! Started logfile: J1419+5423_X_2017_03_27_pus_uvs.log on Sat Apr 27 22:04:58 2019 obs J1419+5423_X_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1419+5423_X_2017_03_27_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789815 visibilities/baseline/integration-bin. ! Found source: J1419+5423 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1844 lines of history. ! ! Reading 10236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1419+5423_X_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.560884Jy sigma=0.004824 ! Fit after self-cal, rms=0.557398Jy sigma=0.004797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.8076 mas, bmaj=1.414 mas, bpa=22.51 degrees ! Estimated noise=1250.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.916182 Jy ! Component: 100 - total flux cleaned = 1.26623 Jy ! Total flux subtracted in 100 components = 1.26623 Jy ! Clean residual min=-0.065814 max=0.180778 Jy/beam ! Clean residual mean=-0.000282 rms=0.018770 Jy/beam ! Combined flux in latest and established models = 1.26623 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.26623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.374043Jy sigma=0.003174 ! Fit after self-cal, rms=0.363277Jy sigma=0.003105 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (1, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206194 Jy ! Component: 100 - total flux cleaned = 0.312901 Jy ! Total flux subtracted in 100 components = 0.312901 Jy ! Clean residual min=-0.031210 max=0.063834 Jy/beam ! Clean residual mean=-0.000047 rms=0.009064 Jy/beam ! Combined flux in latest and established models = 1.57913 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 1.57913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.197580Jy sigma=0.001608 ! Fit after self-cal, rms=0.183769Jy sigma=0.001514 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763162 Jy ! Component: 100 - total flux cleaned = 0.117408 Jy ! Total flux subtracted in 100 components = 0.117408 Jy ! Clean residual min=-0.028229 max=0.024466 Jy/beam ! Clean residual mean=0.000044 rms=0.005771 Jy/beam ! Combined flux in latest and established models = 1.69653 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 1.69653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146035Jy sigma=0.001170 ! Fit after self-cal, rms=0.141223Jy sigma=0.001137 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.041 mas, bmaj=1.66 mas, bpa=20.42 degrees ! Estimated noise=844.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347956 Jy ! Component: 100 - total flux cleaned = 0.0493409 Jy ! Component: 150 - total flux cleaned = 0.0523506 Jy ! Component: 200 - total flux cleaned = 0.0539253 Jy ! Total flux subtracted in 200 components = 0.0539253 Jy ! Clean residual min=-0.021680 max=0.017367 Jy/beam ! Clean residual mean=0.000189 rms=0.004007 Jy/beam ! Combined flux in latest and established models = 1.75046 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 1.75046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132163Jy sigma=0.001061 ! Fit after self-cal, rms=0.131092Jy sigma=0.001055 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.04 KP 1.03 ! LA 0.99 MK 0.99 NL 0.96 OV 0.99 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.01 KP 1.05 ! LA 1.00 MK 0.98 NL 0.96 OV 0.99 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 0.99 ! LA 1.02 MK 0.99 NL 0.96 OV 0.99 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.03 KP 1.02 ! LA 1.03 MK 1.01 NL 0.96 OV 0.99 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.99 KP 1.03 ! LA 1.02 MK 1.01 NL 0.95 OV 0.99 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.02 KP 1.02 ! LA 1.02 MK 0.99 NL 0.95 OV 1.00 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.03 KP 1.01 ! LA 1.03 MK 1.00 NL 0.96 OV 1.00 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 1.02 ! LA 1.01 MK 0.99 NL 0.97 OV 0.99 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 1.02 ! LA 1.03 MK 0.97 NL 0.96 OV 0.99 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.06 KP 0.92 ! LA 1.04 MK 0.98 NL 0.85 OV 1.08 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.12 KP 1.03 ! LA 1.10 MK 1.04 NL 0.91 OV 1.14 ! PT 1.12 SC 1.07 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.08 KP 1.04 ! LA 1.05 MK 0.95 NL 0.88 OV 1.10 ! PT 1.08 SC 1.04 ! ! ! Fit before self-cal, rms=0.131092Jy sigma=0.001055 ! Fit after self-cal, rms=0.096039Jy sigma=0.000727 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.048 mas, bmaj=1.666 mas, bpa=20.34 degrees ! Estimated noise=843.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647812 Jy ! Component: 100 - total flux cleaned = 0.00706428 Jy ! Component: 150 - total flux cleaned = 0.00724269 Jy ! Component: 200 - total flux cleaned = 0.0074028 Jy ! Total flux subtracted in 200 components = 0.0074028 Jy ! Clean residual min=-0.008098 max=0.007093 Jy/beam ! Clean residual mean=0.000035 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 1.75786 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 1.75786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093851Jy sigma=0.000709 ! Fit after self-cal, rms=0.093034Jy sigma=0.000704 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093034Jy sigma=0.000704 ! Fit after self-cal, rms=0.090784Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.047 mas, bmaj=1.667 mas, bpa=20.43 degrees ! Estimated noise=842.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320206 Jy ! Component: 100 - total flux cleaned = 0.00341405 Jy ! Component: 150 - total flux cleaned = 0.00357952 Jy ! Component: 200 - total flux cleaned = 0.00358982 Jy ! Total flux subtracted in 200 components = 0.00358982 Jy ! Clean residual min=-0.005415 max=0.004451 Jy/beam ! Clean residual mean=0.000011 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 1.76145 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 1.76145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089853Jy sigma=0.000673 ! Fit after self-cal, rms=0.089466Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682641 Jy ! Component: 100 - total flux cleaned = 0.0008356 Jy ! Component: 150 - total flux cleaned = 0.0010705 Jy ! Component: 200 - total flux cleaned = 0.00116465 Jy ! Total flux subtracted in 200 components = 0.00116465 Jy ! Clean residual min=-0.004605 max=0.004342 Jy/beam ! Clean residual mean=0.000013 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 1.76262 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 1.76262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088987Jy sigma=0.000666 ! Fit after self-cal, rms=0.088748Jy sigma=0.000665 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088748Jy sigma=0.000665 ! Fit after self-cal, rms=0.088513Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.048 mas, bmaj=1.667 mas, bpa=20.53 degrees ! Estimated noise=842.389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182329 Jy ! Component: 100 - total flux cleaned = 0.00221786 Jy ! Component: 150 - total flux cleaned = 0.00243444 Jy ! Component: 200 - total flux cleaned = 0.00261086 Jy ! Total flux subtracted in 200 components = 0.00261086 Jy ! Clean residual min=-0.003959 max=0.004182 Jy/beam ! Clean residual mean=0.000006 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 1.76523 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 1.76523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088136Jy sigma=0.000660 ! Fit after self-cal, rms=0.087982Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263534 Jy ! Component: 100 - total flux cleaned = 0.000471077 Jy ! Component: 150 - total flux cleaned = 0.000637175 Jy ! Component: 200 - total flux cleaned = 0.000777501 Jy ! Total flux subtracted in 200 components = 0.000777501 Jy ! Clean residual min=-0.003445 max=0.004172 Jy/beam ! Clean residual mean=0.000008 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 1.76601 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 1.76601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087753Jy sigma=0.000657 ! Fit after self-cal, rms=0.087654Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (10, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246342 Jy ! Component: 100 - total flux cleaned = 0.00440697 Jy ! Component: 150 - total flux cleaned = 0.00586552 Jy ! Component: 200 - total flux cleaned = 0.00676326 Jy ! Total flux subtracted in 200 components = 0.00676326 Jy ! Clean residual min=-0.002993 max=0.003090 Jy/beam ! Clean residual mean=0.000014 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 1.77277 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 1.77277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087364Jy sigma=0.000654 ! Fit after self-cal, rms=0.087314Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087314Jy sigma=0.000653 ! Fit after self-cal, rms=0.087186Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.383 mas, bmaj=2.516 mas, bpa=21.39 degrees ! Estimated noise=1012.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381533 Jy ! Component: 100 - total flux cleaned = 0.00526009 Jy ! Component: 150 - total flux cleaned = 0.00636245 Jy ! Component: 200 - total flux cleaned = 0.00721295 Jy ! Total flux subtracted in 200 components = 0.00721295 Jy ! Clean residual min=-0.002378 max=0.003767 Jy/beam ! Clean residual mean=0.000046 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 1.77998 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 88 components and 1.77998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087077Jy sigma=0.000652 ! Fit after self-cal, rms=0.087046Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.14269e-05 Jy ! Component: 100 - total flux cleaned = 0.000563104 Jy ! Component: 150 - total flux cleaned = 0.00111759 Jy ! Component: 200 - total flux cleaned = 0.00126055 Jy ! Total flux subtracted in 200 components = 0.00126055 Jy ! Clean residual min=-0.002196 max=0.003659 Jy/beam ! Clean residual mean=0.000049 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 1.78124 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 1.78124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086984Jy sigma=0.000651 ! Fit after self-cal, rms=0.086956Jy sigma=0.000651 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (14.2, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036182 Jy ! Component: 100 - total flux cleaned = 0.00544454 Jy ! Component: 150 - total flux cleaned = 0.00669484 Jy ! Component: 200 - total flux cleaned = 0.00776827 Jy ! Total flux subtracted in 200 components = 0.00776827 Jy ! Clean residual min=-0.002233 max=0.002241 Jy/beam ! Clean residual mean=0.000043 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 1.78901 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 1.78901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086816Jy sigma=0.000650 ! Fit after self-cal, rms=0.086805Jy sigma=0.000650 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.048 mas, bmaj=1.667 mas, bpa=20.56 degrees ! Estimated noise=842.235 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.667 at 20.56 degrees (North through East) ! Clean map min=-0.0024091 max=1.1583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086805Jy sigma=0.000650 ! Fit after self-cal, rms=0.081642Jy sigma=0.000605 ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.049 mas, bmaj=1.668 mas, bpa=20.52 degrees ! Estimated noise=842.958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115892 Jy ! Component: 100 - total flux cleaned = 0.00203579 Jy ! Component: 150 - total flux cleaned = 0.00249155 Jy ! Component: 200 - total flux cleaned = 0.00290971 Jy ! Total flux subtracted in 200 components = 0.00290971 Jy ! Clean residual min=-0.002275 max=0.002221 Jy/beam ! Clean residual mean=0.000012 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 1.79192 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 138 components and 1.79192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081522Jy sigma=0.000604 ! Fit after self-cal, rms=0.081508Jy sigma=0.000603 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116748 Jy ! Component: 100 - total flux cleaned = 0.000569721 Jy ! Component: 150 - total flux cleaned = 0.00082578 Jy ! Component: 200 - total flux cleaned = 0.00111599 Jy ! Total flux subtracted in 200 components = 0.00111599 Jy ! Clean residual min=-0.002147 max=0.002146 Jy/beam ! Clean residual mean=0.000012 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 1.79304 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 151 components and 1.79304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081430Jy sigma=0.000603 ! Fit after self-cal, rms=0.081420Jy sigma=0.000603 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081420Jy sigma=0.000603 ! Fit after self-cal, rms=0.081377Jy sigma=0.000603 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.8133 mas, bmaj=1.424 mas, bpa=22.48 degrees ! Estimated noise=1251.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.921544 Jy ! Component: 100 - total flux cleaned = 1.30856 Jy ! Component: 150 - total flux cleaned = 1.50903 Jy ! Component: 200 - total flux cleaned = 1.61419 Jy ! Total flux subtracted in 200 components = 1.61419 Jy ! Clean residual min=-0.014198 max=0.050018 Jy/beam ! Clean residual mean=-0.000111 rms=0.005015 Jy/beam ! Combined flux in latest and established models = 1.61419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.61419 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.049 mas, bmaj=1.668 mas, bpa=20.52 degrees ! Estimated noise=842.742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0717419 Jy ! Component: 100 - total flux cleaned = 0.107156 Jy ! Component: 150 - total flux cleaned = 0.127549 Jy ! Component: 200 - total flux cleaned = 0.140162 Jy ! Total flux subtracted in 200 components = 0.140162 Jy ! Clean residual min=-0.003522 max=0.006540 Jy/beam ! Clean residual mean=-0.000030 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 1.75435 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 1.75435 Jy ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008054 Jy ! Component: 100 - total flux cleaned = 0.013728 Jy ! Component: 150 - total flux cleaned = 0.0181119 Jy ! Component: 200 - total flux cleaned = 0.021698 Jy ! Total flux subtracted in 200 components = 0.021698 Jy ! Clean residual min=-0.002751 max=0.002663 Jy/beam ! Clean residual mean=0.000005 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 1.77605 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 57 components and 1.77605 Jy ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.382 mas, bmaj=2.516 mas, bpa=21.24 degrees ! Estimated noise=1013.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399783 Jy ! Component: 100 - total flux cleaned = 0.00706755 Jy ! Component: 150 - total flux cleaned = 0.00956737 Jy ! Component: 200 - total flux cleaned = 0.0116269 Jy ! Total flux subtracted in 200 components = 0.0116269 Jy ! Clean residual min=-0.002027 max=0.001973 Jy/beam ! Clean residual mean=0.000022 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 1.78768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172463 Jy ! Component: 100 - total flux cleaned = 0.00320058 Jy ! Component: 150 - total flux cleaned = 0.00448961 Jy ! Component: 200 - total flux cleaned = 0.00562792 Jy ! Total flux subtracted in 200 components = 0.00562792 Jy ! Clean residual min=-0.001991 max=0.001689 Jy/beam ! Clean residual mean=0.000025 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 1.7933 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 133 components and 1.7933 Jy ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=1.049 mas, bmaj=1.668 mas, bpa=20.52 degrees ! Estimated noise=842.742 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522684 Jy ! Component: 100 - total flux cleaned = -0.000104844 Jy ! Component: 150 - total flux cleaned = 0.000272872 Jy ! Component: 200 - total flux cleaned = 0.000757997 Jy ! Total flux subtracted in 200 components = 0.000757997 Jy ! Clean residual min=-0.002401 max=0.002239 Jy/beam ! Clean residual mean=0.000014 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 1.79406 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 145 components and 1.79406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081586Jy sigma=0.000603 ! Fit after self-cal, rms=0.081512Jy sigma=0.000603 wmodel J1419+5423_X_2017_03_27_pus_map.mod ! Writing 145 model components to file: J1419+5423_X_2017_03_27_pus_map.mod wobs J1419+5423_X_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1419+5423_X_2017_03_27_pus_uvs.fits wwins J1419+5423_X_2017_03_27_pus_map.win ! wwins: Wrote 4 windows to J1419+5423_X_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031498 Jy ! Component: 100 - total flux cleaned = -0.000550748 Jy ! Component: 150 - total flux cleaned = -0.000848994 Jy ! Component: 200 - total flux cleaned = -0.00110008 Jy ! Component: 250 - total flux cleaned = -0.00116845 Jy ! Component: 300 - total flux cleaned = -0.00123605 Jy ! Component: 350 - total flux cleaned = -0.00136709 Jy ! Component: 400 - total flux cleaned = -0.00139874 Jy ! Component: 450 - total flux cleaned = -0.00142984 Jy ! Component: 500 - total flux cleaned = -0.00142943 Jy ! Component: 550 - total flux cleaned = -0.00148961 Jy ! Component: 600 - total flux cleaned = -0.00151907 Jy ! Component: 650 - total flux cleaned = -0.00154863 Jy ! Component: 700 - total flux cleaned = -0.00163431 Jy ! Component: 750 - total flux cleaned = -0.00166198 Jy ! Component: 800 - total flux cleaned = -0.00174471 Jy ! Component: 850 - total flux cleaned = -0.00171723 Jy ! Component: 900 - total flux cleaned = -0.00174445 Jy ! Component: 950 - total flux cleaned = -0.00182417 Jy ! Component: 1000 - total flux cleaned = -0.0018243 Jy ! Component: 1050 - total flux cleaned = -0.00190195 Jy ! Component: 1100 - total flux cleaned = -0.00182522 Jy ! Component: 1150 - total flux cleaned = -0.00192635 Jy ! Component: 1200 - total flux cleaned = -0.00190099 Jy ! Component: 1250 - total flux cleaned = -0.00187636 Jy ! Component: 1300 - total flux cleaned = -0.00194921 Jy ! Component: 1350 - total flux cleaned = -0.00185213 Jy ! Component: 1400 - total flux cleaned = -0.00182815 Jy ! Component: 1450 - total flux cleaned = -0.00180456 Jy ! Component: 1500 - total flux cleaned = -0.00185121 Jy ! Component: 1550 - total flux cleaned = -0.00182824 Jy ! Component: 1600 - total flux cleaned = -0.00189706 Jy ! Component: 1650 - total flux cleaned = -0.00191974 Jy ! Component: 1700 - total flux cleaned = -0.0019418 Jy ! Component: 1750 - total flux cleaned = -0.00191941 Jy ! Component: 1800 - total flux cleaned = -0.00189746 Jy ! Component: 1850 - total flux cleaned = -0.00194126 Jy ! Component: 1900 - total flux cleaned = -0.00194132 Jy ! Component: 1950 - total flux cleaned = -0.00200582 Jy ! Component: 2000 - total flux cleaned = -0.00206939 Jy ! Total flux subtracted in 2048 components = -0.00213245 Jy ! Clean residual min=-0.001249 max=0.001304 Jy/beam ! Clean residual mean=0.000007 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 1.79193 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 290 components and 1.79193 Jy ![Exited script file: muppet] wmap "J1419+5423_X_2017_03_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.668 at 20.52 degrees (North through East) ! Clean map min=-0.0017618 max=1.1577 Jy/beam ! Writing clean map to FITS file: J1419+5423_X_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.15765 invert ! Inverting map ! Your choice of large map pixels excluded 0.117% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000378744 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0981499 0.0981499 0.1963 0.392599 0.785199 1.5704 3.1408 6.28159 12.5632 25.1264 50.2527 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.157 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.049 x 1.668 at 20.52 degrees (North through East) ! Clean map min=-0.0017618 max=1.1577 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+5423_X_2017_03_27_pus_uvs.log closed on Sat Apr 27 22:05:00 2019