! Started logfile: J1421-2001_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:48 2019 obs J1421-2001_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1421-2001_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.8457 visibilities/baseline/integration-bin. ! Found source: J1421-2001 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 17780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1421-2001_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 809 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005396Jy sigma=0.008183 ! Fit after self-cal, rms=0.949501Jy sigma=0.007740 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=16.34 mas, bpa=-16.2 degrees ! Estimated noise=1396.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422563 Jy ! Component: 100 - total flux cleaned = 0.0518651 Jy ! Total flux subtracted in 100 components = 0.0518651 Jy ! Clean residual min=-0.004261 max=0.004559 Jy/beam ! Clean residual mean=-0.000017 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.0518651 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0518651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096156Jy sigma=0.000701 ! Fit after self-cal, rms=0.094592Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=18.39 mas, bpa=-16.94 degrees ! Estimated noise=810.714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552005 Jy ! Component: 100 - total flux cleaned = 0.00791381 Jy ! Component: 150 - total flux cleaned = 0.00929639 Jy ! Component: 200 - total flux cleaned = 0.00997139 Jy ! Total flux subtracted in 200 components = 0.00997139 Jy ! Clean residual min=-0.003382 max=0.003953 Jy/beam ! Clean residual mean=-0.000025 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.0618365 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 35 components and 0.0618365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094223Jy sigma=0.000686 ! Fit after self-cal, rms=0.094173Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.04 HN 0.98 KP 1.18 ! LA 1.03 MK 1.08 NL 0.94 OV 1.10 ! PT 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.06 KP 1.18 ! LA 1.08 MK 1.03 NL 1.03 OV 1.10 ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.95 KP 1.14 ! LA 0.83 MK 1.05 NL 1.17 OV 1.02 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.81 KP 1.00* ! LA 0.80 MK 0.87 NL 1.00* OV 1.00* ! PT 0.70 ! ! ! Fit before self-cal, rms=0.094173Jy sigma=0.000686 ! Fit after self-cal, rms=0.090841Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=18.24 mas, bpa=-16.8 degrees ! Estimated noise=815.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.17027e-05 Jy ! Component: 100 - total flux cleaned = 4.97616e-05 Jy ! Component: 150 - total flux cleaned = 6.50117e-05 Jy ! Component: 200 - total flux cleaned = 6.48135e-05 Jy ! Total flux subtracted in 200 components = 6.48135e-05 Jy ! Clean residual min=-0.002116 max=0.002007 Jy/beam ! Clean residual mean=0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0619013 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.0619013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090834Jy sigma=0.000681 ! Fit after self-cal, rms=0.091111Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091111Jy sigma=0.000680 ! Fit after self-cal, rms=0.092672Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=18.26 mas, bpa=-16.83 degrees ! Estimated noise=819.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001459 Jy ! Component: 100 - total flux cleaned = 0.000188907 Jy ! Component: 150 - total flux cleaned = 0.000173229 Jy ! Component: 200 - total flux cleaned = 0.000159383 Jy ! Total flux subtracted in 200 components = 0.000159383 Jy ! Clean residual min=-0.002197 max=0.001988 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0620607 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0620607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092663Jy sigma=0.000678 ! Fit after self-cal, rms=0.093008Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412905 Jy ! Component: 100 - total flux cleaned = 0.000487393 Jy ! Component: 150 - total flux cleaned = 0.000537906 Jy ! Component: 200 - total flux cleaned = 0.000585101 Jy ! Total flux subtracted in 200 components = 0.000585101 Jy ! Clean residual min=-0.002137 max=0.002187 Jy/beam ! Clean residual mean=-0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0626458 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.0626458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093000Jy sigma=0.000678 ! Fit after self-cal, rms=0.093010Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093010Jy sigma=0.000678 ! Fit after self-cal, rms=0.094743Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=18.28 mas, bpa=-16.89 degrees ! Estimated noise=821.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.54155e-05 Jy ! Component: 100 - total flux cleaned = -3.59253e-05 Jy ! Component: 150 - total flux cleaned = -5.1876e-05 Jy ! Component: 200 - total flux cleaned = -8.16138e-05 Jy ! Total flux subtracted in 200 components = -8.16138e-05 Jy ! Clean residual min=-0.002167 max=0.002001 Jy/beam ! Clean residual mean=-0.000004 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0625642 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.0625642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094733Jy sigma=0.000677 ! Fit after self-cal, rms=0.095010Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.96782e-05 Jy ! Component: 100 - total flux cleaned = 6.13604e-05 Jy ! Component: 150 - total flux cleaned = 9.15636e-05 Jy ! Component: 200 - total flux cleaned = 0.000119868 Jy ! Total flux subtracted in 200 components = 0.000119868 Jy ! Clean residual min=-0.002250 max=0.002057 Jy/beam ! Clean residual mean=-0.000005 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.062684 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.062684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095004Jy sigma=0.000677 ! Fit after self-cal, rms=0.095015Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095015Jy sigma=0.000677 ! Fit after self-cal, rms=0.096300Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.674 mas, bmaj=25.16 mas, bpa=-4.628 degrees ! Estimated noise=969.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76684e-06 Jy ! Component: 100 - total flux cleaned = 1.74838e-05 Jy ! Component: 150 - total flux cleaned = 3.43789e-05 Jy ! Component: 200 - total flux cleaned = 3.44082e-05 Jy ! Total flux subtracted in 200 components = 3.44082e-05 Jy ! Clean residual min=-0.002244 max=0.002260 Jy/beam ! Clean residual mean=-0.000006 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0627184 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.0627184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096297Jy sigma=0.000677 ! Fit after self-cal, rms=0.096498Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.79101e-05 Jy ! Component: 100 - total flux cleaned = 0.000119229 Jy ! Component: 150 - total flux cleaned = 0.0001282 Jy ! Component: 200 - total flux cleaned = 0.000152562 Jy ! Total flux subtracted in 200 components = 0.000152562 Jy ! Clean residual min=-0.002342 max=0.002213 Jy/beam ! Clean residual mean=-0.000007 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.062871 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 103 components and 0.062871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096495Jy sigma=0.000677 ! Fit after self-cal, rms=0.096509Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=18.3 mas, bpa=-16.95 degrees ! Estimated noise=822.227 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 18.3 at -16.95 degrees (North through East) ! Clean map min=-0.0021139 max=0.053231 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=16.06 mas, bpa=-15.98 degrees ! Estimated noise=1391.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420746 Jy ! Component: 100 - total flux cleaned = 0.0524907 Jy ! Component: 150 - total flux cleaned = 0.0575781 Jy ! Component: 200 - total flux cleaned = 0.0605748 Jy ! Total flux subtracted in 200 components = 0.0605748 Jy ! Clean residual min=-0.003332 max=0.003281 Jy/beam ! Clean residual mean=-0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.0605748 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0605748 Jy ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=18.3 mas, bpa=-16.95 degrees ! Estimated noise=822.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155732 Jy ! Component: 100 - total flux cleaned = 0.00193707 Jy ! Component: 150 - total flux cleaned = 0.00215586 Jy ! Component: 200 - total flux cleaned = 0.00224526 Jy ! Total flux subtracted in 200 components = 0.00224526 Jy ! Clean residual min=-0.002108 max=0.002032 Jy/beam ! Clean residual mean=-0.000005 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0628201 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.0628201 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.674 mas, bmaj=25.16 mas, bpa=-4.628 degrees ! Estimated noise=969.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145932 Jy ! Component: 100 - total flux cleaned = -5.48865e-05 Jy ! Component: 150 - total flux cleaned = 1.84691e-05 Jy ! Component: 200 - total flux cleaned = 4.98444e-05 Jy ! Total flux subtracted in 200 components = 4.98444e-05 Jy ! Clean residual min=-0.002356 max=0.002205 Jy/beam ! Clean residual mean=-0.000008 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0628699 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82448e-05 Jy ! Component: 100 - total flux cleaned = 3.71857e-05 Jy ! Component: 150 - total flux cleaned = 5.40837e-05 Jy ! Component: 200 - total flux cleaned = 6.25608e-05 Jy ! Total flux subtracted in 200 components = 6.25608e-05 Jy ! Clean residual min=-0.002348 max=0.002214 Jy/beam ! Clean residual mean=-0.000007 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.0629325 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.0629325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=18.3 mas, bpa=-16.95 degrees ! Estimated noise=822.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102425 Jy ! Component: 100 - total flux cleaned = -8.03386e-05 Jy ! Component: 150 - total flux cleaned = -7.99271e-05 Jy ! Component: 200 - total flux cleaned = -6.08094e-05 Jy ! Total flux subtracted in 200 components = -6.08094e-05 Jy ! Clean residual min=-0.002122 max=0.002022 Jy/beam ! Clean residual mean=-0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0628717 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0628716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096518Jy sigma=0.000677 ! Fit after self-cal, rms=0.096538Jy sigma=0.000677 wmodel J1421-2001_S_2017_10_21_pus_map.mod ! Writing 62 model components to file: J1421-2001_S_2017_10_21_pus_map.mod wobs J1421-2001_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1421-2001_S_2017_10_21_pus_uvs.fits wwins J1421-2001_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1421-2001_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434969 Jy ! Component: 100 - total flux cleaned = -0.000810472 Jy ! Component: 150 - total flux cleaned = -0.00103331 Jy ! Component: 200 - total flux cleaned = -0.00109444 Jy ! Component: 250 - total flux cleaned = -0.00112315 Jy ! Component: 300 - total flux cleaned = -0.00112303 Jy ! Component: 350 - total flux cleaned = -0.00115029 Jy ! Component: 400 - total flux cleaned = -0.001124 Jy ! Component: 450 - total flux cleaned = -0.00112439 Jy ! Component: 500 - total flux cleaned = -0.00112456 Jy ! Component: 550 - total flux cleaned = -0.00107536 Jy ! Component: 600 - total flux cleaned = -0.00107607 Jy ! Component: 650 - total flux cleaned = -0.00102895 Jy ! Component: 700 - total flux cleaned = -0.000959804 Jy ! Component: 750 - total flux cleaned = -0.000936899 Jy ! Component: 800 - total flux cleaned = -0.000871208 Jy ! Component: 850 - total flux cleaned = -0.00089236 Jy ! Component: 900 - total flux cleaned = -0.000913178 Jy ! Component: 950 - total flux cleaned = -0.000995268 Jy ! Component: 1000 - total flux cleaned = -0.00105553 Jy ! Component: 1050 - total flux cleaned = -0.00109493 Jy ! Component: 1100 - total flux cleaned = -0.0011534 Jy ! Component: 1150 - total flux cleaned = -0.00119128 Jy ! Component: 1200 - total flux cleaned = -0.00119159 Jy ! Component: 1250 - total flux cleaned = -0.0012841 Jy ! Component: 1300 - total flux cleaned = -0.00132027 Jy ! Component: 1350 - total flux cleaned = -0.00132016 Jy ! Component: 1400 - total flux cleaned = -0.00137283 Jy ! Component: 1450 - total flux cleaned = -0.00137288 Jy ! Component: 1500 - total flux cleaned = -0.00140695 Jy ! Component: 1550 - total flux cleaned = -0.00139024 Jy ! Component: 1600 - total flux cleaned = -0.00135733 Jy ! Component: 1650 - total flux cleaned = -0.00137356 Jy ! Component: 1700 - total flux cleaned = -0.00140531 Jy ! Component: 1750 - total flux cleaned = -0.00142068 Jy ! Component: 1800 - total flux cleaned = -0.00137371 Jy ! Component: 1850 - total flux cleaned = -0.00148162 Jy ! Component: 1900 - total flux cleaned = -0.00149669 Jy ! Component: 1950 - total flux cleaned = -0.00151181 Jy ! Component: 2000 - total flux cleaned = -0.00155645 Jy ! Component: 2050 - total flux cleaned = -0.00158583 Jy ! Component: 2100 - total flux cleaned = -0.00161493 Jy ! Component: 2150 - total flux cleaned = -0.0016579 Jy ! Component: 2200 - total flux cleaned = -0.00170059 Jy ! Component: 2250 - total flux cleaned = -0.00177069 Jy ! Component: 2300 - total flux cleaned = -0.00175688 Jy ! Component: 2350 - total flux cleaned = -0.00181179 Jy ! Component: 2400 - total flux cleaned = -0.00187974 Jy ! Component: 2450 - total flux cleaned = -0.00194723 Jy ! Component: 2500 - total flux cleaned = -0.00200056 Jy ! Component: 2550 - total flux cleaned = -0.00205324 Jy ! Component: 2600 - total flux cleaned = -0.00210539 Jy ! Component: 2650 - total flux cleaned = -0.00214415 Jy ! Component: 2700 - total flux cleaned = -0.00214431 Jy ! Component: 2750 - total flux cleaned = -0.00219527 Jy ! Component: 2800 - total flux cleaned = -0.00222043 Jy ! Component: 2850 - total flux cleaned = -0.00227035 Jy ! Component: 2900 - total flux cleaned = -0.00230733 Jy ! Component: 2950 - total flux cleaned = -0.00240494 Jy ! Component: 3000 - total flux cleaned = -0.00240469 Jy ! Component: 3050 - total flux cleaned = -0.00245269 Jy ! Component: 3100 - total flux cleaned = -0.00246438 Jy ! Component: 3150 - total flux cleaned = -0.00246432 Jy ! Component: 3200 - total flux cleaned = -0.00247596 Jy ! Component: 3250 - total flux cleaned = -0.0024526 Jy ! Component: 3300 - total flux cleaned = -0.0024526 Jy ! Component: 3350 - total flux cleaned = -0.00239552 Jy ! Component: 3400 - total flux cleaned = -0.00238423 Jy ! Component: 3450 - total flux cleaned = -0.00236165 Jy ! Component: 3500 - total flux cleaned = -0.0023728 Jy ! Component: 3550 - total flux cleaned = -0.00233928 Jy ! Component: 3600 - total flux cleaned = -0.00231708 Jy ! Component: 3650 - total flux cleaned = -0.00230613 Jy ! Component: 3700 - total flux cleaned = -0.00229527 Jy ! Component: 3750 - total flux cleaned = -0.00227366 Jy ! Component: 3800 - total flux cleaned = -0.00223066 Jy ! Component: 3850 - total flux cleaned = -0.00219857 Jy ! Component: 3900 - total flux cleaned = -0.0021561 Jy ! Component: 3950 - total flux cleaned = -0.00209286 Jy ! Component: 4000 - total flux cleaned = -0.00206148 Jy ! Component: 4050 - total flux cleaned = -0.00203028 Jy ! Total flux subtracted in 4096 components = -0.00201981 Jy ! Clean residual min=-0.000643 max=0.000691 Jy/beam ! Clean residual mean=-0.000002 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.0608518 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 296 components and 0.0608518 Jy ![Exited script file: muppet] wmap "J1421-2001_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 18.3 at -16.95 degrees (North through East) ! Clean map min=-0.001584 max=0.05319 Jy/beam ! Writing clean map to FITS file: J1421-2001_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0531903 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194329 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09604 1.09604 2.19208 4.38416 8.76832 17.5366 35.0733 70.1466 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 18.3 at -16.95 degrees (North through East) ! Clean map min=-0.001584 max=0.05319 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1421-2001_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:53 2019