! Started logfile: J1419+3821_S_2017_08_12_pus_uvs.log on Fri May 10 15:00:43 2019 obs J1419+3821_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1419+3821_S_2017_08_12_pus_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712281 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 2436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+3821_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.749344Jy sigma=0.007181 ! Fit after self-cal, rms=0.742953Jy sigma=0.007130 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.526 mas, bpa=-19.44 degrees ! Estimated noise=2203.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200098 Jy ! Component: 100 - total flux cleaned = 0.245265 Jy ! Total flux subtracted in 100 components = 0.245265 Jy ! Clean residual min=-0.010814 max=0.017167 Jy/beam ! Clean residual mean=0.000070 rms=0.003565 Jy/beam ! Combined flux in latest and established models = 0.245265 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.245265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090439Jy sigma=0.000802 ! Fit after self-cal, rms=0.090440Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.138 mas, bpa=-16.81 degrees ! Estimated noise=1855.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198662 Jy ! Component: 100 - total flux cleaned = 0.0299686 Jy ! Component: 150 - total flux cleaned = 0.0361749 Jy ! Component: 200 - total flux cleaned = 0.0402317 Jy ! Total flux subtracted in 200 components = 0.0402317 Jy ! Clean residual min=-0.007579 max=0.009652 Jy/beam ! Clean residual mean=0.000072 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.285497 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.285497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085888Jy sigma=0.000759 ! Fit after self-cal, rms=0.085894Jy sigma=0.000759 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00* HN 0.96 KP 1.01 ! LA 0.99 MK 1.03 NL 0.87 OV 0.99 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 0.95 ! LA 0.94 MK 1.01 NL 1.16 OV 1.10 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 0.93 ! LA 0.96 MK 1.03 NL 0.98 OV 0.91 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.00* ! LA 0.88 MK 1.19 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.085894Jy sigma=0.000759 ! Fit after self-cal, rms=0.084901Jy sigma=0.000707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.197 mas, bpa=-16.75 degrees ! Estimated noise=1858.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195107 Jy ! Component: 100 - total flux cleaned = 5.37998e-05 Jy ! Component: 150 - total flux cleaned = 5.19249e-05 Jy ! Component: 200 - total flux cleaned = 5.16445e-05 Jy ! Total flux subtracted in 200 components = 5.16445e-05 Jy ! Clean residual min=-0.006901 max=0.007320 Jy/beam ! Clean residual mean=0.000028 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.285549 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.285549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084770Jy sigma=0.000706 ! Fit after self-cal, rms=0.084797Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084797Jy sigma=0.000706 ! Fit after self-cal, rms=0.076717Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.216 mas, bpa=-16.73 degrees ! Estimated noise=1856.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123288 Jy ! Component: 100 - total flux cleaned = -0.00161839 Jy ! Component: 150 - total flux cleaned = -0.00178932 Jy ! Component: 200 - total flux cleaned = -0.00190676 Jy ! Total flux subtracted in 200 components = -0.00190676 Jy ! Clean residual min=-0.004481 max=0.005589 Jy/beam ! Clean residual mean=0.000022 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.283642 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.283642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076681Jy sigma=0.000643 ! Fit after self-cal, rms=0.076727Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (84, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500196 Jy ! Component: 100 - total flux cleaned = 0.00656026 Jy ! Component: 150 - total flux cleaned = 0.00701684 Jy ! Component: 200 - total flux cleaned = 0.00746421 Jy ! Total flux subtracted in 200 components = 0.00746421 Jy ! Clean residual min=-0.004321 max=0.004265 Jy/beam ! Clean residual mean=0.000020 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.291106 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 0.291106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076378Jy sigma=0.000640 ! Fit after self-cal, rms=0.076345Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076345Jy sigma=0.000639 ! Fit after self-cal, rms=0.076255Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.224 mas, bpa=-16.62 degrees ! Estimated noise=1852.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181855 Jy ! Component: 100 - total flux cleaned = 0.00209066 Jy ! Component: 150 - total flux cleaned = 0.00223211 Jy ! Component: 200 - total flux cleaned = 0.00236024 Jy ! Total flux subtracted in 200 components = 0.00236024 Jy ! Clean residual min=-0.004264 max=0.004020 Jy/beam ! Clean residual mean=0.000017 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.293467 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.293467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076191Jy sigma=0.000638 ! Fit after self-cal, rms=0.076185Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219065 Jy ! Component: 100 - total flux cleaned = 0.000332878 Jy ! Component: 150 - total flux cleaned = 0.000440441 Jy ! Component: 200 - total flux cleaned = 0.000508591 Jy ! Total flux subtracted in 200 components = 0.000508591 Jy ! Clean residual min=-0.004228 max=0.004017 Jy/beam ! Clean residual mean=0.000017 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.293975 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.293975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076158Jy sigma=0.000638 ! Fit after self-cal, rms=0.076155Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076155Jy sigma=0.000638 ! Fit after self-cal, rms=0.076123Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.987 mas, bmaj=11.33 mas, bpa=-25.83 degrees ! Estimated noise=2369.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706106 Jy ! Component: 100 - total flux cleaned = 0.000858488 Jy ! Component: 150 - total flux cleaned = 0.00103423 Jy ! Component: 200 - total flux cleaned = 0.0012177 Jy ! Total flux subtracted in 200 components = 0.0012177 Jy ! Clean residual min=-0.004480 max=0.005235 Jy/beam ! Clean residual mean=0.000039 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.295193 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.295193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076129Jy sigma=0.000638 ! Fit after self-cal, rms=0.076120Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.23624e-06 Jy ! Component: 100 - total flux cleaned = 9.33809e-05 Jy ! Component: 150 - total flux cleaned = 0.000263703 Jy ! Component: 200 - total flux cleaned = 0.000288211 Jy ! Total flux subtracted in 200 components = 0.000288211 Jy ! Clean residual min=-0.004432 max=0.005180 Jy/beam ! Clean residual mean=0.000039 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.295481 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 127 components and 0.295481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076133Jy sigma=0.000638 ! Fit after self-cal, rms=0.076130Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.226 mas, bpa=-16.61 degrees ! Estimated noise=1851.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.226 at -16.61 degrees (North through East) ! Clean map min=-0.0039257 max=0.26004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.622 mas, bpa=-19.27 degrees ! Estimated noise=2223.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201318 Jy ! Component: 100 - total flux cleaned = 0.246197 Jy ! Component: 150 - total flux cleaned = 0.262271 Jy ! Component: 200 - total flux cleaned = 0.270689 Jy ! Total flux subtracted in 200 components = 0.270689 Jy ! Clean residual min=-0.005929 max=0.006327 Jy/beam ! Clean residual mean=0.000021 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.270689 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.270689 Jy ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.226 mas, bpa=-16.61 degrees ! Estimated noise=1851.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614098 Jy ! Component: 100 - total flux cleaned = 0.010618 Jy ! Component: 150 - total flux cleaned = 0.014041 Jy ! Component: 200 - total flux cleaned = 0.0165468 Jy ! Total flux subtracted in 200 components = 0.0165468 Jy ! Clean residual min=-0.004722 max=0.004446 Jy/beam ! Clean residual mean=0.000025 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.287236 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.287236 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.987 mas, bmaj=11.33 mas, bpa=-25.83 degrees ! Estimated noise=2369.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038325 Jy ! Component: 100 - total flux cleaned = 0.00518673 Jy ! Component: 150 - total flux cleaned = 0.00549707 Jy ! Component: 200 - total flux cleaned = 0.00589765 Jy ! Total flux subtracted in 200 components = 0.00589765 Jy ! Clean residual min=-0.004576 max=0.005688 Jy/beam ! Clean residual mean=0.000046 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.293134 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346637 Jy ! Component: 100 - total flux cleaned = 0.000657332 Jy ! Component: 150 - total flux cleaned = 0.000888113 Jy ! Component: 200 - total flux cleaned = 0.00109546 Jy ! Total flux subtracted in 200 components = 0.00109546 Jy ! Clean residual min=-0.004483 max=0.005427 Jy/beam ! Clean residual mean=0.000044 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.294229 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 82 components and 0.294229 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=7.226 mas, bpa=-16.61 degrees ! Estimated noise=1851.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213282 Jy ! Component: 100 - total flux cleaned = 2.87257e-05 Jy ! Component: 150 - total flux cleaned = 0.000184426 Jy ! Component: 200 - total flux cleaned = 0.000231199 Jy ! Total flux subtracted in 200 components = 0.000231199 Jy ! Clean residual min=-0.004316 max=0.004039 Jy/beam ! Clean residual mean=0.000017 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.29446 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.29446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076161Jy sigma=0.000638 ! Fit after self-cal, rms=0.076158Jy sigma=0.000638 wmodel J1419+3821_S_2017_08_12_pus_map.mod ! Writing 101 model components to file: J1419+3821_S_2017_08_12_pus_map.mod wobs J1419+3821_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1419+3821_S_2017_08_12_pus_uvs.fits wwins J1419+3821_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1419+3821_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263925 Jy ! Component: 100 - total flux cleaned = 0.000363689 Jy ! Component: 150 - total flux cleaned = 0.000561658 Jy ! Component: 200 - total flux cleaned = 0.000562262 Jy ! Component: 250 - total flux cleaned = 0.00050006 Jy ! Component: 300 - total flux cleaned = 0.000439411 Jy ! Component: 350 - total flux cleaned = 0.000323831 Jy ! Component: 400 - total flux cleaned = 0.000266505 Jy ! Component: 450 - total flux cleaned = -8.01776e-07 Jy ! Component: 500 - total flux cleaned = -5.30188e-05 Jy ! Component: 550 - total flux cleaned = -0.000307077 Jy ! Component: 600 - total flux cleaned = -0.00050442 Jy ! Component: 650 - total flux cleaned = -0.000600055 Jy ! Component: 700 - total flux cleaned = -0.000553373 Jy ! Component: 750 - total flux cleaned = -0.000553666 Jy ! Component: 800 - total flux cleaned = -0.000464757 Jy ! Component: 850 - total flux cleaned = -0.000423195 Jy ! Component: 900 - total flux cleaned = -0.00042381 Jy ! Component: 950 - total flux cleaned = -0.000380512 Jy ! Component: 1000 - total flux cleaned = -0.000215197 Jy ! Component: 1050 - total flux cleaned = -1.36701e-05 Jy ! Component: 1100 - total flux cleaned = 2.59107e-05 Jy ! Component: 1150 - total flux cleaned = 0.000181245 Jy ! Component: 1200 - total flux cleaned = 0.000257351 Jy ! Component: 1250 - total flux cleaned = 0.000332571 Jy ! Component: 1300 - total flux cleaned = 0.000405579 Jy ! Component: 1350 - total flux cleaned = 0.000478257 Jy ! Component: 1400 - total flux cleaned = 0.000655454 Jy ! Component: 1450 - total flux cleaned = 0.000656267 Jy ! Component: 1500 - total flux cleaned = 0.000758918 Jy ! Component: 1550 - total flux cleaned = 0.000825779 Jy ! Component: 1600 - total flux cleaned = 0.000891783 Jy ! Component: 1650 - total flux cleaned = 0.000957362 Jy ! Component: 1700 - total flux cleaned = 0.000989159 Jy ! Component: 1750 - total flux cleaned = 0.00102162 Jy ! Component: 1800 - total flux cleaned = 0.00111448 Jy ! Component: 1850 - total flux cleaned = 0.00117589 Jy ! Component: 1900 - total flux cleaned = 0.00129655 Jy ! Component: 1950 - total flux cleaned = 0.00129635 Jy ! Component: 2000 - total flux cleaned = 0.00141325 Jy ! Component: 2050 - total flux cleaned = 0.00138404 Jy ! Component: 2100 - total flux cleaned = 0.00132672 Jy ! Component: 2150 - total flux cleaned = 0.00132709 Jy ! Component: 2200 - total flux cleaned = 0.00141062 Jy ! Component: 2250 - total flux cleaned = 0.00143743 Jy ! Component: 2300 - total flux cleaned = 0.00151892 Jy ! Component: 2350 - total flux cleaned = 0.00146542 Jy ! Component: 2400 - total flux cleaned = 0.00157199 Jy ! Component: 2450 - total flux cleaned = 0.00149322 Jy ! Component: 2500 - total flux cleaned = 0.00151942 Jy ! Component: 2550 - total flux cleaned = 0.00149397 Jy ! Component: 2600 - total flux cleaned = 0.00159501 Jy ! Component: 2650 - total flux cleaned = 0.00151973 Jy ! Component: 2700 - total flux cleaned = 0.0014951 Jy ! Component: 2750 - total flux cleaned = 0.00144612 Jy ! Component: 2800 - total flux cleaned = 0.00151874 Jy ! Component: 2850 - total flux cleaned = 0.00149453 Jy ! Component: 2900 - total flux cleaned = 0.00156575 Jy ! Component: 2950 - total flux cleaned = 0.00158899 Jy ! Component: 3000 - total flux cleaned = 0.00151945 Jy ! Component: 3050 - total flux cleaned = 0.00154236 Jy ! Component: 3100 - total flux cleaned = 0.0015424 Jy ! Component: 3150 - total flux cleaned = 0.00147542 Jy ! Component: 3200 - total flux cleaned = 0.0015424 Jy ! Component: 3250 - total flux cleaned = 0.00147659 Jy ! Component: 3300 - total flux cleaned = 0.00145501 Jy ! Component: 3350 - total flux cleaned = 0.00147688 Jy ! Component: 3400 - total flux cleaned = 0.00143383 Jy ! Component: 3450 - total flux cleaned = 0.00141241 Jy ! Component: 3500 - total flux cleaned = 0.00141228 Jy ! Component: 3550 - total flux cleaned = 0.00130772 Jy ! Component: 3600 - total flux cleaned = 0.00128697 Jy ! Component: 3650 - total flux cleaned = 0.00124604 Jy ! Component: 3700 - total flux cleaned = 0.00122575 Jy ! Component: 3750 - total flux cleaned = 0.00118543 Jy ! Component: 3800 - total flux cleaned = 0.00112556 Jy ! Component: 3850 - total flux cleaned = 0.00108588 Jy ! Component: 3900 - total flux cleaned = 0.00108595 Jy ! Component: 3950 - total flux cleaned = 0.000988227 Jy ! Component: 4000 - total flux cleaned = 0.000949249 Jy ! Component: 4050 - total flux cleaned = 0.000987793 Jy ! Total flux subtracted in 4096 components = 0.000910991 Jy ! Clean residual min=-0.001202 max=0.001105 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.295371 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 378 components and 0.295371 Jy ![Exited script file: muppet] wmap "J1419+3821_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.226 at -16.61 degrees (North through East) ! Clean map min=-0.0022834 max=0.26008 Jy/beam ! Writing clean map to FITS file: J1419+3821_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.260082 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329387 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.379942 0.379942 0.759884 1.51977 3.03954 6.07908 12.1582 24.3163 48.6326 97.2652 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 7.226 at -16.61 degrees (North through East) ! Clean map min=-0.0022834 max=0.26008 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+3821_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:00:47 2019