! Started logfile: J1418-3509_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:30 2019 obs J1418-3509_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1418-3509_S_2017_05_01_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.71345 visibilities/baseline/integration-bin. ! Found source: J1418-3509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 9760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1418-3509_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 578 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.669923Jy sigma=0.003383 ! Fit after self-cal, rms=0.601113Jy sigma=0.002992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=6.01 mas, bpa=-1.586 degrees ! Estimated noise=2169.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310929 Jy ! Component: 100 - total flux cleaned = 0.426421 Jy ! Total flux subtracted in 100 components = 0.426421 Jy ! Clean residual min=-0.023682 max=0.061857 Jy/beam ! Clean residual mean=-0.000022 rms=0.007863 Jy/beam ! Combined flux in latest and established models = 0.426421 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.426421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187524Jy sigma=0.000938 ! Fit after self-cal, rms=0.187396Jy sigma=0.000937 ! Inverting map ! Added new window around map position (-4, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636501 Jy ! Component: 100 - total flux cleaned = 0.100578 Jy ! Total flux subtracted in 100 components = 0.100578 Jy ! Clean residual min=-0.014707 max=0.033509 Jy/beam ! Clean residual mean=0.000002 rms=0.004457 Jy/beam ! Combined flux in latest and established models = 0.526998 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.526998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160675Jy sigma=0.000754 ! Fit after self-cal, rms=0.160091Jy sigma=0.000751 ! Inverting map ! Added new window around map position (3.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300232 Jy ! Component: 100 - total flux cleaned = 0.0481215 Jy ! Total flux subtracted in 100 components = 0.0481215 Jy ! Clean residual min=-0.012905 max=0.018367 Jy/beam ! Clean residual mean=0.000009 rms=0.003304 Jy/beam ! Combined flux in latest and established models = 0.57512 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.57512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153702Jy sigma=0.000709 ! Fit after self-cal, rms=0.153685Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.552 mas, bpa=0.8469 degrees ! Estimated noise=1580.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132478 Jy ! Component: 100 - total flux cleaned = 0.0204189 Jy ! Component: 150 - total flux cleaned = 0.0226779 Jy ! Component: 200 - total flux cleaned = 0.0237115 Jy ! Total flux subtracted in 200 components = 0.0237115 Jy ! Clean residual min=-0.015789 max=0.013986 Jy/beam ! Clean residual mean=0.000044 rms=0.003503 Jy/beam ! Combined flux in latest and established models = 0.598831 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 0.598831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152631Jy sigma=0.000701 ! Fit after self-cal, rms=0.152639Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 1.43 KP 1.03 ! LA 1.01 MK 0.99 NL 0.96 OV 1.01 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.42 KP 1.00 ! LA 0.95 MK 1.00 NL 1.06 OV 1.05 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.36 KP 1.01 ! LA 0.99 MK 1.02 NL 1.04 OV 0.97 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.30 KP 1.00* ! LA 1.00* MK 0.97 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.152639Jy sigma=0.000701 ! Fit after self-cal, rms=0.161466Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.509 mas, bpa=1.714 degrees ! Estimated noise=1601.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00864144 Jy ! Component: 100 - total flux cleaned = -0.00937622 Jy ! Component: 150 - total flux cleaned = -0.00998574 Jy ! Component: 200 - total flux cleaned = -0.0103339 Jy ! Total flux subtracted in 200 components = -0.0103339 Jy ! Clean residual min=-0.008322 max=0.009017 Jy/beam ! Clean residual mean=0.000006 rms=0.002250 Jy/beam ! Combined flux in latest and established models = 0.588497 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.588497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160598Jy sigma=0.000672 ! Fit after self-cal, rms=0.160786Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160786Jy sigma=0.000671 ! Fit after self-cal, rms=0.163341Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.523 mas, bpa=1.976 degrees ! Estimated noise=1598.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00625212 Jy ! Component: 100 - total flux cleaned = -0.0068342 Jy ! Component: 150 - total flux cleaned = -0.00717825 Jy ! Component: 200 - total flux cleaned = -0.00762585 Jy ! Total flux subtracted in 200 components = -0.00762585 Jy ! Clean residual min=-0.007080 max=0.008132 Jy/beam ! Clean residual mean=0.000004 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.580872 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.580871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162797Jy sigma=0.000668 ! Fit after self-cal, rms=0.162829Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300201 Jy ! Component: 100 - total flux cleaned = -0.000428721 Jy ! Component: 150 - total flux cleaned = -0.000662851 Jy ! Component: 200 - total flux cleaned = -0.000878134 Jy ! Total flux subtracted in 200 components = -0.000878134 Jy ! Clean residual min=-0.006921 max=0.007901 Jy/beam ! Clean residual mean=0.000005 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.579993 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.579993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162643Jy sigma=0.000668 ! Fit after self-cal, rms=0.162643Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162643Jy sigma=0.000668 ! Fit after self-cal, rms=0.166143Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=7.515 mas, bpa=2.165 degrees ! Estimated noise=1597.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240404 Jy ! Component: 100 - total flux cleaned = -0.00250228 Jy ! Component: 150 - total flux cleaned = -0.00267001 Jy ! Component: 200 - total flux cleaned = -0.00274492 Jy ! Total flux subtracted in 200 components = -0.00274492 Jy ! Clean residual min=-0.005047 max=0.006852 Jy/beam ! Clean residual mean=-0.000009 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.577248 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.577248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165993Jy sigma=0.000662 ! Fit after self-cal, rms=0.166040Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595094 Jy ! Component: 100 - total flux cleaned = 0.00760737 Jy ! Component: 150 - total flux cleaned = 0.00846863 Jy ! Component: 200 - total flux cleaned = 0.00894246 Jy ! Total flux subtracted in 200 components = 0.00894246 Jy ! Clean residual min=-0.004659 max=0.004004 Jy/beam ! Clean residual mean=-0.000000 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.586191 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.586191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165769Jy sigma=0.000660 ! Fit after self-cal, rms=0.165766Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165766Jy sigma=0.000660 ! Fit after self-cal, rms=0.166956Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.39 mas, bmaj=24.14 mas, bpa=6.46 degrees ! Estimated noise=1921.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244894 Jy ! Component: 100 - total flux cleaned = 0.000384603 Jy ! Component: 150 - total flux cleaned = 0.000588572 Jy ! Component: 200 - total flux cleaned = 0.000649206 Jy ! Total flux subtracted in 200 components = 0.000649206 Jy ! Clean residual min=-0.004448 max=0.004877 Jy/beam ! Clean residual mean=0.000002 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.58684 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 0.58684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166907Jy sigma=0.000660 ! Fit after self-cal, rms=0.166914Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27186e-05 Jy ! Component: 100 - total flux cleaned = 0.000112165 Jy ! Component: 150 - total flux cleaned = 0.000193694 Jy ! Component: 200 - total flux cleaned = 0.000218093 Jy ! Total flux subtracted in 200 components = 0.000218093 Jy ! Clean residual min=-0.004435 max=0.004834 Jy/beam ! Clean residual mean=0.000003 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.587058 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 152 components and 0.587058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166895Jy sigma=0.000660 ! Fit after self-cal, rms=0.166896Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.505 mas, bpa=2.249 degrees ! Estimated noise=1595.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.505 at 2.249 degrees (North through East) ! Clean map min=-0.0045655 max=0.41465 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=5.934 mas, bpa=-0.1919 degrees ! Estimated noise=2200.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.313592 Jy ! Component: 100 - total flux cleaned = 0.430696 Jy ! Component: 150 - total flux cleaned = 0.4915 Jy ! Component: 200 - total flux cleaned = 0.524986 Jy ! Total flux subtracted in 200 components = 0.524986 Jy ! Clean residual min=-0.009920 max=0.016763 Jy/beam ! Clean residual mean=-0.000012 rms=0.002776 Jy/beam ! Combined flux in latest and established models = 0.524987 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.524987 Jy ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.505 mas, bpa=2.249 degrees ! Estimated noise=1595.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246097 Jy ! Component: 100 - total flux cleaned = 0.0371668 Jy ! Component: 150 - total flux cleaned = 0.0450913 Jy ! Component: 200 - total flux cleaned = 0.0505152 Jy ! Total flux subtracted in 200 components = 0.0505152 Jy ! Clean residual min=-0.004654 max=0.004264 Jy/beam ! Clean residual mean=-0.000006 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.575502 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 53 components and 0.575502 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.39 mas, bmaj=24.14 mas, bpa=6.46 degrees ! Estimated noise=1921.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456958 Jy ! Component: 100 - total flux cleaned = 0.00732793 Jy ! Component: 150 - total flux cleaned = 0.00912831 Jy ! Component: 200 - total flux cleaned = 0.0103194 Jy ! Total flux subtracted in 200 components = 0.0103194 Jy ! Clean residual min=-0.004302 max=0.004815 Jy/beam ! Clean residual mean=-0.000000 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.585821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793991 Jy ! Component: 100 - total flux cleaned = 0.00111804 Jy ! Component: 150 - total flux cleaned = 0.00127145 Jy ! Component: 200 - total flux cleaned = 0.001389 Jy ! Total flux subtracted in 200 components = 0.001389 Jy ! Clean residual min=-0.004282 max=0.004814 Jy/beam ! Clean residual mean=0.000002 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.58721 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 98 components and 0.58721 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.505 mas, bpa=2.249 degrees ! Estimated noise=1595.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.234e-05 Jy ! Component: 100 - total flux cleaned = 0.000137129 Jy ! Component: 150 - total flux cleaned = 0.000193137 Jy ! Component: 200 - total flux cleaned = 0.000244383 Jy ! Total flux subtracted in 200 components = 0.000244383 Jy ! Clean residual min=-0.004401 max=0.004177 Jy/beam ! Clean residual mean=0.000001 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.587454 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.587455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166754Jy sigma=0.000660 ! Fit after self-cal, rms=0.166723Jy sigma=0.000660 wmodel J1418-3509_S_2017_05_01_pus_map.mod ! Writing 109 model components to file: J1418-3509_S_2017_05_01_pus_map.mod wobs J1418-3509_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1418-3509_S_2017_05_01_pus_uvs.fits wwins J1418-3509_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1418-3509_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000567524 Jy ! Component: 100 - total flux cleaned = -0.000908921 Jy ! Component: 150 - total flux cleaned = -0.00149182 Jy ! Component: 200 - total flux cleaned = -0.00205168 Jy ! Component: 250 - total flux cleaned = -0.00252944 Jy ! Component: 300 - total flux cleaned = -0.0029882 Jy ! Component: 350 - total flux cleaned = -0.00348786 Jy ! Component: 400 - total flux cleaned = -0.00391711 Jy ! Component: 450 - total flux cleaned = -0.00407347 Jy ! Component: 500 - total flux cleaned = -0.00422564 Jy ! Component: 550 - total flux cleaned = -0.00437311 Jy ! Component: 600 - total flux cleaned = -0.00451754 Jy ! Component: 650 - total flux cleaned = -0.00465917 Jy ! Component: 700 - total flux cleaned = -0.00465839 Jy ! Component: 750 - total flux cleaned = -0.00474804 Jy ! Component: 800 - total flux cleaned = -0.00470353 Jy ! Component: 850 - total flux cleaned = -0.00461629 Jy ! Component: 900 - total flux cleaned = -0.00465899 Jy ! Component: 950 - total flux cleaned = -0.00470068 Jy ! Component: 1000 - total flux cleaned = -0.00465871 Jy ! Component: 1050 - total flux cleaned = -0.00465839 Jy ! Component: 1100 - total flux cleaned = -0.00469942 Jy ! Component: 1150 - total flux cleaned = -0.00477893 Jy ! Component: 1200 - total flux cleaned = -0.00485725 Jy ! Component: 1250 - total flux cleaned = -0.00497236 Jy ! Component: 1300 - total flux cleaned = -0.00493419 Jy ! Component: 1350 - total flux cleaned = -0.00504823 Jy ! Component: 1400 - total flux cleaned = -0.00519763 Jy ! Component: 1450 - total flux cleaned = -0.00545411 Jy ! Component: 1500 - total flux cleaned = -0.00548942 Jy ! Component: 1550 - total flux cleaned = -0.00559641 Jy ! Component: 1600 - total flux cleaned = -0.0057017 Jy ! Component: 1650 - total flux cleaned = -0.00573619 Jy ! Component: 1700 - total flux cleaned = -0.00580492 Jy ! Component: 1750 - total flux cleaned = -0.0058731 Jy ! Component: 1800 - total flux cleaned = -0.00594068 Jy ! Component: 1850 - total flux cleaned = -0.00604032 Jy ! Component: 1900 - total flux cleaned = -0.00604037 Jy ! Component: 1950 - total flux cleaned = -0.00610549 Jy ! Component: 2000 - total flux cleaned = -0.00613734 Jy ! Component: 2050 - total flux cleaned = -0.00613722 Jy ! Component: 2100 - total flux cleaned = -0.00620017 Jy ! Component: 2150 - total flux cleaned = -0.00623123 Jy ! Component: 2200 - total flux cleaned = -0.0061696 Jy ! Component: 2250 - total flux cleaned = -0.00626156 Jy ! Component: 2300 - total flux cleaned = -0.00626175 Jy ! Component: 2350 - total flux cleaned = -0.00635196 Jy ! Component: 2400 - total flux cleaned = -0.00638155 Jy ! Component: 2450 - total flux cleaned = -0.0063228 Jy ! Component: 2500 - total flux cleaned = -0.00638146 Jy ! Component: 2550 - total flux cleaned = -0.00638127 Jy ! Component: 2600 - total flux cleaned = -0.00643885 Jy ! Component: 2650 - total flux cleaned = -0.0064955 Jy ! Component: 2700 - total flux cleaned = -0.00641097 Jy ! Component: 2750 - total flux cleaned = -0.00652301 Jy ! Component: 2800 - total flux cleaned = -0.00655062 Jy ! Component: 2850 - total flux cleaned = -0.00660581 Jy ! Component: 2900 - total flux cleaned = -0.00657846 Jy ! Component: 2950 - total flux cleaned = -0.00663288 Jy ! Component: 3000 - total flux cleaned = -0.00665981 Jy ! Component: 3050 - total flux cleaned = -0.0066867 Jy ! Component: 3100 - total flux cleaned = -0.00676652 Jy ! Component: 3150 - total flux cleaned = -0.00674026 Jy ! Component: 3200 - total flux cleaned = -0.00684509 Jy ! Component: 3250 - total flux cleaned = -0.00687112 Jy ! Component: 3300 - total flux cleaned = -0.00694861 Jy ! Component: 3350 - total flux cleaned = -0.00692286 Jy ! Component: 3400 - total flux cleaned = -0.00699941 Jy ! Component: 3450 - total flux cleaned = -0.00705033 Jy ! Component: 3500 - total flux cleaned = -0.00707555 Jy ! Component: 3550 - total flux cleaned = -0.00712573 Jy ! Component: 3600 - total flux cleaned = -0.00712563 Jy ! Component: 3650 - total flux cleaned = -0.00719993 Jy ! Component: 3700 - total flux cleaned = -0.00719968 Jy ! Component: 3750 - total flux cleaned = -0.00729769 Jy ! Component: 3800 - total flux cleaned = -0.00734633 Jy ! Component: 3850 - total flux cleaned = -0.0073706 Jy ! Component: 3900 - total flux cleaned = -0.00729826 Jy ! Component: 3950 - total flux cleaned = -0.00729847 Jy ! Component: 4000 - total flux cleaned = -0.00744177 Jy ! Component: 4050 - total flux cleaned = -0.00741812 Jy ! Total flux subtracted in 4096 components = -0.00746556 Jy ! Clean residual min=-0.001465 max=0.001541 Jy/beam ! Clean residual mean=0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.579989 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 421 components and 0.579989 Jy ![Exited script file: muppet] wmap "J1418-3509_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.505 at 2.249 degrees (North through East) ! Clean map min=-0.0032636 max=0.4263 Jy/beam ! Writing clean map to FITS file: J1418-3509_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.426302 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000445563 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.313555 0.313555 0.627109 1.25422 2.50844 5.01688 10.0338 20.0675 40.135 80.27 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.426 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.505 at 2.249 degrees (North through East) ! Clean map min=-0.0032636 max=0.4263 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1418-3509_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:34 2019