! Started logfile: J1429-2055_S_2017_07_16_pus_uvs.log on Thu May 9 11:11:08 2019 obs J1429-2055_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1429-2055_S_2017_07_16_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.601839 visibilities/baseline/integration-bin. ! Found source: J1429-2055 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 15708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1429-2055_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 373 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 489 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 416 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1450 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995687Jy sigma=0.007327 ! Fit after self-cal, rms=0.945541Jy sigma=0.006991 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=6.527 mas, bpa=-6.453 degrees ! Estimated noise=1426.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447711 Jy ! Component: 100 - total flux cleaned = 0.0546467 Jy ! Total flux subtracted in 100 components = 0.0546467 Jy ! Clean residual min=-0.004059 max=0.005077 Jy/beam ! Clean residual mean=-0.000008 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0546467 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0546467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093706Jy sigma=0.000645 ! Fit after self-cal, rms=0.092437Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.832 mas, bpa=-2.39 degrees ! Estimated noise=989.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496524 Jy ! Component: 100 - total flux cleaned = 0.00632478 Jy ! Component: 150 - total flux cleaned = 0.00638947 Jy ! Component: 200 - total flux cleaned = 0.00641288 Jy ! Total flux subtracted in 200 components = 0.00641288 Jy ! Clean residual min=-0.002526 max=0.002481 Jy/beam ! Clean residual mean=-0.000013 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0610596 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0610596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092166Jy sigma=0.000636 ! Fit after self-cal, rms=0.092144Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.05 KP 1.01 ! LA 1.07 MK 0.98 NL 0.91 OV 1.04 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.10 KP 1.00 ! LA 0.98 MK 1.03 NL 0.94 OV 1.04 ! PT 1.09 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.90 KP 0.96 ! LA 1.02 MK 1.08 NL 0.98 OV 1.02 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.092144Jy sigma=0.000636 ! Fit after self-cal, rms=0.090299Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.822 mas, bpa=-2.158 degrees ! Estimated noise=986.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12795e-05 Jy ! Component: 100 - total flux cleaned = 3.09285e-05 Jy ! Component: 150 - total flux cleaned = 4.91959e-06 Jy ! Component: 200 - total flux cleaned = -1.84399e-05 Jy ! Total flux subtracted in 200 components = -1.84399e-05 Jy ! Clean residual min=-0.002406 max=0.002203 Jy/beam ! Clean residual mean=-0.000008 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0610412 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0610412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090294Jy sigma=0.000635 ! Fit after self-cal, rms=0.090237Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090237Jy sigma=0.000634 ! Fit after self-cal, rms=0.090131Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=7.818 mas, bpa=-2.144 degrees ! Estimated noise=986.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.61991e-05 Jy ! Component: 100 - total flux cleaned = -7.12908e-05 Jy ! Component: 150 - total flux cleaned = -8.50836e-05 Jy ! Component: 200 - total flux cleaned = -0.000111192 Jy ! Total flux subtracted in 200 components = -0.000111192 Jy ! Clean residual min=-0.002290 max=0.002171 Jy/beam ! Clean residual mean=-0.000009 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.06093 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.06093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090127Jy sigma=0.000634 ! Fit after self-cal, rms=0.090106Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.26679e-05 Jy ! Component: 100 - total flux cleaned = 4.2434e-05 Jy ! Component: 150 - total flux cleaned = 3.09445e-05 Jy ! Component: 200 - total flux cleaned = 3.06227e-05 Jy ! Total flux subtracted in 200 components = 3.06227e-05 Jy ! Clean residual min=-0.002288 max=0.002298 Jy/beam ! Clean residual mean=-0.000009 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0609606 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0609606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090102Jy sigma=0.000634 ! Fit after self-cal, rms=0.090103Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090103Jy sigma=0.000634 ! Fit after self-cal, rms=0.089545Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.804 mas, bpa=-2.222 degrees ! Estimated noise=985.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.32446e-05 Jy ! Component: 100 - total flux cleaned = -0.000105103 Jy ! Component: 150 - total flux cleaned = -0.000125005 Jy ! Component: 200 - total flux cleaned = -0.000143748 Jy ! Total flux subtracted in 200 components = -0.000143748 Jy ! Clean residual min=-0.002329 max=0.002199 Jy/beam ! Clean residual mean=-0.000009 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0608168 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0608168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089543Jy sigma=0.000634 ! Fit after self-cal, rms=0.089545Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60474e-05 Jy ! Component: 100 - total flux cleaned = -5.48918e-05 Jy ! Component: 150 - total flux cleaned = -7.1887e-05 Jy ! Component: 200 - total flux cleaned = -8.01635e-05 Jy ! Total flux subtracted in 200 components = -8.01635e-05 Jy ! Clean residual min=-0.002305 max=0.002190 Jy/beam ! Clean residual mean=-0.000009 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0607367 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0607367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089543Jy sigma=0.000634 ! Fit after self-cal, rms=0.089544Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089544Jy sigma=0.000634 ! Fit after self-cal, rms=0.089556Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=18.22 mas, bpa=-5.089 degrees ! Estimated noise=1277.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199758 Jy ! Component: 100 - total flux cleaned = -0.000175211 Jy ! Component: 150 - total flux cleaned = -0.00014305 Jy ! Component: 200 - total flux cleaned = -0.000113856 Jy ! Total flux subtracted in 200 components = -0.000113856 Jy ! Clean residual min=-0.002309 max=0.002987 Jy/beam ! Clean residual mean=-0.000016 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0606228 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.0606228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089558Jy sigma=0.000634 ! Fit after self-cal, rms=0.089567Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.73005e-05 Jy ! Component: 100 - total flux cleaned = -4.62955e-05 Jy ! Component: 150 - total flux cleaned = -1.74223e-05 Jy ! Component: 200 - total flux cleaned = 1.89602e-07 Jy ! Total flux subtracted in 200 components = 1.89602e-07 Jy ! Clean residual min=-0.002328 max=0.002999 Jy/beam ! Clean residual mean=-0.000016 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.060623 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.060623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089570Jy sigma=0.000634 ! Fit after self-cal, rms=0.089565Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.798 mas, bpa=-2.206 degrees ! Estimated noise=985.089 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 7.798 at -2.206 degrees (North through East) ! Clean map min=-0.0022151 max=0.061145 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=6.521 mas, bpa=-6.385 degrees ! Estimated noise=1418.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469761 Jy ! Component: 100 - total flux cleaned = 0.0573308 Jy ! Component: 150 - total flux cleaned = 0.0603853 Jy ! Component: 200 - total flux cleaned = 0.0612301 Jy ! Total flux subtracted in 200 components = 0.0612301 Jy ! Clean residual min=-0.003329 max=0.003264 Jy/beam ! Clean residual mean=-0.000003 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0612301 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0612301 Jy ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.798 mas, bpa=-2.206 degrees ! Estimated noise=985.089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017696 Jy ! Component: 100 - total flux cleaned = -0.000199686 Jy ! Component: 150 - total flux cleaned = -0.000220968 Jy ! Component: 200 - total flux cleaned = -0.000257883 Jy ! Total flux subtracted in 200 components = -0.000257883 Jy ! Clean residual min=-0.002290 max=0.002239 Jy/beam ! Clean residual mean=-0.000009 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0609722 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.0609722 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=18.22 mas, bpa=-5.089 degrees ! Estimated noise=1277.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030137 Jy ! Component: 100 - total flux cleaned = -0.000299134 Jy ! Component: 150 - total flux cleaned = -0.000274669 Jy ! Component: 200 - total flux cleaned = -0.000253529 Jy ! Total flux subtracted in 200 components = -0.000253529 Jy ! Clean residual min=-0.002342 max=0.003007 Jy/beam ! Clean residual mean=-0.000017 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.0607187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.84301e-05 Jy ! Component: 100 - total flux cleaned = 2.63021e-05 Jy ! Component: 150 - total flux cleaned = 3.39776e-05 Jy ! Component: 200 - total flux cleaned = 4.07809e-05 Jy ! Total flux subtracted in 200 components = 4.07809e-05 Jy ! Clean residual min=-0.002325 max=0.003001 Jy/beam ! Clean residual mean=-0.000017 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0607595 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0607595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.798 mas, bpa=-2.206 degrees ! Estimated noise=985.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186208 Jy ! Component: 100 - total flux cleaned = 0.000105684 Jy ! Component: 150 - total flux cleaned = 2.53316e-05 Jy ! Component: 200 - total flux cleaned = -4.4985e-05 Jy ! Total flux subtracted in 200 components = -4.4985e-05 Jy ! Clean residual min=-0.002307 max=0.002235 Jy/beam ! Clean residual mean=-0.000009 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0607145 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0607145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089566Jy sigma=0.000634 ! Fit after self-cal, rms=0.089566Jy sigma=0.000634 wmodel J1429-2055_S_2017_07_16_pus_map.mod ! Writing 50 model components to file: J1429-2055_S_2017_07_16_pus_map.mod wobs J1429-2055_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1429-2055_S_2017_07_16_pus_uvs.fits wwins J1429-2055_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1429-2055_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470977 Jy ! Component: 100 - total flux cleaned = -0.000815562 Jy ! Component: 150 - total flux cleaned = -0.00113796 Jy ! Component: 200 - total flux cleaned = -0.0013089 Jy ! Component: 250 - total flux cleaned = -0.00147068 Jy ! Component: 300 - total flux cleaned = -0.00168604 Jy ! Component: 350 - total flux cleaned = -0.00189371 Jy ! Component: 400 - total flux cleaned = -0.00206564 Jy ! Component: 450 - total flux cleaned = -0.00231424 Jy ! Component: 500 - total flux cleaned = -0.00252651 Jy ! Component: 550 - total flux cleaned = -0.00268113 Jy ! Component: 600 - total flux cleaned = -0.00283048 Jy ! Component: 650 - total flux cleaned = -0.00295109 Jy ! Component: 700 - total flux cleaned = -0.00306851 Jy ! Component: 750 - total flux cleaned = -0.00320625 Jy ! Component: 800 - total flux cleaned = -0.00325125 Jy ! Component: 850 - total flux cleaned = -0.00338219 Jy ! Component: 900 - total flux cleaned = -0.00336087 Jy ! Component: 950 - total flux cleaned = -0.00344468 Jy ! Component: 1000 - total flux cleaned = -0.00346501 Jy ! Component: 1050 - total flux cleaned = -0.00354547 Jy ! Component: 1100 - total flux cleaned = -0.00360444 Jy ! Component: 1150 - total flux cleaned = -0.00362372 Jy ! Component: 1200 - total flux cleaned = -0.00362376 Jy ! Component: 1250 - total flux cleaned = -0.00369813 Jy ! Component: 1300 - total flux cleaned = -0.00366137 Jy ! Component: 1350 - total flux cleaned = -0.00367966 Jy ! Component: 1400 - total flux cleaned = -0.00371539 Jy ! Component: 1450 - total flux cleaned = -0.00371516 Jy ! Component: 1500 - total flux cleaned = -0.00373236 Jy ! Component: 1550 - total flux cleaned = -0.00374914 Jy ! Component: 1600 - total flux cleaned = -0.00371537 Jy ! Component: 1650 - total flux cleaned = -0.00369878 Jy ! Component: 1700 - total flux cleaned = -0.0036987 Jy ! Component: 1750 - total flux cleaned = -0.00368235 Jy ! Component: 1800 - total flux cleaned = -0.00366636 Jy ! Component: 1850 - total flux cleaned = -0.00371363 Jy ! Component: 1900 - total flux cleaned = -0.00371367 Jy ! Component: 1950 - total flux cleaned = -0.00376013 Jy ! Component: 2000 - total flux cleaned = -0.00382087 Jy ! Component: 2050 - total flux cleaned = -0.0038359 Jy ! Component: 2100 - total flux cleaned = -0.00391015 Jy ! Component: 2150 - total flux cleaned = -0.00393953 Jy ! Component: 2200 - total flux cleaned = -0.0039687 Jy ! Component: 2250 - total flux cleaned = -0.00408397 Jy ! Component: 2300 - total flux cleaned = -0.0041267 Jy ! Component: 2350 - total flux cleaned = -0.00418318 Jy ! Component: 2400 - total flux cleaned = -0.004295 Jy ! Component: 2450 - total flux cleaned = -0.0043503 Jy ! Component: 2500 - total flux cleaned = -0.00440511 Jy ! Component: 2550 - total flux cleaned = -0.00448681 Jy ! Component: 2600 - total flux cleaned = -0.00454083 Jy ! Component: 2650 - total flux cleaned = -0.00460778 Jy ! Component: 2700 - total flux cleaned = -0.00467401 Jy ! Component: 2750 - total flux cleaned = -0.00468703 Jy ! Component: 2800 - total flux cleaned = -0.00477844 Jy ! Component: 2850 - total flux cleaned = -0.00484311 Jy ! Component: 2900 - total flux cleaned = -0.00488162 Jy ! Component: 2950 - total flux cleaned = -0.00491998 Jy ! Component: 3000 - total flux cleaned = -0.00499602 Jy ! Component: 3050 - total flux cleaned = -0.00507128 Jy ! Component: 3100 - total flux cleaned = -0.00508362 Jy ! Component: 3150 - total flux cleaned = -0.00513308 Jy ! Component: 3200 - total flux cleaned = -0.00516989 Jy ! Component: 3250 - total flux cleaned = -0.0052063 Jy ! Component: 3300 - total flux cleaned = -0.00521836 Jy ! Component: 3350 - total flux cleaned = -0.00527848 Jy ! Component: 3400 - total flux cleaned = -0.00530228 Jy ! Component: 3450 - total flux cleaned = -0.00534965 Jy ! Component: 3500 - total flux cleaned = -0.00533781 Jy ! Component: 3550 - total flux cleaned = -0.00536117 Jy ! Component: 3600 - total flux cleaned = -0.00539605 Jy ! Component: 3650 - total flux cleaned = -0.00541913 Jy ! Component: 3700 - total flux cleaned = -0.00543057 Jy ! Component: 3750 - total flux cleaned = -0.00545339 Jy ! Component: 3800 - total flux cleaned = -0.00548742 Jy ! Component: 3850 - total flux cleaned = -0.00545364 Jy ! Component: 3900 - total flux cleaned = -0.00550981 Jy ! Component: 3950 - total flux cleaned = -0.00553211 Jy ! Component: 4000 - total flux cleaned = -0.00553226 Jy ! Component: 4050 - total flux cleaned = -0.00557628 Jy ! Total flux subtracted in 4096 components = -0.00557625 Jy ! Clean residual min=-0.000702 max=0.000623 Jy/beam ! Clean residual mean=-0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0551382 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 302 components and 0.0551383 Jy ![Exited script file: muppet] wmap "J1429-2055_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 7.798 at -2.206 degrees (North through East) ! Clean map min=-0.0015953 max=0.061012 Jy/beam ! Writing clean map to FITS file: J1429-2055_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0610121 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180239 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.886244 0.886244 1.77249 3.54498 7.08995 14.1799 28.3598 56.7196 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 7.798 at -2.206 degrees (North through East) ! Clean map min=-0.0015953 max=0.061012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1429-2055_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:11:13 2019