! Started logfile: J1421-1931_S_2017_10_09_pus_uvs.log on Sun May 12 13:14:12 2019 obs J1421-1931_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1421-1931_S_2017_10_09_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.737817 visibilities/baseline/integration-bin. ! Found source: J1421-1931 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1421-1931_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 652 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.899410Jy sigma=0.006569 ! Fit after self-cal, rms=0.886345Jy sigma=0.006480 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=13.8 mas, bpa=-16.21 degrees ! Estimated noise=1579.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884019 Jy ! Component: 100 - total flux cleaned = 0.112248 Jy ! Total flux subtracted in 100 components = 0.112248 Jy ! Clean residual min=-0.006038 max=0.009416 Jy/beam ! Clean residual mean=-0.000033 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.112248 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.112248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102538Jy sigma=0.000682 ! Fit after self-cal, rms=0.102515Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=16.64 mas, bpa=-14.91 degrees ! Estimated noise=1115.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128748 Jy ! Component: 100 - total flux cleaned = 0.0187804 Jy ! Component: 150 - total flux cleaned = 0.021973 Jy ! Component: 200 - total flux cleaned = 0.0240001 Jy ! Total flux subtracted in 200 components = 0.0240001 Jy ! Clean residual min=-0.004043 max=0.003460 Jy/beam ! Clean residual mean=-0.000003 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.136248 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 63 components and 0.136248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100917Jy sigma=0.000671 ! Fit after self-cal, rms=0.100907Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.03 KP 1.06 ! LA 1.01 MK 1.06 NL 0.91 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.02 KP 1.01 ! LA 0.98 MK 1.01 NL 1.02 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.01 HN 1.01 KP 0.90 ! LA 0.79 MK 1.00 NL 1.24 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 1.00* ! LA 1.00* MK 1.03 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.100907Jy sigma=0.000671 ! Fit after self-cal, rms=0.099689Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=16.68 mas, bpa=-14.95 degrees ! Estimated noise=1132.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232637 Jy ! Component: 100 - total flux cleaned = -0.00255015 Jy ! Component: 150 - total flux cleaned = -0.00246114 Jy ! Component: 200 - total flux cleaned = -0.00238839 Jy ! Total flux subtracted in 200 components = -0.00238839 Jy ! Clean residual min=-0.003245 max=0.003196 Jy/beam ! Clean residual mean=0.000004 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.13386 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.13386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099614Jy sigma=0.000666 ! Fit after self-cal, rms=0.099596Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099596Jy sigma=0.000666 ! Fit after self-cal, rms=0.100576Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=16.87 mas, bpa=-15.21 degrees ! Estimated noise=1133.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161155 Jy ! Component: 100 - total flux cleaned = 0.00012963 Jy ! Component: 150 - total flux cleaned = 4.47902e-05 Jy ! Component: 200 - total flux cleaned = -4.75685e-06 Jy ! Total flux subtracted in 200 components = -4.75685e-06 Jy ! Clean residual min=-0.002511 max=0.002680 Jy/beam ! Clean residual mean=0.000007 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.133855 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.133855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100555Jy sigma=0.000664 ! Fit after self-cal, rms=0.100586Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.91188e-05 Jy ! Component: 100 - total flux cleaned = -0.000138194 Jy ! Component: 150 - total flux cleaned = -0.000179864 Jy ! Component: 200 - total flux cleaned = -0.000216635 Jy ! Total flux subtracted in 200 components = -0.000216635 Jy ! Clean residual min=-0.002590 max=0.002660 Jy/beam ! Clean residual mean=0.000006 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.133638 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.133638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100575Jy sigma=0.000664 ! Fit after self-cal, rms=0.100571Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100571Jy sigma=0.000664 ! Fit after self-cal, rms=0.101208Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=16.93 mas, bpa=-15.27 degrees ! Estimated noise=1134.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52256e-05 Jy ! Component: 100 - total flux cleaned = 4.00282e-05 Jy ! Component: 150 - total flux cleaned = -1.1151e-06 Jy ! Component: 200 - total flux cleaned = -3.85063e-05 Jy ! Total flux subtracted in 200 components = -3.85063e-05 Jy ! Clean residual min=-0.002562 max=0.002593 Jy/beam ! Clean residual mean=0.000007 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.1336 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.1336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101197Jy sigma=0.000664 ! Fit after self-cal, rms=0.101201Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.31474e-05 Jy ! Component: 100 - total flux cleaned = -8.77697e-05 Jy ! Component: 150 - total flux cleaned = -0.000119412 Jy ! Component: 200 - total flux cleaned = -0.000149616 Jy ! Total flux subtracted in 200 components = -0.000149616 Jy ! Clean residual min=-0.002572 max=0.002562 Jy/beam ! Clean residual mean=0.000007 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.13345 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.13345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101194Jy sigma=0.000664 ! Fit after self-cal, rms=0.101191Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101191Jy sigma=0.000664 ! Fit after self-cal, rms=0.101615Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.167 mas, bmaj=21.48 mas, bpa=-8.245 degrees ! Estimated noise=1341.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52962e-05 Jy ! Component: 100 - total flux cleaned = 1.61648e-05 Jy ! Component: 150 - total flux cleaned = 1.64024e-05 Jy ! Component: 200 - total flux cleaned = 8.79916e-06 Jy ! Total flux subtracted in 200 components = 8.79916e-06 Jy ! Clean residual min=-0.002688 max=0.002438 Jy/beam ! Clean residual mean=0.000014 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.133459 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 103 components and 0.133459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101614Jy sigma=0.000664 ! Fit after self-cal, rms=0.101619Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.696e-06 Jy ! Component: 100 - total flux cleaned = 3.43362e-06 Jy ! Component: 150 - total flux cleaned = 3.50888e-06 Jy ! Component: 200 - total flux cleaned = -3.49993e-06 Jy ! Total flux subtracted in 200 components = -3.49993e-06 Jy ! Clean residual min=-0.002693 max=0.002433 Jy/beam ! Clean residual mean=0.000014 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.133455 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 108 components and 0.133455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101618Jy sigma=0.000664 ! Fit after self-cal, rms=0.101616Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=16.98 mas, bpa=-15.3 degrees ! Estimated noise=1136.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 16.98 at -15.3 degrees (North through East) ! Clean map min=-0.0025475 max=0.11568 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=13.75 mas, bpa=-16.78 degrees ! Estimated noise=1620.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880903 Jy ! Component: 100 - total flux cleaned = 0.112203 Jy ! Component: 150 - total flux cleaned = 0.12183 Jy ! Component: 200 - total flux cleaned = 0.126505 Jy ! Total flux subtracted in 200 components = 0.126505 Jy ! Clean residual min=-0.004656 max=0.004708 Jy/beam ! Clean residual mean=-0.000008 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.126505 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.126505 Jy ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=16.98 mas, bpa=-15.3 degrees ! Estimated noise=1136.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374902 Jy ! Component: 100 - total flux cleaned = 0.00461562 Jy ! Component: 150 - total flux cleaned = 0.00526663 Jy ! Component: 200 - total flux cleaned = 0.00562928 Jy ! Total flux subtracted in 200 components = 0.00562928 Jy ! Clean residual min=-0.002797 max=0.002495 Jy/beam ! Clean residual mean=0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.132135 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 0.132135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.167 mas, bmaj=21.48 mas, bpa=-8.245 degrees ! Estimated noise=1341.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107485 Jy ! Component: 100 - total flux cleaned = 0.00121233 Jy ! Component: 150 - total flux cleaned = 0.00121271 Jy ! Component: 200 - total flux cleaned = 0.00121256 Jy ! Total flux subtracted in 200 components = 0.00121256 Jy ! Clean residual min=-0.002746 max=0.002381 Jy/beam ! Clean residual mean=0.000014 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.133347 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07917e-07 Jy ! Component: 100 - total flux cleaned = -1.02777e-07 Jy ! Component: 150 - total flux cleaned = 1.40516e-07 Jy ! Component: 200 - total flux cleaned = -3.89446e-08 Jy ! Total flux subtracted in 200 components = -3.89446e-08 Jy ! Clean residual min=-0.002746 max=0.002392 Jy/beam ! Clean residual mean=0.000014 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.133347 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.133347 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=16.98 mas, bpa=-15.3 degrees ! Estimated noise=1136.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192089 Jy ! Component: 100 - total flux cleaned = -0.000221819 Jy ! Component: 150 - total flux cleaned = -0.000274489 Jy ! Component: 200 - total flux cleaned = -0.000297826 Jy ! Total flux subtracted in 200 components = -0.000297826 Jy ! Clean residual min=-0.002636 max=0.002579 Jy/beam ! Clean residual mean=0.000006 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.133049 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.133049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101630Jy sigma=0.000664 ! Fit after self-cal, rms=0.101606Jy sigma=0.000664 wmodel J1421-1931_S_2017_10_09_pus_map.mod ! Writing 92 model components to file: J1421-1931_S_2017_10_09_pus_map.mod wobs J1421-1931_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1421-1931_S_2017_10_09_pus_uvs.fits wwins J1421-1931_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1421-1931_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000575364 Jy ! Component: 100 - total flux cleaned = -0.00107698 Jy ! Component: 150 - total flux cleaned = -0.0011128 Jy ! Component: 200 - total flux cleaned = -0.00107573 Jy ! Component: 250 - total flux cleaned = -0.00111016 Jy ! Component: 300 - total flux cleaned = -0.00120803 Jy ! Component: 350 - total flux cleaned = -0.00136463 Jy ! Component: 400 - total flux cleaned = -0.00154641 Jy ! Component: 450 - total flux cleaned = -0.00157599 Jy ! Component: 500 - total flux cleaned = -0.00160505 Jy ! Component: 550 - total flux cleaned = -0.00154921 Jy ! Component: 600 - total flux cleaned = -0.00152272 Jy ! Component: 650 - total flux cleaned = -0.00152278 Jy ! Component: 700 - total flux cleaned = -0.00144588 Jy ! Component: 750 - total flux cleaned = -0.00152237 Jy ! Component: 800 - total flux cleaned = -0.0016212 Jy ! Component: 850 - total flux cleaned = -0.00169283 Jy ! Component: 900 - total flux cleaned = -0.0016451 Jy ! Component: 950 - total flux cleaned = -0.00169151 Jy ! Component: 1000 - total flux cleaned = -0.00171461 Jy ! Component: 1050 - total flux cleaned = -0.00175913 Jy ! Component: 1100 - total flux cleaned = -0.00182431 Jy ! Component: 1150 - total flux cleaned = -0.00184519 Jy ! Component: 1200 - total flux cleaned = -0.00184505 Jy ! Component: 1250 - total flux cleaned = -0.00184513 Jy ! Component: 1300 - total flux cleaned = -0.00186486 Jy ! Component: 1350 - total flux cleaned = -0.00178606 Jy ! Component: 1400 - total flux cleaned = -0.00176658 Jy ! Component: 1450 - total flux cleaned = -0.00170958 Jy ! Component: 1500 - total flux cleaned = -0.00165368 Jy ! Component: 1550 - total flux cleaned = -0.0016356 Jy ! Component: 1600 - total flux cleaned = -0.00158132 Jy ! Component: 1650 - total flux cleaned = -0.00152798 Jy ! Component: 1700 - total flux cleaned = -0.00147524 Jy ! Component: 1750 - total flux cleaned = -0.00142335 Jy ! Component: 1800 - total flux cleaned = -0.00140619 Jy ! Component: 1850 - total flux cleaned = -0.0013728 Jy ! Component: 1900 - total flux cleaned = -0.00138942 Jy ! Component: 1950 - total flux cleaned = -0.00132441 Jy ! Component: 2000 - total flux cleaned = -0.00134069 Jy ! Component: 2050 - total flux cleaned = -0.0013092 Jy ! Component: 2100 - total flux cleaned = -0.00132481 Jy ! Component: 2150 - total flux cleaned = -0.00127862 Jy ! Component: 2200 - total flux cleaned = -0.00123324 Jy ! Component: 2250 - total flux cleaned = -0.00126343 Jy ! Component: 2300 - total flux cleaned = -0.00126331 Jy ! Component: 2350 - total flux cleaned = -0.00124848 Jy ! Component: 2400 - total flux cleaned = -0.00121981 Jy ! Component: 2450 - total flux cleaned = -0.00119132 Jy ! Component: 2500 - total flux cleaned = -0.0011771 Jy ! Component: 2550 - total flux cleaned = -0.0010932 Jy ! Component: 2600 - total flux cleaned = -0.00106552 Jy ! Component: 2650 - total flux cleaned = -0.00101074 Jy ! Component: 2700 - total flux cleaned = -0.00101063 Jy ! Component: 2750 - total flux cleaned = -0.000957323 Jy ! Component: 2800 - total flux cleaned = -0.000957269 Jy ! Component: 2850 - total flux cleaned = -0.000917985 Jy ! Component: 2900 - total flux cleaned = -0.000866222 Jy ! Component: 2950 - total flux cleaned = -0.000827636 Jy ! Component: 3000 - total flux cleaned = -0.000764086 Jy ! Component: 3050 - total flux cleaned = -0.000701181 Jy ! Component: 3100 - total flux cleaned = -0.000651613 Jy ! Component: 3150 - total flux cleaned = -0.000676234 Jy ! Component: 3200 - total flux cleaned = -0.000578316 Jy ! Component: 3250 - total flux cleaned = -0.000566362 Jy ! Component: 3300 - total flux cleaned = -0.0005423 Jy ! Component: 3350 - total flux cleaned = -0.000494694 Jy ! Component: 3400 - total flux cleaned = -0.000459236 Jy ! Component: 3450 - total flux cleaned = -0.000423996 Jy ! Component: 3500 - total flux cleaned = -0.00038913 Jy ! Component: 3550 - total flux cleaned = -0.000354565 Jy ! Component: 3600 - total flux cleaned = -0.000331606 Jy ! Component: 3650 - total flux cleaned = -0.000252161 Jy ! Component: 3700 - total flux cleaned = -0.000218368 Jy ! Component: 3750 - total flux cleaned = -0.000162337 Jy ! Component: 3800 - total flux cleaned = -0.000106715 Jy ! Component: 3850 - total flux cleaned = -5.14181e-05 Jy ! Component: 3900 - total flux cleaned = 3.38166e-06 Jy ! Component: 3950 - total flux cleaned = 4.70742e-05 Jy ! Component: 4000 - total flux cleaned = 7.96674e-05 Jy ! Component: 4050 - total flux cleaned = 0.000166063 Jy ! Total flux subtracted in 4096 components = 0.000176755 Jy ! Clean residual min=-0.000636 max=0.000620 Jy/beam ! Clean residual mean=0.000004 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.133226 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 360 components and 0.133226 Jy ![Exited script file: muppet] wmap "J1421-1931_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 16.98 at -15.3 degrees (North through East) ! Clean map min=-0.0019396 max=0.11623 Jy/beam ! Writing clean map to FITS file: J1421-1931_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018485 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477109 0.477109 0.954219 1.90844 3.81688 7.63375 15.2675 30.535 61.07 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 16.98 at -15.3 degrees (North through East) ! Clean map min=-0.0019396 max=0.11623 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1421-1931_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:14:17 2019