! Component: 1200 - total flux cleaned = -0.00247736 Jy ! Component: 1250 - total flux cleaned = -0.00231922 Jy ! Component: 1300 - total flux cleaned = -0.0020857 Jy ! Component: 1350 - total flux cleaned = -0.00185599 Jy ! Component: 1400 - total flux cleaned = -0.00178111 Jy ! Component: 1450 - total flux cleaned = -0.00166912 Jy ! Component: 1500 - total flux cleaned = -0.00148437 Jy ! Component: 1550 - total flux cleaned = -0.0014112 Jy ! Component: 1600 - total flux cleaned = -0.00126686 Jy ! Component: 1650 - total flux cleaned = -0.00115985 Jy ! Component: 1700 - total flux cleaned = -0.00112489 Jy ! Component: 1750 - total flux cleaned = -0.00115936 Jy ! Component: 1800 - total flux cleaned = -0.0010552 Jy ! Component: 1850 - total flux cleaned = -0.00108919 Jy ! Component: 1900 - total flux cleaned = -0.000987234 Jy ! Component: 1950 - total flux cleaned = -0.000920059 Jy ! Component: 2000 - total flux cleaned = -0.000886514 Jy ! Component: 2050 - total flux cleaned = -0.000787598 Jy ! Component: 2100 - total flux cleaned = -0.000787648 Jy ! Component: 2150 - total flux cleaned = -0.000787632 Jy ! Component: 2200 - total flux cleaned = -0.000691111 Jy ! Component: 2250 - total flux cleaned = -0.00065947 Jy ! Component: 2300 - total flux cleaned = -0.000659711 Jy ! Component: 2350 - total flux cleaned = -0.000690887 Jy ! Component: 2400 - total flux cleaned = -0.000628738 Jy ! Component: 2450 - total flux cleaned = -0.000659316 Jy ! Component: 2500 - total flux cleaned = -0.000567746 Jy ! Component: 2550 - total flux cleaned = -0.000537579 Jy ! Component: 2600 - total flux cleaned = -0.000507349 Jy ! Component: 2650 - total flux cleaned = -0.00044751 Jy ! Component: 2700 - total flux cleaned = -0.000477057 Jy ! Component: 2750 - total flux cleaned = -0.000330214 Jy ! Component: 2800 - total flux cleaned = -0.000301066 Jy ! Component: 2850 - total flux cleaned = -0.000185527 Jy ! Component: 2900 - total flux cleaned = -9.93848e-05 Jy ! Component: 2950 - total flux cleaned = -9.9472e-05 Jy ! Component: 3000 - total flux cleaned = -4.26575e-05 Jy ! Component: 3050 - total flux cleaned = 1.3626e-05 Jy ! Component: 3100 - total flux cleaned = 0.000125403 Jy ! Component: 3150 - total flux cleaned = 0.000125501 Jy ! Component: 3200 - total flux cleaned = 0.000263302 Jy ! Component: 3250 - total flux cleaned = 0.000317848 Jy ! Component: 3300 - total flux cleaned = 0.000317707 Jy ! Component: 3350 - total flux cleaned = 0.000453245 Jy ! Component: 3400 - total flux cleaned = 0.000480085 Jy ! Component: 3450 - total flux cleaned = 0.00053374 Jy ! Component: 3500 - total flux cleaned = 0.000666809 Jy ! Component: 3550 - total flux cleaned = 0.000719717 Jy ! Component: 3600 - total flux cleaned = 0.000824868 Jy ! Component: 3650 - total flux cleaned = 0.000824897 Jy ! Component: 3700 - total flux cleaned = 0.000903109 Jy ! Component: 3750 - total flux cleaned = 0.000954758 Jy ! Component: 3800 - total flux cleaned = 0.000980424 Jy ! Component: 3850 - total flux cleaned = 0.00108284 Jy ! Component: 3900 - total flux cleaned = 0.00113366 Jy ! Component: 3950 - total flux cleaned = 0.00113345 Jy ! Component: 4000 - total flux cleaned = 0.00118401 Jy ! Component: 4050 - total flux cleaned = 0.00125936 Jy ! Total flux subtracted in 4096 components = 0.0013344 Jy ! Clean residual min=-0.001671 max=0.001544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.18438 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 402 components and 0.18438 Jy ![Exited script file: muppet] wmap "J1434+1952_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.007 x 7.852 at -11.4 degrees (North through East) ! Clean map min=-0.0032742 max=0.1264 Jy/beam ! Writing clean map to FITS file: J1434+1952_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000436627 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0363 1.0363 2.07259 4.14518 8.29037 16.5807 33.1615 66.3229 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.007 x 7.852 at -11.4 degrees (North through East) ! Clean map min=-0.0032742 max=0.1264 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1434+1952_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:31:20 2019