! Started logfile: J1421-2001_S_2017_07_09_pus_uvs.log on Wed May 8 14:50:40 2019 obs J1421-2001_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1421-2001_S_2017_07_09_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975939 visibilities/baseline/integration-bin. ! Found source: J1421-2001 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1421-2001_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1049 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994048Jy sigma=0.007880 ! Fit after self-cal, rms=0.952230Jy sigma=0.007557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=7.115 mas, bpa=-9.354 degrees ! Estimated noise=1415.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397828 Jy ! Component: 100 - total flux cleaned = 0.0487665 Jy ! Total flux subtracted in 100 components = 0.0487665 Jy ! Clean residual min=-0.004170 max=0.004721 Jy/beam ! Clean residual mean=0.000002 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.0487665 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0487665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088140Jy sigma=0.000665 ! Fit after self-cal, rms=0.086920Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.106 mas, bpa=-7.795 degrees ! Estimated noise=702.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044436 Jy ! Component: 100 - total flux cleaned = 0.00592031 Jy ! Component: 150 - total flux cleaned = 0.00662587 Jy ! Component: 200 - total flux cleaned = 0.00680733 Jy ! Total flux subtracted in 200 components = 0.00680733 Jy ! Clean residual min=-0.001837 max=0.002188 Jy/beam ! Clean residual mean=-0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0555739 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.0555739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086700Jy sigma=0.000655 ! Fit after self-cal, rms=0.086676Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00 HN 1.01 KP 0.97 ! LA 1.05 MK 1.06 NL 0.99 OV 1.02 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.08 KP 1.01 ! LA 0.97 MK 1.07 NL 1.00 OV 1.07 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.98 KP 1.08 ! LA 0.93 MK 1.04 NL 0.97 OV 0.98 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.73 KP 1.00* ! LA 1.00* MK 0.83 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.086676Jy sigma=0.000654 ! Fit after self-cal, rms=0.085724Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=8.105 mas, bpa=-7.455 degrees ! Estimated noise=705.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121032 Jy ! Component: 100 - total flux cleaned = -0.000146957 Jy ! Component: 150 - total flux cleaned = -0.000147581 Jy ! Component: 200 - total flux cleaned = -0.000147722 Jy ! Total flux subtracted in 200 components = -0.000147722 Jy ! Clean residual min=-0.001953 max=0.001687 Jy/beam ! Clean residual mean=-0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0554261 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0554261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085721Jy sigma=0.000654 ! Fit after self-cal, rms=0.085677Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085677Jy sigma=0.000654 ! Fit after self-cal, rms=0.085582Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.104 mas, bpa=-7.307 degrees ! Estimated noise=704.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.47353e-05 Jy ! Component: 100 - total flux cleaned = -9.42531e-05 Jy ! Component: 150 - total flux cleaned = -8.52048e-05 Jy ! Component: 200 - total flux cleaned = -9.304e-05 Jy ! Total flux subtracted in 200 components = -9.304e-05 Jy ! Clean residual min=-0.001892 max=0.001706 Jy/beam ! Clean residual mean=-0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0553331 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0553331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085580Jy sigma=0.000654 ! Fit after self-cal, rms=0.085580Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.43864e-05 Jy ! Component: 100 - total flux cleaned = -1.01656e-05 Jy ! Component: 150 - total flux cleaned = -1.78283e-05 Jy ! Component: 200 - total flux cleaned = -2.51765e-05 Jy ! Total flux subtracted in 200 components = -2.51765e-05 Jy ! Clean residual min=-0.001884 max=0.001719 Jy/beam ! Clean residual mean=-0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0553079 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0553079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085579Jy sigma=0.000654 ! Fit after self-cal, rms=0.085571Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085571Jy sigma=0.000654 ! Fit after self-cal, rms=0.085996Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=8.123 mas, bpa=-7.118 degrees ! Estimated noise=704.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05399e-05 Jy ! Component: 100 - total flux cleaned = 3.56041e-05 Jy ! Component: 150 - total flux cleaned = 3.5999e-05 Jy ! Component: 200 - total flux cleaned = 4.2197e-05 Jy ! Total flux subtracted in 200 components = 4.2197e-05 Jy ! Clean residual min=-0.001925 max=0.001740 Jy/beam ! Clean residual mean=-0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0553501 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0553501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085994Jy sigma=0.000654 ! Fit after self-cal, rms=0.086017Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6682e-05 Jy ! Component: 100 - total flux cleaned = 4.72531e-05 Jy ! Component: 150 - total flux cleaned = 4.70763e-05 Jy ! Component: 200 - total flux cleaned = 4.17996e-05 Jy ! Total flux subtracted in 200 components = 4.17996e-05 Jy ! Clean residual min=-0.001869 max=0.001719 Jy/beam ! Clean residual mean=-0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0553919 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0553919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086016Jy sigma=0.000654 ! Fit after self-cal, rms=0.086016Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086016Jy sigma=0.000654 ! Fit after self-cal, rms=0.086301Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.32 mas, bmaj=16.56 mas, bpa=-6.192 degrees ! Estimated noise=921.588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028129 Jy ! Component: 100 - total flux cleaned = 0.000282493 Jy ! Component: 150 - total flux cleaned = 0.000274534 Jy ! Component: 200 - total flux cleaned = 0.000261308 Jy ! Total flux subtracted in 200 components = 0.000261308 Jy ! Clean residual min=-0.001844 max=0.002286 Jy/beam ! Clean residual mean=-0.000005 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0556532 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0556532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086303Jy sigma=0.000654 ! Fit after self-cal, rms=0.086313Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010373 Jy ! Component: 100 - total flux cleaned = 0.000104267 Jy ! Component: 150 - total flux cleaned = 9.72332e-05 Jy ! Component: 200 - total flux cleaned = 9.18941e-05 Jy ! Total flux subtracted in 200 components = 9.18941e-05 Jy ! Clean residual min=-0.001839 max=0.002302 Jy/beam ! Clean residual mean=-0.000005 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0557451 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.0557451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086315Jy sigma=0.000654 ! Fit after self-cal, rms=0.086317Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.131 mas, bpa=-7.099 degrees ! Estimated noise=704.682 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.131 at -7.099 degrees (North through East) ! Clean map min=-0.0017544 max=0.053262 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=7.132 mas, bpa=-9.263 degrees ! Estimated noise=1388.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411556 Jy ! Component: 100 - total flux cleaned = 0.0502941 Jy ! Component: 150 - total flux cleaned = 0.0535403 Jy ! Component: 200 - total flux cleaned = 0.0550843 Jy ! Total flux subtracted in 200 components = 0.0550843 Jy ! Clean residual min=-0.003546 max=0.003167 Jy/beam ! Clean residual mean=0.000001 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0550843 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0550843 Jy ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.131 mas, bpa=-7.099 degrees ! Estimated noise=704.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479831 Jy ! Component: 100 - total flux cleaned = 0.000437214 Jy ! Component: 150 - total flux cleaned = 0.000438287 Jy ! Component: 200 - total flux cleaned = 0.000438429 Jy ! Total flux subtracted in 200 components = 0.000438429 Jy ! Clean residual min=-0.001893 max=0.001709 Jy/beam ! Clean residual mean=-0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0555228 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0555228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.32 mas, bmaj=16.56 mas, bpa=-6.192 degrees ! Estimated noise=921.588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250184 Jy ! Component: 100 - total flux cleaned = 0.000232183 Jy ! Component: 150 - total flux cleaned = 0.000225652 Jy ! Component: 200 - total flux cleaned = 0.000225405 Jy ! Total flux subtracted in 200 components = 0.000225405 Jy ! Clean residual min=-0.001876 max=0.002301 Jy/beam ! Clean residual mean=-0.000005 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0557482 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36909e-06 Jy ! Component: 100 - total flux cleaned = 3.5728e-07 Jy ! Component: 150 - total flux cleaned = -8.02811e-09 Jy ! Component: 200 - total flux cleaned = -4.45425e-09 Jy ! Total flux subtracted in 200 components = -4.45425e-09 Jy ! Clean residual min=-0.001868 max=0.002305 Jy/beam ! Clean residual mean=-0.000005 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0557482 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0557482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.131 mas, bpa=-7.099 degrees ! Estimated noise=704.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208825 Jy ! Component: 100 - total flux cleaned = -0.000170172 Jy ! Component: 150 - total flux cleaned = -0.000160389 Jy ! Component: 200 - total flux cleaned = -0.000151869 Jy ! Total flux subtracted in 200 components = -0.000151869 Jy ! Clean residual min=-0.001852 max=0.001733 Jy/beam ! Clean residual mean=-0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0555963 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0555963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086316Jy sigma=0.000653 ! Fit after self-cal, rms=0.086315Jy sigma=0.000653 wmodel J1421-2001_S_2017_07_09_pus_map.mod ! Writing 44 model components to file: J1421-2001_S_2017_07_09_pus_map.mod wobs J1421-2001_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1421-2001_S_2017_07_09_pus_uvs.fits wwins J1421-2001_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1421-2001_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683307 Jy ! Component: 100 - total flux cleaned = -0.00102705 Jy ! Component: 150 - total flux cleaned = -0.00108759 Jy ! Component: 200 - total flux cleaned = -0.00114282 Jy ! Component: 250 - total flux cleaned = -0.00124937 Jy ! Component: 300 - total flux cleaned = -0.00137892 Jy ! Component: 350 - total flux cleaned = -0.00140435 Jy ! Component: 400 - total flux cleaned = -0.00147786 Jy ! Component: 450 - total flux cleaned = -0.00154907 Jy ! Component: 500 - total flux cleaned = -0.00161844 Jy ! Component: 550 - total flux cleaned = -0.00164106 Jy ! Component: 600 - total flux cleaned = -0.00166314 Jy ! Component: 650 - total flux cleaned = -0.00166298 Jy ! Component: 700 - total flux cleaned = -0.0016633 Jy ! Component: 750 - total flux cleaned = -0.00166354 Jy ! Component: 800 - total flux cleaned = -0.00166397 Jy ! Component: 850 - total flux cleaned = -0.00168398 Jy ! Component: 900 - total flux cleaned = -0.00162449 Jy ! Component: 950 - total flux cleaned = -0.00164409 Jy ! Component: 1000 - total flux cleaned = -0.00162446 Jy ! Component: 1050 - total flux cleaned = -0.00162426 Jy ! Component: 1100 - total flux cleaned = -0.00162394 Jy ! Component: 1150 - total flux cleaned = -0.001569 Jy ! Component: 1200 - total flux cleaned = -0.00156894 Jy ! Component: 1250 - total flux cleaned = -0.0015511 Jy ! Component: 1300 - total flux cleaned = -0.00156868 Jy ! Component: 1350 - total flux cleaned = -0.00158582 Jy ! Component: 1400 - total flux cleaned = -0.00158544 Jy ! Component: 1450 - total flux cleaned = -0.0015686 Jy ! Component: 1500 - total flux cleaned = -0.00158481 Jy ! Component: 1550 - total flux cleaned = -0.0016009 Jy ! Component: 1600 - total flux cleaned = -0.00160084 Jy ! Component: 1650 - total flux cleaned = -0.00163284 Jy ! Component: 1700 - total flux cleaned = -0.00169584 Jy ! Component: 1750 - total flux cleaned = -0.00171154 Jy ! Component: 1800 - total flux cleaned = -0.00175766 Jy ! Component: 1850 - total flux cleaned = -0.00175773 Jy ! Component: 1900 - total flux cleaned = -0.00181783 Jy ! Component: 1950 - total flux cleaned = -0.00189244 Jy ! Component: 2000 - total flux cleaned = -0.0018925 Jy ! Component: 2050 - total flux cleaned = -0.00193593 Jy ! Component: 2100 - total flux cleaned = -0.00190704 Jy ! Component: 2150 - total flux cleaned = -0.00194997 Jy ! Component: 2200 - total flux cleaned = -0.00194987 Jy ! Component: 2250 - total flux cleaned = -0.00193562 Jy ! Component: 2300 - total flux cleaned = -0.00194976 Jy ! Component: 2350 - total flux cleaned = -0.00197707 Jy ! Component: 2400 - total flux cleaned = -0.00196353 Jy ! Component: 2450 - total flux cleaned = -0.00197704 Jy ! Component: 2500 - total flux cleaned = -0.00197704 Jy ! Component: 2550 - total flux cleaned = -0.00192412 Jy ! Component: 2600 - total flux cleaned = -0.00189795 Jy ! Component: 2650 - total flux cleaned = -0.00184624 Jy ! Component: 2700 - total flux cleaned = -0.00184641 Jy ! Component: 2750 - total flux cleaned = -0.00183355 Jy ! Component: 2800 - total flux cleaned = -0.00179572 Jy ! Component: 2850 - total flux cleaned = -0.00175827 Jy ! Component: 2900 - total flux cleaned = -0.00174587 Jy ! Component: 2950 - total flux cleaned = -0.00170923 Jy ! Component: 3000 - total flux cleaned = -0.00170921 Jy ! Component: 3050 - total flux cleaned = -0.00169709 Jy ! Component: 3100 - total flux cleaned = -0.00163697 Jy ! Component: 3150 - total flux cleaned = -0.0016251 Jy ! Component: 3200 - total flux cleaned = -0.00156596 Jy ! Component: 3250 - total flux cleaned = -0.00149547 Jy ! Component: 3300 - total flux cleaned = -0.00147215 Jy ! Component: 3350 - total flux cleaned = -0.00146058 Jy ! Component: 3400 - total flux cleaned = -0.00146062 Jy ! Component: 3450 - total flux cleaned = -0.00140378 Jy ! Component: 3500 - total flux cleaned = -0.0013811 Jy ! Component: 3550 - total flux cleaned = -0.00134755 Jy ! Component: 3600 - total flux cleaned = -0.00133643 Jy ! Component: 3650 - total flux cleaned = -0.00130331 Jy ! Component: 3700 - total flux cleaned = -0.00128134 Jy ! Component: 3750 - total flux cleaned = -0.00124883 Jy ! Component: 3800 - total flux cleaned = -0.00122729 Jy ! Component: 3850 - total flux cleaned = -0.0012166 Jy ! Component: 3900 - total flux cleaned = -0.00122732 Jy ! Component: 3950 - total flux cleaned = -0.00122734 Jy ! Component: 4000 - total flux cleaned = -0.00122738 Jy ! Component: 4050 - total flux cleaned = -0.00122732 Jy ! Total flux subtracted in 4096 components = -0.00123761 Jy ! Clean residual min=-0.000538 max=0.000518 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0543587 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 326 components and 0.0543586 Jy ![Exited script file: muppet] wmap "J1421-2001_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.131 at -7.099 degrees (North through East) ! Clean map min=-0.001179 max=0.053394 Jy/beam ! Writing clean map to FITS file: J1421-2001_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0533941 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04305 1.04305 2.08611 4.17221 8.34443 16.6889 33.3777 66.7554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.131 at -7.099 degrees (North through East) ! Clean map min=-0.001179 max=0.053394 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1421-2001_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:50:45 2019