! Started logfile: J1420+1703_S_2017_07_09_pus_uvs.log on Wed May 8 14:50:31 2019 obs J1420+1703_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1420+1703_S_2017_07_09_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95775 visibilities/baseline/integration-bin. ! Found source: J1420+1703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1420+1703_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 426 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885533Jy sigma=0.008853 ! Fit after self-cal, rms=0.878978Jy sigma=0.008796 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=6.566 mas, bpa=-2.206 degrees ! Estimated noise=996.138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0956929 Jy ! Component: 100 - total flux cleaned = 0.116561 Jy ! Total flux subtracted in 100 components = 0.116561 Jy ! Clean residual min=-0.003900 max=0.005843 Jy/beam ! Clean residual mean=-0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.116561 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.116561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073646Jy sigma=0.000697 ! Fit after self-cal, rms=0.073642Jy sigma=0.000697 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.528 mas, bpa=-2.08 degrees ! Estimated noise=677.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629848 Jy ! Component: 100 - total flux cleaned = 0.00902494 Jy ! Component: 150 - total flux cleaned = 0.0105253 Jy ! Component: 200 - total flux cleaned = 0.0114255 Jy ! Total flux subtracted in 200 components = 0.0114255 Jy ! Clean residual min=-0.003124 max=0.003374 Jy/beam ! Clean residual mean=0.000006 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.127986 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.127986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073134Jy sigma=0.000692 ! Fit after self-cal, rms=0.073142Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.93 HN 0.95 KP 1.01 ! LA 1.01 MK 1.14 NL 0.95 OV 1.02 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.95 HN 0.95 KP 0.99 ! LA 0.98 MK 1.13 NL 1.09 OV 1.05 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.96 KP 0.96 ! LA 0.97 MK 0.99 NL 0.95 OV 0.95 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.92 KP 1.00* ! LA 0.94 MK 1.09 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.073142Jy sigma=0.000692 ! Fit after self-cal, rms=0.073953Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.581 mas, bpa=-1.603 degrees ! Estimated noise=679.249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123126 Jy ! Component: 100 - total flux cleaned = -0.00136893 Jy ! Component: 150 - total flux cleaned = -0.00145036 Jy ! Component: 200 - total flux cleaned = -0.00149739 Jy ! Total flux subtracted in 200 components = -0.00149739 Jy ! Clean residual min=-0.002635 max=0.002723 Jy/beam ! Clean residual mean=0.000007 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.126489 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.126489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073926Jy sigma=0.000684 ! Fit after self-cal, rms=0.073969Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073969Jy sigma=0.000684 ! Fit after self-cal, rms=0.076050Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.571 mas, bpa=-1.755 degrees ! Estimated noise=680.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98338e-05 Jy ! Component: 100 - total flux cleaned = 1.91335e-05 Jy ! Component: 150 - total flux cleaned = 5.9234e-06 Jy ! Component: 200 - total flux cleaned = 6.66433e-06 Jy ! Total flux subtracted in 200 components = 6.66433e-06 Jy ! Clean residual min=-0.001940 max=0.001696 Jy/beam ! Clean residual mean=0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.126495 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.126495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076044Jy sigma=0.000674 ! Fit after self-cal, rms=0.076109Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48759e-05 Jy ! Component: 100 - total flux cleaned = -3.53049e-05 Jy ! Component: 150 - total flux cleaned = -4.4676e-05 Jy ! Component: 200 - total flux cleaned = -5.29253e-05 Jy ! Total flux subtracted in 200 components = -5.29253e-05 Jy ! Clean residual min=-0.001915 max=0.001711 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.126442 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.126442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076106Jy sigma=0.000674 ! Fit after self-cal, rms=0.076105Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076105Jy sigma=0.000674 ! Fit after self-cal, rms=0.076501Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.573 mas, bpa=-1.834 degrees ! Estimated noise=679.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43266e-05 Jy ! Component: 100 - total flux cleaned = -5.40806e-05 Jy ! Component: 150 - total flux cleaned = -6.21514e-05 Jy ! Component: 200 - total flux cleaned = -6.2165e-05 Jy ! Total flux subtracted in 200 components = -6.2165e-05 Jy ! Clean residual min=-0.001880 max=0.001613 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.12638 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.12638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076497Jy sigma=0.000673 ! Fit after self-cal, rms=0.076504Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.97619e-06 Jy ! Component: 100 - total flux cleaned = -7.10016e-06 Jy ! Component: 150 - total flux cleaned = -1.76033e-05 Jy ! Component: 200 - total flux cleaned = -2.2224e-05 Jy ! Total flux subtracted in 200 components = -2.2224e-05 Jy ! Clean residual min=-0.001873 max=0.001615 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.126358 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.126358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076503Jy sigma=0.000673 ! Fit after self-cal, rms=0.076502Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076502Jy sigma=0.000673 ! Fit after self-cal, rms=0.076506Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=11.23 mas, bpa=-6.36 degrees ! Estimated noise=840.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000439266 Jy ! Component: 100 - total flux cleaned = -0.000525807 Jy ! Component: 150 - total flux cleaned = -0.000538463 Jy ! Component: 200 - total flux cleaned = -0.000544042 Jy ! Total flux subtracted in 200 components = -0.000544042 Jy ! Clean residual min=-0.001765 max=0.001997 Jy/beam ! Clean residual mean=0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.125814 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 59 components and 0.125814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076506Jy sigma=0.000673 ! Fit after self-cal, rms=0.076505Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9986e-05 Jy ! Component: 100 - total flux cleaned = -1.96978e-05 Jy ! Component: 150 - total flux cleaned = -2.42461e-05 Jy ! Component: 200 - total flux cleaned = -2.86299e-05 Jy ! Total flux subtracted in 200 components = -2.86299e-05 Jy ! Clean residual min=-0.001756 max=0.001993 Jy/beam ! Clean residual mean=0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.125785 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.125785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076505Jy sigma=0.000673 ! Fit after self-cal, rms=0.076505Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=7.576 mas, bpa=-1.894 degrees ! Estimated noise=679.375 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 7.576 at -1.894 degrees (North through East) ! Clean map min=-0.0018218 max=0.12429 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.604 mas, bpa=-2.066 degrees ! Estimated noise=1004.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964292 Jy ! Component: 100 - total flux cleaned = 0.117478 Jy ! Component: 150 - total flux cleaned = 0.122637 Jy ! Component: 200 - total flux cleaned = 0.124918 Jy ! Total flux subtracted in 200 components = 0.124918 Jy ! Clean residual min=-0.002817 max=0.002960 Jy/beam ! Clean residual mean=0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.124918 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.124918 Jy ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=7.576 mas, bpa=-1.894 degrees ! Estimated noise=679.375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012488 Jy ! Component: 100 - total flux cleaned = 0.00147385 Jy ! Component: 150 - total flux cleaned = 0.00144673 Jy ! Component: 200 - total flux cleaned = 0.00142318 Jy ! Total flux subtracted in 200 components = 0.00142318 Jy ! Clean residual min=-0.001875 max=0.001646 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.126341 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.126341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=11.23 mas, bpa=-6.36 degrees ! Estimated noise=840.769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359665 Jy ! Component: 100 - total flux cleaned = -0.000395486 Jy ! Component: 150 - total flux cleaned = -0.000424576 Jy ! Component: 200 - total flux cleaned = -0.000448602 Jy ! Total flux subtracted in 200 components = -0.000448602 Jy ! Clean residual min=-0.001758 max=0.002002 Jy/beam ! Clean residual mean=0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.125893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09635e-05 Jy ! Component: 100 - total flux cleaned = -3.90363e-05 Jy ! Component: 150 - total flux cleaned = -5.16941e-05 Jy ! Component: 200 - total flux cleaned = -5.55195e-05 Jy ! Total flux subtracted in 200 components = -5.55195e-05 Jy ! Clean residual min=-0.001752 max=0.001997 Jy/beam ! Clean residual mean=0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.125837 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.125837 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=7.576 mas, bpa=-1.894 degrees ! Estimated noise=679.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236842 Jy ! Component: 100 - total flux cleaned = 0.000205484 Jy ! Component: 150 - total flux cleaned = 0.000178901 Jy ! Component: 200 - total flux cleaned = 0.000155466 Jy ! Total flux subtracted in 200 components = 0.000155466 Jy ! Clean residual min=-0.001882 max=0.001648 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.125993 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.125993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076510Jy sigma=0.000673 ! Fit after self-cal, rms=0.076510Jy sigma=0.000673 wmodel J1420+1703_S_2017_07_09_pus_map.mod ! Writing 50 model components to file: J1420+1703_S_2017_07_09_pus_map.mod wobs J1420+1703_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1420+1703_S_2017_07_09_pus_uvs.fits wwins J1420+1703_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1420+1703_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188449 Jy ! Component: 100 - total flux cleaned = -0.000159752 Jy ! Component: 150 - total flux cleaned = -0.000215969 Jy ! Component: 200 - total flux cleaned = -0.000163188 Jy ! Component: 250 - total flux cleaned = -8.5468e-05 Jy ! Component: 300 - total flux cleaned = 9.19818e-05 Jy ! Component: 350 - total flux cleaned = 0.000289578 Jy ! Component: 400 - total flux cleaned = 0.000410206 Jy ! Component: 450 - total flux cleaned = 0.000528098 Jy ! Component: 500 - total flux cleaned = 0.000643392 Jy ! Component: 550 - total flux cleaned = 0.00071168 Jy ! Component: 600 - total flux cleaned = 0.000823482 Jy ! Component: 650 - total flux cleaned = 0.000933336 Jy ! Component: 700 - total flux cleaned = 0.001041 Jy ! Component: 750 - total flux cleaned = 0.00108322 Jy ! Component: 800 - total flux cleaned = 0.00112504 Jy ! Component: 850 - total flux cleaned = 0.00120746 Jy ! Component: 900 - total flux cleaned = 0.00128875 Jy ! Component: 950 - total flux cleaned = 0.00134865 Jy ! Component: 1000 - total flux cleaned = 0.00136832 Jy ! Component: 1050 - total flux cleaned = 0.00140739 Jy ! Component: 1100 - total flux cleaned = 0.00142672 Jy ! Component: 1150 - total flux cleaned = 0.00150299 Jy ! Component: 1200 - total flux cleaned = 0.00152225 Jy ! Component: 1250 - total flux cleaned = 0.00161568 Jy ! Component: 1300 - total flux cleaned = 0.00165243 Jy ! Component: 1350 - total flux cleaned = 0.00170725 Jy ! Component: 1400 - total flux cleaned = 0.00177928 Jy ! Component: 1450 - total flux cleaned = 0.00183267 Jy ! Component: 1500 - total flux cleaned = 0.00188583 Jy ! Component: 1550 - total flux cleaned = 0.00195611 Jy ! Component: 1600 - total flux cleaned = 0.00202549 Jy ! Component: 1650 - total flux cleaned = 0.00202562 Jy ! Component: 1700 - total flux cleaned = 0.00214485 Jy ! Component: 1750 - total flux cleaned = 0.00211135 Jy ! Component: 1800 - total flux cleaned = 0.00212847 Jy ! Component: 1850 - total flux cleaned = 0.0021947 Jy ! Component: 1900 - total flux cleaned = 0.00216212 Jy ! Component: 1950 - total flux cleaned = 0.00222712 Jy ! Component: 2000 - total flux cleaned = 0.00222743 Jy ! Component: 2050 - total flux cleaned = 0.00227541 Jy ! Component: 2100 - total flux cleaned = 0.00227555 Jy ! Component: 2150 - total flux cleaned = 0.00225964 Jy ! Component: 2200 - total flux cleaned = 0.00229078 Jy ! Component: 2250 - total flux cleaned = 0.00233713 Jy ! Component: 2300 - total flux cleaned = 0.0023063 Jy ! Component: 2350 - total flux cleaned = 0.00227597 Jy ! Component: 2400 - total flux cleaned = 0.00232131 Jy ! Component: 2450 - total flux cleaned = 0.00233636 Jy ! Component: 2500 - total flux cleaned = 0.00238085 Jy ! Component: 2550 - total flux cleaned = 0.00245491 Jy ! Component: 2600 - total flux cleaned = 0.00246964 Jy ! Component: 2650 - total flux cleaned = 0.0025135 Jy ! Component: 2700 - total flux cleaned = 0.00260037 Jy ! Component: 2750 - total flux cleaned = 0.00260033 Jy ! Component: 2800 - total flux cleaned = 0.00264337 Jy ! Component: 2850 - total flux cleaned = 0.00264323 Jy ! Component: 2900 - total flux cleaned = 0.0026998 Jy ! Component: 2950 - total flux cleaned = 0.00269956 Jy ! Component: 3000 - total flux cleaned = 0.00265781 Jy ! Component: 3050 - total flux cleaned = 0.00274105 Jy ! Component: 3100 - total flux cleaned = 0.00279613 Jy ! Component: 3150 - total flux cleaned = 0.00282357 Jy ! Component: 3200 - total flux cleaned = 0.00283716 Jy ! Component: 3250 - total flux cleaned = 0.0028236 Jy ! Component: 3300 - total flux cleaned = 0.00277003 Jy ! Component: 3350 - total flux cleaned = 0.00278351 Jy ! Component: 3400 - total flux cleaned = 0.00279687 Jy ! Component: 3450 - total flux cleaned = 0.00274431 Jy ! Component: 3500 - total flux cleaned = 0.00274444 Jy ! Component: 3550 - total flux cleaned = 0.00274443 Jy ! Component: 3600 - total flux cleaned = 0.0027575 Jy ! Component: 3650 - total flux cleaned = 0.00277044 Jy ! Component: 3700 - total flux cleaned = 0.00280896 Jy ! Component: 3750 - total flux cleaned = 0.00288532 Jy ! Component: 3800 - total flux cleaned = 0.00291058 Jy ! Component: 3850 - total flux cleaned = 0.00284768 Jy ! Component: 3900 - total flux cleaned = 0.00294798 Jy ! Component: 3950 - total flux cleaned = 0.00288574 Jy ! Component: 4000 - total flux cleaned = 0.00293541 Jy ! Component: 4050 - total flux cleaned = 0.00297248 Jy ! Total flux subtracted in 4096 components = 0.00294792 Jy ! Clean residual min=-0.000748 max=0.000660 Jy/beam ! Clean residual mean=-0.000000 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.128941 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 371 components and 0.128941 Jy ![Exited script file: muppet] wmap "J1420+1703_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 7.576 at -1.894 degrees (North through East) ! Clean map min=-0.0012332 max=0.12428 Jy/beam ! Writing clean map to FITS file: J1420+1703_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553768 0.553768 1.10754 2.21507 4.43014 8.86029 17.7206 35.4412 70.8823 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 7.576 at -1.894 degrees (North through East) ! Clean map min=-0.0012332 max=0.12428 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1420+1703_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:50:35 2019