! Started logfile: J1424+225C_X_2017_07_16_pus_uvs.log on Thu May 9 14:06:03 2019 obs J1424+225C_X_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1424+225C_X_2017_07_16_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.679307 visibilities/baseline/integration-bin. ! Found source: J1424+225C ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1200 lines of history. ! ! Reading 79968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.3 print "taper_size =",taper_size ! taper_size = 40 ![@muppet J1424+225C_X_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 464 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 464 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984148Jy sigma=0.007936 ! Fit after self-cal, rms=0.933980Jy sigma=0.007539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.7297 mas, bmaj=1.689 mas, bpa=16.88 degrees ! Estimated noise=692.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0459703 Jy ! Component: 100 - total flux cleaned = 0.0616428 Jy ! Total flux subtracted in 100 components = 0.0616428 Jy ! Clean residual min=-0.006736 max=0.008408 Jy/beam ! Clean residual mean=0.000000 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.0616428 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0616428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121005Jy sigma=0.000886 ! Fit after self-cal, rms=0.120351Jy sigma=0.000880 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120135 Jy ! Component: 100 - total flux cleaned = 0.0208601 Jy ! Total flux subtracted in 100 components = 0.0208601 Jy ! Clean residual min=-0.005812 max=0.007651 Jy/beam ! Clean residual mean=0.000000 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.0825028 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0825028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117504Jy sigma=0.000854 ! Fit after self-cal, rms=0.117481Jy sigma=0.000853 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Added new window around map position (1.2, 0.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898779 Jy ! Component: 100 - total flux cleaned = 0.0159995 Jy ! Total flux subtracted in 100 components = 0.0159995 Jy ! Clean residual min=-0.005614 max=0.007436 Jy/beam ! Clean residual mean=0.000000 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0985024 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.0985024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115862Jy sigma=0.000838 ! Fit after self-cal, rms=0.115800Jy sigma=0.000837 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Added new window around map position (-1.2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817236 Jy ! Component: 100 - total flux cleaned = 0.0148052 Jy ! Total flux subtracted in 100 components = 0.0148052 Jy ! Clean residual min=-0.004880 max=0.005497 Jy/beam ! Clean residual mean=0.000000 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.113308 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.113308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114467Jy sigma=0.000825 ! Fit after self-cal, rms=0.114427Jy sigma=0.000824 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Added new window around map position (-3.6, 8.1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705647 Jy ! Component: 100 - total flux cleaned = 0.0127811 Jy ! Total flux subtracted in 100 components = 0.0127811 Jy ! Clean residual min=-0.004830 max=0.005159 Jy/beam ! Clean residual mean=0.000000 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.126089 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.126089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113448Jy sigma=0.000815 ! Fit after self-cal, rms=0.113418Jy sigma=0.000814 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9263 mas, bmaj=1.951 mas, bpa=12.71 degrees ! Estimated noise=335.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118403 Jy ! Component: 100 - total flux cleaned = 0.020835 Jy ! Component: 150 - total flux cleaned = 0.0279403 Jy ! Component: 200 - total flux cleaned = 0.0336737 Jy ! Total flux subtracted in 200 components = 0.0336737 Jy ! Clean residual min=-0.004900 max=0.007040 Jy/beam ! Clean residual mean=0.000001 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.159762 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.159762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111677Jy sigma=0.000798 ! Fit after self-cal, rms=0.111576Jy sigma=0.000797 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Added new window around map position (2.7, 2.7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664361 Jy ! Component: 100 - total flux cleaned = 0.0114292 Jy ! Component: 150 - total flux cleaned = 0.0153326 Jy ! Component: 200 - total flux cleaned = 0.0185592 Jy ! Total flux subtracted in 200 components = 0.0185592 Jy ! Clean residual min=-0.004145 max=0.004716 Jy/beam ! Clean residual mean=0.000000 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.178321 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.178321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111060Jy sigma=0.000791 ! Fit after self-cal, rms=0.111012Jy sigma=0.000791 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* HN 0.90 KP 0.82 ! LA 0.80 MK 0.92 NL 0.94 OV 0.86 ! PT 1.86 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.08 KP 0.97 ! LA 0.99 MK 0.96 NL 1.08 OV 0.81 ! PT 1.44 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.85 KP 1.05 ! LA 1.05 MK 1.06 NL 1.23 OV 0.90 ! PT 1.19 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 0.89 KP 1.09 ! LA 1.13 MK 1.03 NL 1.13 OV 0.91 ! PT 1.11 SC 0.85 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 0.90 KP 1.19 ! LA 0.99 MK 0.97 NL 1.10 OV 0.84 ! PT 1.08 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.95 KP 0.93 ! LA 0.89 MK 0.96 NL 1.09 OV 1.08 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* HN 0.96 KP 0.97 ! LA 0.86 MK 1.04 NL 1.06 OV 1.15 ! PT 0.83 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 1.04 KP 1.04 ! LA 0.77 MK 0.99 NL 0.97 OV 1.10 ! PT 0.93 SC 1.20 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 KP 0.92 ! LA 1.02 MK 0.85 NL 0.99 OV 1.02 ! PT 1.06 SC 1.24 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.09 KP 0.97 ! LA 0.97 MK 0.93 NL 0.99 OV 0.91 ! PT 1.10 SC 1.07 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.04 KP 1.09 ! LA 0.94 MK 0.87 NL 0.96 OV 0.90 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 0.98 KP 1.15 ! LA 0.89 MK 0.77 NL 1.07 OV 0.89 ! PT 0.93 SC 0.97 ! ! ! Fit before self-cal, rms=0.111012Jy sigma=0.000791 ! Fit after self-cal, rms=0.112444Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9253 mas, bmaj=1.952 mas, bpa=12.42 degrees ! Estimated noise=321.541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211982 Jy ! Component: 100 - total flux cleaned = 0.00229626 Jy ! Component: 150 - total flux cleaned = 0.00222055 Jy ! Component: 200 - total flux cleaned = 0.00187038 Jy ! Total flux subtracted in 200 components = 0.00187038 Jy ! Clean residual min=-0.003889 max=0.004263 Jy/beam ! Clean residual mean=0.000000 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.180192 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.180192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112316Jy sigma=0.000780 ! Fit after self-cal, rms=0.112729Jy sigma=0.000778 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112729Jy sigma=0.000778 ! Fit after self-cal, rms=0.126998Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9289 mas, bmaj=2.006 mas, bpa=11.11 degrees ! Estimated noise=326.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153782 Jy ! Component: 100 - total flux cleaned = 0.00160871 Jy ! Component: 150 - total flux cleaned = 0.00160795 Jy ! Component: 200 - total flux cleaned = 0.00172464 Jy ! Total flux subtracted in 200 components = 0.00172464 Jy ! Clean residual min=-0.003132 max=0.003117 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.181917 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.181916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126910Jy sigma=0.000759 ! Fit after self-cal, rms=0.127806Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000651136 Jy ! Component: 100 - total flux cleaned = 0.000418133 Jy ! Component: 150 - total flux cleaned = 4.05351e-06 Jy ! Component: 200 - total flux cleaned = -0.00027618 Jy ! Total flux subtracted in 200 components = -0.00027618 Jy ! Clean residual min=-0.003015 max=0.002924 Jy/beam ! Clean residual mean=0.000000 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.18164 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.18164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127762Jy sigma=0.000756 ! Fit after self-cal, rms=0.127762Jy sigma=0.000756 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127762Jy sigma=0.000756 ! Fit after self-cal, rms=0.134279Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9277 mas, bmaj=2.014 mas, bpa=10.97 degrees ! Estimated noise=324.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772851 Jy ! Component: 100 - total flux cleaned = 0.000717061 Jy ! Component: 150 - total flux cleaned = 0.000668172 Jy ! Component: 200 - total flux cleaned = 0.00050159 Jy ! Total flux subtracted in 200 components = 0.00050159 Jy ! Clean residual min=-0.002881 max=0.002872 Jy/beam ! Clean residual mean=0.000000 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.182142 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.182142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134246Jy sigma=0.000754 ! Fit after self-cal, rms=0.134533Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239097 Jy ! Component: 100 - total flux cleaned = 3.01225e-05 Jy ! Component: 150 - total flux cleaned = -0.000160911 Jy ! Component: 200 - total flux cleaned = -0.000301465 Jy ! Total flux subtracted in 200 components = -0.000301465 Jy ! Clean residual min=-0.002829 max=0.002771 Jy/beam ! Clean residual mean=0.000000 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.18184 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.18184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134511Jy sigma=0.000754 ! Fit after self-cal, rms=0.134515Jy sigma=0.000754 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134515Jy sigma=0.000754 ! Fit after self-cal, rms=0.136367Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=2.839 mas, bmaj=3.528 mas, bpa=-6.021 degrees ! Estimated noise=575.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000691007 Jy ! Component: 100 - total flux cleaned = -0.000939361 Jy ! Component: 150 - total flux cleaned = -0.00104174 Jy ! Component: 200 - total flux cleaned = -0.0010369 Jy ! Total flux subtracted in 200 components = -0.0010369 Jy ! Clean residual min=-0.005470 max=0.005867 Jy/beam ! Clean residual mean=0.000001 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.180804 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.180804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136364Jy sigma=0.000754 ! Fit after self-cal, rms=0.136474Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188016 Jy ! Component: 100 - total flux cleaned = -0.000232101 Jy ! Component: 150 - total flux cleaned = -0.000267086 Jy ! Component: 200 - total flux cleaned = -0.00026706 Jy ! Total flux subtracted in 200 components = -0.00026706 Jy ! Clean residual min=-0.005336 max=0.005639 Jy/beam ! Clean residual mean=0.000001 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.180537 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 0.180536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136476Jy sigma=0.000754 ! Fit after self-cal, rms=0.136472Jy sigma=0.000754 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9265 mas, bmaj=2.015 mas, bpa=10.94 degrees ! Estimated noise=322.276 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.015 at 10.94 degrees (North through East) ! Clean map min=-0.0033144 max=0.070069 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.7369 mas, bmaj=1.741 mas, bpa=14.38 degrees ! Estimated noise=686.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422089 Jy ! Component: 100 - total flux cleaned = 0.0613393 Jy ! Component: 150 - total flux cleaned = 0.0757939 Jy ! Component: 200 - total flux cleaned = 0.0878348 Jy ! Total flux subtracted in 200 components = 0.0878348 Jy ! Clean residual min=-0.006711 max=0.007427 Jy/beam ! Clean residual mean=0.000000 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.0878348 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0878348 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9265 mas, bmaj=2.015 mas, bpa=10.94 degrees ! Estimated noise=322.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198317 Jy ! Component: 100 - total flux cleaned = 0.0347755 Jy ! Component: 150 - total flux cleaned = 0.0467934 Jy ! Component: 200 - total flux cleaned = 0.056618 Jy ! Total flux subtracted in 200 components = 0.056618 Jy ! Clean residual min=-0.004818 max=0.006793 Jy/beam ! Clean residual mean=0.000000 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.144453 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.144453 Jy ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Added new window around map position (5.1, -6.9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818772 Jy ! Component: 100 - total flux cleaned = 0.0148928 Jy ! Component: 150 - total flux cleaned = 0.0204598 Jy ! Component: 200 - total flux cleaned = 0.024746 Jy ! Total flux subtracted in 200 components = 0.024746 Jy ! Clean residual min=-0.003894 max=0.003568 Jy/beam ! Clean residual mean=0.000000 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.169199 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 57 components and 0.169199 Jy ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=2.839 mas, bmaj=3.528 mas, bpa=-6.021 degrees ! Estimated noise=575.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772009 Jy ! Component: 100 - total flux cleaned = 0.00966609 Jy ! Component: 150 - total flux cleaned = 0.0108468 Jy ! Component: 200 - total flux cleaned = 0.0110744 Jy ! Total flux subtracted in 200 components = 0.0110744 Jy ! Clean residual min=-0.005622 max=0.006399 Jy/beam ! Clean residual mean=0.000001 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.180273 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.4669e-05 Jy ! Component: 100 - total flux cleaned = -0.000179239 Jy ! Component: 150 - total flux cleaned = -0.000325044 Jy ! Component: 200 - total flux cleaned = -0.000389065 Jy ! Total flux subtracted in 200 components = -0.000389065 Jy ! Clean residual min=-0.005476 max=0.005904 Jy/beam ! Clean residual mean=0.000001 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.179884 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 0.179884 Jy ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! Estimated beam: bmin=0.9265 mas, bmaj=2.015 mas, bpa=10.94 degrees ! Estimated noise=322.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164056 Jy ! Component: 100 - total flux cleaned = 0.00156046 Jy ! Component: 150 - total flux cleaned = 0.00131414 Jy ! Component: 200 - total flux cleaned = 0.00138236 Jy ! Total flux subtracted in 200 components = 0.00138236 Jy ! Clean residual min=-0.002748 max=0.002684 Jy/beam ! Clean residual mean=0.000000 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.181267 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.181267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136648Jy sigma=0.000755 ! Fit after self-cal, rms=0.136520Jy sigma=0.000754 wmodel J1424+225C_X_2017_07_16_pus_map.mod ! Writing 96 model components to file: J1424+225C_X_2017_07_16_pus_map.mod wobs J1424+225C_X_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1424+225C_X_2017_07_16_pus_uvs.fits wwins J1424+225C_X_2017_07_16_pus_map.win ! wwins: Wrote 6 windows to J1424+225C_X_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137827 Jy ! Component: 100 - total flux cleaned = 0.000164185 Jy ! Component: 150 - total flux cleaned = 0.000621365 Jy ! Component: 200 - total flux cleaned = 0.0011044 Jy ! Component: 250 - total flux cleaned = 0.00165435 Jy ! Component: 300 - total flux cleaned = 0.00222973 Jy ! Component: 350 - total flux cleaned = 0.00256794 Jy ! Component: 400 - total flux cleaned = 0.00289993 Jy ! Component: 450 - total flux cleaned = 0.00315364 Jy ! Component: 500 - total flux cleaned = 0.00333193 Jy ! Component: 550 - total flux cleaned = 0.00350741 Jy ! Component: 600 - total flux cleaned = 0.00364582 Jy ! Component: 650 - total flux cleaned = 0.00368082 Jy ! Component: 700 - total flux cleaned = 0.0038836 Jy ! Component: 750 - total flux cleaned = 0.00401664 Jy ! Component: 800 - total flux cleaned = 0.00418088 Jy ! Component: 850 - total flux cleaned = 0.00424605 Jy ! Component: 900 - total flux cleaned = 0.00431043 Jy ! Component: 950 - total flux cleaned = 0.00450208 Jy ! Component: 1000 - total flux cleaned = 0.00465963 Jy ! Component: 1050 - total flux cleaned = 0.00475309 Jy ! Component: 1100 - total flux cleaned = 0.00490753 Jy ! Component: 1150 - total flux cleaned = 0.00499942 Jy ! Component: 1200 - total flux cleaned = 0.00508993 Jy ! Component: 1250 - total flux cleaned = 0.00520987 Jy ! Component: 1300 - total flux cleaned = 0.00518058 Jy ! Component: 1350 - total flux cleaned = 0.00538667 Jy ! Component: 1400 - total flux cleaned = 0.0053577 Jy ! Component: 1450 - total flux cleaned = 0.00544485 Jy ! Component: 1500 - total flux cleaned = 0.00544517 Jy ! Component: 1550 - total flux cleaned = 0.00550212 Jy ! Component: 1600 - total flux cleaned = 0.00555854 Jy ! Component: 1650 - total flux cleaned = 0.00550249 Jy ! Component: 1700 - total flux cleaned = 0.00550276 Jy ! Component: 1750 - total flux cleaned = 0.00558587 Jy ! Component: 1800 - total flux cleaned = 0.00555836 Jy ! Component: 1850 - total flux cleaned = 0.00558534 Jy ! Component: 1900 - total flux cleaned = 0.00555817 Jy ! Component: 1950 - total flux cleaned = 0.00558502 Jy ! Component: 2000 - total flux cleaned = 0.00550514 Jy ! Component: 2050 - total flux cleaned = 0.0056114 Jy ! Component: 2100 - total flux cleaned = 0.00558481 Jy ! Component: 2150 - total flux cleaned = 0.00563723 Jy ! Component: 2200 - total flux cleaned = 0.00568953 Jy ! Component: 2250 - total flux cleaned = 0.0055082 Jy ! Component: 2300 - total flux cleaned = 0.00566236 Jy ! Component: 2350 - total flux cleaned = 0.00568813 Jy ! Component: 2400 - total flux cleaned = 0.00566288 Jy ! Component: 2450 - total flux cleaned = 0.00576356 Jy ! Component: 2500 - total flux cleaned = 0.00571326 Jy ! Component: 2550 - total flux cleaned = 0.00573823 Jy ! Component: 2600 - total flux cleaned = 0.0058126 Jy ! Component: 2650 - total flux cleaned = 0.00573828 Jy ! Component: 2700 - total flux cleaned = 0.00563972 Jy ! Component: 2750 - total flux cleaned = 0.00573765 Jy ! Component: 2800 - total flux cleaned = 0.005762 Jy ! Component: 2850 - total flux cleaned = 0.00581066 Jy ! Component: 2900 - total flux cleaned = 0.00581058 Jy ! Component: 2950 - total flux cleaned = 0.00588255 Jy ! Component: 3000 - total flux cleaned = 0.00585864 Jy ! Component: 3050 - total flux cleaned = 0.00588256 Jy ! Component: 3100 - total flux cleaned = 0.00588274 Jy ! Component: 3150 - total flux cleaned = 0.00585916 Jy ! Component: 3200 - total flux cleaned = 0.00597641 Jy ! Component: 3250 - total flux cleaned = 0.00599973 Jy ! Component: 3300 - total flux cleaned = 0.00593002 Jy ! Component: 3350 - total flux cleaned = 0.00606863 Jy ! Component: 3400 - total flux cleaned = 0.00609169 Jy ! Component: 3450 - total flux cleaned = 0.00609168 Jy ! Component: 3500 - total flux cleaned = 0.00609153 Jy ! Component: 3550 - total flux cleaned = 0.00604613 Jy ! Component: 3600 - total flux cleaned = 0.00606886 Jy ! Component: 3650 - total flux cleaned = 0.0060013 Jy ! Component: 3700 - total flux cleaned = 0.00609102 Jy ! Component: 3750 - total flux cleaned = 0.00604636 Jy ! Component: 3800 - total flux cleaned = 0.00602416 Jy ! Component: 3850 - total flux cleaned = 0.00611281 Jy ! Component: 3900 - total flux cleaned = 0.0061349 Jy ! Component: 3950 - total flux cleaned = 0.00611282 Jy ! Component: 4000 - total flux cleaned = 0.00609093 Jy ! Component: 4050 - total flux cleaned = 0.00600376 Jy ! Component: 4100 - total flux cleaned = 0.00609065 Jy ! Component: 4150 - total flux cleaned = 0.006134 Jy ! Component: 4200 - total flux cleaned = 0.00606927 Jy ! Component: 4250 - total flux cleaned = 0.00613361 Jy ! Component: 4300 - total flux cleaned = 0.00611226 Jy ! Component: 4350 - total flux cleaned = 0.00613361 Jy ! Component: 4400 - total flux cleaned = 0.00617607 Jy ! Component: 4450 - total flux cleaned = 0.00623939 Jy ! Component: 4500 - total flux cleaned = 0.00626045 Jy ! Component: 4550 - total flux cleaned = 0.00621858 Jy ! Component: 4600 - total flux cleaned = 0.00617665 Jy ! Component: 4650 - total flux cleaned = 0.0062807 Jy ! Component: 4700 - total flux cleaned = 0.00625986 Jy ! Component: 4750 - total flux cleaned = 0.00634251 Jy ! Component: 4800 - total flux cleaned = 0.00632188 Jy ! Component: 4850 - total flux cleaned = 0.00623978 Jy ! Component: 4900 - total flux cleaned = 0.0063828 Jy ! Component: 4950 - total flux cleaned = 0.00636252 Jy ! Component: 5000 - total flux cleaned = 0.00638287 Jy ! Component: 5050 - total flux cleaned = 0.00638277 Jy ! Component: 5100 - total flux cleaned = 0.00642308 Jy ! Component: 5150 - total flux cleaned = 0.00652348 Jy ! Component: 5200 - total flux cleaned = 0.00644348 Jy ! Component: 5250 - total flux cleaned = 0.00642343 Jy ! Component: 5300 - total flux cleaned = 0.00650306 Jy ! Component: 5350 - total flux cleaned = 0.00650306 Jy ! Component: 5400 - total flux cleaned = 0.00658213 Jy ! Component: 5450 - total flux cleaned = 0.00650324 Jy ! Component: 5500 - total flux cleaned = 0.00652289 Jy ! Component: 5550 - total flux cleaned = 0.00667952 Jy ! Component: 5600 - total flux cleaned = 0.00664043 Jy ! Component: 5650 - total flux cleaned = 0.00669873 Jy ! Component: 5700 - total flux cleaned = 0.00669874 Jy ! Component: 5750 - total flux cleaned = 0.00679543 Jy ! Component: 5800 - total flux cleaned = 0.00679543 Jy ! Component: 5850 - total flux cleaned = 0.00685293 Jy ! Component: 5900 - total flux cleaned = 0.00689124 Jy ! Component: 5950 - total flux cleaned = 0.00679586 Jy ! Component: 6000 - total flux cleaned = 0.00685302 Jy ! Component: 6050 - total flux cleaned = 0.00687202 Jy ! Component: 6100 - total flux cleaned = 0.00694771 Jy ! Component: 6150 - total flux cleaned = 0.00698554 Jy ! Component: 6200 - total flux cleaned = 0.00700441 Jy ! Component: 6250 - total flux cleaned = 0.00706056 Jy ! Component: 6300 - total flux cleaned = 0.00709786 Jy ! Component: 6350 - total flux cleaned = 0.00717255 Jy ! Component: 6400 - total flux cleaned = 0.00719123 Jy ! Component: 6450 - total flux cleaned = 0.00719131 Jy ! Component: 6500 - total flux cleaned = 0.00720976 Jy ! Component: 6550 - total flux cleaned = 0.00722811 Jy ! Component: 6600 - total flux cleaned = 0.00732014 Jy ! Component: 6650 - total flux cleaned = 0.00739348 Jy ! Component: 6700 - total flux cleaned = 0.00732019 Jy ! Component: 6750 - total flux cleaned = 0.00735671 Jy ! Component: 6800 - total flux cleaned = 0.00728402 Jy ! Component: 6850 - total flux cleaned = 0.00739288 Jy ! Component: 6900 - total flux cleaned = 0.00739284 Jy ! Component: 6950 - total flux cleaned = 0.00748299 Jy ! Component: 7000 - total flux cleaned = 0.00735699 Jy ! Component: 7050 - total flux cleaned = 0.00742883 Jy ! Component: 7100 - total flux cleaned = 0.0075183 Jy ! Component: 7150 - total flux cleaned = 0.00751822 Jy ! Component: 7200 - total flux cleaned = 0.00767862 Jy ! Component: 7250 - total flux cleaned = 0.00767856 Jy ! Component: 7300 - total flux cleaned = 0.00771401 Jy ! Component: 7350 - total flux cleaned = 0.00776705 Jy ! Component: 7400 - total flux cleaned = 0.00778469 Jy ! Component: 7450 - total flux cleaned = 0.00780221 Jy ! Component: 7500 - total flux cleaned = 0.00785497 Jy ! Component: 7550 - total flux cleaned = 0.0078199 Jy ! Component: 7600 - total flux cleaned = 0.00797728 Jy ! Component: 7650 - total flux cleaned = 0.00801218 Jy ! Component: 7700 - total flux cleaned = 0.00809907 Jy ! Component: 7750 - total flux cleaned = 0.00804706 Jy ! Component: 7800 - total flux cleaned = 0.00809901 Jy ! Component: 7850 - total flux cleaned = 0.00803002 Jy ! Component: 7900 - total flux cleaned = 0.00808171 Jy ! Component: 7950 - total flux cleaned = 0.00813332 Jy ! Component: 8000 - total flux cleaned = 0.00827058 Jy ! Component: 8050 - total flux cleaned = 0.00835612 Jy ! Component: 8100 - total flux cleaned = 0.00833899 Jy ! Component: 8150 - total flux cleaned = 0.0083901 Jy ! Total flux subtracted in 8192 components = 0.00840712 Jy ! Clean residual min=-0.001162 max=0.001128 Jy/beam ! Clean residual mean=0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.189674 Jy keep ! Adding 787 model components to the UV plane model. ! The established model now contains 883 components and 0.189674 Jy ![Exited script file: muppet] wmap "J1424+225C_X_2017_07_16_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.015 at 10.94 degrees (North through East) ! Clean map min=-0.0033673 max=0.069626 Jy/beam ! Writing clean map to FITS file: J1424+225C_X_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0696256 invert ! Inverting map ! Your choice of large map pixels excluded 2.26% of the data. ! The x-axis pixel size should ideally be below 0.2071 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14739 1.14739 2.29479 4.58958 9.17916 18.3583 36.7166 73.4333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.015 at 10.94 degrees (North through East) ! Clean map min=-0.0033673 max=0.069626 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1424+225C_X_2017_07_16_pus_uvs.log closed on Thu May 9 14:06:39 2019