! Started logfile: J1422+0414_S_2017_08_12_pus_uvs.log on Fri May 10 15:00:52 2019 obs J1422+0414_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1422+0414_S_2017_08_12_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.753589 visibilities/baseline/integration-bin. ! Found source: J1422+0414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 15328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1422+0414_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955201Jy sigma=0.008495 ! Fit after self-cal, rms=0.939545Jy sigma=0.008375 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=7.719 mas, bpa=-7.095 degrees ! Estimated noise=920.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494747 Jy ! Component: 100 - total flux cleaned = 0.0610096 Jy ! Total flux subtracted in 100 components = 0.0610096 Jy ! Clean residual min=-0.003045 max=0.004074 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.0610096 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0610096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077991Jy sigma=0.000659 ! Fit after self-cal, rms=0.077877Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.635 mas, bpa=-6.393 degrees ! Estimated noise=738.067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379497 Jy ! Component: 100 - total flux cleaned = 0.00530031 Jy ! Component: 150 - total flux cleaned = 0.00549242 Jy ! Component: 200 - total flux cleaned = 0.00562234 Jy ! Total flux subtracted in 200 components = 0.00562234 Jy ! Clean residual min=-0.002446 max=0.002332 Jy/beam ! Clean residual mean=-0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.066632 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.066632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077702Jy sigma=0.000657 ! Fit after self-cal, rms=0.077704Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.99 KP 1.24 ! LA 1.03 MK 1.07 NL 0.88 OV 1.03 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.97 KP 1.02 ! LA 0.93 MK 0.99 NL 1.07 OV 1.12 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.98 KP 0.99 ! LA 1.01 MK 1.08 NL 1.00 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.85 KP 1.00* ! LA 1.00* MK 0.90 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.077704Jy sigma=0.000657 ! Fit after self-cal, rms=0.077502Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=8.661 mas, bpa=-6.523 degrees ! Estimated noise=736.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186571 Jy ! Component: 100 - total flux cleaned = -0.00022325 Jy ! Component: 150 - total flux cleaned = -0.00023412 Jy ! Component: 200 - total flux cleaned = -0.000243736 Jy ! Total flux subtracted in 200 components = -0.000243736 Jy ! Clean residual min=-0.002272 max=0.001975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0663882 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.0663882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077501Jy sigma=0.000655 ! Fit after self-cal, rms=0.077537Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077537Jy sigma=0.000654 ! Fit after self-cal, rms=0.080760Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=8.648 mas, bpa=-6.554 degrees ! Estimated noise=738.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77004e-05 Jy ! Component: 100 - total flux cleaned = -4.80589e-05 Jy ! Component: 150 - total flux cleaned = -2.78501e-05 Jy ! Component: 200 - total flux cleaned = -2.37088e-05 Jy ! Total flux subtracted in 200 components = -2.37088e-05 Jy ! Clean residual min=-0.001825 max=0.001651 Jy/beam ! Clean residual mean=0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0663645 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.0663645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080757Jy sigma=0.000652 ! Fit after self-cal, rms=0.080868Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.02368e-05 Jy ! Component: 100 - total flux cleaned = -4.95204e-05 Jy ! Component: 150 - total flux cleaned = -4.58259e-05 Jy ! Component: 200 - total flux cleaned = -3.93631e-05 Jy ! Total flux subtracted in 200 components = -3.93631e-05 Jy ! Clean residual min=-0.001835 max=0.001745 Jy/beam ! Clean residual mean=0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0663252 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0663252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080867Jy sigma=0.000652 ! Fit after self-cal, rms=0.080868Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080868Jy sigma=0.000652 ! Fit after self-cal, rms=0.082742Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.639 mas, bpa=-6.529 degrees ! Estimated noise=738.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.13798e-05 Jy ! Component: 100 - total flux cleaned = -6.59601e-05 Jy ! Component: 150 - total flux cleaned = -6.22948e-05 Jy ! Component: 200 - total flux cleaned = -6.21861e-05 Jy ! Total flux subtracted in 200 components = -6.21861e-05 Jy ! Clean residual min=-0.001745 max=0.001658 Jy/beam ! Clean residual mean=0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.066263 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.066263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082741Jy sigma=0.000652 ! Fit after self-cal, rms=0.082763Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21584e-05 Jy ! Component: 100 - total flux cleaned = -1.78695e-05 Jy ! Component: 150 - total flux cleaned = -1.02957e-05 Jy ! Component: 200 - total flux cleaned = -1.39618e-05 Jy ! Total flux subtracted in 200 components = -1.39618e-05 Jy ! Clean residual min=-0.001729 max=0.001670 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.066249 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.066249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082762Jy sigma=0.000652 ! Fit after self-cal, rms=0.082766Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082766Jy sigma=0.000652 ! Fit after self-cal, rms=0.082950Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=14.62 mas, bpa=-10.8 degrees ! Estimated noise=940.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146454 Jy ! Component: 100 - total flux cleaned = -0.00013818 Jy ! Component: 150 - total flux cleaned = -0.000138483 Jy ! Component: 200 - total flux cleaned = -0.000138583 Jy ! Total flux subtracted in 200 components = -0.000138583 Jy ! Clean residual min=-0.001804 max=0.001958 Jy/beam ! Clean residual mean=0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0661104 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.0661104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082951Jy sigma=0.000652 ! Fit after self-cal, rms=0.082951Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74386e-05 Jy ! Component: 100 - total flux cleaned = -2.52101e-05 Jy ! Component: 150 - total flux cleaned = -2.43208e-05 Jy ! Component: 200 - total flux cleaned = -1.87118e-05 Jy ! Total flux subtracted in 200 components = -1.87118e-05 Jy ! Clean residual min=-0.001797 max=0.001953 Jy/beam ! Clean residual mean=0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0660917 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.0660917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082952Jy sigma=0.000652 ! Fit after self-cal, rms=0.082949Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.635 mas, bpa=-6.519 degrees ! Estimated noise=737.851 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.635 at -6.519 degrees (North through East) ! Clean map min=-0.0016573 max=0.063285 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.749 mas, bpa=-7.351 degrees ! Estimated noise=918.536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490694 Jy ! Component: 100 - total flux cleaned = 0.0604239 Jy ! Component: 150 - total flux cleaned = 0.064188 Jy ! Component: 200 - total flux cleaned = 0.0651281 Jy ! Total flux subtracted in 200 components = 0.0651281 Jy ! Clean residual min=-0.002319 max=0.002100 Jy/beam ! Clean residual mean=0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0651281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0651281 Jy ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.635 mas, bpa=-6.519 degrees ! Estimated noise=737.851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410473 Jy ! Component: 100 - total flux cleaned = 0.000630338 Jy ! Component: 150 - total flux cleaned = 0.000798442 Jy ! Component: 200 - total flux cleaned = 0.000920803 Jy ! Total flux subtracted in 200 components = 0.000920803 Jy ! Clean residual min=-0.001736 max=0.001638 Jy/beam ! Clean residual mean=0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0660489 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.0660489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=14.62 mas, bpa=-10.8 degrees ! Estimated noise=940.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154023 Jy ! Component: 100 - total flux cleaned = 0.000140294 Jy ! Component: 150 - total flux cleaned = 0.000128624 Jy ! Component: 200 - total flux cleaned = 0.000119483 Jy ! Total flux subtracted in 200 components = 0.000119483 Jy ! Clean residual min=-0.001827 max=0.001943 Jy/beam ! Clean residual mean=0.000003 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0661684 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.13253e-09 Jy ! Component: 100 - total flux cleaned = -7.17431e-06 Jy ! Component: 150 - total flux cleaned = -7.16307e-06 Jy ! Component: 200 - total flux cleaned = -1.24034e-05 Jy ! Total flux subtracted in 200 components = -1.24034e-05 Jy ! Clean residual min=-0.001799 max=0.001948 Jy/beam ! Clean residual mean=0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.066156 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.066156 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.635 mas, bpa=-6.519 degrees ! Estimated noise=737.851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119286 Jy ! Component: 100 - total flux cleaned = 0.000121342 Jy ! Component: 150 - total flux cleaned = 0.000121316 Jy ! Component: 200 - total flux cleaned = 0.000121226 Jy ! Total flux subtracted in 200 components = 0.000121226 Jy ! Clean residual min=-0.001737 max=0.001641 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0662772 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.0662772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082948Jy sigma=0.000652 ! Fit after self-cal, rms=0.082949Jy sigma=0.000652 wmodel J1422+0414_S_2017_08_12_pus_map.mod ! Writing 63 model components to file: J1422+0414_S_2017_08_12_pus_map.mod wobs J1422+0414_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1422+0414_S_2017_08_12_pus_uvs.fits wwins J1422+0414_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1422+0414_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000422921 Jy ! Component: 100 - total flux cleaned = -0.000596206 Jy ! Component: 150 - total flux cleaned = -0.000704626 Jy ! Component: 200 - total flux cleaned = -0.00086174 Jy ! Component: 250 - total flux cleaned = -0.00103957 Jy ! Component: 300 - total flux cleaned = -0.00116211 Jy ! Component: 350 - total flux cleaned = -0.00123365 Jy ! Component: 400 - total flux cleaned = -0.00130423 Jy ! Component: 450 - total flux cleaned = -0.00139559 Jy ! Component: 500 - total flux cleaned = -0.00144049 Jy ! Component: 550 - total flux cleaned = -0.00146276 Jy ! Component: 600 - total flux cleaned = -0.0015489 Jy ! Component: 650 - total flux cleaned = -0.00161224 Jy ! Component: 700 - total flux cleaned = -0.00167414 Jy ! Component: 750 - total flux cleaned = -0.00171494 Jy ! Component: 800 - total flux cleaned = -0.00181479 Jy ! Component: 850 - total flux cleaned = -0.00189337 Jy ! Component: 900 - total flux cleaned = -0.0018933 Jy ! Component: 950 - total flux cleaned = -0.00189347 Jy ! Component: 1000 - total flux cleaned = -0.00193116 Jy ! Component: 1050 - total flux cleaned = -0.00194941 Jy ! Component: 1100 - total flux cleaned = -0.00194912 Jy ! Component: 1150 - total flux cleaned = -0.00196659 Jy ! Component: 1200 - total flux cleaned = -0.00198424 Jy ! Component: 1250 - total flux cleaned = -0.00205437 Jy ! Component: 1300 - total flux cleaned = -0.00212342 Jy ! Component: 1350 - total flux cleaned = -0.00215748 Jy ! Component: 1400 - total flux cleaned = -0.00220789 Jy ! Component: 1450 - total flux cleaned = -0.0022912 Jy ! Component: 1500 - total flux cleaned = -0.00235687 Jy ! Component: 1550 - total flux cleaned = -0.00237307 Jy ! Component: 1600 - total flux cleaned = -0.0024214 Jy ! Component: 1650 - total flux cleaned = -0.00245329 Jy ! Component: 1700 - total flux cleaned = -0.00245326 Jy ! Component: 1750 - total flux cleaned = -0.00250032 Jy ! Component: 1800 - total flux cleaned = -0.00254658 Jy ! Component: 1850 - total flux cleaned = -0.00259242 Jy ! Component: 1900 - total flux cleaned = -0.00257719 Jy ! Component: 1950 - total flux cleaned = -0.00257725 Jy ! Component: 2000 - total flux cleaned = -0.00259206 Jy ! Component: 2050 - total flux cleaned = -0.00262137 Jy ! Component: 2100 - total flux cleaned = -0.00262128 Jy ! Component: 2150 - total flux cleaned = -0.00263566 Jy ! Component: 2200 - total flux cleaned = -0.00270718 Jy ! Component: 2250 - total flux cleaned = -0.00263607 Jy ! Component: 2300 - total flux cleaned = -0.00266433 Jy ! Component: 2350 - total flux cleaned = -0.00274797 Jy ! Component: 2400 - total flux cleaned = -0.00272017 Jy ! Component: 2450 - total flux cleaned = -0.00270647 Jy ! Component: 2500 - total flux cleaned = -0.0027609 Jy ! Component: 2550 - total flux cleaned = -0.00277419 Jy ! Component: 2600 - total flux cleaned = -0.00273397 Jy ! Component: 2650 - total flux cleaned = -0.00273399 Jy ! Component: 2700 - total flux cleaned = -0.00277326 Jy ! Component: 2750 - total flux cleaned = -0.00276032 Jy ! Component: 2800 - total flux cleaned = -0.00278606 Jy ! Component: 2850 - total flux cleaned = -0.00278621 Jy ! Component: 2900 - total flux cleaned = -0.00277345 Jy ! Component: 2950 - total flux cleaned = -0.00274825 Jy ! Component: 3000 - total flux cleaned = -0.00276082 Jy ! Component: 3050 - total flux cleaned = -0.00272348 Jy ! Component: 3100 - total flux cleaned = -0.00269891 Jy ! Component: 3150 - total flux cleaned = -0.00269891 Jy ! Component: 3200 - total flux cleaned = -0.00271111 Jy ! Component: 3250 - total flux cleaned = -0.00267495 Jy ! Component: 3300 - total flux cleaned = -0.00266295 Jy ! Component: 3350 - total flux cleaned = -0.00265105 Jy ! Component: 3400 - total flux cleaned = -0.00261552 Jy ! Component: 3450 - total flux cleaned = -0.00258044 Jy ! Component: 3500 - total flux cleaned = -0.00258041 Jy ! Component: 3550 - total flux cleaned = -0.00255724 Jy ! Component: 3600 - total flux cleaned = -0.00248843 Jy ! Component: 3650 - total flux cleaned = -0.00247721 Jy ! Component: 3700 - total flux cleaned = -0.00244321 Jy ! Component: 3750 - total flux cleaned = -0.00245442 Jy ! Component: 3800 - total flux cleaned = -0.00240971 Jy ! Component: 3850 - total flux cleaned = -0.00237641 Jy ! Component: 3900 - total flux cleaned = -0.00237645 Jy ! Component: 3950 - total flux cleaned = -0.00236547 Jy ! Component: 4000 - total flux cleaned = -0.00231091 Jy ! Component: 4050 - total flux cleaned = -0.00224615 Jy ! Total flux subtracted in 4096 components = -0.00226757 Jy ! Clean residual min=-0.000653 max=0.000573 Jy/beam ! Clean residual mean=0.000002 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0640097 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 348 components and 0.0640097 Jy ![Exited script file: muppet] wmap "J1422+0414_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.635 at -6.519 degrees (North through East) ! Clean map min=-0.001473 max=0.062943 Jy/beam ! Writing clean map to FITS file: J1422+0414_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0629432 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193195 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.920804 0.920804 1.84161 3.68322 7.36643 14.7329 29.4657 58.9315 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.635 at -6.519 degrees (North through East) ! Clean map min=-0.001473 max=0.062943 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1422+0414_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:00:56 2019