! Started logfile: J1429+6316_S_2017_07_09_pus_uvs.log on Wed May 8 14:51:00 2019 obs J1429+6316_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1429+6316_S_2017_07_09_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958201 visibilities/baseline/integration-bin. ! Found source: J1429+6316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 14488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1429+6316_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 454 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975443Jy sigma=0.008886 ! Fit after self-cal, rms=0.943785Jy sigma=0.008625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=3.59 mas, bpa=-10.58 degrees ! Estimated noise=1121.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0454039 Jy ! Component: 100 - total flux cleaned = 0.0560242 Jy ! Total flux subtracted in 100 components = 0.0560242 Jy ! Clean residual min=-0.003667 max=0.004043 Jy/beam ! Clean residual mean=-0.000011 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0560242 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0560242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077595Jy sigma=0.000662 ! Fit after self-cal, rms=0.077420Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=4.337 mas, bpa=17.76 degrees ! Estimated noise=736.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430186 Jy ! Component: 100 - total flux cleaned = 0.00602526 Jy ! Component: 150 - total flux cleaned = 0.00688966 Jy ! Component: 200 - total flux cleaned = 0.0073782 Jy ! Total flux subtracted in 200 components = 0.0073782 Jy ! Clean residual min=-0.002432 max=0.002258 Jy/beam ! Clean residual mean=-0.000006 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0634024 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.0634024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077177Jy sigma=0.000659 ! Fit after self-cal, rms=0.077174Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.02 KP 0.98 ! LA 1.07 MK 0.97 NL 0.93 OV 1.07 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.01 ! LA 0.99 MK 1.04 NL 1.01 OV 1.09 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.05 KP 0.98 ! LA 0.95 MK 1.05 NL 0.98 OV 0.95 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.94 KP 1.00* ! LA 0.98 MK 0.87 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.077174Jy sigma=0.000659 ! Fit after self-cal, rms=0.077459Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.051 mas, bmaj=4.344 mas, bpa=18.26 degrees ! Estimated noise=739.903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004918 Jy ! Component: 100 - total flux cleaned = 0.000542928 Jy ! Component: 150 - total flux cleaned = 0.000567858 Jy ! Component: 200 - total flux cleaned = 0.000567797 Jy ! Total flux subtracted in 200 components = 0.000567797 Jy ! Clean residual min=-0.002369 max=0.002032 Jy/beam ! Clean residual mean=-0.000008 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0639702 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0639702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077446Jy sigma=0.000658 ! Fit after self-cal, rms=0.077454Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077454Jy sigma=0.000658 ! Fit after self-cal, rms=0.077525Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.061 mas, bmaj=4.332 mas, bpa=20.23 degrees ! Estimated noise=740.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178655 Jy ! Component: 100 - total flux cleaned = 0.000249648 Jy ! Component: 150 - total flux cleaned = 0.000332883 Jy ! Component: 200 - total flux cleaned = 0.000355793 Jy ! Total flux subtracted in 200 components = 0.000355793 Jy ! Clean residual min=-0.001956 max=0.001966 Jy/beam ! Clean residual mean=-0.000010 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.064326 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.064326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077516Jy sigma=0.000656 ! Fit after self-cal, rms=0.077562Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.91331e-05 Jy ! Component: 100 - total flux cleaned = -4.92654e-05 Jy ! Component: 150 - total flux cleaned = -2.99118e-05 Jy ! Component: 200 - total flux cleaned = -2.09265e-05 Jy ! Total flux subtracted in 200 components = -2.09265e-05 Jy ! Clean residual min=-0.001952 max=0.001914 Jy/beam ! Clean residual mean=-0.000009 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0643051 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.0643051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077558Jy sigma=0.000655 ! Fit after self-cal, rms=0.077556Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077556Jy sigma=0.000655 ! Fit after self-cal, rms=0.077798Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.068 mas, bmaj=4.318 mas, bpa=22.7 degrees ! Estimated noise=742.482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219257 Jy ! Component: 100 - total flux cleaned = 0.000298599 Jy ! Component: 150 - total flux cleaned = 0.000320548 Jy ! Component: 200 - total flux cleaned = 0.000320463 Jy ! Total flux subtracted in 200 components = 0.000320463 Jy ! Clean residual min=-0.001941 max=0.001945 Jy/beam ! Clean residual mean=-0.000009 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0646255 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0646255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077792Jy sigma=0.000655 ! Fit after self-cal, rms=0.077794Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8063e-07 Jy ! Component: 100 - total flux cleaned = 1.93758e-05 Jy ! Component: 150 - total flux cleaned = 2.84472e-05 Jy ! Component: 200 - total flux cleaned = 4.59509e-05 Jy ! Total flux subtracted in 200 components = 4.59509e-05 Jy ! Clean residual min=-0.001947 max=0.001932 Jy/beam ! Clean residual mean=-0.000009 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0646715 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0646715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077791Jy sigma=0.000655 ! Fit after self-cal, rms=0.077791Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077791Jy sigma=0.000655 ! Fit after self-cal, rms=0.077910Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.098 mas, bmaj=8.911 mas, bpa=69.87 degrees ! Estimated noise=952.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534433 Jy ! Component: 100 - total flux cleaned = 0.000586959 Jy ! Component: 150 - total flux cleaned = 0.00061258 Jy ! Component: 200 - total flux cleaned = 0.000634789 Jy ! Total flux subtracted in 200 components = 0.000634789 Jy ! Clean residual min=-0.002122 max=0.002326 Jy/beam ! Clean residual mean=-0.000020 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0653062 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.0653062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077909Jy sigma=0.000655 ! Fit after self-cal, rms=0.077908Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.69385e-05 Jy ! Component: 100 - total flux cleaned = 5.8604e-05 Jy ! Component: 150 - total flux cleaned = 7.15699e-05 Jy ! Component: 200 - total flux cleaned = 8.91236e-05 Jy ! Total flux subtracted in 200 components = 8.91236e-05 Jy ! Clean residual min=-0.002117 max=0.002316 Jy/beam ! Clean residual mean=-0.000021 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0653954 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.0653954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077909Jy sigma=0.000655 ! Fit after self-cal, rms=0.077907Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.307 mas, bpa=25.28 degrees ! Estimated noise=744.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.307 at 25.28 degrees (North through East) ! Clean map min=-0.0019003 max=0.058382 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=3.544 mas, bpa=-13.82 degrees ! Estimated noise=1133.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045668 Jy ! Component: 100 - total flux cleaned = 0.0572048 Jy ! Component: 150 - total flux cleaned = 0.0621203 Jy ! Component: 200 - total flux cleaned = 0.0646722 Jy ! Total flux subtracted in 200 components = 0.0646722 Jy ! Clean residual min=-0.003300 max=0.003031 Jy/beam ! Clean residual mean=-0.000008 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0646722 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0646722 Jy ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.307 mas, bpa=25.28 degrees ! Estimated noise=744.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016864 Jy ! Component: 100 - total flux cleaned = 0.000268346 Jy ! Component: 150 - total flux cleaned = 0.000336142 Jy ! Component: 200 - total flux cleaned = 0.000391078 Jy ! Total flux subtracted in 200 components = 0.000391078 Jy ! Clean residual min=-0.001986 max=0.001991 Jy/beam ! Clean residual mean=-0.000010 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0650632 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.0650632 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.098 mas, bmaj=8.911 mas, bpa=69.87 degrees ! Estimated noise=952.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395088 Jy ! Component: 100 - total flux cleaned = 0.000394855 Jy ! Component: 150 - total flux cleaned = 0.000385887 Jy ! Component: 200 - total flux cleaned = 0.000393178 Jy ! Total flux subtracted in 200 components = 0.000393178 Jy ! Clean residual min=-0.002076 max=0.002331 Jy/beam ! Clean residual mean=-0.000021 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0654564 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.11535e-06 Jy ! Component: 100 - total flux cleaned = 7.23775e-06 Jy ! Component: 150 - total flux cleaned = 1.37691e-05 Jy ! Component: 200 - total flux cleaned = 1.95429e-05 Jy ! Total flux subtracted in 200 components = 1.95429e-05 Jy ! Clean residual min=-0.002079 max=0.002320 Jy/beam ! Clean residual mean=-0.000021 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.065476 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.065476 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.307 mas, bpa=25.28 degrees ! Estimated noise=744.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035343 Jy ! Component: 100 - total flux cleaned = -0.000351968 Jy ! Component: 150 - total flux cleaned = -0.000351673 Jy ! Component: 200 - total flux cleaned = -0.000364078 Jy ! Total flux subtracted in 200 components = -0.000364078 Jy ! Clean residual min=-0.001957 max=0.002006 Jy/beam ! Clean residual mean=-0.000010 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0651119 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0651119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077910Jy sigma=0.000655 ! Fit after self-cal, rms=0.077907Jy sigma=0.000655 wmodel J1429+6316_S_2017_07_09_pus_map.mod ! Writing 38 model components to file: J1429+6316_S_2017_07_09_pus_map.mod wobs J1429+6316_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1429+6316_S_2017_07_09_pus_uvs.fits wwins J1429+6316_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1429+6316_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110042 Jy ! Component: 100 - total flux cleaned = -4.4711e-05 Jy ! Component: 150 - total flux cleaned = -1.2519e-05 Jy ! Component: 200 - total flux cleaned = 1.84977e-05 Jy ! Component: 250 - total flux cleaned = -7.19785e-05 Jy ! Component: 300 - total flux cleaned = -0.000130119 Jy ! Component: 350 - total flux cleaned = -0.000129358 Jy ! Component: 400 - total flux cleaned = -0.000184767 Jy ! Component: 450 - total flux cleaned = -0.000293298 Jy ! Component: 500 - total flux cleaned = -0.000373241 Jy ! Component: 550 - total flux cleaned = -0.000451467 Jy ! Component: 600 - total flux cleaned = -0.000502701 Jy ! Component: 650 - total flux cleaned = -0.000653496 Jy ! Component: 700 - total flux cleaned = -0.000727249 Jy ! Component: 750 - total flux cleaned = -0.000775697 Jy ! Component: 800 - total flux cleaned = -0.000919385 Jy ! Component: 850 - total flux cleaned = -0.000990159 Jy ! Component: 900 - total flux cleaned = -0.0010831 Jy ! Component: 950 - total flux cleaned = -0.00108307 Jy ! Component: 1000 - total flux cleaned = -0.0011061 Jy ! Component: 1050 - total flux cleaned = -0.00121801 Jy ! Component: 1100 - total flux cleaned = -0.00121811 Jy ! Component: 1150 - total flux cleaned = -0.00128371 Jy ! Component: 1200 - total flux cleaned = -0.0013481 Jy ! Component: 1250 - total flux cleaned = -0.00136926 Jy ! Component: 1300 - total flux cleaned = -0.00147478 Jy ! Component: 1350 - total flux cleaned = -0.00149546 Jy ! Component: 1400 - total flux cleaned = -0.00157811 Jy ! Component: 1450 - total flux cleaned = -0.00168015 Jy ! Component: 1500 - total flux cleaned = -0.00172062 Jy ! Component: 1550 - total flux cleaned = -0.00184101 Jy ! Component: 1600 - total flux cleaned = -0.00192011 Jy ! Component: 1650 - total flux cleaned = -0.00203764 Jy ! Component: 1700 - total flux cleaned = -0.00213442 Jy ! Component: 1750 - total flux cleaned = -0.00224968 Jy ! Component: 1800 - total flux cleaned = -0.00232569 Jy ! Component: 1850 - total flux cleaned = -0.00240086 Jy ! Component: 1900 - total flux cleaned = -0.00255039 Jy ! Component: 1950 - total flux cleaned = -0.00256883 Jy ! Component: 2000 - total flux cleaned = -0.00271551 Jy ! Component: 2050 - total flux cleaned = -0.00275192 Jy ! Component: 2100 - total flux cleaned = -0.0028421 Jy ! Component: 2150 - total flux cleaned = -0.00291346 Jy ! Component: 2200 - total flux cleaned = -0.00294865 Jy ! Component: 2250 - total flux cleaned = -0.00300115 Jy ! Component: 2300 - total flux cleaned = -0.00301899 Jy ! Component: 2350 - total flux cleaned = -0.00307088 Jy ! Component: 2400 - total flux cleaned = -0.00313931 Jy ! Component: 2450 - total flux cleaned = -0.00312226 Jy ! Component: 2500 - total flux cleaned = -0.003173 Jy ! Component: 2550 - total flux cleaned = -0.00317298 Jy ! Component: 2600 - total flux cleaned = -0.00328894 Jy ! Component: 2650 - total flux cleaned = -0.00330529 Jy ! Component: 2700 - total flux cleaned = -0.00333792 Jy ! Component: 2750 - total flux cleaned = -0.00333798 Jy ! Component: 2800 - total flux cleaned = -0.0033702 Jy ! Component: 2850 - total flux cleaned = -0.00351376 Jy ! Component: 2900 - total flux cleaned = -0.00346645 Jy ! Component: 2950 - total flux cleaned = -0.00352937 Jy ! Component: 3000 - total flux cleaned = -0.00356055 Jy ! Component: 3050 - total flux cleaned = -0.0035606 Jy ! Component: 3100 - total flux cleaned = -0.00368346 Jy ! Component: 3150 - total flux cleaned = -0.00366809 Jy ! Component: 3200 - total flux cleaned = -0.00371351 Jy ! Component: 3250 - total flux cleaned = -0.00375863 Jy ! Component: 3300 - total flux cleaned = -0.00383328 Jy ! Component: 3350 - total flux cleaned = -0.00387771 Jy ! Component: 3400 - total flux cleaned = -0.00389221 Jy ! Component: 3450 - total flux cleaned = -0.00393599 Jy ! Component: 3500 - total flux cleaned = -0.00397965 Jy ! Component: 3550 - total flux cleaned = -0.00402288 Jy ! Component: 3600 - total flux cleaned = -0.0040372 Jy ! Component: 3650 - total flux cleaned = -0.00406553 Jy ! Component: 3700 - total flux cleaned = -0.00412229 Jy ! Component: 3750 - total flux cleaned = -0.00413622 Jy ! Component: 3800 - total flux cleaned = -0.0042902 Jy ! Component: 3850 - total flux cleaned = -0.00430402 Jy ! Component: 3900 - total flux cleaned = -0.00433159 Jy ! Component: 3950 - total flux cleaned = -0.00441408 Jy ! Component: 4000 - total flux cleaned = -0.00450952 Jy ! Component: 4050 - total flux cleaned = -0.00452307 Jy ! Total flux subtracted in 4096 components = -0.00457717 Jy ! Clean residual min=-0.000831 max=0.000888 Jy/beam ! Clean residual mean=-0.000006 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0605347 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 339 components and 0.0605348 Jy ![Exited script file: muppet] wmap "J1429+6316_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.307 at 25.28 degrees (North through East) ! Clean map min=-0.001412 max=0.058259 Jy/beam ! Writing clean map to FITS file: J1429+6316_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0582589 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024308 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25172 1.25172 2.50344 5.00689 10.0138 20.0276 40.0551 80.1102 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.307 at 25.28 degrees (North through East) ! Clean map min=-0.001412 max=0.058259 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1429+6316_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:51:05 2019