! Started logfile: J1425+1424_S_2017_08_12_pus_uvs.log on Fri May 10 15:01:02 2019 obs J1425+1424_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1425+1424_S_2017_08_12_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.164815 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1425+1424 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1425+1424_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.724168Jy sigma=0.007016 ! Fit after self-cal, rms=0.701679Jy sigma=0.007182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=7.814 mas, bpa=-7.549 degrees ! Estimated noise=3215.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229657 Jy ! Component: 100 - total flux cleaned = 0.288467 Jy ! Total flux subtracted in 100 components = 0.288467 Jy ! Clean residual min=-0.014893 max=0.025506 Jy/beam ! Clean residual mean=0.000203 rms=0.005231 Jy/beam ! Combined flux in latest and established models = 0.288467 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.288467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084338Jy sigma=0.000848 ! Fit after self-cal, rms=0.084168Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=8.279 mas, bpa=-6.22 degrees ! Estimated noise=2561.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337636 Jy ! Component: 100 - total flux cleaned = 0.0497192 Jy ! Component: 150 - total flux cleaned = 0.0587852 Jy ! Component: 200 - total flux cleaned = 0.0644028 Jy ! Total flux subtracted in 200 components = 0.0644028 Jy ! Clean residual min=-0.009653 max=0.017769 Jy/beam ! Clean residual mean=0.000086 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 0.35287 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.35287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070527Jy sigma=0.000708 ! Fit after self-cal, rms=0.070306Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.91 KP 1.04 ! LA 0.98 MK 1.01 NL 0.97 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 0.98 ! LA 0.92 MK 0.96 NL 1.21 OV 1.01 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00 ! LA 0.93 MK 1.01 NL 1.21 OV 0.95 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.070306Jy sigma=0.000706 ! Fit after self-cal, rms=0.064616Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=8.329 mas, bpa=-5.526 degrees ! Estimated noise=2560.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26181e-05 Jy ! Component: 100 - total flux cleaned = -0.000792141 Jy ! Component: 150 - total flux cleaned = -0.00128415 Jy ! Component: 200 - total flux cleaned = -0.00162848 Jy ! Total flux subtracted in 200 components = -0.00162848 Jy ! Clean residual min=-0.005895 max=0.008312 Jy/beam ! Clean residual mean=0.000023 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.351241 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.351241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064299Jy sigma=0.000643 ! Fit after self-cal, rms=0.064239Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064239Jy sigma=0.000642 ! Fit after self-cal, rms=0.064165Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=8.338 mas, bpa=-5.58 degrees ! Estimated noise=2556.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311063 Jy ! Component: 100 - total flux cleaned = -0.000165349 Jy ! Component: 150 - total flux cleaned = -0.000432657 Jy ! Component: 200 - total flux cleaned = -0.000616874 Jy ! Total flux subtracted in 200 components = -0.000616874 Jy ! Clean residual min=-0.005360 max=0.007567 Jy/beam ! Clean residual mean=0.000021 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.350625 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.350625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064013Jy sigma=0.000640 ! Fit after self-cal, rms=0.063974Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626945 Jy ! Component: 100 - total flux cleaned = 0.00928316 Jy ! Component: 150 - total flux cleaned = 0.0106728 Jy ! Component: 200 - total flux cleaned = 0.011054 Jy ! Total flux subtracted in 200 components = 0.011054 Jy ! Clean residual min=-0.004530 max=0.005070 Jy/beam ! Clean residual mean=0.000003 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.361679 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.361679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063348Jy sigma=0.000633 ! Fit after self-cal, rms=0.063318Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063318Jy sigma=0.000633 ! Fit after self-cal, rms=0.063171Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=8.346 mas, bpa=-5.597 degrees ! Estimated noise=2550.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111182 Jy ! Component: 100 - total flux cleaned = 0.00141085 Jy ! Component: 150 - total flux cleaned = 0.00151709 Jy ! Component: 200 - total flux cleaned = 0.00156545 Jy ! Total flux subtracted in 200 components = 0.00156545 Jy ! Clean residual min=-0.004287 max=0.004956 Jy/beam ! Clean residual mean=-0.000003 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.363244 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.363244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063070Jy sigma=0.000632 ! Fit after self-cal, rms=0.063068Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (106.5, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305682 Jy ! Component: 100 - total flux cleaned = 0.00390042 Jy ! Component: 150 - total flux cleaned = 0.00461303 Jy ! Component: 200 - total flux cleaned = 0.00529575 Jy ! Total flux subtracted in 200 components = 0.00529575 Jy ! Clean residual min=-0.004024 max=0.003927 Jy/beam ! Clean residual mean=0.000005 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.36854 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 87 components and 0.36854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062744Jy sigma=0.000628 ! Fit after self-cal, rms=0.062730Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062730Jy sigma=0.000628 ! Fit after self-cal, rms=0.062702Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.705 mas, bmaj=14.35 mas, bpa=-12.24 degrees ! Estimated noise=3442.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606141 Jy ! Component: 100 - total flux cleaned = 0.00160582 Jy ! Component: 150 - total flux cleaned = 0.00244053 Jy ! Component: 200 - total flux cleaned = 0.00277846 Jy ! Total flux subtracted in 200 components = 0.00277846 Jy ! Clean residual min=-0.003186 max=0.003470 Jy/beam ! Clean residual mean=0.000008 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.371318 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.371318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062677Jy sigma=0.000627 ! Fit after self-cal, rms=0.062673Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340059 Jy ! Component: 100 - total flux cleaned = 0.000343891 Jy ! Component: 150 - total flux cleaned = 0.000380127 Jy ! Component: 200 - total flux cleaned = 0.000483589 Jy ! Total flux subtracted in 200 components = 0.000483589 Jy ! Clean residual min=-0.002974 max=0.003238 Jy/beam ! Clean residual mean=0.000007 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.371802 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.371802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062657Jy sigma=0.000627 ! Fit after self-cal, rms=0.062657Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=8.352 mas, bpa=-5.597 degrees ! Estimated noise=2548.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.721 x 8.352 at -5.597 degrees (North through East) ! Clean map min=-0.0035174 max=0.29814 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=7.83 mas, bpa=-6.393 degrees ! Estimated noise=2952.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225531 Jy ! Component: 100 - total flux cleaned = 0.285944 Jy ! Component: 150 - total flux cleaned = 0.314328 Jy ! Component: 200 - total flux cleaned = 0.328786 Jy ! Total flux subtracted in 200 components = 0.328786 Jy ! Clean residual min=-0.007999 max=0.008594 Jy/beam ! Clean residual mean=0.000054 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.328786 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.328786 Jy ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=8.352 mas, bpa=-5.597 degrees ! Estimated noise=2548.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010233 Jy ! Component: 100 - total flux cleaned = 0.0157333 Jy ! Component: 150 - total flux cleaned = 0.0202124 Jy ! Component: 200 - total flux cleaned = 0.0238725 Jy ! Total flux subtracted in 200 components = 0.0238725 Jy ! Clean residual min=-0.005362 max=0.004451 Jy/beam ! Clean residual mean=0.000021 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.352658 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 46 components and 0.352658 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.705 mas, bmaj=14.35 mas, bpa=-12.24 degrees ! Estimated noise=3442.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529881 Jy ! Component: 100 - total flux cleaned = 0.00858744 Jy ! Component: 150 - total flux cleaned = 0.0111013 Jy ! Component: 200 - total flux cleaned = 0.0130853 Jy ! Total flux subtracted in 200 components = 0.0130853 Jy ! Clean residual min=-0.003650 max=0.003667 Jy/beam ! Clean residual mean=0.000024 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.365743 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137234 Jy ! Component: 100 - total flux cleaned = 0.00220796 Jy ! Component: 150 - total flux cleaned = 0.00289346 Jy ! Component: 200 - total flux cleaned = 0.00320201 Jy ! Total flux subtracted in 200 components = 0.00320201 Jy ! Clean residual min=-0.003136 max=0.003535 Jy/beam ! Clean residual mean=0.000019 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.368945 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 93 components and 0.368945 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=8.352 mas, bpa=-5.597 degrees ! Estimated noise=2548.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104331 Jy ! Component: 100 - total flux cleaned = 0.00155559 Jy ! Component: 150 - total flux cleaned = 0.00185769 Jy ! Component: 200 - total flux cleaned = 0.00213354 Jy ! Total flux subtracted in 200 components = 0.00213354 Jy ! Clean residual min=-0.003992 max=0.004071 Jy/beam ! Clean residual mean=0.000005 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.371079 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.371079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062895Jy sigma=0.000629 ! Fit after self-cal, rms=0.062873Jy sigma=0.000629 wmodel J1425+1424_S_2017_08_12_pus_map.mod ! Writing 112 model components to file: J1425+1424_S_2017_08_12_pus_map.mod wobs J1425+1424_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1425+1424_S_2017_08_12_pus_uvs.fits wwins J1425+1424_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J1425+1424_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568568 Jy ! Component: 100 - total flux cleaned = -0.000825804 Jy ! Component: 150 - total flux cleaned = -0.00105287 Jy ! Component: 200 - total flux cleaned = -0.000898338 Jy ! Component: 250 - total flux cleaned = -0.000653296 Jy ! Component: 300 - total flux cleaned = -0.000235318 Jy ! Component: 350 - total flux cleaned = 0.000166958 Jy ! Component: 400 - total flux cleaned = 0.000423843 Jy ! Component: 450 - total flux cleaned = 0.000630789 Jy ! Component: 500 - total flux cleaned = 0.00075117 Jy ! Component: 550 - total flux cleaned = 0.00082809 Jy ! Component: 600 - total flux cleaned = 0.000791131 Jy ! Component: 650 - total flux cleaned = 0.000865707 Jy ! Component: 700 - total flux cleaned = 0.000866902 Jy ! Component: 750 - total flux cleaned = 0.000797389 Jy ! Component: 800 - total flux cleaned = 0.000627253 Jy ! Component: 850 - total flux cleaned = 0.000694515 Jy ! Component: 900 - total flux cleaned = 0.000563043 Jy ! Component: 950 - total flux cleaned = 0.000433913 Jy ! Component: 1000 - total flux cleaned = 0.000213248 Jy ! Component: 1050 - total flux cleaned = 5.89774e-05 Jy ! Component: 1100 - total flux cleaned = -0.000154185 Jy ! Component: 1150 - total flux cleaned = -0.000274511 Jy ! Component: 1200 - total flux cleaned = -0.000569918 Jy ! Component: 1250 - total flux cleaned = -0.000773493 Jy ! Component: 1300 - total flux cleaned = -0.00111749 Jy ! Component: 1350 - total flux cleaned = -0.00142786 Jy ! Component: 1400 - total flux cleaned = -0.00176205 Jy ! Component: 1450 - total flux cleaned = -0.00203639 Jy ! Component: 1500 - total flux cleaned = -0.00233443 Jy ! Component: 1550 - total flux cleaned = -0.00254828 Jy ! Component: 1600 - total flux cleaned = -0.0028385 Jy ! Component: 1650 - total flux cleaned = -0.00307296 Jy ! Component: 1700 - total flux cleaned = -0.00338209 Jy ! Component: 1750 - total flux cleaned = -0.0036103 Jy ! Component: 1800 - total flux cleaned = -0.00383599 Jy ! Component: 1850 - total flux cleaned = -0.00403469 Jy ! Component: 1900 - total flux cleaned = -0.00428047 Jy ! Component: 1950 - total flux cleaned = -0.00447479 Jy ! Component: 2000 - total flux cleaned = -0.00466715 Jy ! Component: 2050 - total flux cleaned = -0.00483422 Jy ! Component: 2100 - total flux cleaned = -0.00492889 Jy ! Component: 2150 - total flux cleaned = -0.00511668 Jy ! Component: 2200 - total flux cleaned = -0.00528019 Jy ! Component: 2250 - total flux cleaned = -0.00551214 Jy ! Component: 2300 - total flux cleaned = -0.00567348 Jy ! Component: 2350 - total flux cleaned = -0.00585703 Jy ! Component: 2400 - total flux cleaned = -0.00601689 Jy ! Component: 2450 - total flux cleaned = -0.00606226 Jy ! Component: 2500 - total flux cleaned = -0.00626567 Jy ! Component: 2550 - total flux cleaned = -0.00628814 Jy ! Component: 2600 - total flux cleaned = -0.00637776 Jy ! Component: 2650 - total flux cleaned = -0.00642273 Jy ! Component: 2700 - total flux cleaned = -0.00649001 Jy ! Component: 2750 - total flux cleaned = -0.00657978 Jy ! Component: 2800 - total flux cleaned = -0.00664733 Jy ! Component: 2850 - total flux cleaned = -0.00671486 Jy ! Component: 2900 - total flux cleaned = -0.00678269 Jy ! Component: 2950 - total flux cleaned = -0.00682818 Jy ! Component: 3000 - total flux cleaned = -0.00687367 Jy ! Component: 3050 - total flux cleaned = -0.0068965 Jy ! Component: 3100 - total flux cleaned = -0.00691966 Jy ! Component: 3150 - total flux cleaned = -0.00694289 Jy ! Component: 3200 - total flux cleaned = -0.00696633 Jy ! Component: 3250 - total flux cleaned = -0.00703688 Jy ! Component: 3300 - total flux cleaned = -0.00706051 Jy ! Component: 3350 - total flux cleaned = -0.00713264 Jy ! Component: 3400 - total flux cleaned = -0.00718121 Jy ! Component: 3450 - total flux cleaned = -0.0072549 Jy ! Component: 3500 - total flux cleaned = -0.00732928 Jy ! Component: 3550 - total flux cleaned = -0.00740443 Jy ! Component: 3600 - total flux cleaned = -0.00748036 Jy ! Component: 3650 - total flux cleaned = -0.00753167 Jy ! Component: 3700 - total flux cleaned = -0.00758371 Jy ! Component: 3750 - total flux cleaned = -0.00768883 Jy ! Component: 3800 - total flux cleaned = -0.00776925 Jy ! Component: 3850 - total flux cleaned = -0.00785035 Jy ! Component: 3900 - total flux cleaned = -0.00793248 Jy ! Component: 3950 - total flux cleaned = -0.00801585 Jy ! Component: 4000 - total flux cleaned = -0.00812846 Jy ! Component: 4050 - total flux cleaned = -0.00824245 Jy ! Total flux subtracted in 4096 components = -0.00838726 Jy ! Clean residual min=-0.001505 max=0.001575 Jy/beam ! Clean residual mean=0.000007 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.362692 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 342 components and 0.362692 Jy ![Exited script file: muppet] wmap "J1425+1424_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.721 x 8.352 at -5.597 degrees (North through East) ! Clean map min=-0.0030653 max=0.29589 Jy/beam ! Writing clean map to FITS file: J1425+1424_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.295892 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000489316 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49611 0.49611 0.99222 1.98444 3.96888 7.93776 15.8755 31.751 63.5021 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.295 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.721 x 8.352 at -5.597 degrees (North through East) ! Clean map min=-0.0030653 max=0.29589 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1425+1424_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:01:06 2019