! Started logfile: J1418+1703_S_2017_10_21_pus_uvs.log on Sat May 11 20:59:43 2019 obs J1418+1703_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1418+1703_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.889082 visibilities/baseline/integration-bin. ! Found source: J1418+1703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1418+1703_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 905 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001387Jy sigma=0.010317 ! Fit after self-cal, rms=0.961913Jy sigma=0.009944 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=10.51 mas, bpa=-21.01 degrees ! Estimated noise=850.045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320162 Jy ! Component: 100 - total flux cleaned = 0.0378028 Jy ! Total flux subtracted in 100 components = 0.0378028 Jy ! Clean residual min=-0.005105 max=0.005468 Jy/beam ! Clean residual mean=-0.000015 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.0378028 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0378028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078468Jy sigma=0.000736 ! Fit after self-cal, rms=0.076914Jy sigma=0.000719 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.951 mas, bmaj=11.48 mas, bpa=-20.67 degrees ! Estimated noise=613.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400254 Jy ! Component: 100 - total flux cleaned = 0.00533171 Jy ! Component: 150 - total flux cleaned = 0.0057058 Jy ! Component: 200 - total flux cleaned = 0.00583709 Jy ! Total flux subtracted in 200 components = 0.00583709 Jy ! Clean residual min=-0.003543 max=0.002812 Jy/beam ! Clean residual mean=-0.000015 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0436399 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.0436399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076655Jy sigma=0.000717 ! Fit after self-cal, rms=0.076639Jy sigma=0.000717 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.08 KP 1.19 ! LA 1.04 MK 1.13 NL 0.99 OV 1.09 ! PT 0.79 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 1.06 KP 1.19 ! LA 0.97 MK 1.03 NL 1.14 OV 1.13 ! PT 0.84 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.11 HN 1.02 KP 1.08 ! LA 0.85 MK 1.08 NL 1.38 OV 1.01 ! PT 0.76 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.62 HN 1.07 KP 1.00* ! LA 0.99 MK 0.52 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.076639Jy sigma=0.000717 ! Fit after self-cal, rms=0.073285Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=11.38 mas, bpa=-20.26 degrees ! Estimated noise=611.858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5712e-05 Jy ! Component: 100 - total flux cleaned = 6.86221e-05 Jy ! Component: 150 - total flux cleaned = 6.90463e-05 Jy ! Component: 200 - total flux cleaned = 6.95394e-05 Jy ! Total flux subtracted in 200 components = 6.95394e-05 Jy ! Clean residual min=-0.001780 max=0.001799 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0437094 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.0437094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073279Jy sigma=0.000709 ! Fit after self-cal, rms=0.073658Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073658Jy sigma=0.000706 ! Fit after self-cal, rms=0.075782Jy sigma=0.000703 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.98 mas, bmaj=11.44 mas, bpa=-19.94 degrees ! Estimated noise=614.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52111e-05 Jy ! Component: 100 - total flux cleaned = -7.73025e-05 Jy ! Component: 150 - total flux cleaned = -8.83037e-05 Jy ! Component: 200 - total flux cleaned = -9.8401e-05 Jy ! Total flux subtracted in 200 components = -9.8401e-05 Jy ! Clean residual min=-0.001394 max=0.001366 Jy/beam ! Clean residual mean=-0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.043611 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.043611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075778Jy sigma=0.000703 ! Fit after self-cal, rms=0.076249Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307866 Jy ! Component: 100 - total flux cleaned = 0.000353384 Jy ! Component: 150 - total flux cleaned = 0.000353668 Jy ! Component: 200 - total flux cleaned = 0.000354346 Jy ! Total flux subtracted in 200 components = 0.000354346 Jy ! Clean residual min=-0.001732 max=0.001504 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0439654 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.0439654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076243Jy sigma=0.000702 ! Fit after self-cal, rms=0.076267Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076267Jy sigma=0.000701 ! Fit after self-cal, rms=0.078494Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=11.46 mas, bpa=-19.88 degrees ! Estimated noise=616.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86347e-05 Jy ! Component: 100 - total flux cleaned = 8.87415e-05 Jy ! Component: 150 - total flux cleaned = 7.74852e-05 Jy ! Component: 200 - total flux cleaned = 7.73234e-05 Jy ! Total flux subtracted in 200 components = 7.73234e-05 Jy ! Clean residual min=-0.001645 max=0.001273 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0440427 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.0440427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078490Jy sigma=0.000701 ! Fit after self-cal, rms=0.078770Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5449e-05 Jy ! Component: 100 - total flux cleaned = 9.58017e-05 Jy ! Component: 150 - total flux cleaned = 9.57241e-05 Jy ! Component: 200 - total flux cleaned = 9.6208e-05 Jy ! Total flux subtracted in 200 components = 9.6208e-05 Jy ! Clean residual min=-0.001799 max=0.001451 Jy/beam ! Clean residual mean=-0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0441389 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0441389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078765Jy sigma=0.000701 ! Fit after self-cal, rms=0.078779Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078779Jy sigma=0.000701 ! Fit after self-cal, rms=0.080127Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.446 mas, bmaj=12.6 mas, bpa=-15.55 degrees ! Estimated noise=704.123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26184e-05 Jy ! Component: 100 - total flux cleaned = -2.2969e-05 Jy ! Component: 150 - total flux cleaned = -2.21671e-05 Jy ! Component: 200 - total flux cleaned = -2.16323e-05 Jy ! Total flux subtracted in 200 components = -2.16323e-05 Jy ! Clean residual min=-0.001787 max=0.001516 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0441173 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.0441173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080125Jy sigma=0.000701 ! Fit after self-cal, rms=0.080285Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.92972e-05 Jy ! Component: 100 - total flux cleaned = 9.91457e-05 Jy ! Component: 150 - total flux cleaned = 9.88579e-05 Jy ! Component: 200 - total flux cleaned = 9.89077e-05 Jy ! Total flux subtracted in 200 components = 9.89077e-05 Jy ! Clean residual min=-0.001775 max=0.001608 Jy/beam ! Clean residual mean=0.000000 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0442162 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.0442162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080283Jy sigma=0.000700 ! Fit after self-cal, rms=0.080293Jy sigma=0.000700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=11.47 mas, bpa=-19.87 degrees ! Estimated noise=617.869 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.983 x 11.47 at -19.87 degrees (North through East) ! Clean map min=-0.0017808 max=0.042078 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=10.67 mas, bpa=-19.63 degrees ! Estimated noise=839.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324907 Jy ! Component: 100 - total flux cleaned = 0.0398642 Jy ! Component: 150 - total flux cleaned = 0.0424373 Jy ! Component: 200 - total flux cleaned = 0.0427953 Jy ! Total flux subtracted in 200 components = 0.0427953 Jy ! Clean residual min=-0.002342 max=0.002399 Jy/beam ! Clean residual mean=-0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0427953 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0427953 Jy ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=11.47 mas, bpa=-19.87 degrees ! Estimated noise=617.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111824 Jy ! Component: 100 - total flux cleaned = 0.00126706 Jy ! Component: 150 - total flux cleaned = 0.00129693 Jy ! Component: 200 - total flux cleaned = 0.00134354 Jy ! Total flux subtracted in 200 components = 0.00134354 Jy ! Clean residual min=-0.001820 max=0.001557 Jy/beam ! Clean residual mean=-0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0441389 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.0441388 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.446 mas, bmaj=12.6 mas, bpa=-15.55 degrees ! Estimated noise=704.123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.26116e-05 Jy ! Component: 100 - total flux cleaned = 7.55094e-05 Jy ! Component: 150 - total flux cleaned = 8.91208e-05 Jy ! Component: 200 - total flux cleaned = 8.94619e-05 Jy ! Total flux subtracted in 200 components = 8.94619e-05 Jy ! Clean residual min=-0.001738 max=0.001584 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0442283 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.91939e-07 Jy ! Component: 100 - total flux cleaned = -9.38112e-08 Jy ! Component: 150 - total flux cleaned = 3.41118e-07 Jy ! Component: 200 - total flux cleaned = 2.43215e-07 Jy ! Total flux subtracted in 200 components = 2.43215e-07 Jy ! Clean residual min=-0.001741 max=0.001586 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0442286 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.0442286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=11.47 mas, bpa=-19.87 degrees ! Estimated noise=617.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.31839e-05 Jy ! Component: 100 - total flux cleaned = -0.000126721 Jy ! Component: 150 - total flux cleaned = -0.000172504 Jy ! Component: 200 - total flux cleaned = -0.000182665 Jy ! Total flux subtracted in 200 components = -0.000182665 Jy ! Clean residual min=-0.001854 max=0.001459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0440459 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.0440459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080289Jy sigma=0.000700 ! Fit after self-cal, rms=0.080286Jy sigma=0.000700 wmodel J1418+1703_S_2017_10_21_pus_map.mod ! Writing 52 model components to file: J1418+1703_S_2017_10_21_pus_map.mod wobs J1418+1703_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1418+1703_S_2017_10_21_pus_uvs.fits wwins J1418+1703_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1418+1703_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375527 Jy ! Component: 100 - total flux cleaned = -0.000349864 Jy ! Component: 150 - total flux cleaned = -0.000394613 Jy ! Component: 200 - total flux cleaned = -0.000437906 Jy ! Component: 250 - total flux cleaned = -0.000480085 Jy ! Component: 300 - total flux cleaned = -0.000460046 Jy ! Component: 350 - total flux cleaned = -0.000440541 Jy ! Component: 400 - total flux cleaned = -0.000440549 Jy ! Component: 450 - total flux cleaned = -0.000385243 Jy ! Component: 500 - total flux cleaned = -0.000331532 Jy ! Component: 550 - total flux cleaned = -0.000296421 Jy ! Component: 600 - total flux cleaned = -0.000210539 Jy ! Component: 650 - total flux cleaned = -0.000126694 Jy ! Component: 700 - total flux cleaned = -6.11095e-05 Jy ! Component: 750 - total flux cleaned = -1.29217e-05 Jy ! Component: 800 - total flux cleaned = -1.31027e-05 Jy ! Component: 850 - total flux cleaned = 1.79342e-05 Jy ! Component: 900 - total flux cleaned = 6.36066e-05 Jy ! Component: 950 - total flux cleaned = 0.000108472 Jy ! Component: 1000 - total flux cleaned = 1.99858e-05 Jy ! Component: 1050 - total flux cleaned = 2.00885e-05 Jy ! Component: 1100 - total flux cleaned = 6.08857e-06 Jy ! Component: 1150 - total flux cleaned = -2.20152e-05 Jy ! Component: 1200 - total flux cleaned = -2.23381e-05 Jy ! Component: 1250 - total flux cleaned = -6.35139e-05 Jy ! Component: 1300 - total flux cleaned = -7.68089e-05 Jy ! Component: 1350 - total flux cleaned = -7.6829e-05 Jy ! Component: 1400 - total flux cleaned = -0.000102822 Jy ! Component: 1450 - total flux cleaned = -0.000102562 Jy ! Component: 1500 - total flux cleaned = -0.000140501 Jy ! Component: 1550 - total flux cleaned = -0.000178205 Jy ! Component: 1600 - total flux cleaned = -0.000165703 Jy ! Component: 1650 - total flux cleaned = -0.000214822 Jy ! Component: 1700 - total flux cleaned = -0.000214967 Jy ! Component: 1750 - total flux cleaned = -0.000287259 Jy ! Component: 1800 - total flux cleaned = -0.000322904 Jy ! Component: 1850 - total flux cleaned = -0.000381918 Jy ! Component: 1900 - total flux cleaned = -0.000416718 Jy ! Component: 1950 - total flux cleaned = -0.000474225 Jy ! Component: 2000 - total flux cleaned = -0.000496974 Jy ! Component: 2050 - total flux cleaned = -0.00054192 Jy ! Component: 2100 - total flux cleaned = -0.000620029 Jy ! Component: 2150 - total flux cleaned = -0.000664 Jy ! Component: 2200 - total flux cleaned = -0.000642225 Jy ! Component: 2250 - total flux cleaned = -0.00070729 Jy ! Component: 2300 - total flux cleaned = -0.000728769 Jy ! Component: 2350 - total flux cleaned = -0.000750194 Jy ! Component: 2400 - total flux cleaned = -0.00080286 Jy ! Component: 2450 - total flux cleaned = -0.00081318 Jy ! Component: 2500 - total flux cleaned = -0.000864719 Jy ! Component: 2550 - total flux cleaned = -0.000885169 Jy ! Component: 2600 - total flux cleaned = -0.000905357 Jy ! Component: 2650 - total flux cleaned = -0.000905382 Jy ! Component: 2700 - total flux cleaned = -0.000925367 Jy ! Component: 2750 - total flux cleaned = -0.000945167 Jy ! Component: 2800 - total flux cleaned = -0.000964788 Jy ! Component: 2850 - total flux cleaned = -0.000984263 Jy ! Component: 2900 - total flux cleaned = -0.00102282 Jy ! Component: 2950 - total flux cleaned = -0.000994025 Jy ! Component: 3000 - total flux cleaned = -0.00101307 Jy ! Component: 3050 - total flux cleaned = -0.00104152 Jy ! Component: 3100 - total flux cleaned = -0.00103213 Jy ! Component: 3150 - total flux cleaned = -0.0010508 Jy ! Component: 3200 - total flux cleaned = -0.00106925 Jy ! Component: 3250 - total flux cleaned = -0.00106002 Jy ! Component: 3300 - total flux cleaned = -0.00107831 Jy ! Component: 3350 - total flux cleaned = -0.00106022 Jy ! Component: 3400 - total flux cleaned = -0.00107834 Jy ! Component: 3450 - total flux cleaned = -0.00107839 Jy ! Component: 3500 - total flux cleaned = -0.00111392 Jy ! Component: 3550 - total flux cleaned = -0.00108742 Jy ! Component: 3600 - total flux cleaned = -0.00107867 Jy ! Component: 3650 - total flux cleaned = -0.00107868 Jy ! Component: 3700 - total flux cleaned = -0.00107867 Jy ! Component: 3750 - total flux cleaned = -0.00107868 Jy ! Component: 3800 - total flux cleaned = -0.00107865 Jy ! Component: 3850 - total flux cleaned = -0.00107863 Jy ! Component: 3900 - total flux cleaned = -0.00101115 Jy ! Component: 3950 - total flux cleaned = -0.00101118 Jy ! Component: 4000 - total flux cleaned = -0.000994542 Jy ! Component: 4050 - total flux cleaned = -0.000961342 Jy ! Total flux subtracted in 4096 components = -0.000961302 Jy ! Clean residual min=-0.000487 max=0.000565 Jy/beam ! Clean residual mean=0.000001 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0430846 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 339 components and 0.0430845 Jy ![Exited script file: muppet] wmap "J1418+1703_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.983 x 11.47 at -19.87 degrees (North through East) ! Clean map min=-0.0010175 max=0.042116 Jy/beam ! Writing clean map to FITS file: J1418+1703_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0421161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153232 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0915 1.0915 2.18299 4.36599 8.73197 17.4639 34.9279 69.8558 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.983 x 11.47 at -19.87 degrees (North through East) ! Clean map min=-0.0010175 max=0.042116 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1418+1703_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:59:48 2019