! Started logfile: J1428-1553_S_2017_10_09_pus_uvs.log on Sun May 12 13:14:31 2019 obs J1428-1553_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1428-1553_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.672797 visibilities/baseline/integration-bin. ! Found source: J1428-1553 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1428-1553_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 819 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949672Jy sigma=0.006894 ! Fit after self-cal, rms=0.927723Jy sigma=0.006750 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=14.24 mas, bpa=-16.45 degrees ! Estimated noise=1757.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575932 Jy ! Component: 100 - total flux cleaned = 0.0709189 Jy ! Total flux subtracted in 100 components = 0.0709189 Jy ! Clean residual min=-0.005073 max=0.006595 Jy/beam ! Clean residual mean=-0.000042 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.0709189 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0709189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095971Jy sigma=0.000641 ! Fit after self-cal, rms=0.095795Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=20.1 mas, bpa=-15.36 degrees ! Estimated noise=1013.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689427 Jy ! Component: 100 - total flux cleaned = 0.01016 Jy ! Component: 150 - total flux cleaned = 0.0120403 Jy ! Component: 200 - total flux cleaned = 0.0132621 Jy ! Total flux subtracted in 200 components = 0.0132621 Jy ! Clean residual min=-0.002651 max=0.003444 Jy/beam ! Clean residual mean=-0.000012 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0841809 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 45 components and 0.0841809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095251Jy sigma=0.000637 ! Fit after self-cal, rms=0.095272Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.91 HN 1.01 KP 1.05 ! LA 1.08 MK 1.07 NL 0.92 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.04 KP 1.02 ! LA 0.98 MK 0.99 NL 1.05 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.99 HN 0.96 KP 0.89 ! LA 0.77 MK 1.08 NL 1.20 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.84 KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.095272Jy sigma=0.000637 ! Fit after self-cal, rms=0.094455Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=20.49 mas, bpa=-15.23 degrees ! Estimated noise=1031.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233766 Jy ! Component: 100 - total flux cleaned = 0.000234117 Jy ! Component: 150 - total flux cleaned = 0.000234506 Jy ! Component: 200 - total flux cleaned = 0.000234999 Jy ! Total flux subtracted in 200 components = 0.000234999 Jy ! Clean residual min=-0.002763 max=0.003069 Jy/beam ! Clean residual mean=-0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0844159 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0844159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094430Jy sigma=0.000637 ! Fit after self-cal, rms=0.094406Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094406Jy sigma=0.000636 ! Fit after self-cal, rms=0.094103Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=20.61 mas, bpa=-15.36 degrees ! Estimated noise=1030.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021967 Jy ! Component: 100 - total flux cleaned = 0.000244706 Jy ! Component: 150 - total flux cleaned = 0.000287613 Jy ! Component: 200 - total flux cleaned = 0.000267727 Jy ! Total flux subtracted in 200 components = 0.000267727 Jy ! Clean residual min=-0.002811 max=0.002637 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0846837 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.0846836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094088Jy sigma=0.000635 ! Fit after self-cal, rms=0.094126Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24324e-05 Jy ! Component: 100 - total flux cleaned = 1.29912e-05 Jy ! Component: 150 - total flux cleaned = 3.06465e-05 Jy ! Component: 200 - total flux cleaned = 3.07762e-05 Jy ! Total flux subtracted in 200 components = 3.07762e-05 Jy ! Clean residual min=-0.002811 max=0.002679 Jy/beam ! Clean residual mean=-0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0847144 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.0847144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094117Jy sigma=0.000635 ! Fit after self-cal, rms=0.094119Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094119Jy sigma=0.000635 ! Fit after self-cal, rms=0.094554Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=20.76 mas, bpa=-15.35 degrees ! Estimated noise=1030.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.03176e-05 Jy ! Component: 100 - total flux cleaned = 0.000113247 Jy ! Component: 150 - total flux cleaned = 0.000113717 Jy ! Component: 200 - total flux cleaned = 8.06186e-05 Jy ! Total flux subtracted in 200 components = 8.06186e-05 Jy ! Clean residual min=-0.002783 max=0.002598 Jy/beam ! Clean residual mean=-0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.084795 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.084795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094543Jy sigma=0.000635 ! Fit after self-cal, rms=0.094559Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.46783e-05 Jy ! Component: 100 - total flux cleaned = -3.08682e-05 Jy ! Component: 150 - total flux cleaned = -2.9939e-05 Jy ! Component: 200 - total flux cleaned = -2.9881e-05 Jy ! Total flux subtracted in 200 components = -2.9881e-05 Jy ! Clean residual min=-0.002778 max=0.002615 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0847651 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.0847652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094552Jy sigma=0.000635 ! Fit after self-cal, rms=0.094553Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094553Jy sigma=0.000635 ! Fit after self-cal, rms=0.094836Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.89 mas, bmaj=24.51 mas, bpa=-12.02 degrees ! Estimated noise=1202.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.26235e-05 Jy ! Component: 100 - total flux cleaned = -2.94045e-05 Jy ! Component: 150 - total flux cleaned = -7.39181e-05 Jy ! Component: 200 - total flux cleaned = -9.89585e-05 Jy ! Total flux subtracted in 200 components = -9.89585e-05 Jy ! Clean residual min=-0.002995 max=0.002872 Jy/beam ! Clean residual mean=-0.000003 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0846662 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 85 components and 0.0846662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094835Jy sigma=0.000635 ! Fit after self-cal, rms=0.094837Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.16916e-05 Jy ! Component: 100 - total flux cleaned = 2.85766e-05 Jy ! Component: 150 - total flux cleaned = 5.78086e-06 Jy ! Component: 200 - total flux cleaned = -1.45932e-05 Jy ! Total flux subtracted in 200 components = -1.45932e-05 Jy ! Clean residual min=-0.002978 max=0.002851 Jy/beam ! Clean residual mean=-0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0846516 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 87 components and 0.0846516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094839Jy sigma=0.000635 ! Fit after self-cal, rms=0.094834Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=20.88 mas, bpa=-15.34 degrees ! Estimated noise=1030.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 20.88 at -15.34 degrees (North through East) ! Clean map min=-0.0025926 max=0.075337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=14.98 mas, bpa=-16.25 degrees ! Estimated noise=1819.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579913 Jy ! Component: 100 - total flux cleaned = 0.0721515 Jy ! Component: 150 - total flux cleaned = 0.0784638 Jy ! Component: 200 - total flux cleaned = 0.0814723 Jy ! Total flux subtracted in 200 components = 0.0814723 Jy ! Clean residual min=-0.004368 max=0.004351 Jy/beam ! Clean residual mean=-0.000010 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.0814723 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0814723 Jy ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=20.88 mas, bpa=-15.34 degrees ! Estimated noise=1030.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251507 Jy ! Component: 100 - total flux cleaned = 0.00301975 Jy ! Component: 150 - total flux cleaned = 0.00309691 Jy ! Component: 200 - total flux cleaned = 0.00313026 Jy ! Total flux subtracted in 200 components = 0.00313026 Jy ! Clean residual min=-0.002822 max=0.002558 Jy/beam ! Clean residual mean=-0.000002 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0846026 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.0846026 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.89 mas, bmaj=24.51 mas, bpa=-12.02 degrees ! Estimated noise=1202.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.80185e-05 Jy ! Component: 100 - total flux cleaned = 9.92309e-05 Jy ! Component: 150 - total flux cleaned = 0.000100129 Jy ! Component: 200 - total flux cleaned = 0.000100589 Jy ! Total flux subtracted in 200 components = 0.000100589 Jy ! Clean residual min=-0.002987 max=0.002846 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0847032 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44881e-05 Jy ! Component: 100 - total flux cleaned = -3.6325e-05 Jy ! Component: 150 - total flux cleaned = -5.99447e-05 Jy ! Component: 200 - total flux cleaned = -7.15455e-05 Jy ! Total flux subtracted in 200 components = -7.15455e-05 Jy ! Clean residual min=-0.002961 max=0.002852 Jy/beam ! Clean residual mean=-0.000003 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0846316 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0846316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=20.88 mas, bpa=-15.34 degrees ! Estimated noise=1030.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.05898e-06 Jy ! Component: 100 - total flux cleaned = 3.46867e-05 Jy ! Component: 150 - total flux cleaned = 5.91542e-05 Jy ! Component: 200 - total flux cleaned = 5.9827e-05 Jy ! Total flux subtracted in 200 components = 5.9827e-05 Jy ! Clean residual min=-0.002763 max=0.002519 Jy/beam ! Clean residual mean=-0.000001 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0846914 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0846914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094843Jy sigma=0.000635 ! Fit after self-cal, rms=0.094843Jy sigma=0.000635 wmodel J1428-1553_S_2017_10_09_pus_map.mod ! Writing 58 model components to file: J1428-1553_S_2017_10_09_pus_map.mod wobs J1428-1553_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1428-1553_S_2017_10_09_pus_uvs.fits wwins J1428-1553_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1428-1553_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.83106e-05 Jy ! Component: 100 - total flux cleaned = 0.000251681 Jy ! Component: 150 - total flux cleaned = 0.000469297 Jy ! Component: 200 - total flux cleaned = 0.000706508 Jy ! Component: 250 - total flux cleaned = 0.000897186 Jy ! Component: 300 - total flux cleaned = 0.00104808 Jy ! Component: 350 - total flux cleaned = 0.00113373 Jy ! Component: 400 - total flux cleaned = 0.0012969 Jy ! Component: 450 - total flux cleaned = 0.00153186 Jy ! Component: 500 - total flux cleaned = 0.00173173 Jy ! Component: 550 - total flux cleaned = 0.00194822 Jy ! Component: 600 - total flux cleaned = 0.00213421 Jy ! Component: 650 - total flux cleaned = 0.00235955 Jy ! Component: 700 - total flux cleaned = 0.00260062 Jy ! Component: 750 - total flux cleaned = 0.00279236 Jy ! Component: 800 - total flux cleaned = 0.00297879 Jy ! Component: 850 - total flux cleaned = 0.00316054 Jy ! Component: 900 - total flux cleaned = 0.00333789 Jy ! Component: 950 - total flux cleaned = 0.00354965 Jy ! Component: 1000 - total flux cleaned = 0.00375696 Jy ! Component: 1050 - total flux cleaned = 0.00399694 Jy ! Component: 1100 - total flux cleaned = 0.00419623 Jy ! Component: 1150 - total flux cleaned = 0.00442707 Jy ! Component: 1200 - total flux cleaned = 0.00461852 Jy ! Component: 1250 - total flux cleaned = 0.00478954 Jy ! Component: 1300 - total flux cleaned = 0.00495748 Jy ! Component: 1350 - total flux cleaned = 0.00507263 Jy ! Component: 1400 - total flux cleaned = 0.00521879 Jy ! Component: 1450 - total flux cleaned = 0.00536208 Jy ! Component: 1500 - total flux cleaned = 0.00553403 Jy ! Component: 1550 - total flux cleaned = 0.00561106 Jy ! Component: 1600 - total flux cleaned = 0.00574731 Jy ! Component: 1650 - total flux cleaned = 0.00580726 Jy ! Component: 1700 - total flux cleaned = 0.00586629 Jy ! Component: 1750 - total flux cleaned = 0.00592445 Jy ! Component: 1800 - total flux cleaned = 0.00601003 Jy ! Component: 1850 - total flux cleaned = 0.00606629 Jy ! Component: 1900 - total flux cleaned = 0.006108 Jy ! Component: 1950 - total flux cleaned = 0.0062036 Jy ! Component: 2000 - total flux cleaned = 0.00624409 Jy ! Component: 2050 - total flux cleaned = 0.00629749 Jy ! Component: 2100 - total flux cleaned = 0.00638972 Jy ! Component: 2150 - total flux cleaned = 0.00649367 Jy ! Component: 2200 - total flux cleaned = 0.00655752 Jy ! Component: 2250 - total flux cleaned = 0.00658301 Jy ! Component: 2300 - total flux cleaned = 0.00665847 Jy ! Component: 2350 - total flux cleaned = 0.0067204 Jy ! Component: 2400 - total flux cleaned = 0.00675742 Jy ! Component: 2450 - total flux cleaned = 0.00681802 Jy ! Component: 2500 - total flux cleaned = 0.00687797 Jy ! Component: 2550 - total flux cleaned = 0.00693717 Jy ! Component: 2600 - total flux cleaned = 0.00694891 Jy ! Component: 2650 - total flux cleaned = 0.006984 Jy ! Component: 2700 - total flux cleaned = 0.00704149 Jy ! Component: 2750 - total flux cleaned = 0.00708695 Jy ! Component: 2800 - total flux cleaned = 0.00713189 Jy ! Component: 2850 - total flux cleaned = 0.00718758 Jy ! Component: 2900 - total flux cleaned = 0.00724269 Jy ! Component: 2950 - total flux cleaned = 0.00729736 Jy ! Component: 3000 - total flux cleaned = 0.00730828 Jy ! Component: 3050 - total flux cleaned = 0.00736193 Jy ! Component: 3100 - total flux cleaned = 0.00740432 Jy ! Component: 3150 - total flux cleaned = 0.00739377 Jy ! Component: 3200 - total flux cleaned = 0.00743568 Jy ! Component: 3250 - total flux cleaned = 0.00745643 Jy ! Component: 3300 - total flux cleaned = 0.0074874 Jy ! Component: 3350 - total flux cleaned = 0.00751805 Jy ! Component: 3400 - total flux cleaned = 0.00750794 Jy ! Component: 3450 - total flux cleaned = 0.00756821 Jy ! Component: 3500 - total flux cleaned = 0.00756806 Jy ! Component: 3550 - total flux cleaned = 0.00756815 Jy ! Component: 3600 - total flux cleaned = 0.00760757 Jy ! Component: 3650 - total flux cleaned = 0.00765629 Jy ! Component: 3700 - total flux cleaned = 0.00764658 Jy ! Component: 3750 - total flux cleaned = 0.00768509 Jy ! Component: 3800 - total flux cleaned = 0.00769466 Jy ! Component: 3850 - total flux cleaned = 0.00776089 Jy ! Component: 3900 - total flux cleaned = 0.00775146 Jy ! Component: 3950 - total flux cleaned = 0.00777956 Jy ! Component: 4000 - total flux cleaned = 0.00780742 Jy ! Component: 4050 - total flux cleaned = 0.00784425 Jy ! Total flux subtracted in 4096 components = 0.00786254 Jy ! Clean residual min=-0.000686 max=0.000473 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.092554 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 305 components and 0.0925539 Jy ![Exited script file: muppet] wmap "J1428-1553_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 20.88 at -15.34 degrees (North through East) ! Clean map min=-0.0018132 max=0.075046 Jy/beam ! Writing clean map to FITS file: J1428-1553_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0750463 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162912 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.651246 0.651246 1.30249 2.60499 5.20997 10.4199 20.8399 41.6798 83.3595 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 20.88 at -15.34 degrees (North through East) ! Clean map min=-0.0018132 max=0.075046 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1428-1553_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:14:36 2019