! Started logfile: J1424-1407_S_2017_05_27_pus_uvs.log on Fri May 3 11:09:08 2019 obs J1424-1407_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1424-1407_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78655 visibilities/baseline/integration-bin. ! Found source: J1424-1407 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 10760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1424-1407_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 547 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893030Jy sigma=0.258413 ! Fit after self-cal, rms=0.878733Jy sigma=0.258787 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=9.627 mas, bpa=-27.07 degrees ! Estimated noise=344.805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281072 Jy ! Component: 100 - total flux cleaned = 0.0461339 Jy ! Total flux subtracted in 100 components = 0.0461339 Jy ! Clean residual min=-0.010534 max=0.010957 Jy/beam ! Clean residual mean=0.000054 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 0.0461339 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0461339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169821Jy sigma=0.002515 ! Fit after self-cal, rms=0.169089Jy sigma=0.002493 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=9.91 mas, bpa=-27.11 degrees ! Estimated noise=322.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148676 Jy ! Component: 100 - total flux cleaned = 0.0203426 Jy ! Component: 150 - total flux cleaned = 0.0200696 Jy ! Component: 200 - total flux cleaned = 0.0200657 Jy ! Total flux subtracted in 200 components = 0.0200657 Jy ! Clean residual min=-0.014260 max=0.014257 Jy/beam ! Clean residual mean=0.000109 rms=0.004714 Jy/beam ! Combined flux in latest and established models = 0.0661996 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.0661996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158593Jy sigma=0.002881 ! Fit after self-cal, rms=0.158531Jy sigma=0.002881 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.60 HN 0.75 KP 0.67 ! LA 0.68 MK 9.51 NL 0.56 OV 0.68 ! PT 0.71 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.34 FD 0.61 HN 0.65 KP 0.65 ! LA 0.66 MK 0.09 NL 0.61 OV 0.72 ! PT 0.69 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.65 HN 0.65 KP 0.64 ! LA 0.65 MK 0.11 NL 0.62 OV 0.67 ! PT 0.69 SC 0.85 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.68 KP 1.00* ! LA 25.98 MK 5.60 NL 1.00* OV 1.00* ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.158531Jy sigma=0.002881 ! Fit after self-cal, rms=0.207409Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=7.656 mas, bpa=-10.17 degrees ! Estimated noise=507.007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138327 Jy ! Component: 100 - total flux cleaned = -0.00157758 Jy ! Component: 150 - total flux cleaned = -0.00189416 Jy ! Component: 200 - total flux cleaned = -0.0022063 Jy ! Total flux subtracted in 200 components = -0.0022063 Jy ! Clean residual min=-0.002989 max=0.004025 Jy/beam ! Clean residual mean=0.000003 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0639933 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0639933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206825Jy sigma=0.000693 ! Fit after self-cal, rms=0.206510Jy sigma=0.000682 ! Inverting map ! Added new window around map position (-33.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364217 Jy ! Component: 100 - total flux cleaned = 0.00481007 Jy ! Component: 150 - total flux cleaned = 0.00494571 Jy ! Component: 200 - total flux cleaned = 0.00482856 Jy ! Total flux subtracted in 200 components = 0.00482856 Jy ! Clean residual min=-0.002833 max=0.003127 Jy/beam ! Clean residual mean=0.000005 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0688219 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.0688219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206303Jy sigma=0.000676 ! Fit after self-cal, rms=0.206304Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206304Jy sigma=0.000676 ! Fit after self-cal, rms=0.350452Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=7.787 mas, bpa=-7.595 degrees ! Estimated noise=523.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103629 Jy ! Component: 100 - total flux cleaned = 0.00144141 Jy ! Component: 150 - total flux cleaned = 0.00183801 Jy ! Component: 200 - total flux cleaned = 0.00212622 Jy ! Total flux subtracted in 200 components = 0.00212622 Jy ! Clean residual min=-0.001608 max=0.001797 Jy/beam ! Clean residual mean=-0.000003 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0709481 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.0709481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350128Jy sigma=0.000660 ! Fit after self-cal, rms=0.350167Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427448 Jy ! Component: 100 - total flux cleaned = 0.000691572 Jy ! Component: 150 - total flux cleaned = 0.000918542 Jy ! Component: 200 - total flux cleaned = 0.0010325 Jy ! Total flux subtracted in 200 components = 0.0010325 Jy ! Clean residual min=-0.001585 max=0.001821 Jy/beam ! Clean residual mean=-0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0719806 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.0719806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349998Jy sigma=0.000659 ! Fit after self-cal, rms=0.349998Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349998Jy sigma=0.000659 ! Fit after self-cal, rms=0.431835Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.947 mas, bpa=-4.693 degrees ! Estimated noise=541.081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58319e-05 Jy ! Component: 100 - total flux cleaned = -0.000129005 Jy ! Component: 150 - total flux cleaned = 1.08832e-05 Jy ! Component: 200 - total flux cleaned = 0.000131349 Jy ! Total flux subtracted in 200 components = 0.000131349 Jy ! Clean residual min=-0.001504 max=0.001786 Jy/beam ! Clean residual mean=-0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0721119 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0721119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431473Jy sigma=0.000658 ! Fit after self-cal, rms=0.431469Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017899 Jy ! Component: 100 - total flux cleaned = 0.000335881 Jy ! Component: 150 - total flux cleaned = 0.000534325 Jy ! Component: 200 - total flux cleaned = 0.000689139 Jy ! Total flux subtracted in 200 components = 0.000689139 Jy ! Clean residual min=-0.001522 max=0.001804 Jy/beam ! Clean residual mean=-0.000004 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0728011 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0728011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431306Jy sigma=0.000658 ! Fit after self-cal, rms=0.431304Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431304Jy sigma=0.000658 ! Fit after self-cal, rms=0.520447Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.799 mas, bmaj=14.97 mas, bpa=0.06887 degrees ! Estimated noise=641.462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523687 Jy ! Component: 100 - total flux cleaned = 0.000771917 Jy ! Component: 150 - total flux cleaned = 0.000842248 Jy ! Component: 200 - total flux cleaned = 0.000895684 Jy ! Total flux subtracted in 200 components = 0.000895684 Jy ! Clean residual min=-0.001440 max=0.001833 Jy/beam ! Clean residual mean=-0.000008 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0736968 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.0736968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520394Jy sigma=0.000657 ! Fit after self-cal, rms=0.520394Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.92189e-05 Jy ! Component: 100 - total flux cleaned = 0.00012906 Jy ! Component: 150 - total flux cleaned = 0.00018422 Jy ! Component: 200 - total flux cleaned = 0.000218494 Jy ! Total flux subtracted in 200 components = 0.000218494 Jy ! Clean residual min=-0.001449 max=0.001840 Jy/beam ! Clean residual mean=-0.000008 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0739153 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.0739153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520354Jy sigma=0.000657 ! Fit after self-cal, rms=0.520353Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=8.128 mas, bpa=-2.156 degrees ! Estimated noise=555.265 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 8.128 at -2.156 degrees (North through East) ! Clean map min=-0.0014488 max=0.060791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=7.081 mas, bpa=-6.457 degrees ! Estimated noise=716.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472807 Jy ! Component: 100 - total flux cleaned = 0.0604072 Jy ! Component: 150 - total flux cleaned = 0.0657294 Jy ! Component: 200 - total flux cleaned = 0.0674033 Jy ! Total flux subtracted in 200 components = 0.0674033 Jy ! Clean residual min=-0.003028 max=0.003178 Jy/beam ! Clean residual mean=-0.000003 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0674032 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0674032 Jy ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=8.128 mas, bpa=-2.156 degrees ! Estimated noise=555.265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228993 Jy ! Component: 100 - total flux cleaned = 0.00295518 Jy ! Component: 150 - total flux cleaned = 0.00341645 Jy ! Component: 200 - total flux cleaned = 0.00374663 Jy ! Total flux subtracted in 200 components = 0.00374663 Jy ! Clean residual min=-0.001939 max=0.002074 Jy/beam ! Clean residual mean=-0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0711499 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.0711499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.799 mas, bmaj=14.97 mas, bpa=0.06887 degrees ! Estimated noise=641.462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112885 Jy ! Component: 100 - total flux cleaned = 0.00178408 Jy ! Component: 150 - total flux cleaned = 0.00210928 Jy ! Component: 200 - total flux cleaned = 0.00221921 Jy ! Total flux subtracted in 200 components = 0.00221921 Jy ! Clean residual min=-0.001427 max=0.001819 Jy/beam ! Clean residual mean=-0.000007 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0733691 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38967e-05 Jy ! Component: 100 - total flux cleaned = 0.000147922 Jy ! Component: 150 - total flux cleaned = 0.000220047 Jy ! Component: 200 - total flux cleaned = 0.000264584 Jy ! Total flux subtracted in 200 components = 0.000264584 Jy ! Clean residual min=-0.001431 max=0.001822 Jy/beam ! Clean residual mean=-0.000007 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0736337 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 64 components and 0.0736337 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=8.128 mas, bpa=-2.156 degrees ! Estimated noise=555.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146681 Jy ! Component: 100 - total flux cleaned = -0.00014904 Jy ! Component: 150 - total flux cleaned = -3.22281e-05 Jy ! Component: 200 - total flux cleaned = -6.51735e-06 Jy ! Total flux subtracted in 200 components = -6.51735e-06 Jy ! Clean residual min=-0.001668 max=0.001978 Jy/beam ! Clean residual mean=-0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0736272 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0736272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.519381Jy sigma=0.000660 ! Fit after self-cal, rms=0.519341Jy sigma=0.000660 wmodel J1424-1407_S_2017_05_27_pus_map.mod ! Writing 76 model components to file: J1424-1407_S_2017_05_27_pus_map.mod wobs J1424-1407_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1424-1407_S_2017_05_27_pus_uvs.fits wwins J1424-1407_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1424-1407_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063205 Jy ! Component: 100 - total flux cleaned = 0.000915411 Jy ! Component: 150 - total flux cleaned = 0.000945099 Jy ! Component: 200 - total flux cleaned = 0.000973755 Jy ! Component: 250 - total flux cleaned = 0.000946203 Jy ! Component: 300 - total flux cleaned = 0.000972638 Jy ! Component: 350 - total flux cleaned = 0.000894409 Jy ! Component: 400 - total flux cleaned = 0.000792676 Jy ! Component: 450 - total flux cleaned = 0.000693743 Jy ! Component: 500 - total flux cleaned = 0.000670208 Jy ! Component: 550 - total flux cleaned = 0.000693947 Jy ! Component: 600 - total flux cleaned = 0.000624294 Jy ! Component: 650 - total flux cleaned = 0.000601931 Jy ! Component: 700 - total flux cleaned = 0.000557092 Jy ! Component: 750 - total flux cleaned = 0.000534921 Jy ! Component: 800 - total flux cleaned = 0.000449113 Jy ! Component: 850 - total flux cleaned = 0.000448851 Jy ! Component: 900 - total flux cleaned = 0.000407011 Jy ! Component: 950 - total flux cleaned = 0.000325197 Jy ! Component: 1000 - total flux cleaned = 0.000345552 Jy ! Component: 1050 - total flux cleaned = 0.000325718 Jy ! Component: 1100 - total flux cleaned = 0.000306233 Jy ! Component: 1150 - total flux cleaned = 0.000248268 Jy ! Component: 1200 - total flux cleaned = 0.000267304 Jy ! Component: 1250 - total flux cleaned = 0.000286092 Jy ! Component: 1300 - total flux cleaned = 0.000304962 Jy ! Component: 1350 - total flux cleaned = 0.000360211 Jy ! Component: 1400 - total flux cleaned = 0.000396441 Jy ! Component: 1450 - total flux cleaned = 0.000378286 Jy ! Component: 1500 - total flux cleaned = 0.00043154 Jy ! Component: 1550 - total flux cleaned = 0.000414018 Jy ! Component: 1600 - total flux cleaned = 0.000448833 Jy ! Component: 1650 - total flux cleaned = 0.000466082 Jy ! Component: 1700 - total flux cleaned = 0.000483038 Jy ! Component: 1750 - total flux cleaned = 0.000499928 Jy ! Component: 1800 - total flux cleaned = 0.00048303 Jy ! Component: 1850 - total flux cleaned = 0.000499424 Jy ! Component: 1900 - total flux cleaned = 0.000499168 Jy ! Component: 1950 - total flux cleaned = 0.000467107 Jy ! Component: 2000 - total flux cleaned = 0.000451464 Jy ! Component: 2050 - total flux cleaned = 0.000467208 Jy ! Component: 2100 - total flux cleaned = 0.000435987 Jy ! Component: 2150 - total flux cleaned = 0.000482529 Jy ! Component: 2200 - total flux cleaned = 0.000467047 Jy ! Component: 2250 - total flux cleaned = 0.000482165 Jy ! Component: 2300 - total flux cleaned = 0.000437043 Jy ! Component: 2350 - total flux cleaned = 0.000481907 Jy ! Component: 2400 - total flux cleaned = 0.000496643 Jy ! Component: 2450 - total flux cleaned = 0.000496523 Jy ! Component: 2500 - total flux cleaned = 0.00048201 Jy ! Component: 2550 - total flux cleaned = 0.000496491 Jy ! Component: 2600 - total flux cleaned = 0.000453895 Jy ! Component: 2650 - total flux cleaned = 0.000496366 Jy ! Component: 2700 - total flux cleaned = 0.000510311 Jy ! Component: 2750 - total flux cleaned = 0.000551948 Jy ! Component: 2800 - total flux cleaned = 0.00056552 Jy ! Component: 2850 - total flux cleaned = 0.000565433 Jy ! Component: 2900 - total flux cleaned = 0.000578803 Jy ! Component: 2950 - total flux cleaned = 0.000565381 Jy ! Component: 3000 - total flux cleaned = 0.000591901 Jy ! Component: 3050 - total flux cleaned = 0.000565452 Jy ! Component: 3100 - total flux cleaned = 0.000591669 Jy ! Component: 3150 - total flux cleaned = 0.000604633 Jy ! Component: 3200 - total flux cleaned = 0.00061751 Jy ! Component: 3250 - total flux cleaned = 0.000617381 Jy ! Component: 3300 - total flux cleaned = 0.000617329 Jy ! Component: 3350 - total flux cleaned = 0.000617336 Jy ! Component: 3400 - total flux cleaned = 0.000617369 Jy ! Component: 3450 - total flux cleaned = 0.000679644 Jy ! Component: 3500 - total flux cleaned = 0.000630081 Jy ! Component: 3550 - total flux cleaned = 0.000667115 Jy ! Component: 3600 - total flux cleaned = 0.000667156 Jy ! Component: 3650 - total flux cleaned = 0.000703719 Jy ! Component: 3700 - total flux cleaned = 0.000691668 Jy ! Component: 3750 - total flux cleaned = 0.000763917 Jy ! Component: 3800 - total flux cleaned = 0.000751841 Jy ! Component: 3850 - total flux cleaned = 0.000775546 Jy ! Component: 3900 - total flux cleaned = 0.000799206 Jy ! Component: 3950 - total flux cleaned = 0.000810876 Jy ! Component: 4000 - total flux cleaned = 0.000834328 Jy ! Component: 4050 - total flux cleaned = 0.000880988 Jy ! Total flux subtracted in 4096 components = 0.000904225 Jy ! Clean residual min=-0.000685 max=0.000683 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0745314 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 309 components and 0.0745314 Jy ![Exited script file: muppet] wmap "J1424-1407_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 8.128 at -2.156 degrees (North through East) ! Clean map min=-0.0013717 max=0.061472 Jy/beam ! Writing clean map to FITS file: J1424-1407_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0614722 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020195 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.985567 0.985567 1.97113 3.94227 7.88453 15.7691 31.5381 63.0763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 8.128 at -2.156 degrees (North through East) ! Clean map min=-0.0013717 max=0.061472 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1424-1407_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:09:13 2019