! Started logfile: J1419+5423_S_2017_07_09_pus_uvs.log on Wed May 8 14:50:26 2019 obs J1419+5423_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1419+5423_S_2017_07_09_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873333 visibilities/baseline/integration-bin. ! Found source: J1419+5423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+5423_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.626080Jy sigma=0.005167 ! Fit after self-cal, rms=0.606621Jy sigma=0.004966 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=9.868 mas, bpa=-58 degrees ! Estimated noise=2907.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1914 Jy ! Component: 100 - total flux cleaned = 1.45128 Jy ! Total flux subtracted in 100 components = 1.45128 Jy ! Clean residual min=-0.041537 max=0.073990 Jy/beam ! Clean residual mean=-0.000127 rms=0.012856 Jy/beam ! Combined flux in latest and established models = 1.45128 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.45128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261065Jy sigma=0.002023 ! Fit after self-cal, rms=0.261063Jy sigma=0.002023 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=10.36 mas, bpa=-58.14 degrees ! Estimated noise=2327.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0719844 Jy ! Component: 100 - total flux cleaned = 0.100728 Jy ! Component: 150 - total flux cleaned = 0.114056 Jy ! Component: 200 - total flux cleaned = 0.11895 Jy ! Total flux subtracted in 200 components = 0.11895 Jy ! Clean residual min=-0.038182 max=0.037621 Jy/beam ! Clean residual mean=0.000118 rms=0.007186 Jy/beam ! Combined flux in latest and established models = 1.57023 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 26 components and 1.57023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234731Jy sigma=0.001904 ! Fit after self-cal, rms=0.234695Jy sigma=0.001904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 0.96 KP 1.03 ! LA 1.00* MK 1.01 NL 0.90 OV 1.03 ! PT 1.04 SC 0.77 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.01 KP 0.99 ! LA 0.98 MK 1.01 NL 1.06 OV 1.06 ! PT 1.01 SC 1.40 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 1.00 KP 0.98 ! LA 0.99 MK 1.02 NL 1.02 OV 0.98 ! PT 1.00 SC 0.82 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.02 KP 1.00* ! LA 1.03 MK 1.00* NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.234695Jy sigma=0.001904 ! Fit after self-cal, rms=0.083338Jy sigma=0.000735 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=10.29 mas, bpa=-58.14 degrees ! Estimated noise=2325.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178891 Jy ! Component: 100 - total flux cleaned = 0.0281463 Jy ! Component: 150 - total flux cleaned = 0.0331611 Jy ! Component: 200 - total flux cleaned = 0.0375406 Jy ! Total flux subtracted in 200 components = 0.0375406 Jy ! Clean residual min=-0.007832 max=0.009815 Jy/beam ! Clean residual mean=0.000044 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 1.60777 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 65 components and 1.60777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078918Jy sigma=0.000693 ! Fit after self-cal, rms=0.078842Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078842Jy sigma=0.000692 ! Fit after self-cal, rms=0.078624Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=10.28 mas, bpa=-58.16 degrees ! Estimated noise=2322.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524302 Jy ! Component: 100 - total flux cleaned = 0.00810026 Jy ! Component: 150 - total flux cleaned = 0.0105876 Jy ! Component: 200 - total flux cleaned = 0.0124685 Jy ! Total flux subtracted in 200 components = 0.0124685 Jy ! Clean residual min=-0.006718 max=0.008970 Jy/beam ! Clean residual mean=0.000038 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 1.62024 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 89 components and 1.62024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077790Jy sigma=0.000683 ! Fit after self-cal, rms=0.077789Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, 108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683139 Jy ! Component: 100 - total flux cleaned = 0.00843884 Jy ! Component: 150 - total flux cleaned = 0.00903884 Jy ! Component: 200 - total flux cleaned = 0.00956125 Jy ! Total flux subtracted in 200 components = 0.00956125 Jy ! Clean residual min=-0.005730 max=0.006243 Jy/beam ! Clean residual mean=-0.000005 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 1.6298 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 118 components and 1.6298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076742Jy sigma=0.000674 ! Fit after self-cal, rms=0.076718Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076718Jy sigma=0.000674 ! Fit after self-cal, rms=0.076590Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=10.28 mas, bpa=-58.18 degrees ! Estimated noise=2321.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020187 Jy ! Component: 100 - total flux cleaned = 0.00238127 Jy ! Component: 150 - total flux cleaned = 0.0025963 Jy ! Component: 200 - total flux cleaned = 0.00259352 Jy ! Total flux subtracted in 200 components = 0.00259352 Jy ! Clean residual min=-0.004956 max=0.005413 Jy/beam ! Clean residual mean=0.000000 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 1.63239 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 137 components and 1.63239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076266Jy sigma=0.000670 ! Fit after self-cal, rms=0.076262Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000871026 Jy ! Component: 100 - total flux cleaned = -0.00103948 Jy ! Component: 150 - total flux cleaned = -0.00103922 Jy ! Component: 200 - total flux cleaned = -0.00118951 Jy ! Total flux subtracted in 200 components = -0.00118951 Jy ! Clean residual min=-0.004619 max=0.005192 Jy/beam ! Clean residual mean=-0.000004 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 1.63121 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 157 components and 1.63121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076114Jy sigma=0.000669 ! Fit after self-cal, rms=0.076111Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076111Jy sigma=0.000669 ! Fit after self-cal, rms=0.076080Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.317 mas, bmaj=11.5 mas, bpa=-69.87 degrees ! Estimated noise=2851.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343308 Jy ! Component: 100 - total flux cleaned = 0.00459191 Jy ! Component: 150 - total flux cleaned = 0.00475149 Jy ! Component: 200 - total flux cleaned = 0.00475351 Jy ! Total flux subtracted in 200 components = 0.00475351 Jy ! Clean residual min=-0.005100 max=0.005854 Jy/beam ! Clean residual mean=-0.000012 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 1.63596 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 172 components and 1.63596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075985Jy sigma=0.000668 ! Fit after self-cal, rms=0.075970Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364325 Jy ! Component: 100 - total flux cleaned = 0.00311425 Jy ! Component: 150 - total flux cleaned = 0.00277205 Jy ! Component: 200 - total flux cleaned = 0.00282848 Jy ! Total flux subtracted in 200 components = 0.00282848 Jy ! Clean residual min=-0.004439 max=0.003359 Jy/beam ! Clean residual mean=0.000017 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 1.63879 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 199 components and 1.63879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075761Jy sigma=0.000666 ! Fit after self-cal, rms=0.075745Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=10.27 mas, bpa=-58.19 degrees ! Estimated noise=2320.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 10.27 at -58.19 degrees (North through East) ! Clean map min=-0.0068438 max=1.5191 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075745Jy sigma=0.000666 ! Fit after self-cal, rms=0.067574Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=10.27 mas, bpa=-58.2 degrees ! Estimated noise=2321.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.19122e-05 Jy ! Component: 100 - total flux cleaned = 0.000454686 Jy ! Component: 150 - total flux cleaned = 0.000819682 Jy ! Component: 200 - total flux cleaned = 0.00102268 Jy ! Total flux subtracted in 200 components = 0.00102268 Jy ! Clean residual min=-0.003625 max=0.003665 Jy/beam ! Clean residual mean=0.000000 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 1.63981 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 224 components and 1.63981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067408Jy sigma=0.000596 ! Fit after self-cal, rms=0.067407Jy sigma=0.000596 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193733 Jy ! Component: 100 - total flux cleaned = 0.000380697 Jy ! Component: 150 - total flux cleaned = 0.000556745 Jy ! Component: 200 - total flux cleaned = 0.000666189 Jy ! Total flux subtracted in 200 components = 0.000666189 Jy ! Clean residual min=-0.003570 max=0.003602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 1.64048 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 235 components and 1.64048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067315Jy sigma=0.000595 ! Fit after self-cal, rms=0.067315Jy sigma=0.000595 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067315Jy sigma=0.000595 ! Fit after self-cal, rms=0.067322Jy sigma=0.000595 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=9.833 mas, bpa=-58.02 degrees ! Estimated noise=2872.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17617 Jy ! Component: 100 - total flux cleaned = 1.43265 Jy ! Component: 150 - total flux cleaned = 1.49844 Jy ! Component: 200 - total flux cleaned = 1.52792 Jy ! Total flux subtracted in 200 components = 1.52792 Jy ! Clean residual min=-0.012922 max=0.016180 Jy/beam ! Clean residual mean=0.000011 rms=0.004040 Jy/beam ! Combined flux in latest and established models = 1.52792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.52792 Jy ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=10.27 mas, bpa=-58.2 degrees ! Estimated noise=2321.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230257 Jy ! Component: 100 - total flux cleaned = 0.0395795 Jy ! Component: 150 - total flux cleaned = 0.0523222 Jy ! Component: 200 - total flux cleaned = 0.0625784 Jy ! Total flux subtracted in 200 components = 0.0625784 Jy ! Clean residual min=-0.008013 max=0.010480 Jy/beam ! Clean residual mean=0.000054 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 1.5905 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 69 components and 1.5905 Jy ! Inverting map ! Added new window around map position (16, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101139 Jy ! Component: 100 - total flux cleaned = 0.0167346 Jy ! Component: 150 - total flux cleaned = 0.0222073 Jy ! Component: 200 - total flux cleaned = 0.0270228 Jy ! Total flux subtracted in 200 components = 0.0270228 Jy ! Clean residual min=-0.006062 max=0.005940 Jy/beam ! Clean residual mean=0.000006 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 1.61752 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 113 components and 1.61752 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=11.5 mas, bpa=-69.88 degrees ! Estimated noise=2853.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759391 Jy ! Component: 100 - total flux cleaned = 0.0135133 Jy ! Component: 150 - total flux cleaned = 0.0175549 Jy ! Component: 200 - total flux cleaned = 0.0191913 Jy ! Total flux subtracted in 200 components = 0.0191913 Jy ! Clean residual min=-0.005334 max=0.005197 Jy/beam ! Clean residual mean=-0.000037 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 1.63671 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114747 Jy ! Component: 100 - total flux cleaned = 0.00203683 Jy ! Component: 150 - total flux cleaned = 0.00272694 Jy ! Component: 200 - total flux cleaned = 0.00335373 Jy ! Total flux subtracted in 200 components = 0.00335373 Jy ! Clean residual min=-0.004284 max=0.004055 Jy/beam ! Clean residual mean=-0.000039 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 1.64006 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 181 components and 1.64007 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=10.27 mas, bpa=-58.2 degrees ! Estimated noise=2321.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000865471 Jy ! Component: 100 - total flux cleaned = -0.00061724 Jy ! Component: 150 - total flux cleaned = -0.000392241 Jy ! Component: 200 - total flux cleaned = -0.000288565 Jy ! Total flux subtracted in 200 components = -0.000288565 Jy ! Clean residual min=-0.003754 max=0.004089 Jy/beam ! Clean residual mean=-0.000025 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 1.63978 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 217 components and 1.63978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067740Jy sigma=0.000600 ! Fit after self-cal, rms=0.067702Jy sigma=0.000599 wmodel J1419+5423_S_2017_07_09_pus_map.mod ! Writing 217 model components to file: J1419+5423_S_2017_07_09_pus_map.mod wobs J1419+5423_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1419+5423_S_2017_07_09_pus_uvs.fits wwins J1419+5423_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J1419+5423_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102829 Jy ! Component: 100 - total flux cleaned = 0.00148621 Jy ! Component: 150 - total flux cleaned = 0.00185948 Jy ! Component: 200 - total flux cleaned = 0.00203791 Jy ! Component: 250 - total flux cleaned = 0.00197938 Jy ! Component: 300 - total flux cleaned = 0.00176247 Jy ! Component: 350 - total flux cleaned = 0.00181575 Jy ! Component: 400 - total flux cleaned = 0.00166336 Jy ! Component: 450 - total flux cleaned = 0.0014184 Jy ! Component: 500 - total flux cleaned = 0.00137132 Jy ! Component: 550 - total flux cleaned = 0.00109064 Jy ! Component: 600 - total flux cleaned = 0.00081838 Jy ! Component: 650 - total flux cleaned = 0.000509893 Jy ! Component: 700 - total flux cleaned = 0.000124804 Jy ! Component: 750 - total flux cleaned = -0.000125349 Jy ! Component: 800 - total flux cleaned = -0.00049226 Jy ! Component: 850 - total flux cleaned = -0.00080973 Jy ! Component: 900 - total flux cleaned = -0.00115873 Jy ! Component: 950 - total flux cleaned = -0.00149879 Jy ! Component: 1000 - total flux cleaned = -0.00168339 Jy ! Component: 1050 - total flux cleaned = -0.0019006 Jy ! Component: 1100 - total flux cleaned = -0.00228977 Jy ! Component: 1150 - total flux cleaned = -0.00246307 Jy ! Component: 1200 - total flux cleaned = -0.00287255 Jy ! Component: 1250 - total flux cleaned = -0.00310609 Jy ! Component: 1300 - total flux cleaned = -0.00333684 Jy ! Component: 1350 - total flux cleaned = -0.0034982 Jy ! Component: 1400 - total flux cleaned = -0.00368814 Jy ! Component: 1450 - total flux cleaned = -0.00387631 Jy ! Component: 1500 - total flux cleaned = -0.00415233 Jy ! Component: 1550 - total flux cleaned = -0.00424297 Jy ! Component: 1600 - total flux cleaned = -0.0043928 Jy ! Component: 1650 - total flux cleaned = -0.00474523 Jy ! Component: 1700 - total flux cleaned = -0.00491851 Jy ! Component: 1750 - total flux cleaned = -0.00514699 Jy ! Component: 1800 - total flux cleaned = -0.00534406 Jy ! Component: 1850 - total flux cleaned = -0.00553852 Jy ! Component: 1900 - total flux cleaned = -0.00564861 Jy ! Component: 1950 - total flux cleaned = -0.00581134 Jy ! Component: 2000 - total flux cleaned = -0.00581148 Jy ! Component: 2050 - total flux cleaned = -0.00583832 Jy ! Component: 2100 - total flux cleaned = -0.0058649 Jy ! Component: 2150 - total flux cleaned = -0.00594369 Jy ! Component: 2200 - total flux cleaned = -0.006099 Jy ! Component: 2250 - total flux cleaned = -0.00615025 Jy ! Component: 2300 - total flux cleaned = -0.00622654 Jy ! Component: 2350 - total flux cleaned = -0.00625152 Jy ! Component: 2400 - total flux cleaned = -0.00640186 Jy ! Component: 2450 - total flux cleaned = -0.00647582 Jy ! Component: 2500 - total flux cleaned = -0.00654946 Jy ! Component: 2550 - total flux cleaned = -0.00654924 Jy ! Component: 2600 - total flux cleaned = -0.00664616 Jy ! Component: 2650 - total flux cleaned = -0.00669431 Jy ! Component: 2700 - total flux cleaned = -0.00674209 Jy ! Component: 2750 - total flux cleaned = -0.00683694 Jy ! Component: 2800 - total flux cleaned = -0.00686065 Jy ! Component: 2850 - total flux cleaned = -0.00690753 Jy ! Component: 2900 - total flux cleaned = -0.0070009 Jy ! Component: 2950 - total flux cleaned = -0.00702391 Jy ! Component: 3000 - total flux cleaned = -0.00709302 Jy ! Component: 3050 - total flux cleaned = -0.00709295 Jy ! Component: 3100 - total flux cleaned = -0.00711595 Jy ! Component: 3150 - total flux cleaned = -0.00722995 Jy ! Component: 3200 - total flux cleaned = -0.00729791 Jy ! Component: 3250 - total flux cleaned = -0.00734293 Jy ! Component: 3300 - total flux cleaned = -0.00738791 Jy ! Component: 3350 - total flux cleaned = -0.0074552 Jy ! Component: 3400 - total flux cleaned = -0.007455 Jy ! Component: 3450 - total flux cleaned = -0.00752181 Jy ! Component: 3500 - total flux cleaned = -0.00752163 Jy ! Component: 3550 - total flux cleaned = -0.00752156 Jy ! Component: 3600 - total flux cleaned = -0.0074996 Jy ! Component: 3650 - total flux cleaned = -0.00754358 Jy ! Component: 3700 - total flux cleaned = -0.0075653 Jy ! Component: 3750 - total flux cleaned = -0.00749976 Jy ! Component: 3800 - total flux cleaned = -0.00754341 Jy ! Component: 3850 - total flux cleaned = -0.00747831 Jy ! Component: 3900 - total flux cleaned = -0.0075432 Jy ! Component: 3950 - total flux cleaned = -0.00752156 Jy ! Component: 4000 - total flux cleaned = -0.00747848 Jy ! Component: 4050 - total flux cleaned = -0.0075429 Jy ! Total flux subtracted in 4096 components = -0.00749999 Jy ! Clean residual min=-0.001314 max=0.001153 Jy/beam ! Clean residual mean=-0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 1.63228 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 476 components and 1.63228 Jy ![Exited script file: muppet] wmap "J1419+5423_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 10.27 at -58.2 degrees (North through East) ! Clean map min=-0.0041624 max=1.5179 Jy/beam ! Writing clean map to FITS file: J1419+5423_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.51794 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000363029 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0717478 0.0717478 0.143496 0.286991 0.573982 1.14796 2.29593 4.59186 9.18371 18.3674 36.7349 73.4697 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.517 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 10.27 at -58.2 degrees (North through East) ! Clean map min=-0.0041624 max=1.5179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+5423_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:50:30 2019