! Started logfile: J1424+4705_S_2017_01_21_pus_uvs.log on Sun May 5 15:55:58 2019 obs J1424+4705_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1424+4705_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.7327 visibilities/baseline/integration-bin. ! Found source: J1424+4705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 12028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1424+4705_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891889Jy sigma=0.006996 ! Fit after self-cal, rms=0.878129Jy sigma=0.006911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=4.166 mas, bpa=-3.636 degrees ! Estimated noise=1492.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100324 Jy ! Component: 100 - total flux cleaned = 0.122391 Jy ! Total flux subtracted in 100 components = 0.122391 Jy ! Clean residual min=-0.004947 max=0.006988 Jy/beam ! Clean residual mean=-0.000007 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.122391 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.122391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100990Jy sigma=0.000674 ! Fit after self-cal, rms=0.100962Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=4.766 mas, bpa=-1.675 degrees ! Estimated noise=897.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893073 Jy ! Component: 100 - total flux cleaned = 0.012613 Jy ! Component: 150 - total flux cleaned = 0.0142776 Jy ! Component: 200 - total flux cleaned = 0.0142779 Jy ! Total flux subtracted in 200 components = 0.0142779 Jy ! Clean residual min=-0.003364 max=0.005624 Jy/beam ! Clean residual mean=-0.000008 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.136669 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.136669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100644Jy sigma=0.000665 ! Fit after self-cal, rms=0.100616Jy sigma=0.000665 ! Inverting map ! Added new window around map position (-19, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559626 Jy ! Component: 100 - total flux cleaned = 0.0084825 Jy ! Component: 150 - total flux cleaned = 0.00938516 Jy ! Component: 200 - total flux cleaned = 0.00999278 Jy ! Total flux subtracted in 200 components = 0.00999278 Jy ! Clean residual min=-0.003039 max=0.004340 Jy/beam ! Clean residual mean=-0.000011 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.146662 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.146662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100185Jy sigma=0.000662 ! Fit after self-cal, rms=0.100155Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.92 LA 1.01 ! MK 0.99 NL 0.99 OV 1.09 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 LA 0.99 ! MK 0.98 NL 0.98 OV 1.17 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 LA 1.01 ! MK 0.99 NL 0.95 OV 1.07 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00 LA 1.04 ! MK 1.10 NL 1.00* OV 1.07 PT 1.01 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.100155Jy sigma=0.000662 ! Fit after self-cal, rms=0.103803Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=4.749 mas, bpa=-2.025 degrees ! Estimated noise=897.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715014 Jy ! Component: 100 - total flux cleaned = 0.000668354 Jy ! Component: 150 - total flux cleaned = 0.000626244 Jy ! Component: 200 - total flux cleaned = 0.000765643 Jy ! Total flux subtracted in 200 components = 0.000765643 Jy ! Clean residual min=-0.002607 max=0.003057 Jy/beam ! Clean residual mean=-0.000009 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.147428 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.147428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103741Jy sigma=0.000659 ! Fit after self-cal, rms=0.103852Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103852Jy sigma=0.000659 ! Fit after self-cal, rms=0.114364Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=4.756 mas, bpa=-1.973 degrees ! Estimated noise=902.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383645 Jy ! Component: 100 - total flux cleaned = -0.000458123 Jy ! Component: 150 - total flux cleaned = -0.000578279 Jy ! Component: 200 - total flux cleaned = -0.000655827 Jy ! Total flux subtracted in 200 components = -0.000655827 Jy ! Clean residual min=-0.002162 max=0.002716 Jy/beam ! Clean residual mean=0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.146772 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.146772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114344Jy sigma=0.000656 ! Fit after self-cal, rms=0.114541Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (93, -77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185857 Jy ! Component: 100 - total flux cleaned = 0.00211249 Jy ! Component: 150 - total flux cleaned = 0.00192869 Jy ! Component: 200 - total flux cleaned = 0.0016956 Jy ! Total flux subtracted in 200 components = 0.0016956 Jy ! Clean residual min=-0.001877 max=0.002298 Jy/beam ! Clean residual mean=-0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.148467 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.148467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114471Jy sigma=0.000655 ! Fit after self-cal, rms=0.114465Jy sigma=0.000655 ! Inverting map ! Added new window around map position (-19, 100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588941 Jy ! Component: 100 - total flux cleaned = 0.000775607 Jy ! Component: 150 - total flux cleaned = 0.00110806 Jy ! Component: 200 - total flux cleaned = 0.00114311 Jy ! Total flux subtracted in 200 components = 0.00114311 Jy ! Clean residual min=-0.001837 max=0.002017 Jy/beam ! Clean residual mean=-0.000000 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.149611 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.149611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114393Jy sigma=0.000655 ! Fit after self-cal, rms=0.114380Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114380Jy sigma=0.000655 ! Fit after self-cal, rms=0.115537Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=4.758 mas, bpa=-2.004 degrees ! Estimated noise=901.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499552 Jy ! Component: 100 - total flux cleaned = 0.000379769 Jy ! Component: 150 - total flux cleaned = 0.000343808 Jy ! Component: 200 - total flux cleaned = 0.000376719 Jy ! Total flux subtracted in 200 components = 0.000376719 Jy ! Clean residual min=-0.001826 max=0.001956 Jy/beam ! Clean residual mean=0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.149987 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.149987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115503Jy sigma=0.000654 ! Fit after self-cal, rms=0.115518Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236529 Jy ! Component: 100 - total flux cleaned = 0.000205349 Jy ! Component: 150 - total flux cleaned = 0.000147251 Jy ! Component: 200 - total flux cleaned = 6.46742e-05 Jy ! Total flux subtracted in 200 components = 6.46742e-05 Jy ! Clean residual min=-0.001808 max=0.001923 Jy/beam ! Clean residual mean=0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.150052 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 121 components and 0.150052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115500Jy sigma=0.000654 ! Fit after self-cal, rms=0.115494Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115494Jy sigma=0.000654 ! Fit after self-cal, rms=0.115802Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.918 mas, bmaj=8.247 mas, bpa=14.73 degrees ! Estimated noise=1188.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.57386e-05 Jy ! Component: 100 - total flux cleaned = 0.000165818 Jy ! Component: 150 - total flux cleaned = 0.000308755 Jy ! Component: 200 - total flux cleaned = 0.000439647 Jy ! Total flux subtracted in 200 components = 0.000439647 Jy ! Clean residual min=-0.002258 max=0.002346 Jy/beam ! Clean residual mean=0.000010 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.150492 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.150492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115801Jy sigma=0.000654 ! Fit after self-cal, rms=0.115811Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85813e-05 Jy ! Component: 100 - total flux cleaned = 0.000141675 Jy ! Component: 150 - total flux cleaned = 0.000333633 Jy ! Component: 200 - total flux cleaned = 0.000462154 Jy ! Total flux subtracted in 200 components = 0.000462154 Jy ! Clean residual min=-0.002237 max=0.002325 Jy/beam ! Clean residual mean=0.000010 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.150954 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 155 components and 0.150954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115812Jy sigma=0.000654 ! Fit after self-cal, rms=0.115813Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=4.758 mas, bpa=-2.103 degrees ! Estimated noise=900.963 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.373 x 4.758 at -2.103 degrees (North through East) ! Clean map min=-0.0020824 max=0.12927 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=4.161 mas, bpa=-3.704 degrees ! Estimated noise=1506.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101101 Jy ! Component: 100 - total flux cleaned = 0.123613 Jy ! Component: 150 - total flux cleaned = 0.131787 Jy ! Component: 200 - total flux cleaned = 0.137082 Jy ! Total flux subtracted in 200 components = 0.137082 Jy ! Clean residual min=-0.003890 max=0.003842 Jy/beam ! Clean residual mean=0.000000 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.137082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.137082 Jy ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=4.758 mas, bpa=-2.103 degrees ! Estimated noise=900.963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433569 Jy ! Component: 100 - total flux cleaned = 0.00653382 Jy ! Component: 150 - total flux cleaned = 0.00775326 Jy ! Component: 200 - total flux cleaned = 0.00847136 Jy ! Total flux subtracted in 200 components = 0.00847136 Jy ! Clean residual min=-0.002049 max=0.002204 Jy/beam ! Clean residual mean=0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.145553 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.145553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.918 mas, bmaj=8.247 mas, bpa=14.73 degrees ! Estimated noise=1188.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227099 Jy ! Component: 100 - total flux cleaned = 0.0033806 Jy ! Component: 150 - total flux cleaned = 0.00411903 Jy ! Component: 200 - total flux cleaned = 0.00472434 Jy ! Total flux subtracted in 200 components = 0.00472434 Jy ! Clean residual min=-0.002329 max=0.002185 Jy/beam ! Clean residual mean=0.000009 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.150277 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578282 Jy ! Component: 100 - total flux cleaned = 0.000926933 Jy ! Component: 150 - total flux cleaned = 0.00127968 Jy ! Component: 200 - total flux cleaned = 0.00154494 Jy ! Total flux subtracted in 200 components = 0.00154494 Jy ! Clean residual min=-0.002268 max=0.002263 Jy/beam ! Clean residual mean=0.000010 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.151822 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 87 components and 0.151822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=4.758 mas, bpa=-2.103 degrees ! Estimated noise=900.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75701e-06 Jy ! Component: 100 - total flux cleaned = -3.43671e-06 Jy ! Component: 150 - total flux cleaned = -5.24709e-05 Jy ! Component: 200 - total flux cleaned = -8.48035e-06 Jy ! Total flux subtracted in 200 components = -8.48035e-06 Jy ! Clean residual min=-0.001925 max=0.002006 Jy/beam ! Clean residual mean=0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.151814 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.151814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115903Jy sigma=0.000655 ! Fit after self-cal, rms=0.115883Jy sigma=0.000655 wmodel J1424+4705_S_2017_01_21_pus_map.mod ! Writing 105 model components to file: J1424+4705_S_2017_01_21_pus_map.mod wobs J1424+4705_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1424+4705_S_2017_01_21_pus_uvs.fits wwins J1424+4705_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1424+4705_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303318 Jy ! Component: 100 - total flux cleaned = 0.000679597 Jy ! Component: 150 - total flux cleaned = 0.000942078 Jy ! Component: 200 - total flux cleaned = 0.00113302 Jy ! Component: 250 - total flux cleaned = 0.00134812 Jy ! Component: 300 - total flux cleaned = 0.00149738 Jy ! Component: 350 - total flux cleaned = 0.00173074 Jy ! Component: 400 - total flux cleaned = 0.00184467 Jy ! Component: 450 - total flux cleaned = 0.00198425 Jy ! Component: 500 - total flux cleaned = 0.00209407 Jy ! Component: 550 - total flux cleaned = 0.00222903 Jy ! Component: 600 - total flux cleaned = 0.00236057 Jy ! Component: 650 - total flux cleaned = 0.00238667 Jy ! Component: 700 - total flux cleaned = 0.00246378 Jy ! Component: 750 - total flux cleaned = 0.00243888 Jy ! Component: 800 - total flux cleaned = 0.00256348 Jy ! Component: 850 - total flux cleaned = 0.00261219 Jy ! Component: 900 - total flux cleaned = 0.00263632 Jy ! Component: 950 - total flux cleaned = 0.0026365 Jy ! Component: 1000 - total flux cleaned = 0.00275384 Jy ! Component: 1050 - total flux cleaned = 0.00275354 Jy ! Component: 1100 - total flux cleaned = 0.00284511 Jy ! Component: 1150 - total flux cleaned = 0.00282301 Jy ! Component: 1200 - total flux cleaned = 0.00293484 Jy ! Component: 1250 - total flux cleaned = 0.00289064 Jy ! Component: 1300 - total flux cleaned = 0.00293435 Jy ! Component: 1350 - total flux cleaned = 0.00291304 Jy ! Component: 1400 - total flux cleaned = 0.00295596 Jy ! Component: 1450 - total flux cleaned = 0.00304026 Jy ! Component: 1500 - total flux cleaned = 0.00299835 Jy ! Component: 1550 - total flux cleaned = 0.00308101 Jy ! Component: 1600 - total flux cleaned = 0.00316284 Jy ! Component: 1650 - total flux cleaned = 0.00318329 Jy ! Component: 1700 - total flux cleaned = 0.0032837 Jy ! Component: 1750 - total flux cleaned = 0.00330365 Jy ! Component: 1800 - total flux cleaned = 0.00336286 Jy ! Component: 1850 - total flux cleaned = 0.00351866 Jy ! Component: 1900 - total flux cleaned = 0.00361473 Jy ! Component: 1950 - total flux cleaned = 0.00363383 Jy ! Component: 2000 - total flux cleaned = 0.0037094 Jy ! Component: 2050 - total flux cleaned = 0.00382186 Jy ! Component: 2100 - total flux cleaned = 0.00380329 Jy ! Component: 2150 - total flux cleaned = 0.00385869 Jy ! Component: 2200 - total flux cleaned = 0.00395037 Jy ! Component: 2250 - total flux cleaned = 0.00400507 Jy ! Component: 2300 - total flux cleaned = 0.00411293 Jy ! Component: 2350 - total flux cleaned = 0.00418426 Jy ! Component: 2400 - total flux cleaned = 0.00429019 Jy ! Component: 2450 - total flux cleaned = 0.00439552 Jy ! Component: 2500 - total flux cleaned = 0.00456927 Jy ! Component: 2550 - total flux cleaned = 0.00460349 Jy ! Component: 2600 - total flux cleaned = 0.00468914 Jy ! Component: 2650 - total flux cleaned = 0.00477408 Jy ! Component: 2700 - total flux cleaned = 0.00490883 Jy ! Component: 2750 - total flux cleaned = 0.00497561 Jy ! Component: 2800 - total flux cleaned = 0.00502575 Jy ! Component: 2850 - total flux cleaned = 0.005207 Jy ! Component: 2900 - total flux cleaned = 0.00532144 Jy ! Component: 2950 - total flux cleaned = 0.0053864 Jy ! Component: 3000 - total flux cleaned = 0.00548309 Jy ! Component: 3050 - total flux cleaned = 0.00551509 Jy ! Component: 3100 - total flux cleaned = 0.0056897 Jy ! Component: 3150 - total flux cleaned = 0.00576841 Jy ! Component: 3200 - total flux cleaned = 0.00584657 Jy ! Component: 3250 - total flux cleaned = 0.0059398 Jy ! Component: 3300 - total flux cleaned = 0.00604787 Jy ! Component: 3350 - total flux cleaned = 0.00609397 Jy ! Component: 3400 - total flux cleaned = 0.00616983 Jy ! Component: 3450 - total flux cleaned = 0.00632093 Jy ! Component: 3500 - total flux cleaned = 0.00639588 Jy ! Component: 3550 - total flux cleaned = 0.00647045 Jy ! Component: 3600 - total flux cleaned = 0.00655931 Jy ! Component: 3650 - total flux cleaned = 0.0066328 Jy ! Component: 3700 - total flux cleaned = 0.0067207 Jy ! Component: 3750 - total flux cleaned = 0.00679339 Jy ! Component: 3800 - total flux cleaned = 0.00687993 Jy ! Component: 3850 - total flux cleaned = 0.007009 Jy ! Component: 3900 - total flux cleaned = 0.00700899 Jy ! Component: 3950 - total flux cleaned = 0.00710822 Jy ! Component: 4000 - total flux cleaned = 0.00715051 Jy ! Component: 4050 - total flux cleaned = 0.00726251 Jy ! Total flux subtracted in 4096 components = 0.00737376 Jy ! Clean residual min=-0.000948 max=0.000759 Jy/beam ! Clean residual mean=0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.159188 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 386 components and 0.159188 Jy ![Exited script file: muppet] wmap "J1424+4705_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.373 x 4.758 at -2.103 degrees (North through East) ! Clean map min=-0.0016018 max=0.12945 Jy/beam ! Writing clean map to FITS file: J1424+4705_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129452 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238987 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553844 0.553844 1.10769 2.21538 4.43075 8.8615 17.723 35.446 70.892 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.373 x 4.758 at -2.103 degrees (North through East) ! Clean map min=-0.0016018 max=0.12945 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1424+4705_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:56:03 2019