! Started logfile: J1419-1928_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:34 2019 obs J1419-1928_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1419-1928_S_2017_05_01_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785673 visibilities/baseline/integration-bin. ! Found source: J1419-1928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 10748 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419-1928_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897359Jy sigma=0.027620 ! Fit after self-cal, rms=0.887014Jy sigma=0.027471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.484 mas, bpa=2.312 degrees ! Estimated noise=1134.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636267 Jy ! Component: 100 - total flux cleaned = 0.0861678 Jy ! Total flux subtracted in 100 components = 0.0861678 Jy ! Clean residual min=-0.022266 max=0.025094 Jy/beam ! Clean residual mean=-0.000009 rms=0.008086 Jy/beam ! Combined flux in latest and established models = 0.0861677 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0861677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119904Jy sigma=0.001968 ! Fit after self-cal, rms=0.119909Jy sigma=0.001965 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=8.809 mas, bpa=2.722 degrees ! Estimated noise=790.414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935048 Jy ! Component: 100 - total flux cleaned = 0.0101763 Jy ! Component: 150 - total flux cleaned = 0.0104123 Jy ! Component: 200 - total flux cleaned = 0.0108411 Jy ! Total flux subtracted in 200 components = 0.0108411 Jy ! Clean residual min=-0.025432 max=0.026928 Jy/beam ! Clean residual mean=-0.000013 rms=0.009639 Jy/beam ! Combined flux in latest and established models = 0.0970089 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0970089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115716Jy sigma=0.002174 ! Fit after self-cal, rms=0.115679Jy sigma=0.002173 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.64 FD 0.71 HN 1.04 KP 0.87 ! LA 0.78 MK 1.29 NL 1.03 OV 0.78 ! PT 0.82 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.73 HN 1.01 KP 0.81 ! LA 0.72 MK 1.25 NL 1.13 OV 0.84 ! PT 0.77 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.74 HN 1.04 KP 0.84 ! LA 0.76 MK 1.32 NL 1.11 OV 0.75 ! PT 0.77 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.81 HN 0.89 KP 1.00* ! LA 29.76 MK 1.30 NL 1.00* OV 1.00* ! PT 0.76 SC 1.00* ! ! ! Fit before self-cal, rms=0.115679Jy sigma=0.002173 ! Fit after self-cal, rms=0.086380Jy sigma=0.000692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=8.488 mas, bpa=5.793 degrees ! Estimated noise=794.108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490052 Jy ! Component: 100 - total flux cleaned = 0.00437158 Jy ! Component: 150 - total flux cleaned = 0.00436966 Jy ! Component: 200 - total flux cleaned = 0.00436937 Jy ! Total flux subtracted in 200 components = 0.00436937 Jy ! Clean residual min=-0.003852 max=0.004281 Jy/beam ! Clean residual mean=-0.000001 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.101378 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.101378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085534Jy sigma=0.000684 ! Fit after self-cal, rms=0.085632Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085632Jy sigma=0.000679 ! Fit after self-cal, rms=0.081326Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=8.412 mas, bpa=5.735 degrees ! Estimated noise=780.342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148591 Jy ! Component: 100 - total flux cleaned = 0.0013876 Jy ! Component: 150 - total flux cleaned = 0.0015462 Jy ! Component: 200 - total flux cleaned = 0.00160621 Jy ! Total flux subtracted in 200 components = 0.00160621 Jy ! Clean residual min=-0.003302 max=0.002967 Jy/beam ! Clean residual mean=0.000000 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.102984 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.102984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081061Jy sigma=0.000674 ! Fit after self-cal, rms=0.080986Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590576 Jy ! Component: 100 - total flux cleaned = 0.000589776 Jy ! Component: 150 - total flux cleaned = 0.000686967 Jy ! Component: 200 - total flux cleaned = 0.000732312 Jy ! Total flux subtracted in 200 components = 0.000732312 Jy ! Clean residual min=-0.002986 max=0.002969 Jy/beam ! Clean residual mean=0.000000 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.103717 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.103717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080896Jy sigma=0.000673 ! Fit after self-cal, rms=0.080883Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080883Jy sigma=0.000673 ! Fit after self-cal, rms=0.078318Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.73 mas, bmaj=8.373 mas, bpa=5.229 degrees ! Estimated noise=772.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579372 Jy ! Component: 100 - total flux cleaned = 0.000492303 Jy ! Component: 150 - total flux cleaned = 0.000626478 Jy ! Component: 200 - total flux cleaned = 0.000826023 Jy ! Total flux subtracted in 200 components = 0.000826023 Jy ! Clean residual min=-0.002528 max=0.002641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.104543 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.104543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078220Jy sigma=0.000671 ! Fit after self-cal, rms=0.078167Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057569 Jy ! Component: 100 - total flux cleaned = 0.00061038 Jy ! Component: 150 - total flux cleaned = 0.000545503 Jy ! Component: 200 - total flux cleaned = 0.000546386 Jy ! Total flux subtracted in 200 components = 0.000546386 Jy ! Clean residual min=-0.002403 max=0.002641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.105089 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.105089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078132Jy sigma=0.000671 ! Fit after self-cal, rms=0.078131Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078131Jy sigma=0.000670 ! Fit after self-cal, rms=0.077070Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.82 mas, bmaj=16.53 mas, bpa=7.249 degrees ! Estimated noise=863.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253144 Jy ! Component: 100 - total flux cleaned = 0.000324194 Jy ! Component: 150 - total flux cleaned = 0.000446893 Jy ! Component: 200 - total flux cleaned = 0.000497328 Jy ! Total flux subtracted in 200 components = 0.000497328 Jy ! Clean residual min=-0.002581 max=0.002675 Jy/beam ! Clean residual mean=-0.000003 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.105587 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.105587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077043Jy sigma=0.000670 ! Fit after self-cal, rms=0.077014Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.5154e-05 Jy ! Component: 100 - total flux cleaned = 4.87689e-05 Jy ! Component: 150 - total flux cleaned = 0.000161008 Jy ! Component: 200 - total flux cleaned = 0.000238243 Jy ! Total flux subtracted in 200 components = 0.000238243 Jy ! Clean residual min=-0.002496 max=0.002623 Jy/beam ! Clean residual mean=-0.000002 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.105825 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.105825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077009Jy sigma=0.000670 ! Fit after self-cal, rms=0.077008Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=8.351 mas, bpa=4.848 degrees ! Estimated noise=770.747 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.716 x 8.351 at 4.848 degrees (North through East) ! Clean map min=-0.0021693 max=0.07751 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=6.954 mas, bpa=4.325 degrees ! Estimated noise=1165.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652511 Jy ! Component: 100 - total flux cleaned = 0.0831642 Jy ! Component: 150 - total flux cleaned = 0.0921302 Jy ! Component: 200 - total flux cleaned = 0.0963686 Jy ! Total flux subtracted in 200 components = 0.0963686 Jy ! Clean residual min=-0.004087 max=0.004631 Jy/beam ! Clean residual mean=-0.000003 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.0963685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0963685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=8.351 mas, bpa=4.848 degrees ! Estimated noise=770.747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353475 Jy ! Component: 100 - total flux cleaned = 0.00454198 Jy ! Component: 150 - total flux cleaned = 0.00530653 Jy ! Component: 200 - total flux cleaned = 0.00597111 Jy ! Total flux subtracted in 200 components = 0.00597111 Jy ! Clean residual min=-0.002866 max=0.002953 Jy/beam ! Clean residual mean=0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.10234 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 0.10234 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.82 mas, bmaj=16.53 mas, bpa=7.249 degrees ! Estimated noise=863.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153191 Jy ! Component: 100 - total flux cleaned = 0.00234916 Jy ! Component: 150 - total flux cleaned = 0.00244097 Jy ! Component: 200 - total flux cleaned = 0.00249337 Jy ! Total flux subtracted in 200 components = 0.00249337 Jy ! Clean residual min=-0.002504 max=0.002879 Jy/beam ! Clean residual mean=-0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.104833 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89493e-05 Jy ! Component: 100 - total flux cleaned = 9.51608e-05 Jy ! Component: 150 - total flux cleaned = 0.000136708 Jy ! Component: 200 - total flux cleaned = 0.000175126 Jy ! Total flux subtracted in 200 components = 0.000175126 Jy ! Clean residual min=-0.002493 max=0.002825 Jy/beam ! Clean residual mean=-0.000002 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.105008 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.105008 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=8.351 mas, bpa=4.848 degrees ! Estimated noise=770.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167242 Jy ! Component: 100 - total flux cleaned = -0.000115668 Jy ! Component: 150 - total flux cleaned = 8.1149e-05 Jy ! Component: 200 - total flux cleaned = 0.000213048 Jy ! Total flux subtracted in 200 components = 0.000213048 Jy ! Clean residual min=-0.002484 max=0.002656 Jy/beam ! Clean residual mean=-0.000000 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.105221 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.105221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077045Jy sigma=0.000670 ! Fit after self-cal, rms=0.077049Jy sigma=0.000670 wmodel J1419-1928_S_2017_05_01_pus_map.mod ! Writing 67 model components to file: J1419-1928_S_2017_05_01_pus_map.mod wobs J1419-1928_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1419-1928_S_2017_05_01_pus_uvs.fits wwins J1419-1928_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1419-1928_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888316 Jy ! Component: 100 - total flux cleaned = 0.00106068 Jy ! Component: 150 - total flux cleaned = 0.00110015 Jy ! Component: 200 - total flux cleaned = 0.00113602 Jy ! Component: 250 - total flux cleaned = 0.00120747 Jy ! Component: 300 - total flux cleaned = 0.00131062 Jy ! Component: 350 - total flux cleaned = 0.00147677 Jy ! Component: 400 - total flux cleaned = 0.00160464 Jy ! Component: 450 - total flux cleaned = 0.00175987 Jy ! Component: 500 - total flux cleaned = 0.00194063 Jy ! Component: 550 - total flux cleaned = 0.00211523 Jy ! Component: 600 - total flux cleaned = 0.0022012 Jy ! Component: 650 - total flux cleaned = 0.00239633 Jy ! Component: 700 - total flux cleaned = 0.00247745 Jy ! Component: 750 - total flux cleaned = 0.00258377 Jy ! Component: 800 - total flux cleaned = 0.00261051 Jy ! Component: 850 - total flux cleaned = 0.00268733 Jy ! Component: 900 - total flux cleaned = 0.00271234 Jy ! Component: 950 - total flux cleaned = 0.00271239 Jy ! Component: 1000 - total flux cleaned = 0.0026885 Jy ! Component: 1050 - total flux cleaned = 0.00266554 Jy ! Component: 1100 - total flux cleaned = 0.00261969 Jy ! Component: 1150 - total flux cleaned = 0.00266497 Jy ! Component: 1200 - total flux cleaned = 0.00266479 Jy ! Component: 1250 - total flux cleaned = 0.00268614 Jy ! Component: 1300 - total flux cleaned = 0.0026212 Jy ! Component: 1350 - total flux cleaned = 0.00259949 Jy ! Component: 1400 - total flux cleaned = 0.00249556 Jy ! Component: 1450 - total flux cleaned = 0.00245443 Jy ! Component: 1500 - total flux cleaned = 0.00239378 Jy ! Component: 1550 - total flux cleaned = 0.00231447 Jy ! Component: 1600 - total flux cleaned = 0.00229484 Jy ! Component: 1650 - total flux cleaned = 0.00221767 Jy ! Component: 1700 - total flux cleaned = 0.00208528 Jy ! Component: 1750 - total flux cleaned = 0.00215992 Jy ! Component: 1800 - total flux cleaned = 0.00199344 Jy ! Component: 1850 - total flux cleaned = 0.00199321 Jy ! Component: 1900 - total flux cleaned = 0.00186757 Jy ! Component: 1950 - total flux cleaned = 0.00181458 Jy ! Component: 2000 - total flux cleaned = 0.00177965 Jy ! Component: 2050 - total flux cleaned = 0.001711 Jy ! Component: 2100 - total flux cleaned = 0.00167669 Jy ! Component: 2150 - total flux cleaned = 0.00157541 Jy ! Component: 2200 - total flux cleaned = 0.00154216 Jy ! Component: 2250 - total flux cleaned = 0.00149285 Jy ! Component: 2300 - total flux cleaned = 0.00144435 Jy ! Component: 2350 - total flux cleaned = 0.00142804 Jy ! Component: 2400 - total flux cleaned = 0.00134888 Jy ! Component: 2450 - total flux cleaned = 0.00138024 Jy ! Component: 2500 - total flux cleaned = 0.00138018 Jy ! Component: 2550 - total flux cleaned = 0.00131879 Jy ! Component: 2600 - total flux cleaned = 0.00127362 Jy ! Component: 2650 - total flux cleaned = 0.00125882 Jy ! Component: 2700 - total flux cleaned = 0.00119958 Jy ! Component: 2750 - total flux cleaned = 0.00122907 Jy ! Component: 2800 - total flux cleaned = 0.00118522 Jy ! Component: 2850 - total flux cleaned = 0.00112758 Jy ! Component: 2900 - total flux cleaned = 0.00112748 Jy ! Component: 2950 - total flux cleaned = 0.00108499 Jy ! Component: 3000 - total flux cleaned = 0.00109893 Jy ! Component: 3050 - total flux cleaned = 0.00108519 Jy ! Component: 3100 - total flux cleaned = 0.00107146 Jy ! Component: 3150 - total flux cleaned = 0.00100343 Jy ! Component: 3200 - total flux cleaned = 0.00104411 Jy ! Component: 3250 - total flux cleaned = 0.0010711 Jy ! Component: 3300 - total flux cleaned = 0.0010713 Jy ! Component: 3350 - total flux cleaned = 0.00111065 Jy ! Component: 3400 - total flux cleaned = 0.00109758 Jy ! Component: 3450 - total flux cleaned = 0.00112351 Jy ! Component: 3500 - total flux cleaned = 0.00114932 Jy ! Component: 3550 - total flux cleaned = 0.00116206 Jy ! Component: 3600 - total flux cleaned = 0.0012 Jy ! Component: 3650 - total flux cleaned = 0.00119994 Jy ! Component: 3700 - total flux cleaned = 0.00117496 Jy ! Component: 3750 - total flux cleaned = 0.00118733 Jy ! Component: 3800 - total flux cleaned = 0.00119973 Jy ! Component: 3850 - total flux cleaned = 0.00124873 Jy ! Component: 3900 - total flux cleaned = 0.00123662 Jy ! Component: 3950 - total flux cleaned = 0.0012368 Jy ! Component: 4000 - total flux cleaned = 0.00124878 Jy ! Component: 4050 - total flux cleaned = 0.00129633 Jy ! Total flux subtracted in 4096 components = 0.00128453 Jy ! Clean residual min=-0.000698 max=0.000705 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.106506 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 328 components and 0.106506 Jy ![Exited script file: muppet] wmap "J1419-1928_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.716 x 8.351 at 4.848 degrees (North through East) ! Clean map min=-0.0015089 max=0.076905 Jy/beam ! Writing clean map to FITS file: J1419-1928_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.076905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.830315 0.830315 1.66063 3.32126 6.64252 13.285 26.5701 53.1401 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.716 x 8.351 at 4.848 degrees (North through East) ! Clean map min=-0.0015089 max=0.076905 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419-1928_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:39 2019