! Started logfile: J1425+1424_S_2017_01_21_pus_uvs.log on Sun May 5 15:56:04 2019 obs J1425+1424_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1425+1424_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J1425+1424 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1425+1424_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.692187Jy sigma=0.005456 ! Fit after self-cal, rms=0.687396Jy sigma=0.005425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=6.23 mas, bpa=0.1438 degrees ! Estimated noise=2955.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253376 Jy ! Component: 100 - total flux cleaned = 0.313717 Jy ! Total flux subtracted in 100 components = 0.313717 Jy ! Clean residual min=-0.017268 max=0.024001 Jy/beam ! Clean residual mean=0.000065 rms=0.004386 Jy/beam ! Combined flux in latest and established models = 0.313717 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.313717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115762Jy sigma=0.000798 ! Fit after self-cal, rms=0.115680Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=6.792 mas, bpa=3.137 degrees ! Estimated noise=2452.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274275 Jy ! Component: 100 - total flux cleaned = 0.039325 Jy ! Component: 150 - total flux cleaned = 0.0413836 Jy ! Component: 200 - total flux cleaned = 0.0418266 Jy ! Total flux subtracted in 200 components = 0.0418266 Jy ! Clean residual min=-0.011205 max=0.016775 Jy/beam ! Clean residual mean=0.000082 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.355544 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.355544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111454Jy sigma=0.000725 ! Fit after self-cal, rms=0.111342Jy sigma=0.000723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 LA 1.02 ! MK 0.95 NL 0.98 OV 1.06 PT 0.96 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.01 LA 0.95 ! MK 1.00 NL 1.00 OV 1.16 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.93 LA 1.01 ! MK 1.01 NL 1.00 OV 1.09 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.93 LA 0.93 ! MK 1.05 NL 1.00* OV 1.12 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.111342Jy sigma=0.000723 ! Fit after self-cal, rms=0.114145Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=6.789 mas, bpa=3.107 degrees ! Estimated noise=2417.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577881 Jy ! Component: 100 - total flux cleaned = -0.000280429 Jy ! Component: 150 - total flux cleaned = -0.000474086 Jy ! Component: 200 - total flux cleaned = -0.000474362 Jy ! Total flux subtracted in 200 components = -0.000474362 Jy ! Clean residual min=-0.010287 max=0.009493 Jy/beam ! Clean residual mean=0.000039 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.35507 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.35507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113757Jy sigma=0.000691 ! Fit after self-cal, rms=0.113921Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113921Jy sigma=0.000691 ! Fit after self-cal, rms=0.123439Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=6.791 mas, bpa=2.922 degrees ! Estimated noise=2420.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115439 Jy ! Component: 100 - total flux cleaned = 0.0014244 Jy ! Component: 150 - total flux cleaned = 0.0016392 Jy ! Component: 200 - total flux cleaned = 0.00172954 Jy ! Total flux subtracted in 200 components = 0.00172954 Jy ! Clean residual min=-0.006670 max=0.005856 Jy/beam ! Clean residual mean=0.000029 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.356799 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.356799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123304Jy sigma=0.000654 ! Fit after self-cal, rms=0.123437Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268177 Jy ! Component: 100 - total flux cleaned = 0.000178061 Jy ! Component: 150 - total flux cleaned = 0.000178617 Jy ! Component: 200 - total flux cleaned = 0.000211985 Jy ! Total flux subtracted in 200 components = 0.000211985 Jy ! Clean residual min=-0.006598 max=0.005801 Jy/beam ! Clean residual mean=0.000029 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.357011 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.357011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123392Jy sigma=0.000654 ! Fit after self-cal, rms=0.123397Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123397Jy sigma=0.000654 ! Fit after self-cal, rms=0.124597Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=6.786 mas, bpa=2.794 degrees ! Estimated noise=2418.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071581 Jy ! Component: 100 - total flux cleaned = 0.000848019 Jy ! Component: 150 - total flux cleaned = 0.00095807 Jy ! Component: 200 - total flux cleaned = 0.000989712 Jy ! Total flux subtracted in 200 components = 0.000989712 Jy ! Clean residual min=-0.006604 max=0.005741 Jy/beam ! Clean residual mean=0.000029 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.358001 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.358001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124525Jy sigma=0.000653 ! Fit after self-cal, rms=0.124539Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316553 Jy ! Component: 100 - total flux cleaned = 0.000218771 Jy ! Component: 150 - total flux cleaned = 0.000217556 Jy ! Component: 200 - total flux cleaned = 0.000216253 Jy ! Total flux subtracted in 200 components = 0.000216253 Jy ! Clean residual min=-0.006559 max=0.005716 Jy/beam ! Clean residual mean=0.000029 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.358217 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.358217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124512Jy sigma=0.000653 ! Fit after self-cal, rms=0.124519Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124519Jy sigma=0.000653 ! Fit after self-cal, rms=0.124718Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.43 mas, bmaj=10.38 mas, bpa=0.4128 degrees ! Estimated noise=3331.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274799 Jy ! Component: 100 - total flux cleaned = 0.00282189 Jy ! Component: 150 - total flux cleaned = 0.00271382 Jy ! Component: 200 - total flux cleaned = 0.00266773 Jy ! Total flux subtracted in 200 components = 0.00266773 Jy ! Clean residual min=-0.008748 max=0.008833 Jy/beam ! Clean residual mean=0.000065 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.360885 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.360885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124643Jy sigma=0.000654 ! Fit after self-cal, rms=0.124644Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.90676e-05 Jy ! Component: 100 - total flux cleaned = 5.97708e-05 Jy ! Component: 150 - total flux cleaned = 2.60312e-05 Jy ! Component: 200 - total flux cleaned = 2.63083e-05 Jy ! Total flux subtracted in 200 components = 2.63083e-05 Jy ! Clean residual min=-0.008788 max=0.009063 Jy/beam ! Clean residual mean=0.000066 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.360911 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.360911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124626Jy sigma=0.000654 ! Fit after self-cal, rms=0.124630Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=6.783 mas, bpa=2.707 degrees ! Estimated noise=2418.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 6.783 at 2.707 degrees (North through East) ! Clean map min=-0.0066623 max=0.3258 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.252 mas, bpa=-0.2401 degrees ! Estimated noise=2885.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246747 Jy ! Component: 100 - total flux cleaned = 0.309623 Jy ! Component: 150 - total flux cleaned = 0.336754 Jy ! Component: 200 - total flux cleaned = 0.346821 Jy ! Total flux subtracted in 200 components = 0.346821 Jy ! Clean residual min=-0.008105 max=0.007217 Jy/beam ! Clean residual mean=0.000018 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.346821 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.346821 Jy ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=6.783 mas, bpa=2.707 degrees ! Estimated noise=2418.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712989 Jy ! Component: 100 - total flux cleaned = 0.00874989 Jy ! Component: 150 - total flux cleaned = 0.00993743 Jy ! Component: 200 - total flux cleaned = 0.0103213 Jy ! Total flux subtracted in 200 components = 0.0103213 Jy ! Clean residual min=-0.006987 max=0.006022 Jy/beam ! Clean residual mean=0.000032 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.357143 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.357143 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.43 mas, bmaj=10.38 mas, bpa=0.4128 degrees ! Estimated noise=3331.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368291 Jy ! Component: 100 - total flux cleaned = 0.00376848 Jy ! Component: 150 - total flux cleaned = 0.00377159 Jy ! Component: 200 - total flux cleaned = 0.00383352 Jy ! Total flux subtracted in 200 components = 0.00383352 Jy ! Clean residual min=-0.008905 max=0.008800 Jy/beam ! Clean residual mean=0.000065 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 0.360976 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90133e-05 Jy ! Component: 100 - total flux cleaned = 4.95393e-05 Jy ! Component: 150 - total flux cleaned = 5.00244e-05 Jy ! Component: 200 - total flux cleaned = 5.12409e-05 Jy ! Total flux subtracted in 200 components = 5.12409e-05 Jy ! Clean residual min=-0.008814 max=0.008987 Jy/beam ! Clean residual mean=0.000065 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 0.361027 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.361027 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=6.783 mas, bpa=2.707 degrees ! Estimated noise=2418.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202846 Jy ! Component: 100 - total flux cleaned = -0.00202584 Jy ! Component: 150 - total flux cleaned = -0.00202464 Jy ! Component: 200 - total flux cleaned = -0.00202608 Jy ! Total flux subtracted in 200 components = -0.00202608 Jy ! Clean residual min=-0.007002 max=0.005672 Jy/beam ! Clean residual mean=0.000029 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.359001 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.359001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124728Jy sigma=0.000654 ! Fit after self-cal, rms=0.124739Jy sigma=0.000654 wmodel J1425+1424_S_2017_01_21_pus_map.mod ! Writing 55 model components to file: J1425+1424_S_2017_01_21_pus_map.mod wobs J1425+1424_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1425+1424_S_2017_01_21_pus_uvs.fits wwins J1425+1424_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1425+1424_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308163 Jy ! Component: 100 - total flux cleaned = -0.00486335 Jy ! Component: 150 - total flux cleaned = -0.00593928 Jy ! Component: 200 - total flux cleaned = -0.00631583 Jy ! Component: 250 - total flux cleaned = -0.00649619 Jy ! Component: 300 - total flux cleaned = -0.00632766 Jy ! Component: 350 - total flux cleaned = -0.00624643 Jy ! Component: 400 - total flux cleaned = -0.00600521 Jy ! Component: 450 - total flux cleaned = -0.00576948 Jy ! Component: 500 - total flux cleaned = -0.00546292 Jy ! Component: 550 - total flux cleaned = -0.00494121 Jy ! Component: 600 - total flux cleaned = -0.00457786 Jy ! Component: 650 - total flux cleaned = -0.00422234 Jy ! Component: 700 - total flux cleaned = -0.00394357 Jy ! Component: 750 - total flux cleaned = -0.00353428 Jy ! Component: 800 - total flux cleaned = -0.0032669 Jy ! Component: 850 - total flux cleaned = -0.00293866 Jy ! Component: 900 - total flux cleaned = -0.00255405 Jy ! Component: 950 - total flux cleaned = -0.00223993 Jy ! Component: 1000 - total flux cleaned = -0.0018707 Jy ! Component: 1050 - total flux cleaned = -0.0015078 Jy ! Component: 1100 - total flux cleaned = -0.00109165 Jy ! Component: 1150 - total flux cleaned = -0.000741402 Jy ! Component: 1200 - total flux cleaned = -0.000225151 Jy ! Component: 1250 - total flux cleaned = 5.61155e-05 Jy ! Component: 1300 - total flux cleaned = 0.000277384 Jy ! Component: 1350 - total flux cleaned = 0.000716135 Jy ! Component: 1400 - total flux cleaned = 0.00104022 Jy ! Component: 1450 - total flux cleaned = 0.00135975 Jy ! Component: 1500 - total flux cleaned = 0.00162258 Jy ! Component: 1550 - total flux cleaned = 0.00214034 Jy ! Component: 1600 - total flux cleaned = 0.00249761 Jy ! Component: 1650 - total flux cleaned = 0.00284944 Jy ! Component: 1700 - total flux cleaned = 0.00314677 Jy ! Component: 1750 - total flux cleaned = 0.00358636 Jy ! Component: 1800 - total flux cleaned = 0.00392339 Jy ! Component: 1850 - total flux cleaned = 0.00416031 Jy ! Component: 1900 - total flux cleaned = 0.00444275 Jy ! Component: 1950 - total flux cleaned = 0.00476803 Jy ! Component: 2000 - total flux cleaned = 0.00508919 Jy ! Component: 2050 - total flux cleaned = 0.0054515 Jy ! Component: 2100 - total flux cleaned = 0.00572003 Jy ! Component: 2150 - total flux cleaned = 0.00598499 Jy ! Component: 2200 - total flux cleaned = 0.00624703 Jy ! Component: 2250 - total flux cleaned = 0.00654956 Jy ! Component: 2300 - total flux cleaned = 0.00697671 Jy ! Component: 2350 - total flux cleaned = 0.00718819 Jy ! Component: 2400 - total flux cleaned = 0.00756459 Jy ! Component: 2450 - total flux cleaned = 0.00772983 Jy ! Component: 2500 - total flux cleaned = 0.0079755 Jy ! Component: 2550 - total flux cleaned = 0.00829952 Jy ! Component: 2600 - total flux cleaned = 0.00854049 Jy ! Component: 2650 - total flux cleaned = 0.00885856 Jy ! Component: 2700 - total flux cleaned = 0.00909519 Jy ! Component: 2750 - total flux cleaned = 0.00948594 Jy ! Component: 2800 - total flux cleaned = 0.00975688 Jy ! Component: 2850 - total flux cleaned = 0.00994896 Jy ! Component: 2900 - total flux cleaned = 0.0101773 Jy ! Component: 2950 - total flux cleaned = 0.0105926 Jy ! Component: 3000 - total flux cleaned = 0.010892 Jy ! Component: 3050 - total flux cleaned = 0.0110779 Jy ! Component: 3100 - total flux cleaned = 0.0114089 Jy ! Component: 3150 - total flux cleaned = 0.0117374 Jy ! Component: 3200 - total flux cleaned = 0.0120266 Jy ! Component: 3250 - total flux cleaned = 0.0122783 Jy ! Component: 3300 - total flux cleaned = 0.0125634 Jy ! Component: 3350 - total flux cleaned = 0.0128811 Jy ! Component: 3400 - total flux cleaned = 0.0130565 Jy ! Component: 3450 - total flux cleaned = 0.0134737 Jy ! Component: 3500 - total flux cleaned = 0.013646 Jy ! Component: 3550 - total flux cleaned = 0.0138171 Jy ! Component: 3600 - total flux cleaned = 0.014123 Jy ! Component: 3650 - total flux cleaned = 0.0142576 Jy ! Component: 3700 - total flux cleaned = 0.0145586 Jy ! Component: 3750 - total flux cleaned = 0.0147248 Jy ! Component: 3800 - total flux cleaned = 0.014791 Jy ! Component: 3850 - total flux cleaned = 0.0150856 Jy ! Component: 3900 - total flux cleaned = 0.0152156 Jy ! Component: 3950 - total flux cleaned = 0.0154412 Jy ! Component: 4000 - total flux cleaned = 0.0156014 Jy ! Component: 4050 - total flux cleaned = 0.0157605 Jy ! Total flux subtracted in 4096 components = 0.0159185 Jy ! Clean residual min=-0.001719 max=0.002100 Jy/beam ! Clean residual mean=0.000008 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.37492 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 359 components and 0.37492 Jy ![Exited script file: muppet] wmap "J1425+1424_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 6.783 at 2.707 degrees (North through East) ! Clean map min=-0.0049985 max=0.32402 Jy/beam ! Writing clean map to FITS file: J1425+1424_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.324019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000610745 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.565471 0.565471 1.13094 2.26189 4.52377 9.04754 18.0951 36.1902 72.3803 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.324 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 6.783 at 2.707 degrees (North through East) ! Clean map min=-0.0049985 max=0.32402 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1425+1424_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:08 2019