! Started logfile: J1419+3821_S_2017_10_09_pus_uvs.log on Sun May 12 13:14:07 2019 obs J1419+3821_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1419+3821_S_2017_10_09_pus_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.587963 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+3821_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694276Jy sigma=0.006392 ! Fit after self-cal, rms=0.691042Jy sigma=0.006363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=6.272 mas, bpa=-22.97 degrees ! Estimated noise=2193.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240947 Jy ! Component: 100 - total flux cleaned = 0.295812 Jy ! Total flux subtracted in 100 components = 0.295812 Jy ! Clean residual min=-0.015020 max=0.020633 Jy/beam ! Clean residual mean=0.000044 rms=0.004082 Jy/beam ! Combined flux in latest and established models = 0.295812 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.295812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109998Jy sigma=0.000895 ! Fit after self-cal, rms=0.109976Jy sigma=0.000895 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=6.97 mas, bpa=-21.32 degrees ! Estimated noise=1837.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022188 Jy ! Component: 100 - total flux cleaned = 0.0342056 Jy ! Component: 150 - total flux cleaned = 0.0417652 Jy ! Component: 200 - total flux cleaned = 0.0465651 Jy ! Total flux subtracted in 200 components = 0.0465651 Jy ! Clean residual min=-0.012803 max=0.019535 Jy/beam ! Clean residual mean=0.000005 rms=0.003913 Jy/beam ! Combined flux in latest and established models = 0.342377 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.342377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104558Jy sigma=0.000854 ! Fit after self-cal, rms=0.104538Jy sigma=0.000854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.97 KP 1.05 ! LA 1.00 MK 0.99 NL 1.01 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.01 KP 1.00 ! LA 0.98 MK 1.00 NL 1.89 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.07 HN 0.97 KP 0.91 ! LA 0.76 MK 1.04 NL 1.24 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.05 KP 1.00* ! LA 0.69 MK 1.22 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.104538Jy sigma=0.000854 ! Fit after self-cal, rms=0.091423Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=7.02 mas, bpa=-21.03 degrees ! Estimated noise=1850.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264036 Jy ! Component: 100 - total flux cleaned = -0.00297977 Jy ! Component: 150 - total flux cleaned = -0.00293626 Jy ! Component: 200 - total flux cleaned = -0.00290406 Jy ! Total flux subtracted in 200 components = -0.00290406 Jy ! Clean residual min=-0.009487 max=0.009425 Jy/beam ! Clean residual mean=-0.000021 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.339473 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.339473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091338Jy sigma=0.000708 ! Fit after self-cal, rms=0.091462Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091462Jy sigma=0.000708 ! Fit after self-cal, rms=0.087633Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=7.01 mas, bpa=-21.16 degrees ! Estimated noise=1850.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182251 Jy ! Component: 100 - total flux cleaned = -0.00217531 Jy ! Component: 150 - total flux cleaned = -0.00228582 Jy ! Component: 200 - total flux cleaned = -0.00235197 Jy ! Total flux subtracted in 200 components = -0.00235197 Jy ! Clean residual min=-0.004362 max=0.004295 Jy/beam ! Clean residual mean=-0.000004 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.337121 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.337121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087583Jy sigma=0.000647 ! Fit after self-cal, rms=0.087698Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78705e-05 Jy ! Component: 100 - total flux cleaned = -9.63466e-05 Jy ! Component: 150 - total flux cleaned = -0.000122986 Jy ! Component: 200 - total flux cleaned = -0.000148508 Jy ! Total flux subtracted in 200 components = -0.000148508 Jy ! Clean residual min=-0.004395 max=0.004268 Jy/beam ! Clean residual mean=-0.000004 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.336972 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.336972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087678Jy sigma=0.000647 ! Fit after self-cal, rms=0.087676Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087676Jy sigma=0.000647 ! Fit after self-cal, rms=0.087817Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=7.021 mas, bpa=-21.11 degrees ! Estimated noise=1849.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138327 Jy ! Component: 100 - total flux cleaned = -0.00163939 Jy ! Component: 150 - total flux cleaned = -0.00173284 Jy ! Component: 200 - total flux cleaned = -0.00179033 Jy ! Total flux subtracted in 200 components = -0.00179033 Jy ! Clean residual min=-0.004320 max=0.004178 Jy/beam ! Clean residual mean=-0.000004 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.335182 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.335182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087785Jy sigma=0.000646 ! Fit after self-cal, rms=0.087786Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.28229e-05 Jy ! Component: 100 - total flux cleaned = -0.000101414 Jy ! Component: 150 - total flux cleaned = -0.000146708 Jy ! Component: 200 - total flux cleaned = -0.000167645 Jy ! Total flux subtracted in 200 components = -0.000167645 Jy ! Clean residual min=-0.004355 max=0.004171 Jy/beam ! Clean residual mean=-0.000004 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.335014 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.335015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087771Jy sigma=0.000646 ! Fit after self-cal, rms=0.087770Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087770Jy sigma=0.000646 ! Fit after self-cal, rms=0.087842Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=9.634 mas, bpa=-10.42 degrees ! Estimated noise=2275.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135631 Jy ! Component: 100 - total flux cleaned = -0.00148296 Jy ! Component: 150 - total flux cleaned = -0.00150698 Jy ! Component: 200 - total flux cleaned = -0.00152792 Jy ! Total flux subtracted in 200 components = -0.00152792 Jy ! Clean residual min=-0.004650 max=0.004698 Jy/beam ! Clean residual mean=-0.000011 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.333487 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.333487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087838Jy sigma=0.000646 ! Fit after self-cal, rms=0.087837Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1238e-05 Jy ! Component: 100 - total flux cleaned = -4.56262e-05 Jy ! Component: 150 - total flux cleaned = -4.55981e-05 Jy ! Component: 200 - total flux cleaned = -4.65196e-05 Jy ! Total flux subtracted in 200 components = -4.65196e-05 Jy ! Clean residual min=-0.004648 max=0.004722 Jy/beam ! Clean residual mean=-0.000010 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.33344 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.33344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087839Jy sigma=0.000646 ! Fit after self-cal, rms=0.087838Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=7.03 mas, bpa=-21.05 degrees ! Estimated noise=1848.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.657 x 7.03 at -21.05 degrees (North through East) ! Clean map min=-0.0042326 max=0.30999 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=6.344 mas, bpa=-22.91 degrees ! Estimated noise=2202.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23965 Jy ! Component: 100 - total flux cleaned = 0.293334 Jy ! Component: 150 - total flux cleaned = 0.311257 Jy ! Component: 200 - total flux cleaned = 0.319322 Jy ! Total flux subtracted in 200 components = 0.319322 Jy ! Clean residual min=-0.005610 max=0.005687 Jy/beam ! Clean residual mean=0.000008 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.319322 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.319322 Jy ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=7.03 mas, bpa=-21.05 degrees ! Estimated noise=1848.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612445 Jy ! Component: 100 - total flux cleaned = 0.00936987 Jy ! Component: 150 - total flux cleaned = 0.0112695 Jy ! Component: 200 - total flux cleaned = 0.0124219 Jy ! Total flux subtracted in 200 components = 0.0124219 Jy ! Clean residual min=-0.004439 max=0.004141 Jy/beam ! Clean residual mean=-0.000003 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.331744 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 54 components and 0.331744 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=9.634 mas, bpa=-10.42 degrees ! Estimated noise=2275.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101862 Jy ! Component: 100 - total flux cleaned = 0.00112868 Jy ! Component: 150 - total flux cleaned = 0.00119117 Jy ! Component: 200 - total flux cleaned = 0.0012699 Jy ! Total flux subtracted in 200 components = 0.0012699 Jy ! Clean residual min=-0.004670 max=0.004607 Jy/beam ! Clean residual mean=-0.000010 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.333014 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84896e-05 Jy ! Component: 100 - total flux cleaned = 6.92123e-05 Jy ! Component: 150 - total flux cleaned = 7.85544e-05 Jy ! Component: 200 - total flux cleaned = 8.72014e-05 Jy ! Total flux subtracted in 200 components = 8.72014e-05 Jy ! Clean residual min=-0.004655 max=0.004624 Jy/beam ! Clean residual mean=-0.000010 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.333101 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.333101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=7.03 mas, bpa=-21.05 degrees ! Estimated noise=1848.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233432 Jy ! Component: 100 - total flux cleaned = 0.000106712 Jy ! Component: 150 - total flux cleaned = 6.31035e-05 Jy ! Component: 200 - total flux cleaned = 2.14554e-05 Jy ! Total flux subtracted in 200 components = 2.14554e-05 Jy ! Clean residual min=-0.004359 max=0.004050 Jy/beam ! Clean residual mean=-0.000004 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.333122 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.333122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087813Jy sigma=0.000646 ! Fit after self-cal, rms=0.087821Jy sigma=0.000646 wmodel J1419+3821_S_2017_10_09_pus_map.mod ! Writing 75 model components to file: J1419+3821_S_2017_10_09_pus_map.mod wobs J1419+3821_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1419+3821_S_2017_10_09_pus_uvs.fits wwins J1419+3821_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1419+3821_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283455 Jy ! Component: 100 - total flux cleaned = 0.000930691 Jy ! Component: 150 - total flux cleaned = 0.00133993 Jy ! Component: 200 - total flux cleaned = 0.00159792 Jy ! Component: 250 - total flux cleaned = 0.00172415 Jy ! Component: 300 - total flux cleaned = 0.00196313 Jy ! Component: 350 - total flux cleaned = 0.00196314 Jy ! Component: 400 - total flux cleaned = 0.00201989 Jy ! Component: 450 - total flux cleaned = 0.00212823 Jy ! Component: 500 - total flux cleaned = 0.00212768 Jy ! Component: 550 - total flux cleaned = 0.00223052 Jy ! Component: 600 - total flux cleaned = 0.00222989 Jy ! Component: 650 - total flux cleaned = 0.00237784 Jy ! Component: 700 - total flux cleaned = 0.00256891 Jy ! Component: 750 - total flux cleaned = 0.00256719 Jy ! Component: 800 - total flux cleaned = 0.00261323 Jy ! Component: 850 - total flux cleaned = 0.00252222 Jy ! Component: 900 - total flux cleaned = 0.0024786 Jy ! Component: 950 - total flux cleaned = 0.00252227 Jy ! Component: 1000 - total flux cleaned = 0.00247863 Jy ! Component: 1050 - total flux cleaned = 0.00243557 Jy ! Component: 1100 - total flux cleaned = 0.0023932 Jy ! Component: 1150 - total flux cleaned = 0.002434 Jy ! Component: 1200 - total flux cleaned = 0.00247392 Jy ! Component: 1250 - total flux cleaned = 0.00239422 Jy ! Component: 1300 - total flux cleaned = 0.00239455 Jy ! Component: 1350 - total flux cleaned = 0.00239466 Jy ! Component: 1400 - total flux cleaned = 0.00250864 Jy ! Component: 1450 - total flux cleaned = 0.00243279 Jy ! Component: 1500 - total flux cleaned = 0.00235878 Jy ! Component: 1550 - total flux cleaned = 0.00235896 Jy ! Component: 1600 - total flux cleaned = 0.00246613 Jy ! Component: 1650 - total flux cleaned = 0.00243038 Jy ! Component: 1700 - total flux cleaned = 0.00242955 Jy ! Component: 1750 - total flux cleaned = 0.00236048 Jy ! Component: 1800 - total flux cleaned = 0.00239442 Jy ! Component: 1850 - total flux cleaned = 0.00236139 Jy ! Component: 1900 - total flux cleaned = 0.00242739 Jy ! Component: 1950 - total flux cleaned = 0.00242716 Jy ! Component: 2000 - total flux cleaned = 0.00249149 Jy ! Component: 2050 - total flux cleaned = 0.00249131 Jy ! Component: 2100 - total flux cleaned = 0.00249114 Jy ! Component: 2150 - total flux cleaned = 0.00249114 Jy ! Component: 2200 - total flux cleaned = 0.00242973 Jy ! Component: 2250 - total flux cleaned = 0.00233877 Jy ! Component: 2300 - total flux cleaned = 0.00227937 Jy ! Component: 2350 - total flux cleaned = 0.0022198 Jy ! Component: 2400 - total flux cleaned = 0.00221939 Jy ! Component: 2450 - total flux cleaned = 0.0020448 Jy ! Component: 2500 - total flux cleaned = 0.00198689 Jy ! Component: 2550 - total flux cleaned = 0.00187277 Jy ! Component: 2600 - total flux cleaned = 0.00176007 Jy ! Component: 2650 - total flux cleaned = 0.00164872 Jy ! Component: 2700 - total flux cleaned = 0.0017041 Jy ! Component: 2750 - total flux cleaned = 0.00159431 Jy ! Component: 2800 - total flux cleaned = 0.00151272 Jy ! Component: 2850 - total flux cleaned = 0.00140541 Jy ! Component: 2900 - total flux cleaned = 0.00140536 Jy ! Component: 2950 - total flux cleaned = 0.00132617 Jy ! Component: 3000 - total flux cleaned = 0.00124815 Jy ! Component: 3050 - total flux cleaned = 0.00117076 Jy ! Component: 3100 - total flux cleaned = 0.00122233 Jy ! Component: 3150 - total flux cleaned = 0.00112067 Jy ! Component: 3200 - total flux cleaned = 0.00119609 Jy ! Component: 3250 - total flux cleaned = 0.00119596 Jy ! Component: 3300 - total flux cleaned = 0.0011463 Jy ! Component: 3350 - total flux cleaned = 0.00107259 Jy ! Component: 3400 - total flux cleaned = 0.00107268 Jy ! Component: 3450 - total flux cleaned = 0.00107239 Jy ! Component: 3500 - total flux cleaned = 0.000976439 Jy ! Component: 3550 - total flux cleaned = 0.00100011 Jy ! Component: 3600 - total flux cleaned = 0.00102348 Jy ! Component: 3650 - total flux cleaned = 0.000953126 Jy ! Component: 3700 - total flux cleaned = 0.000952949 Jy ! Component: 3750 - total flux cleaned = 0.000906805 Jy ! Component: 3800 - total flux cleaned = 0.000815251 Jy ! Component: 3850 - total flux cleaned = 0.000815446 Jy ! Component: 3900 - total flux cleaned = 0.00077037 Jy ! Component: 3950 - total flux cleaned = 0.000859747 Jy ! Component: 4000 - total flux cleaned = 0.000792941 Jy ! Component: 4050 - total flux cleaned = 0.000770679 Jy ! Total flux subtracted in 4096 components = 0.000792709 Jy ! Clean residual min=-0.001524 max=0.001181 Jy/beam ! Clean residual mean=0.000007 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.333915 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 351 components and 0.333915 Jy ![Exited script file: muppet] wmap "J1419+3821_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.657 x 7.03 at -21.05 degrees (North through East) ! Clean map min=-0.0038836 max=0.30975 Jy/beam ! Writing clean map to FITS file: J1419+3821_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.309747 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000398391 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385855 0.385855 0.77171 1.54342 3.08684 6.17368 12.3474 24.6947 49.3895 98.7789 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.309 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.657 x 7.03 at -21.05 degrees (North through East) ! Clean map min=-0.0038836 max=0.30975 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+3821_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:14:12 2019