! Started logfile: J1421-1931_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:39 2019 obs J1421-1931_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1421-1931_S_2017_05_01_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.787269 visibilities/baseline/integration-bin. ! Found source: J1421-1931 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 13604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1421-1931_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 521 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.863205Jy sigma=0.016368 ! Fit after self-cal, rms=0.851402Jy sigma=0.016312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=6.589 mas, bpa=-4.067 degrees ! Estimated noise=1092.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946606 Jy ! Component: 100 - total flux cleaned = 0.111403 Jy ! Total flux subtracted in 100 components = 0.111403 Jy ! Clean residual min=-0.024038 max=0.028348 Jy/beam ! Clean residual mean=-0.000018 rms=0.008140 Jy/beam ! Combined flux in latest and established models = 0.111403 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.111403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117618Jy sigma=0.001778 ! Fit after self-cal, rms=0.117544Jy sigma=0.001776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=8.233 mas, bpa=-0.8929 degrees ! Estimated noise=772.288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379 Jy ! Component: 100 - total flux cleaned = 0.00235123 Jy ! Component: 150 - total flux cleaned = 0.00144343 Jy ! Component: 200 - total flux cleaned = 0.000513405 Jy ! Total flux subtracted in 200 components = 0.000513405 Jy ! Clean residual min=-0.021410 max=0.024301 Jy/beam ! Clean residual mean=-0.000033 rms=0.006815 Jy/beam ! Combined flux in latest and established models = 0.111917 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.111917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114493Jy sigma=0.001827 ! Fit after self-cal, rms=0.114394Jy sigma=0.001827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.78 HN 1.00 KP 0.86 ! LA 0.83 MK 0.92 NL 0.81 OV 0.85 ! PT 0.80 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.81 HN 1.01 KP 0.80 ! LA 0.80 MK 0.90 NL 0.87 OV 0.87 ! PT 0.80 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.86 HN 1.03 KP 0.82 ! LA 0.81 MK 0.97 NL 0.86 OV 0.82 ! PT 0.77 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 1.12 KP 1.00* ! LA 15.84 MK 1.09 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.114394Jy sigma=0.001827 ! Fit after self-cal, rms=0.088847Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=7.994 mas, bpa=0.8724 degrees ! Estimated noise=759.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849167 Jy ! Component: 100 - total flux cleaned = 0.00094035 Jy ! Component: 150 - total flux cleaned = 0.000965003 Jy ! Component: 200 - total flux cleaned = 0.00100823 Jy ! Total flux subtracted in 200 components = 0.00100823 Jy ! Clean residual min=-0.002747 max=0.002581 Jy/beam ! Clean residual mean=0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.112925 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.112925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088819Jy sigma=0.000677 ! Fit after self-cal, rms=0.086599Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086599Jy sigma=0.000666 ! Fit after self-cal, rms=0.085149Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.99 mas, bpa=0.5006 degrees ! Estimated noise=753.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927838 Jy ! Component: 100 - total flux cleaned = 0.00104973 Jy ! Component: 150 - total flux cleaned = 0.00110096 Jy ! Component: 200 - total flux cleaned = 0.00114819 Jy ! Total flux subtracted in 200 components = 0.00114819 Jy ! Clean residual min=-0.002043 max=0.001965 Jy/beam ! Clean residual mean=-0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.114073 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.114073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085127Jy sigma=0.000660 ! Fit after self-cal, rms=0.085274Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10576e-05 Jy ! Component: 100 - total flux cleaned = 7.88039e-05 Jy ! Component: 150 - total flux cleaned = 9.55346e-05 Jy ! Component: 200 - total flux cleaned = 0.000110983 Jy ! Total flux subtracted in 200 components = 0.000110983 Jy ! Clean residual min=-0.001973 max=0.001883 Jy/beam ! Clean residual mean=-0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.114184 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.114184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085266Jy sigma=0.000659 ! Fit after self-cal, rms=0.085266Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085266Jy sigma=0.000659 ! Fit after self-cal, rms=0.085400Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=7.978 mas, bpa=0.4441 degrees ! Estimated noise=754.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720035 Jy ! Component: 100 - total flux cleaned = 0.00080987 Jy ! Component: 150 - total flux cleaned = 0.000841476 Jy ! Component: 200 - total flux cleaned = 0.000870932 Jy ! Total flux subtracted in 200 components = 0.000870932 Jy ! Clean residual min=-0.001911 max=0.001789 Jy/beam ! Clean residual mean=-0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.115055 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.115055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085391Jy sigma=0.000659 ! Fit after self-cal, rms=0.085400Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82872e-05 Jy ! Component: 100 - total flux cleaned = 6.70963e-05 Jy ! Component: 150 - total flux cleaned = 7.90097e-05 Jy ! Component: 200 - total flux cleaned = 9.0467e-05 Jy ! Total flux subtracted in 200 components = 9.0467e-05 Jy ! Clean residual min=-0.001891 max=0.001764 Jy/beam ! Clean residual mean=-0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.115146 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.115146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085396Jy sigma=0.000659 ! Fit after self-cal, rms=0.085397Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085397Jy sigma=0.000659 ! Fit after self-cal, rms=0.085319Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.769 mas, bmaj=16.34 mas, bpa=4.394 degrees ! Estimated noise=869.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688239 Jy ! Component: 100 - total flux cleaned = 0.000973953 Jy ! Component: 150 - total flux cleaned = 0.00100041 Jy ! Component: 200 - total flux cleaned = 0.00101852 Jy ! Total flux subtracted in 200 components = 0.00101852 Jy ! Clean residual min=-0.001716 max=0.001770 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.116164 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.116164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085318Jy sigma=0.000659 ! Fit after self-cal, rms=0.085317Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69198e-05 Jy ! Component: 100 - total flux cleaned = 3.02558e-05 Jy ! Component: 150 - total flux cleaned = 4.12308e-05 Jy ! Component: 200 - total flux cleaned = 5.14254e-05 Jy ! Total flux subtracted in 200 components = 5.14254e-05 Jy ! Clean residual min=-0.001714 max=0.001757 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.116216 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.116216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085317Jy sigma=0.000659 ! Fit after self-cal, rms=0.085318Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=7.966 mas, bpa=0.4452 degrees ! Estimated noise=755.315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 7.966 at 0.4452 degrees (North through East) ! Clean map min=-0.0017583 max=0.12195 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=6.653 mas, bpa=0.7011 degrees ! Estimated noise=1105.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096785 Jy ! Component: 100 - total flux cleaned = 0.11789 Jy ! Component: 150 - total flux cleaned = 0.118195 Jy ! Component: 200 - total flux cleaned = 0.117686 Jy ! Total flux subtracted in 200 components = 0.117686 Jy ! Clean residual min=-0.002790 max=0.002608 Jy/beam ! Clean residual mean=-0.000004 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.117686 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.117686 Jy ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=7.966 mas, bpa=0.4452 degrees ! Estimated noise=755.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000955918 Jy ! Component: 100 - total flux cleaned = -0.00109515 Jy ! Component: 150 - total flux cleaned = -0.00125758 Jy ! Component: 200 - total flux cleaned = -0.00134567 Jy ! Total flux subtracted in 200 components = -0.00134567 Jy ! Clean residual min=-0.001772 max=0.001751 Jy/beam ! Clean residual mean=-0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.11634 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.11634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.769 mas, bmaj=16.34 mas, bpa=4.394 degrees ! Estimated noise=869.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.71116e-05 Jy ! Component: 100 - total flux cleaned = -2.63191e-05 Jy ! Component: 150 - total flux cleaned = -2.61005e-05 Jy ! Component: 200 - total flux cleaned = -2.63707e-05 Jy ! Total flux subtracted in 200 components = -2.63707e-05 Jy ! Clean residual min=-0.001724 max=0.001713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.116314 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.76521e-07 Jy ! Component: 100 - total flux cleaned = 1.04588e-06 Jy ! Component: 150 - total flux cleaned = 1.598e-06 Jy ! Component: 200 - total flux cleaned = 6.38728e-06 Jy ! Total flux subtracted in 200 components = 6.38728e-06 Jy ! Clean residual min=-0.001725 max=0.001709 Jy/beam ! Clean residual mean=-0.000002 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.11632 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.11632 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=7.966 mas, bpa=0.4452 degrees ! Estimated noise=755.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.72129e-05 Jy ! Component: 100 - total flux cleaned = 4.74229e-05 Jy ! Component: 150 - total flux cleaned = 1.95436e-05 Jy ! Component: 200 - total flux cleaned = -2.69914e-05 Jy ! Total flux subtracted in 200 components = -2.69914e-05 Jy ! Clean residual min=-0.001759 max=0.001731 Jy/beam ! Clean residual mean=-0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.116293 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.116293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085334Jy sigma=0.000659 ! Fit after self-cal, rms=0.085343Jy sigma=0.000659 wmodel J1421-1931_S_2017_05_01_pus_map.mod ! Writing 39 model components to file: J1421-1931_S_2017_05_01_pus_map.mod wobs J1421-1931_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1421-1931_S_2017_05_01_pus_uvs.fits wwins J1421-1931_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1421-1931_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130569 Jy ! Component: 100 - total flux cleaned = -0.000364672 Jy ! Component: 150 - total flux cleaned = -0.000645479 Jy ! Component: 200 - total flux cleaned = -0.00091576 Jy ! Component: 250 - total flux cleaned = -0.00120223 Jy ! Component: 300 - total flux cleaned = -0.00142976 Jy ! Component: 350 - total flux cleaned = -0.00167582 Jy ! Component: 400 - total flux cleaned = -0.00191436 Jy ! Component: 450 - total flux cleaned = -0.00214607 Jy ! Component: 500 - total flux cleaned = -0.00239453 Jy ! Component: 550 - total flux cleaned = -0.00259247 Jy ! Component: 600 - total flux cleaned = -0.00276485 Jy ! Component: 650 - total flux cleaned = -0.0028916 Jy ! Component: 700 - total flux cleaned = -0.00305801 Jy ! Component: 750 - total flux cleaned = -0.00320106 Jy ! Component: 800 - total flux cleaned = -0.00336187 Jy ! Component: 850 - total flux cleaned = -0.0035203 Jy ! Component: 900 - total flux cleaned = -0.00369546 Jy ! Component: 950 - total flux cleaned = -0.00379121 Jy ! Component: 1000 - total flux cleaned = -0.00392329 Jy ! Component: 1050 - total flux cleaned = -0.00405312 Jy ! Component: 1100 - total flux cleaned = -0.00425416 Jy ! Component: 1150 - total flux cleaned = -0.00429008 Jy ! Component: 1200 - total flux cleaned = -0.00444978 Jy ! Component: 1250 - total flux cleaned = -0.00460677 Jy ! Component: 1300 - total flux cleaned = -0.00470994 Jy ! Component: 1350 - total flux cleaned = -0.0047952 Jy ! Component: 1400 - total flux cleaned = -0.00496277 Jy ! Component: 1450 - total flux cleaned = -0.00507847 Jy ! Component: 1500 - total flux cleaned = -0.00519254 Jy ! Component: 1550 - total flux cleaned = -0.00528902 Jy ! Component: 1600 - total flux cleaned = -0.0054478 Jy ! Component: 1650 - total flux cleaned = -0.00555752 Jy ! Component: 1700 - total flux cleaned = -0.00561975 Jy ! Component: 1750 - total flux cleaned = -0.00578848 Jy ! Component: 1800 - total flux cleaned = -0.00598574 Jy ! Component: 1850 - total flux cleaned = -0.00612044 Jy ! Component: 1900 - total flux cleaned = -0.00620925 Jy ! Component: 1950 - total flux cleaned = -0.00641487 Jy ! Component: 2000 - total flux cleaned = -0.00650196 Jy ! Component: 2050 - total flux cleaned = -0.0066457 Jy ! Component: 2100 - total flux cleaned = -0.00678798 Jy ! Component: 2150 - total flux cleaned = -0.00690067 Jy ! Component: 2200 - total flux cleaned = -0.00705413 Jy ! Component: 2250 - total flux cleaned = -0.00713694 Jy ! Component: 2300 - total flux cleaned = -0.00727371 Jy ! Component: 2350 - total flux cleaned = -0.00742285 Jy ! Component: 2400 - total flux cleaned = -0.00755715 Jy ! Component: 2450 - total flux cleaned = -0.00769013 Jy ! Component: 2500 - total flux cleaned = -0.00780875 Jy ! Component: 2550 - total flux cleaned = -0.00796564 Jy ! Component: 2600 - total flux cleaned = -0.00808214 Jy ! Component: 2650 - total flux cleaned = -0.00821027 Jy ! Component: 2700 - total flux cleaned = -0.00829928 Jy ! Component: 2750 - total flux cleaned = -0.00843803 Jy ! Component: 2800 - total flux cleaned = -0.00853807 Jy ! Component: 2850 - total flux cleaned = -0.00864961 Jy ! Component: 2900 - total flux cleaned = -0.00876031 Jy ! Component: 2950 - total flux cleaned = -0.00893105 Jy ! Component: 3000 - total flux cleaned = -0.00902781 Jy ! Component: 3050 - total flux cleaned = -0.00913572 Jy ! Component: 3100 - total flux cleaned = -0.009243 Jy ! Component: 3150 - total flux cleaned = -0.00933742 Jy ! Component: 3200 - total flux cleaned = -0.00943119 Jy ! Component: 3250 - total flux cleaned = -0.00955918 Jy ! Component: 3300 - total flux cleaned = -0.00966296 Jy ! Component: 3350 - total flux cleaned = -0.00978892 Jy ! Component: 3400 - total flux cleaned = -0.00990261 Jy ! Component: 3450 - total flux cleaned = -0.00997037 Jy ! Component: 3500 - total flux cleaned = -0.0100376 Jy ! Component: 3550 - total flux cleaned = -0.0101044 Jy ! Component: 3600 - total flux cleaned = -0.0102481 Jy ! Component: 3650 - total flux cleaned = -0.0103031 Jy ! Component: 3700 - total flux cleaned = -0.0103904 Jy ! Component: 3750 - total flux cleaned = -0.0104772 Jy ! Component: 3800 - total flux cleaned = -0.0105095 Jy ! Component: 3850 - total flux cleaned = -0.0105844 Jy ! Component: 3900 - total flux cleaned = -0.0106802 Jy ! Component: 3950 - total flux cleaned = -0.0107543 Jy ! Component: 4000 - total flux cleaned = -0.0108489 Jy ! Component: 4050 - total flux cleaned = -0.010922 Jy ! Total flux subtracted in 4096 components = -0.0109844 Jy ! Clean residual min=-0.000586 max=0.000579 Jy/beam ! Clean residual mean=-0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.105309 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 290 components and 0.105309 Jy ![Exited script file: muppet] wmap "J1421-1931_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 7.966 at 0.4452 degrees (North through East) ! Clean map min=-0.0013246 max=0.12188 Jy/beam ! Writing clean map to FITS file: J1421-1931_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0001803 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.443787 0.443787 0.887573 1.77515 3.55029 7.10059 14.2012 28.4023 56.8047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 7.966 at 0.4452 degrees (North through East) ! Clean map min=-0.0013246 max=0.12188 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1421-1931_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:43 2019