! Started logfile: J1433-1548_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:17 2019 obs J1433-1548_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1433-1548_S_2017_05_27_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772121 visibilities/baseline/integration-bin. ! Found source: J1433-1548 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 7644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1433-1548_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.515921Jy sigma=0.074630 ! Fit after self-cal, rms=0.493417Jy sigma=0.074389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=8.389 mas, bpa=-21.28 degrees ! Estimated noise=446.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126193 Jy ! Component: 100 - total flux cleaned = 0.192488 Jy ! Total flux subtracted in 100 components = 0.192488 Jy ! Clean residual min=-0.052840 max=0.064323 Jy/beam ! Clean residual mean=0.000902 rms=0.017759 Jy/beam ! Combined flux in latest and established models = 0.192488 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.192488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577603Jy sigma=0.009792 ! Fit after self-cal, rms=0.577017Jy sigma=0.009790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=9.196 mas, bpa=-22.32 degrees ! Estimated noise=390.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489384 Jy ! Component: 100 - total flux cleaned = 0.0516547 Jy ! Component: 150 - total flux cleaned = 0.0516088 Jy ! Component: 200 - total flux cleaned = 0.0505907 Jy ! Total flux subtracted in 200 components = 0.0505907 Jy ! Clean residual min=-0.064283 max=0.073135 Jy/beam ! Clean residual mean=0.000744 rms=0.022806 Jy/beam ! Combined flux in latest and established models = 0.243078 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.243078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534807Jy sigma=0.012287 ! Fit after self-cal, rms=0.534644Jy sigma=0.012286 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 0.53 HN 0.60 KP 0.58 ! LA 0.57 MK 0.05 NL 0.60 OV 0.63 ! PT 0.59 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.55 HN 0.62 KP 0.56 ! LA 0.55 MK 11.35 NL 0.66 OV 0.65 ! PT 0.57 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.59 HN 0.62 KP 0.57 ! LA 0.57 MK 0.08 NL 0.65 OV 0.58 ! PT 0.55 SC 0.90 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.57 HN 0.50 KP 1.00* ! LA 40.68 MK 0.27 NL 1.00* OV 1.00* ! PT 0.63 SC 1.00* ! ! ! Fit before self-cal, rms=0.534644Jy sigma=0.012286 ! Fit after self-cal, rms=0.066215Jy sigma=0.000982 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.794 mas, bpa=-17.88 degrees ! Estimated noise=452.037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00536886 Jy ! Component: 100 - total flux cleaned = -0.00654525 Jy ! Component: 150 - total flux cleaned = -0.0076989 Jy ! Component: 200 - total flux cleaned = -0.00802256 Jy ! Total flux subtracted in 200 components = -0.00802256 Jy ! Clean residual min=-0.009738 max=0.008883 Jy/beam ! Clean residual mean=-0.000017 rms=0.002093 Jy/beam ! Combined flux in latest and established models = 0.235056 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.235056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064411Jy sigma=0.000940 ! Fit after self-cal, rms=0.064036Jy sigma=0.000920 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064036Jy sigma=0.000920 ! Fit after self-cal, rms=0.060078Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.831 mas, bpa=-17.05 degrees ! Estimated noise=462.067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708388 Jy ! Component: 100 - total flux cleaned = 0.00125991 Jy ! Component: 150 - total flux cleaned = 0.00161596 Jy ! Component: 200 - total flux cleaned = 0.00192888 Jy ! Total flux subtracted in 200 components = 0.00192888 Jy ! Clean residual min=-0.004785 max=0.005472 Jy/beam ! Clean residual mean=-0.000001 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.236985 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.236985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059434Jy sigma=0.000761 ! Fit after self-cal, rms=0.059520Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278326 Jy ! Component: 100 - total flux cleaned = 0.00250534 Jy ! Component: 150 - total flux cleaned = 0.00238935 Jy ! Component: 200 - total flux cleaned = 0.00218513 Jy ! Total flux subtracted in 200 components = 0.00218513 Jy ! Clean residual min=-0.004114 max=0.004610 Jy/beam ! Clean residual mean=0.000001 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.23917 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.23917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058731Jy sigma=0.000736 ! Fit after self-cal, rms=0.058710Jy sigma=0.000735 ! Inverting map ! Added new window around map position (26, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199287 Jy ! Component: 100 - total flux cleaned = 0.00187485 Jy ! Component: 150 - total flux cleaned = 0.00187726 Jy ! Component: 200 - total flux cleaned = 0.00170359 Jy ! Total flux subtracted in 200 components = 0.00170359 Jy ! Clean residual min=-0.003671 max=0.003279 Jy/beam ! Clean residual mean=-0.000001 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.240873 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 65 components and 0.240873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058156Jy sigma=0.000720 ! Fit after self-cal, rms=0.058129Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058129Jy sigma=0.000720 ! Fit after self-cal, rms=0.057451Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=7.82 mas, bpa=-16.48 degrees ! Estimated noise=466.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293138 Jy ! Component: 100 - total flux cleaned = 0.00072324 Jy ! Component: 150 - total flux cleaned = 0.000798518 Jy ! Component: 200 - total flux cleaned = 0.000799989 Jy ! Total flux subtracted in 200 components = 0.000799989 Jy ! Clean residual min=-0.003282 max=0.003083 Jy/beam ! Clean residual mean=-0.000001 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.241673 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 70 components and 0.241673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057140Jy sigma=0.000710 ! Fit after self-cal, rms=0.057133Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.64362e-05 Jy ! Component: 100 - total flux cleaned = 6.55506e-05 Jy ! Component: 150 - total flux cleaned = 6.49021e-05 Jy ! Component: 200 - total flux cleaned = 4.24959e-06 Jy ! Total flux subtracted in 200 components = 4.24959e-06 Jy ! Clean residual min=-0.003056 max=0.002857 Jy/beam ! Clean residual mean=-0.000001 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.241678 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 79 components and 0.241678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056940Jy sigma=0.000705 ! Fit after self-cal, rms=0.056939Jy sigma=0.000705 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056939Jy sigma=0.000705 ! Fit after self-cal, rms=0.056690Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=14.66 mas, bpa=-8.678 degrees ! Estimated noise=614.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425099 Jy ! Component: 100 - total flux cleaned = 0.000110145 Jy ! Component: 150 - total flux cleaned = -4.95129e-05 Jy ! Component: 200 - total flux cleaned = -9.68116e-05 Jy ! Total flux subtracted in 200 components = -9.68116e-05 Jy ! Clean residual min=-0.002566 max=0.003112 Jy/beam ! Clean residual mean=0.000000 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.241581 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.241581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056574Jy sigma=0.000705 ! Fit after self-cal, rms=0.056563Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011811 Jy ! Component: 100 - total flux cleaned = -0.000209648 Jy ! Component: 150 - total flux cleaned = -0.000292412 Jy ! Component: 200 - total flux cleaned = -0.000293132 Jy ! Total flux subtracted in 200 components = -0.000293132 Jy ! Clean residual min=-0.002483 max=0.003042 Jy/beam ! Clean residual mean=-0.000000 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.241288 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.241288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056510Jy sigma=0.000706 ! Fit after self-cal, rms=0.056510Jy sigma=0.000706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.816 mas, bpa=-16.24 degrees ! Estimated noise=468.233 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.816 at -16.24 degrees (North through East) ! Clean map min=-0.0075412 max=0.19115 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=6.832 mas, bpa=-17.09 degrees ! Estimated noise=573.141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149171 Jy ! Component: 100 - total flux cleaned = 0.210299 Jy ! Component: 150 - total flux cleaned = 0.239409 Jy ! Component: 200 - total flux cleaned = 0.245062 Jy ! Total flux subtracted in 200 components = 0.245062 Jy ! Clean residual min=-0.011445 max=0.009866 Jy/beam ! Clean residual mean=0.000005 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.245062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.245062 Jy ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.816 mas, bpa=-16.24 degrees ! Estimated noise=468.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000886613 Jy ! Component: 100 - total flux cleaned = -0.00121657 Jy ! Component: 150 - total flux cleaned = -0.00235404 Jy ! Component: 200 - total flux cleaned = -0.00310679 Jy ! Total flux subtracted in 200 components = -0.00310679 Jy ! Clean residual min=-0.006500 max=0.005400 Jy/beam ! Clean residual mean=0.000005 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.241955 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.241955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=14.66 mas, bpa=-8.678 degrees ! Estimated noise=614.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210054 Jy ! Component: 100 - total flux cleaned = 0.0026305 Jy ! Component: 150 - total flux cleaned = 0.00285821 Jy ! Component: 200 - total flux cleaned = 0.00276031 Jy ! Total flux subtracted in 200 components = 0.00276031 Jy ! Clean residual min=-0.003916 max=0.003899 Jy/beam ! Clean residual mean=0.000003 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.244715 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.78031e-05 Jy ! Component: 100 - total flux cleaned = -8.67918e-05 Jy ! Component: 150 - total flux cleaned = -0.000165789 Jy ! Component: 200 - total flux cleaned = -0.000246322 Jy ! Total flux subtracted in 200 components = -0.000246322 Jy ! Clean residual min=-0.003478 max=0.003571 Jy/beam ! Clean residual mean=0.000003 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.244469 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 61 components and 0.244469 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.816 mas, bpa=-16.24 degrees ! Estimated noise=468.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287518 Jy ! Component: 100 - total flux cleaned = 0.000779039 Jy ! Component: 150 - total flux cleaned = 0.00078236 Jy ! Component: 200 - total flux cleaned = 0.00051397 Jy ! Total flux subtracted in 200 components = 0.00051397 Jy ! Clean residual min=-0.004026 max=0.004382 Jy/beam ! Clean residual mean=0.000000 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.244983 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.244983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057951Jy sigma=0.000730 ! Fit after self-cal, rms=0.057952Jy sigma=0.000729 wmodel J1433-1548_S_2017_05_27_pus_map.mod ! Writing 72 model components to file: J1433-1548_S_2017_05_27_pus_map.mod wobs J1433-1548_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1433-1548_S_2017_05_27_pus_uvs.fits wwins J1433-1548_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1433-1548_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.31384e-05 Jy ! Component: 100 - total flux cleaned = 1.67296e-05 Jy ! Component: 150 - total flux cleaned = 1.73785e-05 Jy ! Component: 200 - total flux cleaned = 0.000192071 Jy ! Component: 250 - total flux cleaned = 0.000413296 Jy ! Component: 300 - total flux cleaned = 0.000571027 Jy ! Component: 350 - total flux cleaned = 0.000722727 Jy ! Component: 400 - total flux cleaned = 0.000772567 Jy ! Component: 450 - total flux cleaned = 0.000957038 Jy ! Component: 500 - total flux cleaned = 0.00113258 Jy ! Component: 550 - total flux cleaned = 0.00121648 Jy ! Component: 600 - total flux cleaned = 0.00129778 Jy ! Component: 650 - total flux cleaned = 0.00141663 Jy ! Component: 700 - total flux cleaned = 0.0014158 Jy ! Component: 750 - total flux cleaned = 0.00145249 Jy ! Component: 800 - total flux cleaned = 0.00145197 Jy ! Component: 850 - total flux cleaned = 0.00148785 Jy ! Component: 900 - total flux cleaned = 0.00159135 Jy ! Component: 950 - total flux cleaned = 0.00169146 Jy ! Component: 1000 - total flux cleaned = 0.00162531 Jy ! Component: 1050 - total flux cleaned = 0.00165864 Jy ! Component: 1100 - total flux cleaned = 0.00175338 Jy ! Component: 1150 - total flux cleaned = 0.00181533 Jy ! Component: 1200 - total flux cleaned = 0.0018446 Jy ! Component: 1250 - total flux cleaned = 0.00184455 Jy ! Component: 1300 - total flux cleaned = 0.00181627 Jy ! Component: 1350 - total flux cleaned = 0.00190121 Jy ! Component: 1400 - total flux cleaned = 0.0019288 Jy ! Component: 1450 - total flux cleaned = 0.00195598 Jy ! Component: 1500 - total flux cleaned = 0.00195613 Jy ! Component: 1550 - total flux cleaned = 0.00195567 Jy ! Component: 1600 - total flux cleaned = 0.00193013 Jy ! Component: 1650 - total flux cleaned = 0.00200572 Jy ! Component: 1700 - total flux cleaned = 0.00198087 Jy ! Component: 1750 - total flux cleaned = 0.00202898 Jy ! Component: 1800 - total flux cleaned = 0.00198128 Jy ! Component: 1850 - total flux cleaned = 0.0020283 Jy ! Component: 1900 - total flux cleaned = 0.00200535 Jy ! Component: 1950 - total flux cleaned = 0.00211893 Jy ! Component: 2000 - total flux cleaned = 0.00223038 Jy ! Component: 2050 - total flux cleaned = 0.00220806 Jy ! Component: 2100 - total flux cleaned = 0.00233806 Jy ! Component: 2150 - total flux cleaned = 0.00231684 Jy ! Component: 2200 - total flux cleaned = 0.00235945 Jy ! Component: 2250 - total flux cleaned = 0.00242229 Jy ! Component: 2300 - total flux cleaned = 0.0024637 Jy ! Component: 2350 - total flux cleaned = 0.00258507 Jy ! Component: 2400 - total flux cleaned = 0.00258454 Jy ! Component: 2450 - total flux cleaned = 0.00260416 Jy ! Component: 2500 - total flux cleaned = 0.00258468 Jy ! Component: 2550 - total flux cleaned = 0.00258483 Jy ! Component: 2600 - total flux cleaned = 0.00264175 Jy ! Component: 2650 - total flux cleaned = 0.00260425 Jy ! Component: 2700 - total flux cleaned = 0.00262275 Jy ! Component: 2750 - total flux cleaned = 0.00262256 Jy ! Component: 2800 - total flux cleaned = 0.00264078 Jy ! Component: 2850 - total flux cleaned = 0.00265851 Jy ! Component: 2900 - total flux cleaned = 0.00271111 Jy ! Component: 2950 - total flux cleaned = 0.0027112 Jy ! Component: 3000 - total flux cleaned = 0.00272841 Jy ! Component: 3050 - total flux cleaned = 0.00276225 Jy ! Component: 3100 - total flux cleaned = 0.0027623 Jy ! Component: 3150 - total flux cleaned = 0.00274554 Jy ! Component: 3200 - total flux cleaned = 0.00269625 Jy ! Component: 3250 - total flux cleaned = 0.0026801 Jy ! Component: 3300 - total flux cleaned = 0.00271236 Jy ! Component: 3350 - total flux cleaned = 0.00271218 Jy ! Component: 3400 - total flux cleaned = 0.00269649 Jy ! Component: 3450 - total flux cleaned = 0.00268089 Jy ! Component: 3500 - total flux cleaned = 0.00266561 Jy ! Component: 3550 - total flux cleaned = 0.00263501 Jy ! Component: 3600 - total flux cleaned = 0.00263486 Jy ! Component: 3650 - total flux cleaned = 0.0025601 Jy ! Component: 3700 - total flux cleaned = 0.0025453 Jy ! Component: 3750 - total flux cleaned = 0.00247187 Jy ! Component: 3800 - total flux cleaned = 0.00252987 Jy ! Component: 3850 - total flux cleaned = 0.00245769 Jy ! Component: 3900 - total flux cleaned = 0.00242914 Jy ! Component: 3950 - total flux cleaned = 0.00240097 Jy ! Component: 4000 - total flux cleaned = 0.00241514 Jy ! Component: 4050 - total flux cleaned = 0.00235918 Jy ! Total flux subtracted in 4096 components = 0.00229004 Jy ! Clean residual min=-0.000747 max=0.000718 Jy/beam ! Clean residual mean=-0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.247273 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 346 components and 0.247273 Jy ![Exited script file: muppet] wmap "J1433-1548_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.816 at -16.24 degrees (North through East) ! Clean map min=-0.0079063 max=0.19158 Jy/beam ! Writing clean map to FITS file: J1433-1548_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.38258 0.38258 0.765159 1.53032 3.06064 6.12128 12.2426 24.4851 48.9702 97.9404 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 7.816 at -16.24 degrees (North through East) ! Clean map min=-0.0079063 max=0.19158 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1433-1548_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:22 2019