! Started logfile: J1419+3821_S_2017_01_21_pus_uvs.log on Sun May 5 15:55:54 2019 obs J1419+3821_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1419+3821_S_2017_01_21_pus_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.478009 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1419+3821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+3821_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.771091Jy sigma=0.006129 ! Fit after self-cal, rms=0.766946Jy sigma=0.006101 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=5.467 mas, bpa=-18 degrees ! Estimated noise=2899.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189216 Jy ! Component: 100 - total flux cleaned = 0.230543 Jy ! Total flux subtracted in 100 components = 0.230543 Jy ! Clean residual min=-0.011874 max=0.015304 Jy/beam ! Clean residual mean=-0.000002 rms=0.003033 Jy/beam ! Combined flux in latest and established models = 0.230543 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.230543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101269Jy sigma=0.000708 ! Fit after self-cal, rms=0.101270Jy sigma=0.000708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=6.196 mas, bpa=-15.47 degrees ! Estimated noise=2360.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138335 Jy ! Component: 100 - total flux cleaned = 0.0192693 Jy ! Component: 150 - total flux cleaned = 0.0191147 Jy ! Component: 200 - total flux cleaned = 0.0191089 Jy ! Total flux subtracted in 200 components = 0.0191089 Jy ! Clean residual min=-0.009857 max=0.010689 Jy/beam ! Clean residual mean=-0.000020 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.249652 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.249652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100182Jy sigma=0.000688 ! Fit after self-cal, rms=0.100186Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.88 LA 0.98 ! MK 0.96 NL 0.98 OV 1.14 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.99 LA 0.98 ! MK 0.95 NL 1.08 OV 1.19 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00 LA 0.96 ! MK 0.98 NL 1.09 OV 1.05 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.96 LA 1.08 ! MK 1.29 NL 1.00* OV 1.07 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.100186Jy sigma=0.000688 ! Fit after self-cal, rms=0.101912Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=6.172 mas, bpa=-15.72 degrees ! Estimated noise=2341.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107955 Jy ! Component: 100 - total flux cleaned = -0.00158813 Jy ! Component: 150 - total flux cleaned = -0.00153083 Jy ! Component: 200 - total flux cleaned = -0.00148285 Jy ! Total flux subtracted in 200 components = -0.00148285 Jy ! Clean residual min=-0.007402 max=0.008248 Jy/beam ! Clean residual mean=-0.000008 rms=0.002000 Jy/beam ! Combined flux in latest and established models = 0.248169 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.248169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101765Jy sigma=0.000661 ! Fit after self-cal, rms=0.102002Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102002Jy sigma=0.000660 ! Fit after self-cal, rms=0.110463Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=6.172 mas, bpa=-15.39 degrees ! Estimated noise=2349.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234358 Jy ! Component: 100 - total flux cleaned = -0.000440516 Jy ! Component: 150 - total flux cleaned = -0.000537726 Jy ! Component: 200 - total flux cleaned = -0.00053719 Jy ! Total flux subtracted in 200 components = -0.00053719 Jy ! Clean residual min=-0.006346 max=0.006088 Jy/beam ! Clean residual mean=0.000011 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.247632 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.247632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110407Jy sigma=0.000640 ! Fit after self-cal, rms=0.110552Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283785 Jy ! Component: 100 - total flux cleaned = 0.000260807 Jy ! Component: 150 - total flux cleaned = 0.000216427 Jy ! Component: 200 - total flux cleaned = 0.000174723 Jy ! Total flux subtracted in 200 components = 0.000174723 Jy ! Clean residual min=-0.006358 max=0.006159 Jy/beam ! Clean residual mean=0.000011 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.247806 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.247806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110531Jy sigma=0.000640 ! Fit after self-cal, rms=0.110531Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110531Jy sigma=0.000640 ! Fit after self-cal, rms=0.110706Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=6.169 mas, bpa=-15.39 degrees ! Estimated noise=2350.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.58894e-05 Jy ! Component: 100 - total flux cleaned = -7.40502e-05 Jy ! Component: 150 - total flux cleaned = -5.47567e-05 Jy ! Component: 200 - total flux cleaned = -5.52694e-05 Jy ! Total flux subtracted in 200 components = -5.52694e-05 Jy ! Clean residual min=-0.006437 max=0.006205 Jy/beam ! Clean residual mean=0.000013 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.247751 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.247751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110683Jy sigma=0.000640 ! Fit after self-cal, rms=0.110684Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.65656e-05 Jy ! Component: 100 - total flux cleaned = 3.53722e-05 Jy ! Component: 150 - total flux cleaned = -1.28398e-05 Jy ! Component: 200 - total flux cleaned = -2.84822e-05 Jy ! Total flux subtracted in 200 components = -2.84822e-05 Jy ! Clean residual min=-0.006449 max=0.006244 Jy/beam ! Clean residual mean=0.000013 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.247723 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.247723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110672Jy sigma=0.000640 ! Fit after self-cal, rms=0.110673Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110673Jy sigma=0.000640 ! Fit after self-cal, rms=0.110732Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=8.891 mas, bpa=-2.523 degrees ! Estimated noise=2939.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721317 Jy ! Component: 100 - total flux cleaned = 0.000698333 Jy ! Component: 150 - total flux cleaned = 0.000717591 Jy ! Component: 200 - total flux cleaned = 0.000734268 Jy ! Total flux subtracted in 200 components = 0.000734268 Jy ! Clean residual min=-0.005952 max=0.006759 Jy/beam ! Clean residual mean=0.000034 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.248457 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.248457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110742Jy sigma=0.000640 ! Fit after self-cal, rms=0.110742Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.89256e-05 Jy ! Component: 100 - total flux cleaned = 1.75737e-05 Jy ! Component: 150 - total flux cleaned = 3.51789e-05 Jy ! Component: 200 - total flux cleaned = 5.10481e-05 Jy ! Total flux subtracted in 200 components = 5.10481e-05 Jy ! Clean residual min=-0.005980 max=0.006706 Jy/beam ! Clean residual mean=0.000034 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.248508 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.248508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110744Jy sigma=0.000640 ! Fit after self-cal, rms=0.110745Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=6.168 mas, bpa=-15.36 degrees ! Estimated noise=2351.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 6.168 at -15.36 degrees (North through East) ! Clean map min=-0.006296 max=0.24066 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=5.462 mas, bpa=-17.82 degrees ! Estimated noise=2887.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187837 Jy ! Component: 100 - total flux cleaned = 0.229025 Jy ! Component: 150 - total flux cleaned = 0.241666 Jy ! Component: 200 - total flux cleaned = 0.247177 Jy ! Total flux subtracted in 200 components = 0.247177 Jy ! Clean residual min=-0.008485 max=0.007179 Jy/beam ! Clean residual mean=0.000003 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.247177 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.247177 Jy ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=6.168 mas, bpa=-15.36 degrees ! Estimated noise=2351.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012752 Jy ! Component: 100 - total flux cleaned = 0.00127732 Jy ! Component: 150 - total flux cleaned = 0.00113792 Jy ! Component: 200 - total flux cleaned = 0.00101951 Jy ! Total flux subtracted in 200 components = 0.00101951 Jy ! Clean residual min=-0.006470 max=0.006456 Jy/beam ! Clean residual mean=0.000014 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.248196 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.248196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=8.891 mas, bpa=-2.523 degrees ! Estimated noise=2939.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764708 Jy ! Component: 100 - total flux cleaned = 0.000687683 Jy ! Component: 150 - total flux cleaned = 0.000558581 Jy ! Component: 200 - total flux cleaned = 0.000454395 Jy ! Total flux subtracted in 200 components = 0.000454395 Jy ! Clean residual min=-0.006008 max=0.006752 Jy/beam ! Clean residual mean=0.000034 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.248651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.40673e-05 Jy ! Component: 100 - total flux cleaned = -8.22244e-05 Jy ! Component: 150 - total flux cleaned = -8.266e-05 Jy ! Component: 200 - total flux cleaned = -6.66536e-05 Jy ! Total flux subtracted in 200 components = -6.66536e-05 Jy ! Clean residual min=-0.006009 max=0.006672 Jy/beam ! Clean residual mean=0.000034 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.248584 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.248584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=6.168 mas, bpa=-15.36 degrees ! Estimated noise=2351.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62691e-05 Jy ! Component: 100 - total flux cleaned = -0.000243371 Jy ! Component: 150 - total flux cleaned = -0.000434749 Jy ! Component: 200 - total flux cleaned = -0.000503256 Jy ! Total flux subtracted in 200 components = -0.000503256 Jy ! Clean residual min=-0.006497 max=0.006172 Jy/beam ! Clean residual mean=0.000014 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.248081 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.248081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110746Jy sigma=0.000640 ! Fit after self-cal, rms=0.110748Jy sigma=0.000640 wmodel J1419+3821_S_2017_01_21_pus_map.mod ! Writing 51 model components to file: J1419+3821_S_2017_01_21_pus_map.mod wobs J1419+3821_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1419+3821_S_2017_01_21_pus_uvs.fits wwins J1419+3821_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1419+3821_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471406 Jy ! Component: 100 - total flux cleaned = -0.00122527 Jy ! Component: 150 - total flux cleaned = -0.00157642 Jy ! Component: 200 - total flux cleaned = -0.00207947 Jy ! Component: 250 - total flux cleaned = -0.00199822 Jy ! Component: 300 - total flux cleaned = -0.00230391 Jy ! Component: 350 - total flux cleaned = -0.00208041 Jy ! Component: 400 - total flux cleaned = -0.00215326 Jy ! Component: 450 - total flux cleaned = -0.00194106 Jy ! Component: 500 - total flux cleaned = -0.00180571 Jy ! Component: 550 - total flux cleaned = -0.00180644 Jy ! Component: 600 - total flux cleaned = -0.00180581 Jy ! Component: 650 - total flux cleaned = -0.00142388 Jy ! Component: 700 - total flux cleaned = -0.00130062 Jy ! Component: 750 - total flux cleaned = -0.00117951 Jy ! Component: 800 - total flux cleaned = -0.0011795 Jy ! Component: 850 - total flux cleaned = -0.00106153 Jy ! Component: 900 - total flux cleaned = -0.00123527 Jy ! Component: 950 - total flux cleaned = -0.00117886 Jy ! Component: 1000 - total flux cleaned = -0.00134754 Jy ! Component: 1050 - total flux cleaned = -0.00156754 Jy ! Component: 1100 - total flux cleaned = -0.00156688 Jy ! Component: 1150 - total flux cleaned = -0.00162054 Jy ! Component: 1200 - total flux cleaned = -0.00167323 Jy ! Component: 1250 - total flux cleaned = -0.00177744 Jy ! Component: 1300 - total flux cleaned = -0.00182761 Jy ! Component: 1350 - total flux cleaned = -0.00187807 Jy ! Component: 1400 - total flux cleaned = -0.00207644 Jy ! Component: 1450 - total flux cleaned = -0.00212484 Jy ! Component: 1500 - total flux cleaned = -0.00231687 Jy ! Component: 1550 - total flux cleaned = -0.00250671 Jy ! Component: 1600 - total flux cleaned = -0.00264684 Jy ! Component: 1650 - total flux cleaned = -0.00283235 Jy ! Component: 1700 - total flux cleaned = -0.00287813 Jy ! Component: 1750 - total flux cleaned = -0.0030145 Jy ! Component: 1800 - total flux cleaned = -0.00323755 Jy ! Component: 1850 - total flux cleaned = -0.00323785 Jy ! Component: 1900 - total flux cleaned = -0.00336914 Jy ! Component: 1950 - total flux cleaned = -0.00345566 Jy ! Component: 2000 - total flux cleaned = -0.00349869 Jy ! Component: 2050 - total flux cleaned = -0.00366821 Jy ! Component: 2100 - total flux cleaned = -0.00383615 Jy ! Component: 2150 - total flux cleaned = -0.00383623 Jy ! Component: 2200 - total flux cleaned = -0.00400104 Jy ! Component: 2250 - total flux cleaned = -0.00404167 Jy ! Component: 2300 - total flux cleaned = -0.00412242 Jy ! Component: 2350 - total flux cleaned = -0.00428315 Jy ! Component: 2400 - total flux cleaned = -0.00440218 Jy ! Component: 2450 - total flux cleaned = -0.0045984 Jy ! Component: 2500 - total flux cleaned = -0.00467616 Jy ! Component: 2550 - total flux cleaned = -0.00471521 Jy ! Component: 2600 - total flux cleaned = -0.00475369 Jy ! Component: 2650 - total flux cleaned = -0.00490578 Jy ! Component: 2700 - total flux cleaned = -0.00501849 Jy ! Component: 2750 - total flux cleaned = -0.00505574 Jy ! Component: 2800 - total flux cleaned = -0.00509285 Jy ! Component: 2850 - total flux cleaned = -0.00523918 Jy ! Component: 2900 - total flux cleaned = -0.00531196 Jy ! Component: 2950 - total flux cleaned = -0.00545681 Jy ! Component: 3000 - total flux cleaned = -0.00559991 Jy ! Component: 3050 - total flux cleaned = -0.00567113 Jy ! Component: 3100 - total flux cleaned = -0.00602425 Jy ! Component: 3150 - total flux cleaned = -0.006024 Jy ! Component: 3200 - total flux cleaned = -0.00609376 Jy ! Component: 3250 - total flux cleaned = -0.00626689 Jy ! Component: 3300 - total flux cleaned = -0.00630114 Jy ! Component: 3350 - total flux cleaned = -0.00640374 Jy ! Component: 3400 - total flux cleaned = -0.00660736 Jy ! Component: 3450 - total flux cleaned = -0.00674221 Jy ! Component: 3500 - total flux cleaned = -0.00684298 Jy ! Component: 3550 - total flux cleaned = -0.00697681 Jy ! Component: 3600 - total flux cleaned = -0.00704328 Jy ! Component: 3650 - total flux cleaned = -0.00717507 Jy ! Component: 3700 - total flux cleaned = -0.00727362 Jy ! Component: 3750 - total flux cleaned = -0.00737159 Jy ! Component: 3800 - total flux cleaned = -0.00746905 Jy ! Component: 3850 - total flux cleaned = -0.00769496 Jy ! Component: 3900 - total flux cleaned = -0.00772694 Jy ! Component: 3950 - total flux cleaned = -0.00788657 Jy ! Component: 4000 - total flux cleaned = -0.00804545 Jy ! Component: 4050 - total flux cleaned = -0.00823492 Jy ! Total flux subtracted in 4096 components = -0.00826619 Jy ! Clean residual min=-0.002061 max=0.001754 Jy/beam ! Clean residual mean=-0.000010 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.239815 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 332 components and 0.239815 Jy ![Exited script file: muppet] wmap "J1419+3821_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 6.168 at -15.36 degrees (North through East) ! Clean map min=-0.0038533 max=0.241 Jy/beam ! Writing clean map to FITS file: J1419+3821_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.241002 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000550978 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.68586 0.68586 1.37172 2.74344 5.48688 10.9738 21.9475 43.8951 87.7901 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.241 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 6.168 at -15.36 degrees (North through East) ! Clean map min=-0.0038533 max=0.241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+3821_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:55:58 2019